ACCESSORIES
www.keithley.com
1.888.KEITHLEY (U.S. only)
A Greater Measure of Confidence
Model Description Type
TERMINATIONS LENGTH
USE WITH:From To mft
236-ILC-3 Safety Interlock Shielded twisted pair 3-pin round 3-pin round 310 4200-SCS, 8007, 8008
237-ALG-2 Low Noise Input Triax 3-slot male triax Alligator clips (3) 26.6Series 2200, Series 2600B, 4200-PA, 6220,
6221, 6482, 6487, 6514, 6517A, 6517B
237-ALG-15 Low Noise Input Triax 3-slot male triax Alligator clips (3) 15 50 Series 2200, Series 2600B, 4200-PA, 6220,
6221, 6482, 6487, 6514, 6517A, 6517B
248-MHV High Voltage Coax SHV female MHV male 310 248
248-SHV High Voltage Coax SHV female SHV female 310 248, CS-970
2000-MTC-2 Cable Assembly Shielded twisted pair DB44 female Unterminated 26.6 2000-20
2000-MTCD-2 Cable Assembly Shielded multiple
conductors DB44 female DB50 male 26.6 2000-SCAN-20
2600-ALG-2 Low Noise Input Triax 3-slot male triax Alligator clips (3) 26.6 2635B, 2636B, 4200-PA
2651A-KIT-1 Cable Assembly Coax 2-pin plug 2-pin plug 13.3 2651A, 8011
2651A-KIT-2 Cable Assembly Coax 2-pin plug 2-pin plug 26.6 2651A, 8011
2651A-KIT-3 Cable Assembly Coax 2-pin plug 2-pin plug 310 2651A, 8011
2107-4 Input Cable Shielded twisted pair LEMO Copper spade lugs (4) 1.2 42182A
2107-30 Input Cable Shielded twisted pair LEMO Copper spade lugs (4) 9.1 30 2182A, Series 2200
2107-50 Input Cable Shielded twisted pair LEMO Copper spade lugs (4) 15 50 2182A, Series 2200
3720-MTC-1.5 Mass Terminated Assembly Twisted pair D-sub female 78-pin D-sub male 1.5 53720, 3723, 3724
3720-MTC-3 Mass Terminated Assembly Twisted pair D-sub female 78-pin D-sub male 310 3720, 3723, 3724
3721-MTC-1.5 Mass Terminated Assembly Twisted pair D-sub female 50-pin D-sub male 1.5 53721, 3730, 3731, 3740, 3750
3721-MTC-3 Mass Terminated Assembly Twisted pair D-sub female 50-pin D-sub male 310 3721, 3730, 3731, 3740, 3750
3722-MTC-1.5 Mass Terminated Assembly Twisted pair D-sub male 104-pin D-sub female 1.5 53722
3722-MTC-1.5/MM Mass Terminated Assembly Twisted pair D-sub male 104-pin D-sub male 1.5 53722
3722-MTC-3 Mass Terminated Assembly Twisted pair D-sub male 104-pin D-sub female 310 3722
3722-MTC-3/MM Mass Terminated Assembly Twisted pair D-sub male 104-pin D-sub male 310 3722
3732-MTC-1.5 Mass Terminated Assembly Twisted pair D-sub female 78-pin D-sub male 1.5 53732
3732-MTC-3 Mass Terminated Assembly Twisted pair D-sub female 78-pin D-sub male 310 3732
4200-MTR X-1 Ultra Low Noise SMU triax Miniature male 3-slot male 13.2 4200-SCS
4200-MTRX-2 Ultra Low Noise SMU triax Miniature male 3-slot male 26.5 4200-SCS
4200-MTRX-3 Ultra Low Noise SMU triax Miniature male 3-slot male 39.8 4200-SCS
4200-PRB-C Cable Assembly Y adapter cable Female SMA 2 female SSMC 4200-PIV, 4210-CVU
4200-RPC-0.3 Cable Assembly Remote PreAmp DB15 DB15 0.3 14200-PA
4200-RPC-2 Cable Assembly Remote PreAmp DB15 DB15 26.5 4200-PA
4200-RPC-3 Cable Assembly Remote PreAmp DB15 DB15 39.8 4200-PA
4200-RPC-6 Cable Assembly Remote PreAmp DB15 DB15 619.6 4200-PA
4200-TRX-0.3 Ultra Low Noise PreAmp triax 3-slot male 3-slot male 0.3 1ft 4200-PA
4200-TRX-1 Ultra Low Noise PreAmp triax 3-slot male 3-slot male 13.2 4200-PA
4200-TRX-2 Ultra Low Noise PreAmp triax 3-slot male 3-slot male 26.5 4200-PA
4200-TRX-3 Ultra Low Noise PreAmp triax 3-slot male 3-slot male 39.8 4200-PA
4801 Low Noise Input Coax Male BNC Male BNC 1.2 46482, 6485, 7158
4802-10 Low Noise Input Coax Male BNC Unterminated 310 6482, 6485, 7158
4803 Low Noise Cable Kit Coax Male BNC (10) Female BNC (5) 15.2 50 6482, 6485, 7158
6011 Input Leads Triax 2-slot male triax Alligator clips (3) 1.55Instruments with 2-slot triax connectors
6011-10 Input Leads Triax 2-slot male triax Alligator clips (3) 310 Instruments with 2-slot triax connectors
6517-ILC-3 4-pin Interlock Cable Shielded 4-pin female DIN 4-pin female DIN 13.36517A, 8009
6517B-ILC-3 Interlock Cable Shielded 4-pin Phoenix 4-pin DIN 13.3 6517B, 8009
7009-5 Shielded RS-232 Shielded Male DB-9 Female DB-9 1.55All RS-232 capable instruments
7011-MTC-1 Mass Terminated Assembly Twisted pair (45) 96-pin female 96-pin female 13.3 7011-C, 7012-C, 7013-C, 7015-C, 7018-C
7011-MTC-2 Mass Terminated Assembly Twisted pair (45) 96-pin female 96-pin female 26.67011-C, 7012-C, 7013-C, 7015-C, 7018-C
7019C-MTCI-2 Kelvin Instrument Cable Shielded twisted pair Card connector Shielded banana plug
cables (6) 2 6.6Series 2400
7020-MTC-2 Mass Terminated Assembly Twisted pair (45) 96-pin female 96-pin female 26.6 7020
7024-3 Low Noise Triax 2-slot male triax 2-slot male triax 0.9 3Instruments with 2-slot triax connectors
7024-10 Low Noise Triax 2-slot male triax 2-slot male triax 310 Instruments with 2-slot triax connectors
7025-10 Low Noise Input Triax 2-slot male triax Unterminated 310 Instruments with 2-slot triax connectors
7035-MTC-2 Mass Terminated Assembly Twisted pair (45) 96-pin female 96-pin female 26.6 7035
7036-MTC-2 Mass Terminated Assembly Twisted pair (45) 96-pin female 96-pin female 26.67036
7051-* BNC Interconnect Coax BNC BNC 2015, 2016, 3390
Cables
Cables
Cables
ACCESSORIES
A Greater Measure of Confidence
www.keithley.com
1.888.KEITHLEY (U.S. only)
Cables
Model Description Type
TERMINATIONS LENGTH
USE WITH:From To mft
7078-DIN 707A Master/Slave Twisted pair (9) 8-pin DIN 8-pin DIN 1.8 6707A
7078-MTC-5 Mass Terminated Assembly Twisted pair (12) 38-pin connector 38-pin connector 1.5 57071, 7071-4, 7074-D
7078-MTC-20 Mass Terminated Assembly Twisted pair (12) 38-pin connector 38-pin connector 6.120 7071, 7071-4, 7074-D
7078-TRX-1 Low Noise Triax 3-slot male triax 3-slot male triax 0.3 12635B, 2636B, 6482, 6487, 6514, 6517A, 6517B, 7072, 7174A
7078-TRX-3 Low Noise Triax 3-slot male triax 3-slot male triax 0.9 32635B, 2636B, 6482, 6487, 6514, 6517A, 6517B, 7072, 7174A
7078-TRX-5 Low Noise Triax 3-slot male triax 3-slot male triax 1.5 52635B, 2636B, 6482, 6487, 6514, 6517A, 6517B, 7072, 7174A
7078-TRX-10 Low Noise Triax 3-slot male triax 3-slot male triax 310 2635B, 2636B, 6482, 6487, 6514, 6517A, 6517B, 7072, 7174A
7078-TRX-12 Low Noise Triax 3-slot male triax 3-slot male triax 412 2635B, 2636B, 6482, 6487, 6514, 6517A, 6517B, 7072, 7174A
7078-TRX-20 Low Noise Triax 3-slot male triax 3-slot male triax 6.1 20 2635B, 2636B, 6482, 6487, 6514, 6517A, 6517B, 7072, 7174A
7078-TRX-6IN Low Noise Triax 3-slot male triax 3-slot triax 0.15 0.5 6430
7152-MTC-2 Low Noise Matrix Expansion Triax (5) 6-pin M-series coax 6-pin M-series coax 0.6 27152
7152-MTC-10 Low Noise Matrix Expansion Triax (5) 6-pin M-series coax 6-pin M-series coax 310 7152
7152-TRX-10 Low Noise M-Series to Triax Triax (5) M-series connector 3-slot triax (5) 310 7152, 8006
7153-TR X Low Noise M-Series to Triax Triax (5) M-series connector 3-slot triax (5) 2 6 7153
7173-50-CSEP 4-cable Set Coax SMB female BNC male 0.6 27173-50
7705-MTC-2 Mass Terminated Assembly Twisted pair (25) D-sub male D-sub female 26.67703, 7705, 7707, 7709
7711-BNC-SMA 5 SMA to BNC Cables Coax SMA Male BNC Female 0.15 0.5 7711
7712-SMA-1 SMA Cables Coax SMA Male SMA Male 1 3.37711, 7712, System 46, System 46T
7754-3 BNC Coax BNC Male Alligator clips 0.9 3Instruments with 2-slot BNC connectors
8007-GND-3 Safety Ground Wire Single wire Crimp lug Crimp lug 310 8007
8542-301 LIV Cable Multiple conductor DB9 female
Multiple terminations:
Triax (2500), 2 dual
bananas (24XX) GND wire
1.862500, Series 2400, System 25, 8544, 8544-TEC
8607 1kV Test Cables Single wire (2) Safety banana Safety banana 13.32410, 6487, 6517A, 6517B
CA-18-1 Shielded Coax Dual banana plug Dual banana plug 1.24Bind ing post inputs
CA-19-2 RG58 RG58 BNC male BNC male 1.5 54200-SCS
CA-126-1A Digital I/O Shielded DB25 male DB25 female 1.5 5Series 2600B, Series 3700A
CA-180-3A Crossover Cable Twisted pair RJ45 RJ45 310 Series 2600B, 2701, 3390, Series 3700A,
6221, all TSP-enabled instruments
CA-321-1 Temperature Control Cable Multiple conductor DB15 female 8-position Phoenix
(CS-846 equivalent) 1.862510, 8544
CA-322-1 Dual Temperature Control
Cable Multiple conductor DB15 female Y cable to two 8-position
Phoenix (CS-846) 1.8 62510, 8544, 8544-TEC
CA-404B RG188 Coax SMA male SMA male 26.5 4200-SCS
CA-405B RG188 Coax SMA male SMA male 0.15 0.5 4200-SCS
CA-406B RG188 Coax SMA male SMA male 0.33 1.08 4200-SCS
CA-446A Cable Assembly Coax SMA male SMA male 39.8 4210-CVU
CA-447A Cable Assembly Coax SMA male SMA male 1.5 54210-CVU
CA-451A RG188 Coax SMA male SMA male 0.108 0.35 4200-SCS
CA-452A RG188 Coax SMA male SMA male 0.203 8 in. 4200-SCS
CA-557-1A Cable Assembly Multiple conductor 8-pin receptacle 8-pin receptacle 13.3 2651A, 8011
CA-557-2A Cable Assembly Multiple conductor 8-pin receptacle 8-pin receptacle 26.6 2651A, 8011
CA-557-3 Cable Assembly Multiple conductor 8-pin receptacle 8-pin receptacle 310 2651A, 8011
CA-558-xInterlock Cable Twisted pair (2) 25-pin D-sub 3-pin 1, 2, 3 3.3, 6.6,
10 Series 2600B, 2657A
CA-559-0A Black Banana Jumper Jumper Banana Banana 0.102 4 in. 8010
CA-559-2A Red Banana Jumper Jumper Banana Banana 0.102 4 in. 8010
CA-560-0A Banana Plug Jumper Cable Jumper Banana Banana 0.203 8 in. 8010
CA-560-2A Banana Plug Jumper Cable Jumper Banana Banana 0.203 8 in. 8010
CA-561-0A Black Banana Jumper Jumper Banana Banana 0.203 8 in. 8010
CA-561-2A Red Banana Jumper Jumper Banana Banana 0.203 8 in. 8010
CA-562-0B Black Safety Banana Plug
Jumper Cable Jumper Banana Banana 0.254 10 in. 8010
CA-562-2B Red Safety Banana Plug
Jumper Cable Jumper Banana Banana 0.254 10 in. 8010
CA-563C BNC to Banana Jumper Jumper Bnc Banana 0.241 9.5 in. 8010
CA-567-0A Black Banana Jumper Jumper Banana Banana 0.203 8 in. 8010
CA-567-2A Red Banana Jumper Jumper Banana Banana 0.203 8 in. 8010
CA-568-XA Protective Earth Ground Safety Eye lug Eye lug 0.3, 0.45, 3 1, 1.5, 10 8010
Cables
Cables
ACCESSORIES
www.keithley.com
1.888.KEITHLEY (U.S. only)
A Greater Measure of Confidence
Model 236-ILC-3 Safety Interlock Cable:
Designed to connect the lid interlock circuit of
the Models 8007 and 8008 test fixtures to the
interlock circuit of the Model 237 SMU and 486
and 487 Picoammeters.
For use with: 4200-SCS, 8007, 8008
Model 237-ALG-*: Low noise triax cable (SC-22)
terminated with a 3-slot male triax connector on
one end and 3 alligator clips on the other.
237-ALG-2 2m (6.6 ft) length
237-ALG-15 15m (50 ft) length
For use with: Series 2200, Series 2600B,
4200-PA, 6220, 6221, 6487, 6514, 6482,
6517A , 6517B
Model 248-MHV: 3m (10 ft) of RG-8A/U coax
cable terminated with a SHV female connec-
tor on one end and a MHV male connector on
the other. Maximum operating voltage (rms)
is 5,000V.
For use with: 248
Model 248-SHV: 3m (10 ft) of RG-8A/U coax
cable terminated with a SHV female connector
on both ends. Maximum operating voltage (rms)
is 5,000V.
For use with: 248 and CS-970
Model 2000-MTC-2 Cable Assembly: 2-meter
cable with a 44-pin connector on one end that is
designed to mate with the 2000-20 scanner card.
The other end is unterminated for direct connec-
tion to measurement fixtures or devices.
For use with: 2000-20
Model 2000-MTCD-2 Cable Assembly: 2-meter
cable with a 44-pin connector on one end that
is designed to mate with the 2000-SCAN-20
scanner card. The other end is equipped with a
50-pin D-sub male connector.
For use with: 2000-SCAN-20
Cables
Model Description Type
TERMINATIONS LENGTH
USE WITH:From To mft
HV-CA-554-x 3kV Rated High voltage Triax Triax 0.5, 1,
2, 3
1.6, 3.2,
6.6, 10 8010, 2657A
HV-CA-571-3 High Voltage Triax Triax Unterminated 2657A
S46-SMA-0.5 SMA Cable Coax SMA Male SMA Male 0.15 0.5 7711, 7712, System 46, System 46T
S46-SMA-1 SMA Cable Coax SMA Male SMA Male 0.30 1.0 7711, 7712, System 46, System 46T
SC-9 Low Noise Coax Unterminated Unterminated Sold by the foot
SC-22 Low Noise Triax Unterminated Unterminated Sold by the foot CS-631
SC-93 Low Thermal Shielded Unterminated Unterminated Sold by the foot 2182-KIT
SC-182 Low Inductance Coax Unterminated Unterminated Sold by the foot 2302, 2303, 2303-PJ, 2304A, 2306, 2306-PJ
SC-200A General Purpose Shielded twisted pair Unterminated Unterminated Sold by the inch Series 2600B
SC-206 High Current Coax Cable Coax Unterminated Unterminated Sold by the inch 2651A
SHV-CA-553-x 3kV Rated High voltage Triax SHV 1, 2,
3
3.2, 6.6,
10 2657A
Cables
Cables
ACCESSORIES
A Greater Measure of Confidence
www.keithley.com
1.888.KEITHLEY (U.S. only)
Model 2107-* Low-Thermal Input Cables with
Spade Lugs: An input cable terminated with a
LEMO connector on one end and four copper
spade lugs on the other.
2107-4 1.2m (4 ft) length
2107-30 9.1m (30 ft) length
2107-50 15m (50 ft) length
For use with: 2182A, Series 2200
Model 2600-ALG-2: 2m (6.6 ft) cable terminated
with a 3-slot male triax connector on one end
and 3 alligator clips on the other.
For use with: 2635B, 2636B, 4200-PA
Model 2651A-KIT-*: High current, low impe-
dance, coaxial cable assembly.
2651A-KIT-1: 1m (3.3 ft).
2651A-KIT-2: 2m (6.6 ft).
2651A-KIT-3: 3m (10 ft).
For use with: 2651A, 8011
Model 3720-MTC-*: 78-pin D-sub female to
78-pin D-sub male cable.
3720-MTC-1.5: 1.5m (5 ft) length
3720-MTC-3: 3m (10 ft) length
For use with: 3720, 3723, 3724
Model 3721-MTC-*: 50-pin D-sub female to
50-pin D-sub male cable.
3721-MTC-1.5: 1.5m (5 ft) length
3721-MTC-3: 3m (10 ft) length
For use with: 3721, 3730, 3731, 3740, 3750
Model 3722-MTC-*: 104-pin D-sub male to
104-pin D-sub female cable.
3722-MTC-1.5: 1.5m (5 ft) length
3722-MTC-3: 3m (10 ft) length
For use with: 3722
Model 3722-MTC-*/MM: 104-pin D-sub male to
104-pin D-sub male cable.
3722-MTC-1.5/MM: 1.5m (5 ft) length
3722-MTC-3/MM: 3m (10 ft) length
For use with: 3722
Model 3732-MTC-*: 78-pin D-sub female to
78-pin D-sub male cable.
3732-MTC-1.5: 1.5m (5 ft) length
3732-MTC-3: 3m (10 ft) length
For use with: 3732
Cables
Cables
Cables
ACCESSORIES
www.keithley.com
1.888.KEITHLEY (U.S. only)
A Greater Measure of Confidence
Model 4200-MTRX-*: Ultra low noise SMU triax
cable is terminated with a miniature male triax
connector on one end and a standard 3-slot
male triax connector on the other end. This
cable connects a Model 4200-SMU or 4210-SMU
source measurement unit installed in a Model
4200-SCS to a test fixture. (4200-MTRX-* cables
are intended only for connection to an SMU that
does not have a 4200-PA PreAmp installed.)
4200-MTRX-1: 1m (3.2 ft)
4200-MTRX-2: 2m (6.5 ft) (two included with
each 4200-SCS SMU not configured with a
4200-PA Remote PreAmp)
4200-MTRX-3: 3m (9.8 ft)
For use with: 4200-SCS
Model 4200-PRB-C: SMA to SSMC Y adapter
cable with local ground that connects the
4200-PIV package to DC probe manipulators.
The cable is terminated at one end with a single
female SMA. The other end splits into two
gold SSMC plugs (female connectors) and a
black wire with integrated connector, which is
used to connect to the shield of another Model
4200-PRB-C cable.
For use with: 4200-PIV, 4210-CVU
Model 4200-RPC-*: Remote PreAmp cable
terminated at each end with a high density
DB15 connector. This cable connects a Model
4200-SMU or 4210-SMU source measurement
unit installed in a Model 4200-SCS to a remotely
mounted Model 4200-PA PreAmp.
4200-RPC-0.3: 0.3m (1 ft) (for use inside prober
shield)
4200-RPC-2: 2m (6.5 ft) (one included with each
4200-PA)
4200-RPC-3: 3m (9.8 ft)
4200-RPC-6: 6m (19.6 ft)
For use with: 4200-PA
Model 4200-TRX-*: Ultra low noise PreAmp
triax cable terminated with a standard 3-slot
male triax connector on each end. This cable
connects a Model 4200-PA PreAmp option
installed in the Model 4200-SCS to the
test fixture.
4200-TRX-0.3: 0.3m (1 ft) (recommended for
remote location of the 4200-PA)
4200-TRX-1: 1m (3.2 ft)
4200-TRX-2: 2m (6.5 ft) (two included with each
Model 4200-PA)
4200-TRX-3: 3m (9.8 ft)
For use with: 4200-PA
Model 4801 Input Cable: Low noise coax cable,
1.2m (48 in) in length, with male BNC con nec-
tors on each end.
For use with: 6482, 6485, 7158
Model 4802-10: 3m (10 ft) of low noise coax
cable with male BNC connector at one end and
unterminated at the other.
For use with: 6482, 6485, 7158
Model 4803 Low Noise Cable Kit: In cludes
15m (50 ft) of low noise coax cable, 10 male BNC
con nec tors, and 5 female BNC chassis-mount
connectors.
For use with: 6482, 6485, 7158
Cables
Cables
Cables
ACCESSORIES
A Greater Measure of Confidence
www.keithley.com
1.888.KEITHLEY (U.S. only)
2 Slot Triax
Model 6011 2-slot Triax Cable: 1.5m (5 ft) of
tri ax cable (SC-22) ter mi nat ed with a 2-slot triax
plug on one end and three alligator clips on the
other. Also available in 3m (10 ft) length (Model
6011-10).
For use with instruments with 2-slot triax
connectors
Model 6517-ILC-3 Interlock Cable: De sign ed to
connect the Interlock of the 6517A with the 8009
test fixture. Configuring the 6517A with the 8009
test fixture results in all the elec trode constants
already being programmed into the unit.
For use with: 6517A Electrometer, 8009
Model 6517B-ILC-3 Interlock Cable: De sign ed
to connect the interlock of the 6517B with the
8009 test fixture. Configuring the 6517B with the
8009 test fixture results in all the elec trode con-
stants already being programmed into the unit.
For use with: 6517B Electrometer, 8009
Model 7009-5 Shielded RS-232 Cable: 1.5m
(5 ft) RS-232 cable with a male DB-9 connector
at one end and a female DB-9 connector on the
other end. Wired as a straight through, not as a
null modem cable.
For use with: All RS-232 capable instruments
Model 7011-MTC-x: Mass terminated cable
assembly for connection to 7011-C and other
switching cards. The cable has 45 pairs with
outer shield. The cable is terminated at each
end with 96-pin female DIN connectors with
strain relief.
7011-MTC-1 1m (3.3 ft)
7011-MTC-2 2m (6.6 ft)
For use with: 7011-C, 7012-C, 7013-C, 7015-C,
7018-C, 7022
7022
Model 7019C-MTCI-2 6-wire Kelvin Ex tend er
and Instru ment Cable: Used with Model
7019-C 6-Wire Ohms Matrix Card and a
SourceMeter SMU instrument. The Source Meter
cables are 0.6m (2 ft) long and the DUT cables
are 2m (6.6 ft) long. The cable set is used in a
basic system to test a resistor network.
For use with: Series 2400 SourceMeter SMU
Instruments
Model 7020-MTC-2: 2m (6.6 ft) mass terminated
cable assembly for connection to 7020. The
cable has 45 pairs with outer shield. The cable is
terminated at each end with 96-pin female DIN
connectors with strain relief.
For use with: 7020
Cables
Cables
Cables
ACCESSORIES
www.keithley.com
1.888.KEITHLEY (U.S. only)
A Greater Measure of Confidence
2 Slot Triax
Model 7024-* 2-slot Triax Cable: Low noise
triax cable (SC-22) with 2-slot male triax connec-
tors on each end.
7024-3 0.9m (3 ft)
7024-10 3m (10 ft)
For use with instruments with 2-slot triax
connectors
2 Slot Triax
Model 7025-10 2-slot Triax Cable: 3m (10 ft)
low noise triax input cable (SC-22) terminated
on one end with 2-slot male triax connector.
For use with instruments with 2-slot triax
connectors
Model 7035-MTC-2: 2m (6.6 ft) mass terminated
cable assembly for connection to 7035. The
cable has 45 pairs with outer shield. The cable is
terminated at each end with 96-pin female DIN
connectors with strain relief.
For use with: 7035
Model 7036-MTC-2: 2m (6.6 ft) mass terminated
cable assembly for connection to 7036. The
cable has 45 pairs with outer shield. The cable is
terminated at each end with 96-pin female DIN
connectors with strain relief.
For use with: 7036
Model 7051-*: General purpose BNC to BNC
cable (G-58C).
7051-2 0.6m (2 ft)
7051-5 1.5m (5 ft)
7051-10 3m (10 ft)
For use with: 2015, 2016, 3390, 7711, some
instrument external trigger I/O lines
Model 7078-DIN: This 1.8m (6 ft) cable ac ces-
sory connects between Model 707A main frames
when operated as one unit in Master/Slave
mode. One cable is required for each mainframe.
For use with: 707A
Model 7078-MTC-5: 1.5m (5 ft) mass terminated
cable for connection to column inputs (7071 and
7071-4). Also used for matrix expansion (7071,
7071-4, or 7074). The cable has 12 sets of shielded
twisted pair wires for isolation of critical circuits
and noise rejection in the system. The cable is ter-
minated at each end in a 38-pin connector block
with strain relief. Model 7078-MTC-20 can be
used as is or cut in half to make two 10 ft cables.
For use with: 7071, 7071-4, 7074-D
3 Slot Triax
Model 7078-TRX-* 3-slot Triax Cables: Low
noise triax cables terminated at both ends in
3-slot male triax connectors.
7078-TRX-1 0.3m (1 ft)
7078-TRX-3 0.9m (3 ft)
7078-TRX-5 1.5m (5 ft)
7078-TRX-10 3.0m (10 ft)
7078-TRX-12 3.5m (12 ft)
7078-TRX-20 6.0m (20 ft)
For use with: 2635B, 2636B, 6220, 6221, 6482,
6487, 6514, 6517A, 6517B, 7072, 7174A
Cables
Cables
Cables
ACCESSORIES
A Greater Measure of Confidence
www.keithley.com
1.888.KEITHLEY (U.S. only)
Cables
3 Slot Triax
Model 7078-TRX-6IN 3-slot Triax Cable: 0.15m
(6 inch), 3-slot, low-noise, guarded triax cable that
minimizes leakage current and input capacitance
when used with the Model 6430 Remote PreAmp
(lower noise than 1 foot or longer versions).
For use with: 6430
Model 7152-MTC-*: Five low noise triax cables
terminated in 6-position M-series coax connec-
tor blocks. Provides quick connection between
7152 matrix cards and is compatible with Model
7152-MTR connector. Also available in 3m (10 ft)
length for connection between the matrix and
the device under test.
7152-MTC-2 0.6m (2 ft)
7152-MTC-10 3.0m (10 ft)
For use with: 7152
Model 7152-TR X-10: Set of five 3m (10 ft) low
noise triax cables terminated at one end in a
single M-series connector block and at the other
end in 3-slot triax connectors. This cable is most
useful for direct connection to electrometers
and Source/Measure Units.
For use with: 7152, 8006
Model 7153-TR X: 2m (6.6 ft) low noise cable
assembly with M-series connector at one end for
row or column connections to the 7153, and five
3-slot male triax connectors at the other end.
Two 7153-TRX cable assemblies are required to
make all connections to the 7153 card.
For use with: 7153
Model 7173-50-CSEP: The 7173-50-CSEP cable
set provides the capability to expand a switching
configuration to include more than one 7173-50.
Each set contains four 0.6m (25 in) cables. One
cable is required to expand each row or column
connection between adjacent cards. For exam-
ple, using two 7173-50 cards to create a 4×24
matrix would require connecting the rows of
two adjacent cards together. One 7173-50-CSEP
set has enough cables to do this. Connecting the
12 columns together on two adjacent cards cre-
ates an 8×12 matrix. This would require three
7173-50-CSEP sets, 12 cables.
For use with: 7173-50
Model 7705-MTC-2: 2m (6.6 ft) 50-conductor
male to female D-sub cable assembly.
For use with: 7703, 7705, 7707, 7709, 7701
Cables
Cables
ACCESSORIES
www.keithley.com
1.888.KEITHLEY (U.S. only)
A Greater Measure of Confidence
Cables
Model 7707-MTC-2: 2m (6.6 ft) 25-conductor
male to female D-sub cable assembly.
For use with: 7701, 7707, 7709
Model 7711-BNC-SMA: Male SMA to female
BNC cables (5 each), 0.15m (0.5 ft) in length.
For use with: 7711
Model 7712-SMA-1: SMA cable, male to male,
1m (3.3 ft).
For use with: 7711, 7712, System 46,
System 46T
Model 7754-3 BNC to Alligator Cable: 0.9m
(3 ft) terminated on one end with a BNC plug
and on the other with two alligator clips.
For use with instruments with 2-slot BNC
connections
Model 8007-GND-3: Safety ground wire, 3m
(10 ft).
For use with instruments with a safety
ground connector
Model 8542-301: 1.8m (6 ft) LIV test system
cable.
For use with: Series 2400, 2500, System 25,
8544, 8544-TEC
Item shipped may
vary from model
pictured here.
Model 8607 1kV Source Banana Cable Set:
The 8607 cable set is made up of one red and
one black high voltage test lead with fixed safety
banana plug ends. The leads are 1 meter (3.3 ft)
long and have a voltage rating of 1500V DC.
For use with: 2410, 6487, 6517A, 6517B
Item shipped may vary from
model pictured here.
CA-18-1: 1.2m (4 ft) shielded cable te r m i nat ed
with a dual banana plug on each end. For use
with binding post inputs or dual banana jacks.
For use with: Binding post inputs
Model CA-19-2: 1.5m (5 ft) RG58 cable termi-
nated with a BNC male plug on each end.
For use with: 4200-SCS
Cables
Cables
ACCESSORIES
A Greater Measure of Confidence
www.keithley.com
1.888.KEITHLEY (U.S. only)
Cables
CA-126-1A Digital I/O Cable: 1.5m (5 ft) of
cable, from DB25 male to DB25 female.
For use with: Series 2600B, Series 3700A
CA-180-3A: 3m (10 ft), CAT5 crossover cable for
Ethernet or TSP-Link.
For use with: Series 2600B, 2701, 3390,
Series 3700A, 6221, all TSP-Link enabled
instruments
CA-321-1: Temperature control cable.
For use with: 2510, 8544
CA-322-1: Dual temperature control cable.
For use with: 2510, 8544, 8544-TEC
CA-404B: 2m (6.5 ft) RG188 coax cable termi-
nated with an SMA male plug on each end, 50W
impedance.
For use with: 4200-SCS, System 46,
System 46T
CA-405B: 15cm (6 in) RG188 coax cable termi-
nated with an SMA male plug on each end, 50W
impedance.
For use with: 4200-SCS
CA-406B: 33cm (13 in) RG188 coax cable termi-
nated with an SMA male plug on each end, 50W
impedance.
For use with: 4200-SCS
CA-446A: 3m (9.8 ft) coax cable terminated
with an SMA male plug on each end, 100W
impedance.
For use with: 4210-CVU
CA-447A: 1.5m (4.9 ft) coax cable terminated
with an SMA male plug on each end, 100W
impedance.
For use with: 4210-CVU
CA-451A: 10.8cm (4.25 in) RG188 coax cable
terminated with an SMA male plug on each, 50W
impedance.
For use with: 4200-SCS
Cables
Cables
ACCESSORIES
www.keithley.com
1.888.KEITHLEY (U.S. only)
A Greater Measure of Confidence
Cables
CA-452A: 20.4cm (8 in) RG188 coax cable termi-
nated with an SMA male plug on each end, 50W
impedance.
For use with: 4200-SCS
CA-557-*: 8-pin male to 8-pin male cable assem-
bly with straight through pin configuration.
CA-557-1: 1m (3.3 ft)
CA-557-2: 2m (6.6 ft)
CA-557-3: 3m (10 ft)
For use with: 2601B, 2602B, 2611B, 2612B,
2651A SourceMeter® SMU Instruments, 2600-
PCT-x, 4200-PCT-x, 8010
CA-558-2: 25-pin D-sub to 3-pin interlock cable
assembly.
For use with: Series 2600B, 2600-PCT-x,
2651A, 2657A, 4200-SCS, 4200-PCT-x, 8010
CA-559-0A and CA-559-2A: Banana to banana
jumper (102mm).
For use with: 2600-PCT-x, 4200-PCT-x, 8010
CA-560-0A and CA-560-2A: Banana to banana
jumper (203mm).
For use with: 2600-PCT-x, 4200-PCT-x, 8010
CA-561-0A and CA-561-2A: Banana to banana
jumper (305mm).
For use with: 2600-PCT-x, 4200-PCT-x, 8010
CA-562-0B and CA-562-2B: Safety banana to
banana jumper (254mm).
For use with: 2600-PCT-x, 4200-PCT-x, 8010
CA-563C: BNC to banana jumper (240mm).
For use with: 2600-PCT-x, 4200-PCT-x, 8010
CA-568-xA: Protective earth safety ground cable
with eye lugs (x = 12, 18, or 120 inches).
For use with: 2657A, 2657-LIM-3,
2657-PIM-200, 8010
HV-CA-554-x: High voltage triax to triax cable
(3kV rated) (x = 0.5, 1, 2, or 3m).
For use with: 2657A, 2657-LIM-3,
2657-PIM-200, 8010
HV-CA-571-3: High voltage triax to untermi-
nated cable.
For use with: 2657A, 2600-PCT-x, 4200-PCT-x
Cables
Cables
ACCESSORIES
A Greater Measure of Confidence
www.keithley.com
1.888.KEITHLEY (U.S. only)
Cables
SHV-CA-533-x: High voltage triax to SHV cable
(x = 1, 2, or 3m) (3kV rated).
For use with: 2657A
S46-SMA-0.5: SMA cable, male to male, 0.15m
(0.5 ft).
For use with: 7711, 7712, System 46,
System 46T
S46-SMA-1: SMA cable, male to male, 0.3m (1 ft).
For use with: 7711, 7712, System 46,
System 46T
SC-9: Low noise coax cable without con nec tors
(sold by the foot).
SC-22: Low noise triax cable without con nec tors
(sold by the foot).
For use with: CS-631
SC-93: Low thermal, 2-conductor shielded cable,
#22AWG solid copper (sold by the foot).
For use with: 2182-KIT
SC-182: Low inductance (42nH/ft) coaxial cable
for minimizing test lead impedance in circuits
using fast transient response power supplies.
The cable is sold by the foot and comes without
connectors.
For use with: 2302, 2303, 2303-PJ, 2304A,
2306, 2306-PJ, 2306-VS
SC-200A: Shielded twisted pair cable (sold by
the inch). Recommended for general-purpose
use with Series 2600B System SourceMeter SMU
instruments.
For use with: Series 2600B
Cables
Cables
