MC3303, MC3403
QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS
SLOS101C – FEBRUAR Y 1979 – REVISED FEBRUAR Y 2002
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
D
Wide Range of Supply Voltages, Single
Supply ...3 V to 36 V or Dual Supplies
D
Class AB Output Stage
D
True Differential Input Stage
D
Low Input Bias Current
D
Internal Frequency Compensation
D
Short-Circuit Protection
D
Designed to Be Interchangeable With
Motorola MC3303, MC3403
description
The MC3303 and the MC3403 are quadruple operational amplifiers similar in performance to the µA741, but
with several distinct advantages. They are designed to operate from a single supply over a range of voltages
from 3 V to 36 V . Operation from split supplies also is possible, provided the difference between the two supplies
is 3 V to 36 V. The common-mode input range includes the negative supply . Output range is from the negative
supply to VCC – 1.5 V. Quiescent supply currents are less than one-half those of the µA741.
The MC3303 is characterized for operation from –40°C to 85°C, and the MC3403 is characterized for operation
from 0°C to 70°C.
AVAILABLE OPTIONS
PACKAGE
TAVIOMAX
AT 25°CPLASTIC
SMALL OUTLINE
(D, NS)
PLASTIC SHRINK
SMALL OUTLINE
(DB)
PLASTIC
DIP
(N)
PLASTIC
THIN SHRINK
SMALL OUTLINE
(PW)
0°C to 70°C10 mV MC3403D
MC3403NS MC3403DB MC3403N MC3403PW
–40°C to 85°C8 mV MC3303D — MC3303N MC3303PW
The D package is available taped and reeled. Add R suffix to the device type (e.g., MC3403DR). The DB, NS,
and PW packages are only available taped and reeled.
logic diagram (each amplifier)
IN+ OUT
IN–
+
–
Copyright 2002, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
1
2
3
4
5
6
7
14
13
12
11
10
9
8
1OUT
1IN–
1IN+
VCC+
2IN+
2IN–
2OUT
4OUT
4IN–
4IN+
VCC–
3IN+
3IN–
3OUT
MC3303 ...D, N, OR PW PACKAGE
MC3403 . . . D, DB, N, NS, OR PW PACKAGE
(TOP VIEW)
MC3303, MC3403
QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS
SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002
2POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
schematic (each amplifier)
IN–
IN+
VCC+
Common
Bias Circuitry
VCC–
Output
To Three
Other
Amplifiers
2.4 kΩ
5 pF
Component values shown are nominal.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage (see Note 1): VCC+ 18 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VCC– –18 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supply voltage, VCC+ with respect to VCC– 36 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Differential input voltage (see Note 2) ±36 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage (see Notes 1 and 3) ±18 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Package thermal impedance, θJA (see Note 4): D package 86°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DB package 96°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
N package 80°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NS package 76°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PW package 113°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, Tstg –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
†Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only , and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may af fect device reliability.
NOTES: 1. These voltage values are with respect to the midpoint between VCC+ and VCC–.
2. Differential voltages are at IN+ with respect to IN–.
3. Neither input must ever be more positive than VCC+ or more negative than VCC–.
4. The package thermal impedance is calculated in accordance with JESD 51-7.
MC3303, MC3403
QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS
SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
recommended operating conditions
MIN MAX UNIT
VCC Supply voltage 5 30 V
Dual su
pp
ly voltage
VCC+ 2.5 15 V
Dual
-
supply
voltage
VCC––2.5 –15 V
TA
O
p
erating free air tem
p
erature
MC3303 –40 85
°C
T
A
Operating
free
-
air
temperature
MC3403 0 70
°C
electrical characteristics at specified free-air temperature, VCC+ = 14 V, VCC– = 0 V for MC3303,
VCC± = ±15 V for MC3403 (unless otherwise noted)
PARAMETER
TEST CONDITIONS†
MC3303 MC3403
UNIT
PARAMETER
TEST
CONDITIONS†
MIN TYP MAX MIN TYP MAX
UNIT
VIO
In
p
ut offset voltage
See Note 5
25°C 2 8 2 10
mV
V
IO
Input
offset
voltage
See
Note
5
Full range 10 12
mV
a
VIO Temperature coefficient
of input offset voltage See Note 5 Full range 10 10 µV/°C
IIO
In
p
ut offset current
See Note 5
25°C 30 75 30 50
nA
I
IO
Input
offset
current
See
Note
5
Full range 250 200
nA
a
IIO Temperature coefficient
of input offset current See Note 5 Full range 50 50 pA/C
IIB
In
p
ut bias current
See Note 5
25°C–0.2 –0.5 –0.2 –0.5
µA
I
IB
Input
bias
current
See
Note
5
Full range –1–0.8 µ
A
VICR Common-mode
input voltage range‡25°CVCC–
to 12 VCC–
to 12.5 VCC–
to 13 VCC–
to 13.5 V
Pk tt
RL = 10 kΩ25°C 12 12.5 ±12 ±13.5
VOM Peak output
voltage swing
RL = 2 kΩ25°C 10 12 ±10 ±13 V
voltage
swing
RL = 2 kΩFull range 10 ±10
AVD
Lar
g
e-si
g
nal differential
VO=±10 V RL=2kΩ
25°C 20 200 20 200
V/mV
A
VD
gg
voltage amplification
V
O =
±10
V
,
R
L =
2
kΩ
Full range 15 15
V/mV
BOM Maximum-output-swing
bandwidth VOPP = 20 V, AVD = 1,
THD ≤5%, RL = 2 kΩ25°C 9 9 kHz
B1Unity-gain bandwidth VO = 50 mV, RL = 10 kΩ25°C 1 1 MHz
φmPhase margin CL = 200 pF, RL = 2 kΩ25°C 60°60°
riInput resistance f = 20 Hz 25°C 0.3 1 0.3 1 MΩ
roOutput resistance f = 20 Hz 25°C 75 75 Ω
CMRR Common-mode
rejection ratio VIC = VICRmin 25°C 70 90 70 90 dB
kSVS Supply voltage
sensitivity
(∆VIO/∆VCC)VCC± = ±2.5 to ±15 V 25°C 30 150 30 150 µV/V
IOS Short-circuit
output current§25°C±10 ±30 ±45 ±10 ±30 ±45 mA
ICC Total supply current No load, See Note 5 25°C 2.8 7 2.8 7 mA
†All characteristics are measured under open-loop conditions with zero common-mode voltage unless otherwise specified. Full range for TA is
–40°C to 85°C for MC3303, and 0°C to 70°C for MC3403.
‡The VICR limits are linked directly, volt-for-volt, to supply voltage; the positive limit is 2 V less than VCC+.
§Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded.
NOTE 5: VIO, IIO, IIB, and ICC are defined at VO = 0 for MC3403 and VO = 7 V for MC3303.
MC3303, MC3403
QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS
SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002
4POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
electrical characteristics, VCC+ = 5 V, VCC– = 0 V, TA = 25°C (unless otherwise noted)
TEST CONDITIONS†
MC3303 MC3403
UNIT
TEST
CONDITIONS†
MIN TYP MAX MIN TYP MAX
UNIT
VIO Input offset voltage VO = 2.5 V 10 2 10 mV
IIO Input offset current VO = 2.5 V 75 30 50 nA
IIB Input bias current VO = 2.5 V –0.5 –0.2 –0.5 µA
‡
RL = 10 kΩ3.3 3.5 3.3 3.5
VOM Peak output voltage swing
‡
RL = 10 kΩ,
VCC+ = 5 V to 30 V VCC+
– 1.7 VCC+
– 1.7 V
AVD
Lar
g
e-si
g
nal
VO=17Vto33VR
L=2kΩ
20
200
20
200
V/mV
A
VD
gg
differential voltage amplification
V
O =
1
.
7
V
to
3
.
3
V
,
R
L =
2
kΩ
20
200
20
200
V/mV
kSVS
Supply-volta
g
e sensitivity
VCC±=±25Vto±15 V
150
150
µV/V
k
SVS
yg y
(∆VIO/∆VCC±)
V
CC± =
±2
.
5
V
to
±15
V
150
150
µ
V/V
ICC Supply current VO = 2.5 V, No load 2.5 7 2.5 7 mA
VO1/VO2 Crosstalk attenuation f = 1 kHZ to 20 kHZ120 120 dB
†All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified.
‡Output will swing essentially to ground.
operating characteristics, VCC+ = 14 V, VCC– = 0 V for MC3303, VCC± = ±15 V for MC3403,
TA = 25°C, AVD = 1 (unless otherwise noted)
PARAMETER TEST CONDITIONS TYP UNIT
SR Slew rate at unity gain VI = ±10 V, CL = 100 pF, RL = 2 kΩ, See Figure 1 0.6 V/µs
trRise time ∆VO = 50 mV, CL = 100 pF, RL = 10 kΩ,See Figure 1 0.35 µs
tfFall time ∆VO = 50 mV, CL = 100 pF, RL = 10 kΩ,See Figure 1 0.35 µs
Overshoot factor ∆VO = 50 mV, CL = 100 pF, RL = 10 kΩ,See Figure 1 20 %
Crossover distortion VI(PP) = 30 mV, VOPP = 2 V, f = 10 kHZ1 %
PARAMETER MEASUREMENT INFORMATION
+
–
RL
CL = 100 pF
VI
OUT
Figure 1. Unity-Gain Amplifier
MC3303, MC3403
QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS
SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS†
|VCC±| – Supply Voltage – V
V
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
RL = 10 kΩ
TA = 25°C
MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE
vs
SUPPLY VOLTAGE
Figure 2
OPP– Maximum Peak-to-Peak Output Voltage – V
30
25
20
15
10
5
00 2 4 6 8 10121416
f – Frequency – Hz
MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE
vs
FREQUENCY
Figure 3
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
VCC± = ±15 V
CL = 0
RL = 10 kΩ
TA = 25°C
See Figure 1
VOPP– Maximum Peak-to-Peak Output Voltage – V
30
25
20
15
10
5
0
1 k 10 k 100 k 1 M
1
f – Frequency – Hz
10
102
103
104
105
106
LARGE-SIGNAL
DIFFERENTIAL VOLTAGE AMPLIFICATION
vs
FREQUENCY
ÎÎÎÎÎ
ÎÎÎÎÎ
VCC± = ±15 V
RL = 2 kΩ
TA = 25°C
A
Figure 4
VD– Large-Signal Differential Voltage Amplification – dB
1 10 100 1 k 10 k 100 k 1 M
Input Output Voltages – V
t – Time –µs
VOLTAGE-FOLLOWER
LARGE-SIGNAL PULSE RESPONSE
Figure 5
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
VCC± = ±15 V
RL = 2 kΩ
TA = 25°C
See Figure 1
10
5
0
–5
–10
0 1020304050 60708090
Output
Input
†Operation of the device at these or any other conditions beyond those indicated under ‘‘recommended operating conditions” is not implied.
MC3303, MC3403
QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS
SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002
6POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS†
I
TA – Free-Air Temperature – °C
ÎÎÎÎÎ
ÎÎÎÎÎ
VCC± = ±15 V
INPUT BIAS CURRENT
vs
FREE-AIR TEMPERATURE
Figure 6
IB– Input Bias Current – mA
250
200
150
100
50
0
–75 –50 –25 0 25 50 75 100 125
INPUT BIAS CURRENT
vs
SUPPLY VOLTAGE
|VCC±| – Supply Voltage – V
ÎÎÎÎ
ÎÎÎÎ
TA = 25°C
Figure 7
IIB– Input Bias Current – mA
250
200
150
100
50
00246810121416
†Operation of the device at these or any other conditions beyond those indicated under ‘‘recommended operating conditions” is not implied.
PACKAGING INFORMATION
Orderable Device Status (1) Package
Type Package
Drawing Pins Package
Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
MC3303D ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3303DE4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3303DG4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3303DR ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3303DRE4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3303DRG4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3303N ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
MC3303NE4 ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
MC3303PW ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3303PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3303PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3303PWR ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3303PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3303PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3403D ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3403DE4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3403DG4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3403DR ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3403DRE4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3403DRG4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3403N ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
MC3403NE4 ACTIVE PDIP N 14 25 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
MC3403NSLE OBSOLETE SO NS 14 TBD Call TI Call TI
MC3403NSR ACTIVE SO NS 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3403NSRG4 ACTIVE SO NS 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 24-May-2007
Addendum-Page 1
Orderable Device Status (1) Package
Type Package
Drawing Pins Package
Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
MC3403PW ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3403PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3403PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3403PWR ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3403PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC3403PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
PACKAGE OPTION ADDENDUM
www.ti.com 24-May-2007
Addendum-Page 2
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
MC3303DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
MC3303PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
MC3403DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
MC3403DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
MC3403NSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
MC3403PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 28-Feb-2011
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
MC3303DR SOIC D 14 2500 346.0 346.0 33.0
MC3303PWR TSSOP PW 14 2000 346.0 346.0 29.0
MC3403DR SOIC D 14 2500 346.0 346.0 33.0
MC3403DR SOIC D 14 2500 333.2 345.9 28.6
MC3403NSR SO NS 14 2000 346.0 346.0 33.0
MC3403PWR TSSOP PW 14 2000 346.0 346.0 29.0
PACKAGE MATERIALS INFORMATION
www.ti.com 28-Feb-2011
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products Applications
Audio www.ti.com/audio Communications and Telecom www.ti.com/communications
Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers
Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps
DLP® Products www.dlp.com Energy and Lighting www.ti.com/energy
DSP dsp.ti.com Industrial www.ti.com/industrial
Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical
Interface interface.ti.com Security www.ti.com/security
Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Power Mgmt power.ti.com Transportation and www.ti.com/automotive
Automotive
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com Wireless www.ti.com/wireless-apps
RF/IF and ZigBee® Solutions www.ti.com/lprfTI E2E Community Home Page e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2011, Texas Instruments Incorporated