Effective August 2017 Supersedes November 2012 Technical Data 4082 0603ESDA-TR1 ESD suppressor s i y r o Applications * * * * * Computers and peripherals Blu-Ray/DVD players Satellite and HD radio Set top Boxes High speed data ports o USB 2.0/3.0 o High speed Ethernet o Infiniband(R) o IEEE 1394 o DVI o HDMI t n e e v v in d i t c til de e f un n f e r e d o m e m 3 u it n 01 eco n ,2 R o s c . 2 i s l 1 ed nt R2 . i D ri let e -T 19 p A pe cem A2 44 D e a d pl ES et # re 03 she 06 ta da Surface Mount Device Product features * * * * * * * * * * Laptop/notebook/netbook Digital camcorders DSL Modems HDTV Equipment A/V Equipment Cell phones Digital still cameras MP3 / Multimedia players External storage GPS Catalog Number Description * 0603/1608 footprint surface mount device * Ideal ESD protection for high frequency, low voltage applications. * Provides ESD protection with fast response time (<1ns) allowing equipment to pass IEC 61000-4-2 testing * Very low leakage current * Ultra low capacitance (0.15 pF maximum) * Bi-directional 0603ESDA-TR1 5,000 pieces in paper tape on 7 inch diameter (178 mm) reel. Device marking 0603ESDA-TR1 ESD Suppressors are marked on the tape and reel packages, not individually. Since the product is bi-directional and symmetrical, no orientation marking is required. Design considerations Performance Characteristics Units Min Continuous operating voltage Vdc V Clamping voltage2 Typ Max - - 24 - 35 60 Trigger voltage V - 350 - ESD Threat voltage capability4 kV - 8 15 Capacitance (@ 1 kHz ~ 1.8 GHz) pF - - 0.15 Leakage current (@ 12 Vdc) nA 0.01 <0.1 - Peak current2 A - 30 45 Operating temperature C -56 +25 # pulses 20 >500 3 ESD pulse withstand2 +105 1 - 1. Some shifting in characteristics may occur when tested over several hundred ESD pulses at very rapid rate of 1 pulse per second or faster. 2. Per IEC 61000-4-2, 30A @ 8 kV, level 4, clamp measurement made 30 ns after initiation of pulse, all tests in contact discharge mode. 3. Trigger measurement made using Transmission Line Pulse (TLP) method. 4. PolySURGTM devices are capable of withstanding up to a 15 kV, 45 A ESD pulse. Device ratings are given at 8 kV per Note 1, unless otherwise specified. The location in the circuit for the 0603ESDA-TR1 family has to be carefully determined. For better performance, the device should be placed as close to the signal input as possible and ahead of any other component. Due to the high current associated with an ESD event, it is recommended to use a "0stub" pad design (pad directly on the signal/data line and second pad directly on common ground). Processing recommendations The 0603ESDA-TR1 family currently has a convex profile on the top surface of the part. This profile is a result of the construction of the device. They can be processed using standard pick-andplace equipment. The placement and processing techniques for these devices are similar to those used for chip resistors and chip capacitors. 0603ESDA-TR1 ESD suppressor Technical Data 4082 Effective August 2017 Dimensions - mm (in) Recommended Pad Layout - in (mm) (per IPC-SM-782 ) R T s i y r o H 0.60min (0.023 min) t n e e v v in d i t c til de e f un n f e r e d o m e m 3 u it n 01 eco n ,2 R o s c . 2 i s l 1 ed nt R2 . i D ri let e -T 19 p A pe cem A2 44 D e a d pl ES et # re 03 she 06 ta da L 1.0 max (0.039 max) W EIA Size 0603ESDA L W H T R 1.600.10 0.800.10 0.500.10 0.300.20 0.700.10 (0.0630.004) (0.0310.004) (0.0200.004) (0.0120.008) (0.0280.004) Packaging- mm (in) 4.00.1 (.157.004) 2.00.05 (.079.002) B A 2.00.75 (.079.030) 3.50.05 (.138.002) 8.00.30 (.315.012) 4.00.1 (.157.004) 2 1.50.10 (.059.004) Dimension 0603 A 1.900.20 (.0750.008) B 1.100.20 (.0430.008) www.eaton.com/electronics 1.750.1 (.069.004) 2.00.5 (.080.020) 60.01.5 (2.362.059) 178.02.0 (7.008.080) 210.8 (.827.032) 13.00.5 (.512.020) 9.01.5 (.354.059) 1.1 ref (0.043 ref) 0603ESDA-TR1 ESD suppressor Technical Data 4082 Effective August 2017 Environmental Specifications: * Moisture Resistance per EIA/IS-722 Paragraph 4.4.2. This standard is based upon MIL-STD-202G Method 103B but with temperature and relative humidity at +85 C and 85% RH respectively. Test condition `A' (240 Hours) per MIL-STD-202G. * Thermal shock: MIL-STD-202, Method 107G, -55 C to +125 C, 30 min. cycle, 10 cycles. * Vibration: MIL-STD-202F, Method 201A,(10 to 55 to 10 Hz, 1 min. cycle, 2 hours each in X-Y-Z). * Chemical resistance: ASTM D-543, 4 hrs @ +40 C, 3 solutions (H2O, detergent solution, defluxer). * Operating temperature characteristics, measurement at +25 C, +105 C and -56 C. * Full load voltage: 14.4 Vdc, 18 Vdc & 24 Vdc for 1000 hours, +25 C. * Solder leach resistance and terminal adhesion: Per EIA-576. * Solderability: MIL-STD-202, Method 208 (95% coverage). s i y r o t n e e v v in d i t c til de e f un n f e r e d o m e m 3 u it n 01 eco n ,2 R o s c . 2 i s l 1 ed nt R2 . i D ri let e -T 19 p A pe cem A2 44 D e a d pl ES et # re 03 she 06 ta da Soldering Recommendations * Compatible with lead and lead-free solder reflow processes * Peak reflow temperatures and durations: - IR Reflow = +260 C max for 10 sec. max. - Wave Solder = +260 C max. for 10 sec. max. * Recommended IR Reflow Profile: Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Eaton Electronics Division 1000 Eaton Boulevard Cleveland, OH 44122 United States www.eaton.com/electronics (c) 2017 Eaton All Rights Reserved Printed in USA Publication No. 4082 BU-SB12920 August 2017 Eaton is a registered trademark. All other trademarks are property of their respective owners.