CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Upgrade! NPCAP TM PSG - Radial Lead Series Super low ESR, high ripple current capability 2,000 to 5,000 hours at 105 Rated voltage : 16 to 25Vdc RoHS Compliant Halogen Free Endurance: PSG Downsized PSF SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Capacitance Tolerance Surge Voltage Leakage Current -55 to +105 *Note 16 to 25Vdc 20% (M) Rated voltage(V)x1.15 I=0.2CV or 500A, whichever is greater Where, I : Leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Dissipation Factor (tan) 0.12 max. Low Temperature Characteristics (Max.Impedance Ratio) Z(-25)/Z(+20)1.15 Z(-55)/Z(+20)1.25 Endurance Bias Humidity Test Surge Voltage Test Failure Rate (at 20, 120Hz) (at 105) (at 20 after 2 minutes) (at 20, 120Hz) (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 5,000 hours (20, 25V : 2,000 hours) at 105. Appearance No significant damage Capacitance change 20% of the initial value The initial specified value D.F. (tan) ESR 150% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to DC voltage at 60, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) The initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resistor(R=1k) and discharge for 5 minutes 30 seconds. Appearance No significant damage 20% of the initial value Capacitance change The initial specified value D.F. (tan) 150% of the initial specified value ESR The initial specified value Leakage current 0.5% per 1,000 hours maximum (Confidence level 60% at 105) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105. DIMENSIONS [mm] Terminal Code : E F05,F08,H06,H08 D' d F0.5 Coated Case L' 15min. Size code F05 F08 H06 H08 D 6.3 8.0 d 0.45 0.6 F 2.5 3.5 D' D+0.5max. L' L+1.0max. HB5 JB5 10.0 5.0 L+1.5max. MARKING EX) 16V150F G 6D6 150 16V 4min. HB5,JB5 D' d F0.5 Coated Case L' 15min. 4min. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. (1/2) CAT. No. E1001M CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Upgrade! NPCAP TM PSG - Radial Lead Series PART NUMBERING SYSTEM 1 2 3 4 A PSG 5 6 7 8 9 10 11 12 E 13 14 15 16 17 M 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 150F:151) Lead forming*Taping code Terminal code Voltage code (ex. 16V:160,20V:200) Series code Category Please refer to "Product code guide (conductive polymer type)" STANDARD RATINGS WV (Vdc) 16 20 25 Cap (F) DxL (mm) ESR (m max./20, 100k to 300kHz) Rated ripple current (mArms/105, 100kHz) Part No. 150 270 270 470 560 820 1,000 120 330 390 680 56 180 180 220 330 390 6.3x5 6.3x8 8x6 8x8 8x11.5 10x11.5 10x11.5 6.3x5 8x8 8x11.5 10x11.5 6.3x5 8x8 8x11.5 8x11.5 10x11.5 10x11.5 20 15 22 16 14 12 12 20 17 14 12 30 18 16 16 14 14 3,200 3,800 3,300 4,000 4,970 5,400 5,400 3,200 3,880 4,970 5,400 2,600 3,770 4,650 4,650 5,000 5,000 APSG160E151MF05S APSG160E271MF08S APSG160E271MH06S APSG160E471MH08S APSG160E561MHB5S APSG160E821MJB5S APSG160E102MJB5S APSG200E121MF05S APSG200E331MH08S APSG200E391MHB5S APSG200E681MJB5S APSG250E560MF05S APSG250E181MH08S APSG250E181MHB5S APSG250E221MHB5S APSG250E331MJB5S APSG250E391MJB5S Case size : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. (2/2) CAT. No. E1001M