GRF103-5 - Teledyne Technologies - Datasheet.Directory

SURFACE MOUNT,

HIGH REPEATABILITY,

BROADBAND

CENTIGRID®RELAYS

DPDT

www.teledynerelays.com GRF100 GRF103/1203/Q1

RF & MICROWAVE

SERIES

GRF100

GRF103

DESCRIPTION

The ultraminiature GRF100 and GRF103 relays are designed to provide a

practical surface-mount solution with improved RF signal repeatability over the

frequency range. GRF100 and GRF103 relays feature a unique ground shield

that isolates and shields each lead to ensure excellent contact-to-contact and

pole-to-pole isolation. This ground shield provides a ground interface that

results in improved high-frequency performance as well as parametric

repeatability. The GRF100 and GRF103 extend performance advantages over

similar RF devices that simply offer formed leads for surface mounting.

These relays are engineered for use in RF attenuator, RF switch matrices, ATE

and other applications that require dependable high frequency signal fidelity

and performance.

The GRF100 and GRF103 feature:

• High repeatability

• Broader bandwidth

• Metal enclosure for EMI shielding

• High isolation between control and signal paths

• High resistance to ESD

The following unique construction features and manufacturing techniques

provide excellent robustness to environmental extremes and overall high

reliability:

• Uniframe motor design provides high magnetic efficiency and mechanical

rigidity

• Minimum mass components and welded construction provide maximum

resistance to shock and vibration

• Advanced cleaning techniques provide maximum assurance of internal

cleanliness

• Gold-plated precious metal alloy contacts ensure reliable switching

• Hermetically sealed

INTERNAL CONSTRUCTION

SERIES

DESIGNATION RELAY TYPE

GRF100 Repeatable, RF Centigrid®relay

GRF103 Sensitive, repeatable, RF Centigrid®relay

ENVIRONMENTAL AND

PHYSICAL SPECIFICATIONS

Temperature

(Ambient)

Storage –65°C to +125°C

Operating –55°C to +85°C

Vibration

(General Note 1) 10 g’s to 500 Hz

Shock

(General Note 1)

30 g’s,

6 msec, half-sine

Enclosure Hermetically sealed

Weight

GRF100 0.09 oz. (2.55g) max.

GRF103 0.16 oz. (4.5g) max.

www.teledynerelays.com GRF100 GRF103/1203/Q1

RF & MICROWAVE

SERIES GRF100 AND GRF103

TYPICAL RF CHARACTERISTICS (See RF Notes)

Isolation Across Contacts (RF Note 4)

-60

-50

-40

-30

-20

0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000

Frequency (MHz)

Isolation (dB)

Isolation Pole to Pole (RF Note 5)

-70

-60

-50

-40

-30

-20

0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000

Frequency (MHz)

Isolation (dB)

Insertion Loss (RF Note 6)

-1.8

-1.6

-1.4

-1.2

-1

-0.8

-0.6

-0.4

-0.2

0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000

Frequency (MHz)

Insertion Loss (dB)

VSWR (RF Note 6)

1.00

1.40

1.80

2.20

2.60

3.00

0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000

Frequency (MHz)

VSWR

GRF100 Time Response (RF Note 6)

-0.1

0.1

0.3

0.5

0.7

0.9

1.1

-100 0 100 200 300 400 500 600 700 800 900

Time (ps)

Volt

10%

90%

37ps reference

54.7ps pulse rise time

82.8ps propagation delay time

RF NOTES

1. Test conditions: a. Fixture: .031" copper clad, reinforced PTFE, RT/duroid®6002 with SMA connectors. (RT/duroid®is a

registered trademark of Rogers Corporation.)

b. RF ground shield is soldered to PCB RF ground plane.

c. Room ambient temperature.

d. Terminals not tested were terminated with 50-ohm load.

e. Contact signal level: –10 dBm.

f. No. of test samples: 4.

2. Data presented herein represents typical characteristics and is not intended for use as specification limits.

3. Data is per pole, except for pole-to-pole data.

4. Data is the average from readings taken on all open contacts.

5. Data is the average from readings taken on poles with coil energized and de-energized.

6. Data is the average from readings taken on all closed contacts.

7. Test fixture effect de-embedded from frequency and time response data.

www.teledynerelays.com GRF100 GRF103/1203/Q1

RF & MICROWAVE

RF INSERTION LOSS REPEATABILITY NOTES

1. Test conditions: a. Fixture: .031" copper clad, reinforced PTFE, RT/duroid®6002 with SMA connectors. (RT/duroid®is a

registered trademark of Rogers Corporation.)

b. Test performed at room ambient temperature.

c. Contact signal level: –10 dBm.

2. Data presented herein represents typical characteristics and is not intended for use as specification limits.

3. Insertion loss repeatability measured over frequency range from 50 MHz to 4 GHz.

SERIES GRF100 AND GRF103

TYPICAL RF INSERTION LOSS REPEATABILITY CHARACTERISTICS (See RF Insertion Loss Repeatability Notes)

REPEATABILITY CHARACTERISTICS GRF100 RELAYS

REPEATABILITY CHARACTERISTICS GRF103 RELAYS

20%

40%

60%

80%

100%

0 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2

Repeatability (dB)

Normally Open

% Total number of recorded test cycles

20%

40%

60%

80%

100%

0 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2

Repeatability (dB)

Normally Closed

% Total number of recorded test cycles

20%

40%

60%

80%

100%

0 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2

Repeatability (dB)

Normally Open

% Total number of recorded test cycles

20%

40%

60%

80%

100%

0 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2

Repeatability (dB)

Normally Closed

% Total number of recorded test cycles

www.teledynerelays.com GRF100 GRF103/1203/Q1

RF & MICROWAVE

SERIES GRF100 GRF103

GENERAL ELECTRICAL SPECIFICATIONS (@25°C)

DETAILED ELECTRICAL SPECIFICATIONS (@25°C)

Contact Arrangement DPDT

Rated Duty Continuous

Contact Resistance 0.100 ohm max.

Contact Load Rating Low Level: 10 to 50 μA/10 to 50mV

Contact Life Rating 10,000,000 cycles (typical) at low level

Coil Operating Power GRF100-5: 500 mW typical @ nominal rated voltage GRF100-12: 369 mW typical @ nominal rated voltage

GRF103-5: 250 mW typical @ nominal rated voltage GRF103-12: 180 mW typical @ nominal rated voltage

Operate Time GRF100 4.0 msec max.

GRF103 6.0 msec max.

Release Time GRF100 3.0 msec max.

GRF103 3.0 msec max.

Intercontact Capacitance 0.4 pf typical

Insulation Resistance 1,000 megohms min. between mutually isolated terminals

Dielectric Strength 350 Vrms/60Hz @ atmospheric pressure

BASE PART

NUMBERS

GRF100-5

GRF103-5

GRF100-12

GRF103-12

Coil Voltage, Nominal (Vdc) 5.0 12.0

Coil Resistance

(Ohms ±20%)

GRF100 50 390

GRF103 100 800

Pick-up Voltage (Vdc, Max.) 3.6 9.0

(2.54)

.100 TYP

.375 SQ

(9.531)

MAX

(0.79)

.031 REF

.335 SQ

(8.51)

MAX

.330 MAX

(8.38)

(GRF100)

.435 MAX

(11.05)

(GRF103)

(0.89)

.035 REF

(0.89)

SEE NOTE 3.

(2.54)

.100 TYP

SCHEMATIC-TERMINAL VIEW

PIN NUMBERS ARE

FOR REFERENCE ONLY,

NOT MARKED ON RELAY

NOTES:

1. DIMENSIONS ARE IN INCHES. METRIC EQUIVALENTS IN MILLIMETERS ARE SHOWN IN ( ).

2. UNLESS OTHERWISE SPECIFIED, TOLERANCES ON DIMENSIONS ARE .010 INCH (0.025 mm).

3. FOR OPTIMAL RF PERFORMANCE, SOLDER BOTTOM OF GROUND SHIELD TO PCB RF GROUND PLANE.

U.S. PATENT PENDING

(0.43) +0.05

-0.03

.017 +.002

-.001

DIA.

8 LEADS

.033 (0.84) REF

LENGTH

OUTLINE DIMENSIONS

GENERAL NOTES

1. Relays will exhibit no contact chatter in

excess of 10 μsec or transfer in excess

of 1 μsec.

2. Unless otherwise specified, parameters

are initial values.

3. Relays may be subjected to 260°C,

peak solder reflow temperature, 1

minute, 3 passes.

4. Butt-lead ends are coplanar within

.003" (0.08).

5. Application notes available for PCB

layout and mounting information.

Pad designation and

bottom view dimensions Height For use with the following: Dim. H

Max.

“M4” Pad for TO-5

ER411T

ER412, ER412D, ER412DD .295 (7.49)

712, 712D, 712TN,

RF300, RF310, RF320 .300 (7.62)

ER420, ER422D, ER420DD, 421,

ER421D, ER421DD, ER422, ER422D,

ER422DD, 722, 722D, RF341

.305 (7.75)

ER431T, ER432T,

ER432, ER432D, ER432DD .400 (10.16)

732, 732D, 732TN, RF303, RF313,

RF323 .410 (10.41)

RF312 .350 (8.89)

“M4” Pad for TO-5

ER411, ER411D, ER411DD .295 (7.49)

ER431, ER431D, ER431DD .400 (10.16)

RF311 .300 (7.62)

RF331 .410 (10.41)

“M4” Pad for Centigrid®

172, 172D .305 (7.75)

ER114, ER114D, ER114DD,

J114, J114D, J114DD .300 (7.62)

ER134, ER134D, ER134DD,

J134, J134D, J134DD .400 (10.16)

RF100 .315 (8.00)

RF103 .420 (10.67)

“M9” Pad for Centigrid®

122C, A152 .320 (8.13)

ER116C, J116C .300 (7.62)

ER136C, J136C .400 (10.16)

RF180 .325 (8.25)

A150 .305 (7.75)

Notes:

1. Spacer pad material: Polyester  lm.

2. To specify an “M4” or “M9” spacer pad, refer to the mounting variants portion of the part numbering

example in the applicable datasheet.

3. Dimensions are in inches (mm).

4. Unless otherwise speci ed, tolerance is ± .010 (.25).

5. Add 10 m to the contact resistance show in the datasheet.

6. Add 0.01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet.

Ø.150

[3.81]

(REF)

Dim H

MAX

Dim H

MAX

Dim H

MAX

.156

[3.96]

(REF)

.256

[6.5]

(REF)

Dim H

MAX

Appendix A: Spacer Pads

Pad designation and

bottom view dimensions Height For use with the following: Dim. H

Max.

“M” Pad 5/ 6/

ER411T, J411T, ER412, ER412D

ER412DD, J412, J412D, J412DD

ER412T, J412T

.388 (9.86)

712, 712D, 712TN .393 (9.99)

ER431T, J431T, ER432, ER432D

ER432DD, J432, J432D, J432DD

ER432T, J432T

.493 (12.52)

732, 732D, 732TN .503 (12.78)

ER420, J420, ER420D, J420D

ER420DD, J420DD, ER421, J421

ER421D, J421D, ER421DD

J422D, ER422DD, J422DD, 722

.398 (10.11)

“M2” Pad 7/ 8/

ER411T

ER412, ER412D, ER412DD

J412, J412D, J412DD

.441 (11.20)

712, 712D .451 (11.46)

ER421, ER421D, ER421DD

722, 732D .451 (11.46)

ER431T

ER432, ER432D, ER432DD .546 (13.87)

732, 732D .556 (14.12)

“M3” Pad 5/ 6/ 9/

ER411, ER411D, ER411DD

ER411TX

ER412X, ER412DX, ER412DDX

ER412TX

.388 (9.86)

712X, 712DX, 712TNX .393 (9.99)

ER420X, ER420DX, ER420DDX

ER421X, ER421DX, ER421DDX

ER422X, ER422DX

ER422DDX, 722X, 722DDX

.398 (10.11)

ER431, ER431D, ER431DD

ER431TX

ER432X, ER432DX, ER432DDX

ER432TX

.493 (12.52)

732X, 732DX, 732TNX .503 (12.78)

Notes:

1. Spreader pad material: Diallyl Phthalate.

2. To specify an “M”, “M2” or “M3” spreader pad, refer to the mounting variants portion of the part number example

in the applicable datasheet.

3. Dimensions are in inches (mm).

4. Unless otherwise speci ed, tolerance is ± .010” (0.25).

5/. Add 25 m to the contact resistance shown in the datasheet.

6/. Add .01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet.

7/. Add 50 m to the contact resistance shown in the datasheet.

8/. Add 0.025 oz (0.71 g) to the weight of the relay assembly shown in the datasheet.

9/. M3 pad to be used only when the relay has a center pin (e.g. ER411M3-12A, 722XM3-26.)

.370 [9.4]

MAX SQ

.150

[3.81]

.100

[2.54]

.200

[5.08]

.300

[7.62]

.100

[2.54]

Dim H

MAX

.370

[9.4]

MIN

.014

[0.36]

(REF)

.390 [9.91]

.300

[7.62]

.100

[2.54]

.300

[7.62]

.100

[2.54] .150

[3.81]

.150

[3.81]

.130

[3.3]

Dim H

MAX

.370 [9.4]

MAX SQ

.150

[3.81]

.100

[2.54]

.200

[5.08]

.300

[7.62]

.100

[2.54]

Dim H

MAX

.370

[9.4]

MIN

.014

[0.36]

(REF)

Appendix A: Spreader Pads

.100

[2.54]

.100

[2.54]

.100

[2.54]

"Y" POSITION

"Z" POSITION

.100

[2.54]

.100

[2.54]

.100

[2.54]

"W" POSITION

"U" POSITION

(ER116C and ER136C only)

"X" POSITION

"Z" POSITION

"Y" POSITION

.050

[1.27]

36°±3°

Ø.200

[Ø5.08]

"Z" POSITION

"Y" POSITION

"X" POSITION

45°±3°

"Z" POSITION

"Y" POSITION

Ø.200

[Ø5.08]

Centigrid® Relays:

RF100, RF103, ER114, ER134, 172

Centigrid® Relays:

RF180, ER116C, 122C, ER136C

TO-5 Relays:

ER411T, ER412, ER412T, ER420, ER421, ER422,

ER431T, ER432, ER432T, 712, 712TN, 400H, 400K,

400V, RF300, RF303, RF341, RF312, RF310, RF313,

RF320, RF323

TO-5 Relays:

ER411, ER431, RF311, RF331

NOTES

1. Terminal views shown

2. Dimensions are in inches (mm)

3. Tolerances: ± .010 (±.25) unless otherwise speci ed

4. Ground pin positions are within .015 (0.38) dia. of true position

5. Ground pin head dia., 0.035 (0.89) ref: height 0.010 (0.25) ref.

6. Lead dia. 0.017 (0.43) nom.

Indicates ground pin position

Indicates glass insulated lead position

Indicates ground pin or lead position

depending on relay type

Appendix A: Ground Pin Positions