© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com
FSAV330 • Rev. 1.0.4 4
FSAV330 — 4-Channel, 2:1 Video Switch
DC Electrical Characteristics
Typical values are at VCC=5.0V and TA= +25°C. Minimum and maximum values are at TA= -40 to +85°C.
Symbol Parameter Conditions VCC (V) Min. Typ. Max. Units
VANALOG Analog Signal Range 5.0 0 2 V
VIK Clamp Diode Voltage IIN=-18mA 4.5 -1.2 V
VIH High-Level Input Voltage 4.0 to 5.5 2.0 V
VIL Low-Level Input Voltage 4.0 to 5.5 0.8 V
II Input Leakage Current 0 ≤ VIN ≤ 5.5V 5.5 ±1.0 µA
IOZ Off-State Leakage Current 0 ≤ A, B ≤ VCC 5.5 ±1.0 µA
RON Switch On Resistance(3) VIN=1.0V, RI=75Ω, ION=13mA 4.5 3 7
Ω
VIN=2.0V, RI=75Ω, ION=26mA 4.5 7 10
ICC Quiescent Supply Current VIN=VCC or GND, IOUT=0 5.5 3 µA
ΔICC Increase in ICC per Input One Input at 3.4V
Other Inputs at VCC or GND 5.5 2.5 mA
Note:
3. Measured by the voltage drop between the A and B pins at the indicated current through the switch. On
resistance is determined by the lower of the voltages on the A or B pins.
AC Electrical Characteristics
TA=-40 to +85°C, CL=50pF, RU=RD=500Ω.
Symbol Parameter Conditions VCC=4.5 – 5.5V VCC=4.0V Units Figure
Min. Typ. Max. Min. Max.
tPZH, tPZL
Output Enable Time,
Select to Bus B VI=7V for tPZL
VI=Open for tPZH
5.2 5.7
ns Figure 3
Figure 4
Output Enable Time,
/OE to Bus A, B 5.1 5.6
tPHZ, tPLZ
Output Disable Time,
Select to Bus B VI=7V for tPLZ
VI=Open for tPHZ
5.2 5.5
ns Figure 3
Figure 4
Output Disable Time,
Output Enable Time
/OE to Bus A, B 5.5 5.5
BW -3dB Bandwidth(4) RL=150Ω, TA=25°C 300 MHz
XTALK Crosstalk RIN=10Ω,
RL=150Ω, f=10MHz -58 dB
DG Differential Gain RL=150Ω,
f=3.58MHz 0.64 %
DP Differential Phase RL=150Ω,
f=3.58MHz 0.1 °
OIRR Off Isolation RL=150Ω, f=10MHz -60 dB
Note:
4. This parameter is guaranteed by device characterization, not production tested.
Capacitance
TA=+25°C, f=1MHz. Capacitance is characterized, not production tested.
Symbol Parameter Conditions Typ. Units
CIN Control Pin Input Capacitance VCC=5.0V 3 pF
CI/O A Port Input / Output Capacitance VCC, /OE=5.0V 7 pF
B Port 5
CON Switch On Capacitance VCC=5.0V, /OE=0V 12 pF