September 2010
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com
FSAV330 • Rev. 1.0.4
FAV330 — 4-Channel, 2:1 Video Switch
FSAV330 — 4-Channel, 2:1 Video Switch
Features
Replacement for the P15V330
Wide Bandwidth: 300MHz
4Ω Switch Connection between Two Ports
Minimal Propagation Delay through the Switch
Low lCC
Zero Bounce in Flow-through Mode
Control Inputs Compatible with TTL Level
Applications
Set-Top Boxes
Flat Panel Displays
CRT Displa ys
DVD - RW
Description
The FSAV330 video switch is a quad, single-pole /
double-throw, high-speed CMOS TTL-compatible video
switch. The low on resistance of the switch allows
inputs to be connected to outputs without adding
propagation delay or generating additional ground
bounce noise.
When /OE is LOW, the select pin connects the A port to
the selected B port output. When /OE is HIGH, the
switch is OPEN and a high-impedance state exists
between the two ports.
Ordering Information
Part Number Operating
Temperature Range Package Packing
Method
FSAV330MX -40 to +85°C 16-Lead, Small Outline Integrated Circuit (SOIC),
JEDEC MS-012, 0.150 inch Narrow Tape and Reel
FSAV330MTCX -40 to +85°C 16-, Thin Shrink Small Outline Package
(TSSOP), JEDEC MO-153, 4.4mm Wi de Tape and Reel
FSAV330QSCX -40 to +85°C 16-Lead, Quarter Size Outline Package (QSOP),
JEDEC MO-137, 0.150 inch Wide Tape and Reel
The Fairchild switch family derives from and embodi es Fairchild’ s proven switch technology used for s everal years in its
74LVX3L384 (FST3384) bus switc h product.
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com
FSAV330 • Rev. 1.0.4 2
FSAV330 — 4-Channel, 2:1 Video Switch
Pin Configurations
S
1B
1
1B
2
1A
2B
1
2B
2
2A
GND
V
CC
/OE
4B
1
4B
2
4A
3B
1
3B
2
3A
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
Figure 1. Logic Diagram Figure 2. Pin Assignments
Pin Descriptions
Pin # Name Description
15 /OE Bus Switch Enabled
1 S Select Input
4,7,9,12 A Bus A
2,3,5,6,10,11,13,14 B1-B2 Bus B
8 GND Ground
16 VCC Supply Voltage
Truth Table
S /OE Function
Don’t Care HIGH Disconnected
LOW LOW A=B1
HIGH LOW A=B2
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com
FSAV330 • Rev. 1.0.4 3
FSAV330 — 4-Channel, 2:1 Video Switch
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device
reliability. The absolute maximum ratings are stress ratings only.
Symbol Parameter Min. Max. Unit
VCC Supply Voltage -0.5 +7.0 V
VS DC Switch Voltage -0.5 +7.0 V
VIN DC Input Voltage(1) -0.5 +7.0 V
IIK DC Input Diode Current -50 mA
IOUT DC Output Sink Current 128 mA
ICC/IGND DC VCC / GND Current ±100 mA
TSTG Storage Temperature Range -65 +150 °C
ESD Human Body Model, JESD22-A114 4000 V
Note:
1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are
observed.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol Parameter Min. Max. Unit
VCC Power Supply 4.0 5.5 V
VIN Input Voltage 0 5.5 V
VOUT Output Voltage 0 5.5 V
tr, tf Input Rise and Fall Time Switch Control Input 0 5 ns/V
Switch I/O 0 DC
TA Operating Temperature, Free Air -40 +85 °C
Note:
2. Unused control inputs must be held HIGH or LOW; they may not float.
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com
FSAV330 • Rev. 1.0.4 4
FSAV330 — 4-Channel, 2:1 Video Switch
DC Electrical Characteristics
Typical values are at VCC=5.0V and TA= +25°C. Minimum and maximum values are at TA= -40 to +85°C.
Symbol Parameter Conditions VCC (V) Min. Typ. Max. Units
VANALOG Analog Signal Range 5.0 0 2 V
VIK Clamp Diode Voltage IIN=-18mA 4.5 -1.2 V
VIH High-Level Input Voltage 4.0 to 5.5 2.0 V
VIL Low-Level Input Voltage 4.0 to 5.5 0.8 V
II Input Leakage Current 0 ≤ VIN ≤ 5.5V 5.5 ±1.0 µA
IOZ Off-State Leakage Current 0 ≤ A, B ≤ VCC 5.5 ±1.0 µA
RON Switch On Resistance(3) VIN=1.0V, RI=75Ω, ION=13mA 4.5 3 7
Ω
VIN=2.0V, RI=75Ω, ION=26mA 4.5 7 10
ICC Quiescent Supply Current VIN=VCC or GND, IOUT=0 5.5 3 µA
ΔICC Increase in ICC per Input One Input at 3.4V
Other Inputs at VCC or GND 5.5 2.5 mA
Note:
3. Measured by the voltage drop between the A and B pins at the indicated current through the switch. On
resistance is determined by the lower of the voltages on the A or B pins.
AC Electrical Characteristics
TA=-40 to +85°C, CL=50pF, RU=RD=500Ω.
Symbol Parameter Conditions VCC=4.5 – 5.5V VCC=4.0V Units Figure
Min. Typ. Max. Min. Max.
tPZH, tPZL
Output Enable Time,
Select to Bus B VI=7V for tPZL
VI=Open for tPZH
5.2 5.7
ns Figure 3
Figure 4
Output Enable Time,
/OE to Bus A, B 5.1 5.6
tPHZ, tPLZ
Output Disable Time,
Select to Bus B VI=7V for tPLZ
VI=Open for tPHZ
5.2 5.5
ns Figure 3
Figure 4
Output Disable Time,
Output Enable Time
/OE to Bus A, B 5.5 5.5
BW -3dB Bandwidth(4) RL=150Ω, TA=25°C 300 MHz
XTALK Crosstalk RIN=10Ω,
RL=150Ω, f=10MHz -58 dB
DG Differential Gain RL=150Ω,
f=3.58MHz 0.64 %
DP Differential Phase RL=150Ω,
f=3.58MHz 0.1 °
OIRR Off Isolation RL=150Ω, f=10MHz -60 dB
Note:
4. This parameter is guaranteed by device characterization, not production tested.
Capacitance
TA=+25°C, f=1MHz. Capacitance is characterized, not production tested.
Symbol Parameter Conditions Typ. Units
CIN Control Pin Input Capacitance VCC=5.0V 3 pF
CI/O A Port Input / Output Capacitance VCC, /OE=5.0V 7 pF
B Port 5
CON Switch On Capacitance VCC=5.0V, /OE=0V 12 pF
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com
FSAV330 • Rev. 1.0.4 5
FSAV330 — 4-Channel, 2:1 Video Switch
AC Loadings and Waveforms
Notes:
5. Input drive by 50Ω source terminated in 50Ω.
6. CL includes load and stray capacitance.
7. Input PRR=1.0MHz, tW=500ns. Figure 3. AC Test Circuit
Figure 4. AC Waveforms
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com
FSAV330 • Rev. 1.0.4 6
FSAV330 — 4-Channel, 2:1 Video Switch
Physical Dimensions
X 45°
DETAIL A
SCALE: 2:1
8°
0°
NOTES: UNLESS OTHERWISE SPECIFIED
A) THIS PACKAGE CONFORMS TO JEDEC
MS-012, VARIATION AC, ISSUE C.
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD
FLASH AND TIE BAR PROTRUSIONS
D) CONFORMS TO ASME Y14.5M-1994
E) LANDPATTERN STANDARD: SOIC127P600X175-16AM
F) DRAWING FILE NAME: M16AREV12.
SEATING PLANE
GAGE PLANE
C
C0.10
SEE DETAIL A
LAND PATTERN RECOMMENDATION
PIN ONE
INDICATOR
1
16
8
M
0.25
9
CBA
B
A
5.6
1.27 0.65
1.75
10.00
9.80
8.89
6.00
1.27
(0.30)
0.51
0.35
1.75 MAX
1.50
1.25
0.25
0.10 0.25
0.19
(1.04)
0.90
0.50
0.36
(R0.10)
(R0.10)
0.50
0.25
4.00
3.80
Figure 5. 16-Lead, Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150-inch Narrow
Pack age drawings are provided as a service to customers consideri ng Fai rchild components . Drawings may c hange i n any manner
without notice. P l ease note the revi sion and/or date on t he drawing and contac t a Fairchild S emiconductor represent ative to v er ify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’ s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com
FSAV330 • Rev. 1.0.4 7
FSAV330 — 4-Channel, 2:1 Video Switch
Physical Dimensions
SIDE VIEW
TOP VIE W
DETAIL A
END VIEW
LAND PATTERN
RECOMMENDATION
Figure 6. 16-Lead, Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150-inch Wide
Pack age drawings are provi ded as a servic e to customers considering Fairc h i l d components. Drawi ngs may change in any manner
without notice. P l ease note the revi sion and/or date on t he drawing and contac t a Fairchild S emic onductor representative to v er ify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’ s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com
FSAV330 • Rev. 1.0.4 8
FSAV330 — 4-Channel, 2:1 Video Switch
Physical Dimensions
0.65
4.4±0.1
MTC16rev4
0.11
4.55
5.00
5.00±0.10
12°
7.354.45
1.45
5.90
Figure 7. 16-Lead, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Pack age drawings are provided as a service to customers consideri ng Fai rchild components . Drawings may c hange i n any manner
without notice. P l ease note the revi sion and/or date on t he drawing and contac t a Fairchild S emiconductor represent ative to v er ify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’ s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com
FSAV330 • Rev. 1.0.4 9
FSAV330 — 4-Channel, 2:1 Video Switch
