Photologic(R) Reflective Object Sensor OPB760, OPB761, OPB762, OPB763 (Series N and T) OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ) OPB760N Features: * * * * Choice of mounting configurations Choice of four output configurations .040" (10.160 mm) PCBoard mount (N and T series) 12" (304.800 mm) AWG 26 wires (NZ and TZ series) OPB775TZ Description: The OPB760N, OPB760T, OPB770N and OPB770T series of reflective assemblies feature Photologic(R) output. The electrical output can be specified as either TTL Totem-Pole or TTL Open-Collector, either of which can be supplied with inverter or buffer output polarity. OPB760N and OPB760T series devices are designed for PCBoard mounting and have 0.04" (10 mm) long leads. OPB770N and OPB770T series devices are designed for remote mounting with two mounting tags and have 12" (305 mm) long, UL approved 26 AWG wires. All devices in this series offer the added stability of a built-in hysteresis amplifier. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Applications: * * * * * * Non-contact Photologic(R) reflective object sensor Assembly line automation Machine automation Machine safety End of travel sensor Door sensor RoHS Ordering Information Part Number OPB760N OPB761N OPB762N OPB763N OPB760T OPB761T OPB762T OPB763T OPB770NZ OPB771NZ OPB772NZ OPB773NZ OPB770TZ OPB771TZ OPB772TZ OPB773TZ LED Peak Wavelength Sensor Photologic(R) 890 nm Totem-Pole Open Collector Inv-Totem-Pole Inv-Open Collector Totem-Pole Open Collector Inv-Totem-Pole Inv-Open Collector Totem-Pole Open Collector Inv-Totem-Pole Inv-Open Collector Totem-Pole Open Collector Inv-Totem-Pole Inv-Open Collector Reflection Distance (Inch) Min / Max Mounting PCBoard .40" (10.160 mm) leads) 0.080" / 0.220" 12" (304.800 mm) 26 AWG wire OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue B 11/2010 Page 1 of 6 Photologic(R) Reflective Object Sensor OPB760, OPB761, OPB762, OPB763 (Series N and T) OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ) OPB760, OPB770 Buffered Totem-Pole OPB761, OPB771 Buffered Open Collector VCC VCC OUT OUT GND GND OPB762, OPB772 Inverted Totem-Pole OPB763, OPB773 Inverted Open-Collector VCC VCC OUT OUT GND GND OPB760 (N and T Series) OPB770 (NZ and TZ Series) [ MILLIMETERS] X = 0.08" [2.0mm] to 0.22" [5.6mm] DIMENSIONS ARE IN: INCHES Pin # Description Pin# Description Color/Pin# Description Color/Pin# Description 1 Cathode 3 Ground Red-4 Anode White-1 VCC 2 Anode 4 Output Black-5 Cathode Blue-2 Output 5 VCC Green-3 Ground OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 11/2010 Page 2 of 6 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Photologic(R) Reflective Object Sensor OPB760, OPB761, OPB762, OPB763 (Series N and T) OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ) Absolute Maximum Ratings (TA=25C unless otherwise noted) Supply Voltage, VCC (not to exceed 3 seconds) 10 V Storage Temperature Range -40 C to +85 C Operating Temperature Range -40 C to +70 C Lead Soldering Temperature (1/16" inch (1.6 mm) from case for 5 seconds with soldering iron)(1) Input Diode Power Dissipation 260 C (2) 100 mW (3) Output Photologic(R) Power Dissipation 200 mW Total Device Power Dissipation(4) 300 mW Voltage at Output Lead (Open Collector Output) 35 V Diode Forward DC Current 40 mA Diode Reverse DC Voltage 3V Electrical Characteristics (TA = 25C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode VF Forward Voltage - - 1.8 V IF = 40 mA, TA = 25 C IR Reverse Current - - 100 A VR = 2.0 V, TA = 25 C 4.75 - 5.25 V Output Photologic(R) Sensor VCC Operating DC Supply Voltage ICCL Low Level Supply Current: Buffered Totem-Pole Output(5)(6) Buffered Open-Collector Output(5)(6) - - 10 10 mA mA Inverted Totem-Pole Output(5) Inverted Open-Collector Output(5) - - 10 10 mA mA Vcc = 5.25 V, If = 0 mA (output open) High Level Supply Current: Buffered Totem-Pole Output(5)(6) Buffered Open-Collector Output(5) - - 10 10 mA mA Vcc = 5.25 V, If = 25 mA (output open) Inverted Totem-Pole Output(5)(6) Inverted Open-Collector Output(5)(6) - - 10 10 mA mA Vcc = 5.25 V, If = 0 mA (output open) High Level Output Voltage: Buffered Open-Collector Output - - 100 100 A A Vcc = 4.5 V, If = 25 mA, VOH = 30 V, TA=25C Inverted Open-Collector Output - - 100 A Vcc = 4.5 V, If = 0 mA, VOH = 30 V, TA = 25C ICCH Vcc = 5.25 V, If = 0 mA (output open) IOH Notes: (1) (2) (3) (4) (5) (6) (7) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. Derate linearly 2.22 mW/C above 25 C. Derate linearly 4.44 mW/C above 25 C. Derate linearly 6.66 mW/C above 25 C.Normal application would be with light source blocked, simulated by IF=0 mA. Tested at d = 0.080" (mm) from a 90% diffuse white test surface. Normal application would be with light source blocked, simulated by IF = 0 mA. All parameters tested using pulse technique. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue B 11/2010 Page 3 of 6 Photologic(R) Reflective Object Sensor OPB760, OPB761, OPB762, OPB763 (Series N and T) OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ) Electrical Characteristics (TA = 25C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Output Photologic(R) Sensor (continued) IF(+) IF(+)/IF(-) IOS VOL VOH LED Positive-Going Threshold Current(2) - - 25 mA 1.1 - 2.0 - Short Circuit Output Current: Buffered Totem-Pole Output(1) -15 - -100 mA Inverted Totem-Pole Output(1) -15 - -100 mA If = 0 mA, Vcc = 5.25 V, Output = GRD Low Level Output Voltage: Buffered Totem-Pole Output(1)(4) Buffered Open-Collector Output(1)(4) - - 0.4 0.4 V V VCC = 4.5 V, IOL = 12.8 mA, IF = 0 mA or IF = 30 mA Inverted Totem-Pole Output Inverted Open-Collector Output(1)(4) - - 0.4 0.4 V V VCC = 4.5 V, IOL = 12.8 mA, IF = 25 mA High Level Output Voltage: Buffered Totem-Pole Output(1) 2.4 - - V Inverted Totem-Pole Output(1)(4) 2.4 - - V VCC = 4.5 V, IOH = -800 A, IF = 0 mA 2.4 2.4 - - V V VCC = 4.5 V, IOL = -800 A, IF = 30 mA Hysteresis (2) (3) Inverted Totem-Pole Output Inverted Open-Collector Output(3) Vcc = 5 V, TA = 25 C Vcc = 5 V If = 25 mA, Vcc = 5.25 V, Output = GRD VCC = 4.5 V, IOH = -800 A, IF = 25 mA Notes: (1) Tested at d = 0.080" (mm) from a 90% diffuse white test surface. (2) Tested at d = 0.080" (mm), 0.150" (mm) and 0.220" (mm) from a 90% diffuse white test surface. Reference: Eastman Kodak, Catalog #E 152 7795. (3) Tested at d = 0.080" (mm), 0.150" (mm) and 0.220" (mm) from a 5% diffuse black test surface. (4) Normal application would be with light source blocked, simulated by IF=0 mA. (5) OPB760N through OPB763N series devices are terminated with 0.20" (mm) square leads designed for printed PCBoard mounting. (6) OPB770NZ through OPB773NZ series devices are terminated with 12 inches (mm) of 7-strand 26 AWG UL1429 insulated wire on each terminal. A standard AMP No. 640442-5 connector has been attached to the lead wires to ease connection to wire harnesses. (7) OPB760T through OPB763T series devices are terminated with 0.020" (mm) square leads designed for printed PCBoard mounting. (8) OPB770TZ through OPB773TZ series are terminated with 12" (mm) of 7-strand 26 AWG UL1429 insulated wire on each terminal. A standard AMP No. 640442-5 connector has been attached to the lead wires to ease connection to wire harnesses. (9) All parameters tested using pulse technique. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 11/2010 Page 4 of 6 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Photologic(R) Reflective Object Sensor OPB760, OPB761, OPB762, OPB763 (Series N and T) OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ) Logic Level vs Distance 1 1 1 1 1 Kodak 90% - Towards Logic Logic Logic Level vs Distance 1 1 Copy Paper - Towards 1 Kodak 90% - Away Copy Paper - Away 0 0 0 0 0 0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.0 0.1 0.2 Distance (inches) 0.3 0.4 0.5 0.6 0.5 0.6 Distance (inches) Logic Level vs Distance Logic Level vs Distance 1 1 1 1 1 1 Logic Logic Kodak 19% - Towards 1 1 Avery Labels - Towards Kodak 19% - Away 0 0 Avery Labels - Away 0 0 0 0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.0 0.1 Distance (inches) 0.2 0.3 0.4 Distance (inches) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue B 11/2010 Page 5 of 6 Photologic(R) Reflective Object Sensor OPB760, OPB761, OPB762, OPB763 (Series N and T) OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ) Typical Trigger Current and Hysteresis Ratio vs Ambient Temperature Logic Level vs Distance 1 14 IF (+), IF(-) and IF(+)/IF(-) - Trigger Current and Hysteresis Ratio IF(+) mA 1 Logic 1 Retro 3M 3870 - Towards 1 0 Retro 3M 3870 - Away 0 IF(-) mA 12 Hys 10 8 6 4 2 0 0 0.0 0.1 0.2 0.3 0.4 0.5 -40 -30 -20 -10 0.6 Distance (inches) Output Voltage vs Ambient Temperature 10 20 30 40 50 60 70 80 Supply Current vs Ambient Temperature 18 9 16 8 14 7 12 6 Typical Icc (mA) Typical Output Voltage (V) 0 Ta - Ambient Temperature (C) 10 8 5 4 3 6 2 4 Icch(mA) Voh (V) Vol (V) 2 Iccl(mA) 1 0 0 -40 -20 0 20 40 Ta -Ambient Temperature - (C) 60 80 -40 -20 0 20 40 60 80 Ta -Ambient Temperature - (C) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 11/2010 Page 6 of 6 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com