PHOTOCOUPLER PS2532-1,-2,-4,PS2532L-1,-2,-4 HIGH COLLECTOR TO EMITTER VOLTATGE HIGH ISOLATION VOLTAGE MULTI PHOTOCOUPLER SERIES -NEPOC Series- DESCRIPTION The PS2532-1, -2, -4 and PS2532L-1, -2, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon darlington connected phototransistor. The PS2532-1, -2, -4 are in a plastic DIP (Dual In-line Package) and the PS2532L-1, -2, -4 are lead bending type (Gull-wing) for surface mount. FEATURES * High collector to emitter voltage (VCEO = 300 V) * High Isolation voltage (BV = 5 000 Vr.m.s.) * High current transfer ratio (CTR = 4 000 % TYP.) * High-speed switching (tr, tf = 100 s TYP.) * Ordering number of tape product: PS2532L-1-E3, E4, F3, F4, PS2532L-2-E3, E4 * Safety standards * UL approved: File No. E72422 (S) * BSI approved: No. 8221/8222 * CSA approved: No. CA 101391 * NEMKO approved: No. P98101708 * SEMKO approved: No. 9824187/01-02 * DEMKO approved: No. 307863 * FIMKO approved: No. F1 11397 * VDE0884 approved (Option) APPLICATIONS * Telephone, Exchange equipment * FAX/MODEM Document No. PN10232EJ01V0DS (1st edition) (Previous No. P11434EJ6V0DS00) Date Published February 2003 CP(K) The mark shows major revised points. PS2532-1,-2,-4,PS2532L-1,-2,-4 PACKAGE DIMENSIONS (Unit : mm) DIP Type (New package) PS2532-1 4.60.35 3 6.50.5 1. Anode 2. Cathode 3. Emitter 4. Collector 1 2 7.62 3.50.3 3.20.4 4.150.4 TOP VIEW 4 0 to 15 +0.1 0.25 -0.05 1.250.15 0.500.10 0.25 M 2.54 Caution New package 1-ch only DIP Type PS2532-1 4 9.70.5 3 3.30.5 4.150.4 2 7.62 3.50.3 1 0 to 15 +0.1 0.25 -0.05 1.250.15 8 1 0.500.10 1.250.15 0.500.10 0.25 M TOP VIEW 7 6 5 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 6.50.5 1. Anode 2. Cathode 3. Emitter 4. Collector 6.50.5 3.30.5 4.150.4 PS2532-2 TOP VIEW 2 3 4 7.62 3.50.3 4.60.5 0 to 15 +0.1 0.25 -0.05 0.25 M 2.54 2.54 PS2532-4 6.50.5 19.80.5 TOP VIEW 16 15 14 13 12 11 10 9 1 2 3.50.3 3.30.5 4.150.4 7.62 0.500.10 1.250.15 2.54 2 0 to 15 +0.1 0.25 -0.05 0.25 M Data Sheet PN10232EJ01V0DS 3 4 5 6 7 8 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector PS2532-1,-2,-4,PS2532L-1,-2,-4 Lead Bending Type (New package) PS2532L-1 TOP VIEW 4.60.35 4 3 6.50.5 1. Anode 2. Cathode 3. Emitter 4. Collector 2 0.1 +0.1 -0.05 3.50.3 0.25 +0.1 -0.05 1 0.90.25 9.600.4 1.250.15 0.25 M 2.54 0.15 Caution New package 1-ch only Lead Bending Type PS2532L-2 PS2532L-1 TOP VIEW 0.90.25 9.600.4 0.25 M 1 1.250.15 0.25 M 6 5 2 3 4 0.15 2.54 0.90.25 9.600.4 0.15 PS2532L-4 TOP VIEW 16 15 14 13 12 11 10 9 6.50.5 19.80.5 1.250.15 0.25 M 2.54 0.15 2 3 4 5 6 7 8 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector 0.1 +0.1 -0.05 0.25 +0.1 -0.05 1 3.50.3 2.54 7 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 3.50.3 0.1 +0.1 -0.05 3.50.3 0.25 +0.1 -0.05 2 1.250.15 8 6.50.5 6.50.5 1. Anode 2. Cathode 3. Emitter 4. Collector 1 TOP VIEW 9.70.5 3 0.1 +0.1 -0.05 4 0.25 +0.1 -0.05 4.60.5 0.90.25 9.600.4 Data Sheet PN10232EJ01V0DS 3 PS2532-1,-2,-4,PS2532L-1,-2,-4 MARKING EXAMPLE PS2532-1 PS2532-2, -4 No. 1 pin Mark No. 1 pin Mark 2532 M 003 M Assembly Lot 0 03 M Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Standard PKG New PKG 4 PS2532-2 M 003 Made in Japan Made in Taiwan Blank F Data Sheet PN10232EJ01V0DS 0 03 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Standard PKG New PKG E Country Assembled Type Number Assembly Lot Made in Japan Made in Taiwan Blank F PS2532-1,-2,-4,PS2532L-1,-2,-4 ORDERING INFORMATION (Solder Contains Lead) Part Number PS2532-1 Package 4-pin DIP Packing Style Magazine case 100 pcs PS2532L-1 Safety Standard Application Part Approval Number Standard products *1 PS2532-1 (UL, CSA, BSI, PS2532L-1-E3 Embossed Tape 1 000 pcs/reel PS2532L-1-E4 NEMKO, SEMKO, DEMKO, FIMKO PS2532L-1-F3 Embossed Tape 2 000 pcs/reel approved) PS2532L-1-F4 PS2532-2 8-pin DIP Magazine case 45 pcs PS2532-2 PS2532L-2 PS2532L-2-E3 Embossed Tape 1 000 pcs/reel PS2532L-2-E4 PS2532-4 16-pin DIP Magazine case 20 pcs 4-pin DIP Magazine case 100 pcs PS2532-4 PS2532L-4 PS2532-1-V PS2532L-1-V VDE0884 approved PS2532-1 products (Option) PS2532L-1-V-E3 Embossed Tape 1 000 pcs/reel PS2532L-1-V-E4 PS2532L-1-V-F3 Embossed Tape 2 000 pcs/reel PS2532L-1-V-F4 PS2532L-2-V 8-pin DIP Magazine case 45 pcs PS2532-2 PS2532L-2-V PS2532L-2-V-E3 Embossed Tape 1 000 pcs/reel PS2532L-2-V-E4 PS2532-4-V 16-pin DIP Magazine case 20 pcs PS2532-4 PS2532L-4-V *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10232EJ01V0DS 5 PS2532-1,-2,-4,PS2532L-1,-2,-4 ORDERING INFORMATION (Pb-Free) Part Number PS2532-1-A Package 4-pin DIP Packing Style Magazine case 100 pcs PS2532L-1-A Safety Standard Application Part Approval Number Standard products *1 PS2532-1 (UL, CSA, BSI, PS2532L-1-E3-A Embossed Tape 1 000 pcs/reel PS2532L-1-E4-A NEMKO, SEMKO, DEMKO, FIMKO PS2532L-1-F3-A Embossed Tape 2 000 pcs/reel approved) PS2532L-1-F4-A PS2532-2-A 8-pin DIP Magazine case 45 pcs PS2532-2 PS2532L-2-A PS2532L-2-E3-A Embossed Tape 1 000 pcs/reel PS2532L-2-E4-A PS2532-4-A 16-pin DIP Magazine case 20 pcs 4-pin DIP Magazine case 100 pcs PS2532-4 PS2532L-4-A PS2532-1-V-A PS2532L-1-V-A VDE0884 approved PS2532-1 products (Option) PS2532L-1-V-E3-A Embossed Tape 1 000 pcs/reel PS2532L-1-V-E4-A PS2532L-1-V-F3-A Embossed Tape 2 000 pcs/reel PS2532L-1-V-F4-A PS2532L-2-V-A 8-pin DIP Magazine case 45 pcs PS2532-2 PS2532L-2-V-A PS2532L-2-V-E3-A Embossed Tape 1 000 pcs/reel PS2532L-2-V-E4-A PS2532-4-V-A 16-pin DIP Magazine case 20 pcs PS2532L-4-V-A *1 For the application of the Safety Standard, following part number should be used. 6 Data Sheet PN10232EJ01V0DS PS2532-4 PS2532-1,-2,-4,PS2532L-1,-2,-4 ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Ratings Diode Symbol Forward Current (DC) IF 80 mA Reverse Voltage VR 6 V Power Dissipation Derating Power Dissipation Peak Forward Current Transistor PS2532-2, -4, PS2532L-2, 4 PS2532-1, PS2532L-1 Parameter *1 Unit PD/C 1.5 1.2 mWC PD 150 120 mW/ch IFP 1 A Collector to Emitter Voltage VCEO 300 V Emitter to Collector Voltage VECO 0.6 V IC 150 mA/ch Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage *2 PC/C 3.0 2.4 mW/C PC 300 240 mW/ch BV 5 000 Vr.m.s. Operating Ambient Temperature TA -55 to +100 C Storage Temperature Tstg -55 to +150 C *1 PW = 100 s, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output Data Sheet PN10232EJ01V0DS 7 PS2532-1,-2,-4,PS2532L-1,-2,-4 ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Diode Symbol Conditions Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1.0 MHz MIN. TYP. MAX. Unit 1.15 1.40 V 5 A 30 pF Transistor Collector to Emitter Dark Current ICEO VCE = 300 V, IF = 0 mA Coupled Current Transfer Ratio (IC/IF) CTR IF = 1 mA, VCE = 2 V Collector Saturation Voltage VCE(sat) IF = 1 mA, IC = 2 mA Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz 0.6 pF VCC = 5 V, IC = 10 mA, RL = 100 100 s Rise Time Fall Time *1 *1 tr tf VCC (PW = 1 ms, Duty cycle = 1/10) IF 50 8 10 4 000 VOUT RL = 100 Data Sheet PN10232EJ01V0DS nA 6 500 % 1.0 V 11 100 *1 Test circuit for switching time Pulse input 1 500 400 PS2532-1,-2,-4,PS2532L-1,-2,-4 TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 150 PS2532-1 PS2532L-1 100 1.5 mW/C PS2532-2, -4 PS2532L-2, -4 50 1.2 mW/C 0 25 50 75 100 125 300 PS2532-1 PS2532L-1 200 PS2532-2, -4 PS2532L-2, -4 3.0 mW/C 100 2.4 mW/C 0 150 25 50 75 100 150 Ambient Temperature TA (C) FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 160 TA = +100 C +75 C +50 C Collector Current IC (mA) 10 140 +25 C 0 C -25 C -55 C 1 0.1 5.0 120 4.5 mA mA A m 4.0 mA 3.5 mA 3.0 mA 2.5 A 2.0 m 100 80 1.5 mA 60 1.0 mA 40 20 0.01 0.6 0.8 1.0 1.2 1.4 1.6 0 IF = 0.5 mA 1 2 3 4 5 6 7 8 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 10 500 VCE = 300 V 1 Collector Current IC (mA) Collector to Emitter Dark Current ICEO (A) 125 Ambient Temperature TA (C) 100 Forward Current IF (mA) 400 100 n 10 n 1n 100 p -50 -25 0 25 50 75 100 mA IF = 5.0 A 2.0 m 1.0 mA 100 50 0.5 mA 10 5 1 0.5 0.1 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Collector Saturation Voltage VCE(sat) (V) Ambient Temperature TA (C) Data Sheet PN10232EJ01V0DS 9 PS2532-1,-2,-4,PS2532L-1,-2,-4 CURRENT TRANSFER RATIO vs. FORWARD CURRENT ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; 0.8 0.6 0.4 Normalized to 1.0 at TA = 25 C, IF = 1 mA, VCE = 2 V 0.2 0.0 -50 -25 0 25 50 75 4 000 2 000 1 000 0 0.1 1 5 10 15 SWITCHING TIME vs. LOAD RESISTANCE FREQUENCY RESPONSE 5 tr 0 td 50 tf 10 5 50 100 200 500 2k -20 -30 0.01 1.0 IF = 1 mA, TA = 25 C IF = 1 mA, TA = 60 C 0.4 0.2 102 103 104 1 k 1 F Vin 47 0.1 RL Vout 1 Frequency f (kHz) LONG TERM CTR DEGRADATION 0.6 105 10 VCE = 4 V, Vin = 0.1 Vp-p -15 1.2 0.8 100 -10 -25 1k RL = 1 k -5 Load Resistance RL () CTR (Relative Value) 0.5 Forward Current IF (mA) ts 106 Time (Hr) Remark The graphs indicate nominal characteristics. 10 Sample A B 3 000 100 100 0.0 10 VCE = 2 V Ambient Temperature TA (C) VCC = 10 V, IC = 10 mA 1 20 Current Transfer Ratio CTR (%) 1.0 500 Switching Time t (s) 5 000 1.2 Normalized Gain Gv Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE Data Sheet PN10232EJ01V0DS 10 100 PS2532-1,-2,-4,PS2532L-1,-2,-4 TAPING SPECIFICATIONS (Unit : mm) 1.550.1 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 5.30.1 8.00.1 0.4 Tape Direction PS2532L-1-E3 PS2532L-1-E4 Outline and Dimensions (Reel) 2.00.5 21.00.8 80.01.0 R 1.0 2542.0 2.00.5 13.00.2 17.51.0 21.51.0 Packing: 1 000 pcs/reel Data Sheet PN10232EJ01V0DS 15.9 to 19.4 Outer edge of flange 11 PS2532-1,-2,-4,PS2532L-1,-2,-4 1.550.1 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 5.30.1 8.00.1 0.4 Tape Direction PS2532L-1-F3 PS2532L-1-F4 Outline and Dimensitons (Reel) 2.00.5 21.00.8 1001.0 R 1.0 3302.0 2.00.5 13.00.2 17.51.0 21.51.0 Packing: 2 000 pcs/reel 12 Data Sheet PN10232EJ01V0DS 15.9 to 19.4 Outer edge of flange PS2532-1,-2,-4,PS2532L-1,-2,-4 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 10.40.1 1.550.1 12.00.1 0.3 Tape Direction PS2532L-2-E4 PS2532L-2-E3 Outline and dimensions (Reel) R 1.0 1001.0 2.00.5 13.00.2 3302.0 2.00.5 21.00.8 17.51.0 21.51.0 Packing: 1 000 pcs/reel Data Sheet PN10232EJ01V0DS 15.9 to 19.4 Outer edge of flange 13 PS2532-1,-2,-4,PS2532L-1,-2,-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature 260C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220C 60 seconds or less * Time to preheat temperature from 120 to 180C 12030 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature 260C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120C or below (package surface temperature) * Number of times One (Allowed to be dipped in solder including plastic mold portion.) * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. 14 Data Sheet PN10232EJ01V0DS PS2532-1,-2,-4,PS2532L-1,-2,-4 USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10232EJ01V0DS 15 PS2532-1,-2,-4,PS2532L-1,-2,-4 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT (VDE0884) Parameter Symbol Speck Unit Application classification (DIN VDE 0109) for rated line voltages 300 Vr.m.s. IV for rated line voltages 600 Vr.m.s. III Climatic test class (DIN IEC 68 Teil 1/09.80) 55/100/21 Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) UIORM 890 Vpeak Upr 1 068 Vpeak Upr 1 424 Vpeak UTR 6 000 Vpeak Upr = 1.2 x UIORM, Pd < 5 pC Test voltage (partial discharge test, procedure b for all devices test) Upr = 1.6 x UIORM, Pd < 5 pC Highest permissible overvoltage Degree of pollution (DIN VDE 0109) 2 Clearance distance > 7.0 mm Creepage distance > 7.0 mm Comparative tracking index (DIN IEC 112/VDE 0303 part 1) CTI Material group (DIN VDE 0109) 175 III a Storage temperature range Tstg -55 to +150 C Operating temperature range TA -55 to +100 C Isolation resistance, minimum value VIO = 500 V dc at TA = 25 C Ris MIN. 10 12 VIO = 500 V dc at TA MAX. at least 100 C Ris MIN. 10 11 Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Tsi 175 C Current (input current IF, Psi = 0) Isi 400 mA Power (output or total power dissipation) Psi 700 mW Ris MIN. 10 Isolation resistance VIO = 500 V dc at TA = 175 C (Tsi) 16 Data Sheet PN10232EJ01V0DS 9 PS2532-1,-2,-4,PS2532L-1,-2,-4 APPLICATION FOR TELEPHONE (EXAMPLE) LINE Bell Ringing Signal (75 Vr.m.s., 16 Hz) PS2505/PS2506 PS2705/PS2707 PS2805 etc. PS2521 PS2525 VCC Bell Ringing Detect Line Observe VCC Dial Pulse PS2532/PS2533 Generator PS2732/PS2733 PS2832/PS2833 Dialer Circuit CPU OCMOS FET PS7xxx Speech Circuit IN OUT Data Sheet PN10232EJ01V0DS 17 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.