08
43
SEK
SEK IEC 60 603-13
SMC male header
Board drillings
Identification Drawing Dimensions in mm
Short levers
for use with female
connector without
strain relief clamp
Long levers
for use with female
connector with
strain relief clamp
1) No polarization slot
for 6, 10 or 14 way male header
2) No polarization slot for 6 way male header
3) Pitch tolerance: ± 0.1
Marking No. 1 contact
No. 1 contact
No. 2 contact
No. 1 contact
No. 2 contact
l Kinked contact: pcb thickness from 1.50 to 1.94 mm after Cu + Sn plating with
non-remelted through holes ø 0.80 to ø 0.95 mm. Max. insertion force = 125 N.
Min. retention force = 6 N.
Non-kinked contact: Solder pins for pcb connections ø 1 ± 0.1 mm as per IEC 60 603-13.
SMC male header with straight solder pins, kinked
Number of contacts
6--64
No. of
A C D E F G
contacts
6 26.9 22.86 12.45 2.54 x 2 = 5.08 36.9 40.3
10 32.0 27.94 17.53 2.54 x 4 = 10.16 42.0 45.4
14 37.1 33.02 22.61 2.54 x 6 = 15.24 47.1 50.4
16 39.6 35.56 25.15 2.54 x 7 = 17.78 49.6 53.0
20 44.7 40.64 30.23 2.54 x 9 = 22.86 54.7 58.1
24 49.8 45.72 35.91 2.54 x 11 = 27.94 59.8 63.2
26 52.3 48.26 37.85 2.54 x 12 = 30.48 62.3 65.7
30 57.7 53.34 43.83 2.54 x 14 = 35.56 68.2 68.6
34 62.5 58.42 48.01 2.54 x 16 = 40.64 72.5 75.8
40 70.1 66.04 55.63 2.54 x 19 = 48.26 80.1 83.5
50 82.8 78.74 68.33 2.54 x 24 = 60.96 92.8 96.2
60 95.5 91.44 81.03 2.54 x 29 = 73.66 105.5 108.9
64 100.6 96.52 86.11 2.54 x 31 = 78.74 110.6 113.9
