19-1332; Rev 2; 6/07 Low-Voltage, Single-Supply Multiplexer and Switch ____________________________Features The MAX4524/MAX4525 are low-voltage, single-supply CMOS analog switches configured as a 4-channel multiplexer/demultiplexer (MAX4524) and a doublepole/double-throw (DPDT) switch (MAX4525). Both have an inhibit input to simultaneously open all signal paths. These devices operate from a single supply of +2V to +12V and are optimized for operation with +3V or +5V supplies. On-resistance is 200 with a +5V supply and 500 with a +3V supply. Each switch can handle Railto-Rail analog signals. The off-leakage current is only 2nA at +25C or 20nA at +85C. All digital inputs have 0.8V to 2.4V logic thresholds, ensuring TTL/CMOS-logic compatibility when using a single +5V supply. Tiny 10-Pin TDFN Package Single-Supply Operation from +2V to +12V On-Resistance with +5V Supply 200 On-Resistance with +3V Supply 500 On-Resistance Match at +5V Guaranteed 8 ________________________Applications Battery-Operated Equipment Audio and Video Signal Routing Low-Voltage Data-Acquisition Systems Communications Circuits Guaranteed 2nA Max On-Leakage at +5V TTL/CMOS-Logic Compatible _______________Ordering Information PART PINPACKAGE TEMP RANGE TOP MARK 0C to +70C 10 MAX -- MAX4524C/D 0C to +70C Dice* -- MAX4524EUB -40C to +85C 10 MAX -- MAX4524ETB -40C to +85C 10 TDFN-EP** (3mm x 3mm) MAX4524CUB AAP MAX4525CUB 0C to +70C 10 MAX -- MAX4525C/D 0C to +70C Dice* -- MAX4525EUB -40C to +85C 10 MAX -- -40C to +85C 10 TDFN-EP** (3mm x 3mm) MAX4525ETB AAQ *Contact factory for availability. **EP = Exposed Pad. ______________________Pin Configurations/Functional Diagrams/Truth Tables TOP VIEW MAX4525 MAX4524 NOA 1 MAX4525 10 V+ NO3 2 9 COM COMA 2 9 COMB NO1 3 8 NO0 NCA 3 8 NOB INH 4 7 ADDA INH 4 7 NCB GND 5 6 ADDB GND 5 6 ADD LOGIC LOGIC NOA 1 10 V+ 10 V+ NO3 2 9 COM COMA 2 NO1 3 8 NO0 NCA 3 8 NOB 7 ADDA INH 4 7 NCB 6 ADDB GND 5 LOGIC GND 5 TDFN X NONE 0 0 COMA-NCA, COMB-NCB 0 1 COMA-NOA, COMB-NOB MAX4524 NO2 1 INH 4 ADD 1 MAX MAX 9 COMB LOGIC TDFN ON SWITCH INH 10 V+ NO2 1 6 ADD INH ADDB 1 X X NONE 0 0 0 COM-NO0 0 0 1 COM-NO1 0 1 0 COM-NO2 0 1 1 COM-NO3 ADDA ON SWITCH X = DON'T CARE ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. 1 MAX4524/MAX4525 ________________General Description MAX4524/MAX4525 Low-Voltage, Single-Supply Multiplexer and Switch ABSOLUTE MAXIMUM RATINGS (Voltages Referenced to GND) V+ ..............................................................................-0.3V, +13V Voltage into any terminal (Note 1) ................-0.3V to (V+ + 0.3V) Continuous Current into any Terminal ..............................20mA Peak Current, NO, NC or COM_ (pulsed at 1ms,10% duty cycle)....................................40mA ESD per Method 3015.7 ..................................................>2000V Continuous Power Dissipation (TA = +70C) 10-Pin MAX (derate 4.1mW/C above +70C) ............330mW 10-Pin TDFN (derate 24.4mW/C above +70C) ........1951mW Operating Temperature Ranges MAX452_C_ _ ......................................................0C to +70C MAX452_E_ _....................................................-40C to +85C Storage Temperature Range .............................-65C to +150C Note 1: Voltages exceeding V+ or GND on any signal terminal are clamped by internal diodes. Limit forward-diode current to maximum current rating. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS--Single +5V Supply (V+ = 4.5V to 5.5V, GND = 0V, VAH = 2.4V, VAL = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Notes 2, 7) PARAMETER SYMBOL CONDITIONS TEMP MIN TYP MAX (Note 2) UNITS ANALOG SWITCH Analog Signal Range VCOM, VNO C, E COM-NO/NC On-Resistance RON V+ = 4.5V, ICOM = 1mA, VCOM = 3.5V COM-NO/NC On-Resistance Match Between Channels (Note 3) RON V+ = 4.5V, ICOM = 1mA, VCOM = 3.5V COM-NO/NC On-Resistance Flatness (Note 4) RFLAT NO/NC Off-Leakage (Note 5) V+ 90 C, E INO(OFF), INC(OFF), V+ = 5.5V; ICOM = 1mA; VCOM = 1.5V, 2.5V, 3.5V 2 ICOM(OFF) V+ = 5.5V; VNO = 1V, 4.5V; VCOM = 4.5V, 1V MAX4525 ICOM(ON) V+ = 5.5V; VCOM = 4.5V, 1V MAX4525 10 V 15 +25C V+ = 5.5V; VNO = 1V, 4.5V; VCOM = 4.5V, 1V 150 200 C, E MAX4524 COM On-Leakage (Note 5) +25C +25C MAX4524 COM Off-Leakage (Note 5) V- 5 12 +25C -1 +1 C, E -10 +10 +25C -2 +2 C, E -50 +50 +25C -1 +1 C, E -25 +25 +25C -2 +2 C, E -50 +50 +25C -1 +1 C, E -25 +25 nA nA nA DIGITAL I/O Logic Input Logic Threshold High VIH C, E Logic Input Logic Threshold Low VIL C, E 0.8 Input Current High IIH VA = VINH = 2.4V C, E -1 +1 A Input Current Low IIH VA = VINH = 0.8V C, E -1 +1 A 2 1.5 2.4 1.5 _______________________________________________________________________________________ V V Low-Voltage, Single-Supply Multiplexer and Switch (V+ = 4.5V to 5.5V, GND = 0V, VAH = 2.4V, VAL = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Notes 2, 7) PARAMETER SYMBOL CONDITIONS TEMP MIN TYP MAX (Note 2) UNITS SWITCH DYNAMIC CHARACTERISTICS Inhibit Turn-On Time t(ON) VNO_ = 3V, RL = 300, CL = 35pF, Figure 2 Inhibit Turn-Off Time t(OFF) VNO_ = 3V, RL = 300, CL = 35pF, Figure 2 Address Transition Time tTRANS VNO_ = 3V/0V, RL = 300, CL = 35pF, Figure 1 +25C C, E +25C C, E +25C C, E Break-Before-Make Time tBBM VNO_ = 3V, RL = 300, CL = 35pF, Figure 3 +25C Charge Injection (Note 6) Q C = 1nF, RS = 0, VS = 2.5V, Figure 4 +25C NO/NC Off-Capacitance CNO(OFF) VNO_ = 0V, f = 1MHz, Figure 6 COM Off-Capacitance CCOM(OFF) VNO_ = 0V, f = 1MHz, Figure 6 COM On-Capacitance CCOM(ON) VNO_ = 0V, f = 1MHz, Figure 6 90 40 90 5 150 200 120 180 150 200 20 0.8 +25C 4 MAX4524 +25C 14 MAX4525 +25C 6 MAX4524 +25C 20 MAX4525 +25C 12 ns ns ns ns 5 pC pF pF pF Off-Isolation VISO RL = 50, f = 1MHz, Figure 5 +25C -75 dB Channel-to-Channel Crosstalk (MAX4525) VCT RL = 50, f = 1MHz, Figure 5 +25C -74 dB Total Harmonic Distortion THD RL = 600, VCOM = 2.5Vp-p, 20Hz to 20kHz +25C 0.2 % V+ C, E 2 12 V I+ V+ = 5.5V, VADD = VINH = V+ or 0V +25C C, E -1 -10 +1 +10 A POWER SUPPLY Power-Supply Range Power-Supply Current ELECTRICAL CHARACTERISTICS--Single +3V Supply (V+ = 2.7V to 3.6V, GND = 0V, VAH = 2.0V, VAL = 0.5V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Notes 2, 7) PARAMETER SYMBOL CONDITIONS TEMP MIN TYP MAX (Note 2) UNITS ANALOG SWITCH Analog Signal Range COM-NO/NC On-Resistance VCOM, VNO C, E RON V+ = 2.7V, ICOM = 0.1mA, VCOM = 1.5V NO/NC Off-Leakage (Note 6) INO(OFF), INC(OFF) V+ = 3.6V; VNO = 1V, 3V; VCOM = 3V, 1V COM Off-Leakage (Note 6) V+ = 3.6V; VNO = 1V, 3V; ICOM(OFF) VCOM = 3V, 1V MAX4524 MAX4525 V190 V+ V +25C C, E +25C C, E +25C -1 -10 -2 400 500 +1 +10 +2 C, E -50 +50 +25C -1 +1 C, E -25 +25 nA nA ________________________________________________________________________________________ 3 MAX4524/MAX4525 ELECTRICAL CHARACTERISTICS--Single +5V Supply (continued) MAX4524/MAX4525 Low-Voltage, Single-Supply Multiplexer and Switch ELECTRICAL CHARACTERISTICS--Single +3V Supply (continued) (V+ = 2.7V to 3.6V, GND = 0V, VAH = 2.0V, VAL = 0.5V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Notes 2, 7) PARAMETER SYMBOL CONDITIONS TEMP MAX4524 COM On-Leakage (Note 6) ICOM(ON) V+ = 3.6V; VCOM = 3V, 1V MAX4525 MIN TYP MAX (Note 2) +25C -2 +2 C, E -50 +50 +25C -1 +1 C, E -25 +25 UNITS nA DIGITAL I/O Logic Input Logic Threshold High VIH C, E Logic Input Logic Threshold Low VIL C, E 0.5 Input Current High IIH VA = VINH = 2.0V C, E -1 +1 A Input Current Low IIH VA = VINH = 0.5V C, E -1 +1 A 1.0 2.0 1.0 V V SWITCH DYNAMIC CHARACTERISTICS (Note 6) Inhibit Turn-On Time t(ON) VNO_ = 1.5V, RL = 300, CL = 35pF, Figure 2 +25C Inhibit Turn-Off Time t(OFF) VNO_ = 1.5V, RL = 300, CL = 35pF, Figure 2 +25C Address Transition Time tTRANS VNO_ = 1.5V/0V, RL = 300, CL = 35pF, Figure 1 +25C Break-Before-Make Time tBBM 170 C, E 400 50 C, E 200 300 130 C, E Figure 3, VNO_ = 1.5V, RL = 300, CL = 35pF +25C 300 300 400 5 40 ns ns ns ns POWER SUPPLY Power-Supply Current I+ V+ = 3.6V, VADD = VINH = V+ or 0V +25C -1 +1 C, E -10 +10 A Note 2: The algebraic convention is used in this data sheet; the most negative value is shown in the minimum column. Note 3: RON = RON(MAX) - RON(MIN) Note 4: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the specified analog signal ranges; i.e., VNO = 3V to 0V and 0V to 3V. Note 5: Leakage parameters are 100% tested at maximum-rated hot operating temperature, and guaranteed by correlation at TA = +25C. Note 6: Guaranteed by design, not production tested. Note 7: TDFN parts are tested at +25C and are guaranteed by design and correlation over the entire temperature range. 4 _______________________________________________________________________________________ Low-Voltage, Single-Supply Multiplexer and Switch ON-RESISTANCE vs. VCOM AND TEMPERATURE V+ = 1.2V TA = +70C 110 100 MAX4524/25-02 130 MAX4524/25-01 10,000 OFF-LEAKAGE vs. TEMPERATURE TA = +85C MAX4524/25-03 ON-RESISTANCE vs. VCOM V+ = 5.5V 10 90 RON () RON () V+ = 2V V+ = 2.7V V+ = 3.3V V+ = 5V 100 V+ = 7.5V OFF-LEAKAGE (nA) 1000 70 TA = +25C TA = 0C 50 TA = -40C 1 COM OFF 0.1 NO OFF 30 V+ = 10V 10 1 2 3 4 5 6 7 8 9 10 VCOM (V) VCOM (V) ON-LEAKAGE vs. TEMPERATURE CHARGE INJECTION vs. VCOM V+ = 5.5V -25 0 25 50 75 TEMPERATURE (C) 100 125 100 125 100 V+ = 5V VINH = VA = 0V, 5V 0.5 I+ Q (pC) 1000 100 I+, (nA) 0 -0.5 10 -1.0 -1.5 10 -2.0 -2.5 -25 0 25 50 75 TEMPERATURE (C) 100 1 0 125 1 2 3 4 5 TOTAL HARMONIC DISTORTION vs. FREQUENCY 100 600 IN AND OUT LOSS (dB) 1 0.1 MAX4524/25-08 -10 -20 -40 -50 -60 1k 10k 100k 120 100 80 ON LOSS 60 OFF LOSS 40 20 0 ON PHASE -70 -80 -20 -40 -90 -100 -60 -80 -100 -120 50 IN AND OUT -110 -120 0.01 FREQUENCY (Hz) 0 25 50 75 TEMPERATURE (C) FREQUENCY RESPONSE -30 100 -25 0 10 10 -50 VCOM (V) MAX4524/25-07 -50 0.1 1 PHASE (DEGREES) 1 THD (%) ON-LEAKAGE (pA) 10,000 V+ = 5V V- = 0V 1.0 -50 SUPPLY CURRENT vs. TEMPERATURE 1.5 MAX4524/25-04 100,000 0.01 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5..0 MAX4524/25-05 0 MAX4524/25-06 10 10 100 300 FREQUENCY (MHz) _______________________________________________________________________________________ 5 MAX4524/MAX4525 __________________________________________Typical Operating Characteristics (V+ = 5V, GND = 0V, TA = +25C, unless otherwise noted.) Typical Operating Characteristics (continued) (V+ = +5V, GND = 0V, TA = +25C, unless otherwise noted.) V+ CURRENT vs. LOGIC LEVEL LOGIC-LEVEL THRESHOLD vs. V+ 10-1 10-2 MAX4524/25-10 3.0 MAX4524/25-09 1 2.5 VINH, VADD_ (V) V+ = 12V 10-3 10-4 I+ CURRENT MAX4524/MAX4525 Low-Voltage, Single-Supply Multiplexer and Switch 10-5 10-6 V+ = 5V 10-7 2.0 1.5 1.0 10-8 10-9 0.5 10-10 0 10-11 0 1 2 3 4 5 6 7 8 9 10 11 12 0 1 2 VADD_, VINH (V) 3 4 5 6 7 8 9 10 11 12 V+ (V) Pin Description MAX4524 MAX4525 NAME FUNCTION 1 -- NO2 Analog Switch Normally Open Input 2 -- 1 NOA Analog Switch "A" Normally Open Input Analog Switch Normally Open Input 3 2 -- NO3 -- 2 COMA 3 -- NO1 Analog Switch Normally Open Input 1 -- 3 NCA Analog Switch "A" Normally Closed Input 4 4 INH Inhibit. Connect to GND for normal operation. Connect to logic-level high to turn all switches off. 5 5 GND Ground. Connect to digital ground (analog signals have no ground reference, but are limited to V+ and GND). 6 -- ADDB Logic-Level Address Input (see Truth Tables) -- 6 ADD Logic-Level Address Input (see Truth Tables) 7 -- ADDA Logic-Level Address Input (see Truth Tables) -- 7 NCB Analog Switch "B" Normally Closed Input Analog Switch "A" Common 8 -- NO0 Analog Switch Normally Open Input 0 -- 8 NOB Analog Switch "B" Normally Open Input 9 -- COM Analog Switch Common -- 9 COMB 10 10 V+ Positive Analog and Digital Supply-Voltage Input EP EP EP TDFN Package Only. Exposed pad, connect to V+. Analog Switch "A" Common Note: NO_, NC_, and COM_ analog signal pins are identical and interchangeable. Any may be considered an input or output; signals pass equally well in both directions. 6 _______________________________________________________________________________________ Low-Voltage, Single-Supply Multiplexer and Switch Power-Supply Considerations The MAX4524/MAX4525's construction is typical of most CMOS analog switches. They have two supply pins: V+ and GND. V+ and GND are used to drive the internal CMOS switches and set the limits of the analog voltage on any switch. Reverse ESD-protection diodes are internally connected between each analog signal pin and both V+ and GND. If any analog signal exceeds V+ or GND, one of these diodes will conduct. During normal operation, these (and other) reversebiased ESD diodes leak, forming the only current drawn from V+ or GND. Virtually all the analog leakage current comes from the ESD diodes. Although the ESD diodes on a given signal pin are identical, and therefore fairly well balanced, they are reverse-biased differently. Each is biased by either V+ or GND and the analog signal. This means that leakage will vary as the signal varies. The difference in the two diode leakages to the V+ and GND pins constitutes the analog signal-path leakage current. All analog leakage current flows between each pin and one of the supply terminals, not to the other switch terminal. This is why both sides of a given switch can show leakage currents of either the same or opposite polarity. ______________________________________________Test Circuits/Timing Diagrams V+ V+ VADD NO0 ADDA 50 ADDB 50% VADD V+ V+ 0V NO1-NO2 MAX4524 INH VNO0 90% 90% NO3 COM VOUT GND 35pF VOUT 0V 300 tTRANS tTRANS V+ V+ VADD V+ VADD NO ADD 50% 0V 50 VNC MAX4525 INH NC 90% 90% V+ COM VOUT GND 35pF 300 VOUT 0V tTRANS tTRANS REPEAT TEST FOR EACH SECTION. Figure 1. Address Transition Time _______________________________________________________________________________________ 7 MAX4524/MAX4525 __________Applications Information MAX4524/MAX4525 Low-Voltage, Single-Supply Multiplexer and Switch There is no connection between the analog signal paths and GND. V+ and GND power the internal logic and logic-level translators, and set both the input and output logic limits. The logic-level translators convert the logic levels into switched V+ and GND signals to drive the gates of the analog signals. This drive signal is the only connection between the logic supplies (and signals) and the analog supplies. V+ has an ESD-protection diode to GND. Low-Voltage Operation These devices operate from a single supply between +2V and +12V. At room temperature, they actually "work" with a single supply at near or below +1.7V, although as supply voltage decreases, switch on-resistance and switching times become very high. High-Frequency Performance In 50 systems, signal response is reasonably flat up to 50MHz (see Typical Operating Characteristics). Above 20MHz, the on-response has several minor peaks, which are highly layout dependent. The problem is not turning the switch on, but turning it off. The offstate switch acts like a capacitor, and passes higher frequencies with less attenuation. At 10MHz, off-isolation is about -50dB in 50 systems, becoming worse (approximately 20dB per decade) as frequency increases. Higher circuit impedances also degrade offisolation. Adjacent channel attenuation is about 3dB above that of a bare IC socket, and is entirely due to capacitive coupling. _________________________________Test Circuits/Timing Diagrams (continued) V+ V+ NO0 ADDA ADDB 50% VINH V+ V+ 0V NO1-NO3 VNO0 90% MAX4524 VINH INH COM VOUT GND 50 35pF VOUT 90% 0V 300 tOFF tON V+ V+ VINH V+ NO_ ADD V+ 50% 0V NC_ VNO_ 90% MAX4525 VINH INH COM_ VOUT GND 50 35pF 300 VOUT 90% 0V tON REPEAT TEST FOR EACH SECTION. Figure 2. Inhibit Switching Times 8 _______________________________________________________________________________________ tOFF Low-Voltage, Single-Supply Multiplexer and Switch V+ V+ VADD NO0-N03 ADDA V+ ADDB 50 MAX4524 INH VOUT COM GND 50% 0V 35pF 300 tR < 20ns tF < 20ns V+ VADD VCOM 80% V+ VADD VOUT V+ NO_, NC_ ADD V+ 0V tBBM 50 MAX4525 INH VOUT COM_ GND 35pF 300 REPEAT TEST FOR EACH SECTION. Figure 3. Break-Before-Make Interval V+ V+ VINH VNO = 0V V+ NO_ CHANNEL SELECT 0V ADDB ADDA VINH MAX4524 MAX4525 INH 50 VOUT COM_ GND VOUT VOUT CL 1000pF VOUT IS THE MEASURED VOLTAGE DUE TO CHARGETRANSFER ERROR Q WHEN THE CHANNEL TURNS OFF. REPEAT TEST FOR EACH SECTION. Q = VOUT X CL Figure 4. Charge Injection _______________________________________________________________________________________ 9 MAX4524/MAX4525 _________________________________Test Circuits/Timing Diagrams (continued) MAX4524/MAX4525 Low-Voltage, Single-Supply Multiplexer and Switch _________________________________Test Circuits/Timing Diagrams (continued) V+ 10nF VIN V+ CHANNEL SELECT NO_ ADDA ADDB NETWORK ANALYZER 50 50 MAX4524 MAX4525 ON LOSS = 20log VOUT INH OFF ISOLATION = 20log COM_ MEAS. REF. CROSSTALK = 20log GND 50 50 MEASUREMENTS ARE STANDARDIZED AGAINST SHORT AT SOCKET TERMINALS. OFF-ISOLATION IS MEASURED BETWEEN COM AND "OFF" NO TERMINAL ON EACH SWITCH. ON-LOSS IS MEASURED BETWEEN COM AND "ON" NO TERMINAL ON EACH SWITCH. CROSSTALK (MAX4524) IS MEASURED FROM ONE CHANNEL (A, B) TO OTHER CHANNEL. SIGNAL DIRECTION THROUGH SWITCH IS REVERSED; WORST VALUES ARE RECORDED. Figure 5. Off-Isolation, On-Loss, and Crosstalk V+ V+ CHANNEL SELECT NO_ NO_ ADDA ADDB MAX4524 MAX4525 INH COM_ GND 1MHz CAPACITANCE ANALYZER Figure 6. NO/COM Capacitance 10 ______________________________________________________________________________________ VOUT VIN VOUT VIN VOUT VIN Low-Voltage, Single-Supply Multiplexer and Switch MAX4524 NO2 N.C. V+ MAX4525 N.C. N.C. N.C. V+ N.C. N.C. N.C. N.C. NOA COM COMB NO3 COMA N.C. 0.069" (1.75mm) NO0 NO1 NOB 0.069" (1.75mm) NCB NCA ADDA INH N.C. INH N.C. GND N.C. N.C. ADDB 0.053" (1.35mm) GND N.C. ADD 0.053" (1.35mm) N.C. = No Connection TRANSISTOR COUNT: 219 SUBSTRATE CONNECTED TO V+ ______________________________________________________________________________________ 11 MAX4524/MAX4525 __________________________________________________________Chip Topographies Package Information (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to www.maxim-ic.com/packages.) e 10LUMAX.EPS MAX4524/MAX4525 Low-Voltage, Single-Supply Multiplexer and Switch 4X S 10 10 INCHES H O0.500.1 0.60.1 1 1 0.60.1 BOTTOM VIEW TOP VIEW D2 MILLIMETERS MAX DIM MIN 0.043 A 0.006 A1 0.002 A2 0.030 0.037 0.120 D1 0.116 0.118 0.114 D2 0.116 0.120 E1 0.118 E2 0.114 0.199 H 0.187 L 0.0157 0.0275 L1 0.037 REF b 0.007 0.0106 e 0.0197 BSC c 0.0035 0.0078 0.0196 REF S 0 6 MAX MIN 1.10 0.15 0.05 0.75 0.95 3.05 2.95 3.00 2.89 3.05 2.95 2.89 3.00 4.75 5.05 0.40 0.70 0.940 REF 0.177 0.270 0.500 BSC 0.090 0.200 0.498 REF 0 6 E2 GAGE PLANE A2 c A b A1 E1 D1 FRONT VIEW L L1 SIDE VIEW PROPRIETARY INFORMATION TITLE: PACKAGE OUTLINE, 10L uMAX/uSOP APPROVAL DOCUMENT CONTROL NO. 21-0061 12 ______________________________________________________________________________________ REV. 1 1 Low-Voltage, Single-Supply Multiplexer and Switch 6, 8, &10L, DFN THIN.EPS ______________________________________________________________________________________ 13 MAX4524/MAX4525 Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to www.maxim-ic.com/packages.) MAX4524/MAX4525 Low-Voltage, Single-Supply Multiplexer and Switch Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to www.maxim-ic.com/packages.) COMMON DIMENSIONS PACKAGE VARIATIONS SYMBOL MIN. MAX. PKG. CODE N E2 e JEDEC SPEC b [(N/2)-1] x e A 0.70 0.80 T633-2 6 1.500.10 2.300.10 0.95 BSC MO229 / WEEA 0.400.05 1.90 REF D 2.90 3.10 T833-2 8 1.500.10 2.300.10 0.65 BSC MO229 / WEEC 0.300.05 1.95 REF E 2.90 3.10 T833-3 8 1.500.10 2.300.10 0.65 BSC MO229 / WEEC 0.300.05 1.95 REF A1 0.00 0.05 T1033-1 10 1.500.10 2.300.10 0.50 BSC MO229 / WEED-3 0.250.05 2.00 REF L 0.20 0.40 T1033-2 10 1.500.10 2.300.10 0.50 BSC MO229 / WEED-3 0.250.05 2.00 REF D2 k 0.25 MIN. T1433-1 14 1.700.10 2.300.10 0.40 BSC ---- 0.200.05 2.40 REF A2 0.20 REF. T1433-2 14 1.700.10 2.300.10 0.40 BSC ---- 0.200.05 2.40 REF Revision History Pages changed at Rev 2: 1, 2, 4, 6, 13,14 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 14 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 (c) 2007 Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc.