NTC Thermistor:
::
:TTF Series
Insulation Film Type for Temperature Sensing/Compensation
THINKING ELECTRONIC INDUSTRIAL CO., LTD.
55
www.thinking.com.tw
2013.08
All specifications are subject to change without notice.
Reliability
Item Standard Test conditions / Methods Specifications
Tensile Strength
of Terminals IEC 60068-2-21
Gradually apply the specified force and keep the unit fixed for
10±1 sec.
Terminal cross-sectional area
Force
(mm
2
) (Kg)
0.05<S 0.1 0.25
No visible damage
Bending Strength
of Terminals IEC 60068-2-21
Hold specimen and apply the force specified below to each lead.
Bend the specimen to 90°, and then return to the original position.
Repeat the procedure in the opposite direction.
Terminal cross-sectional area
Force
(mm
2
) (Kg)
0.05<S 0.1 0.125
No visible damage
Solderability IEC 60068-2-20
245 ± 3 , 3 ± 0.3 sec. At least 95% of terminal
electrode is covered by
new solder
Resistance to
Soldering Heat IEC 60068-2-20
260 ± 3 , 10 ± 1 sec. No visible damage
R
25
/R
25
3 %
High Temperature
Storage IEC 600C68-2-2
100 ± 5 , 1000 ± 24 hrs No visible damage
R
25
/R
25
5 %
Damp Heat,
Steady State IEC 60068-2-78
40 ± 2 , 90~95% RH, 1000 ± 24 hrs No visible damage
R
25
/R
25
3 %
Rapid Change of
Temperature IEC 60068-2-14
The conditions shown below shall be repeated 5 cycles.
Step Temperature ( ) Period (minutes)
1 -40 ± 5 30 ± 3
2 Room temperature 5 ± 3
3 100 ± 5 30 ± 3
4 Room temperature 5 ± 3
No visible damage
R
25
/R
25
3 %
Power Dissipation
IEC 60539-1 25 ± 5 , Pmax. , 1000 ± 24 hrs No visible damage
R
25
/R
25
5 %
Packaging
Bulk Packing: 500 pcs/ bag
Warehouse Storage Conditions of Products
Storage Conditions:
1. Storage Temperature: -10~+40
2. Relative Humidity: 75%RH
3. Keep away from corrosive atmosphere and sunlight.
Period of Storage: 1 year