MBRS10H100CT ....... MBRS10H200CT 10.0 Amp. Surface Mount Schottky Barrier Rectifier D2PAK Voltage 100 to 200 V Current 10.0 A * Plastic material used carries Underwriters Laboratory Classifications 94V-0 * Metal silicon junction, majority carrier conduction. * Low power loss, high efficiency * High current capability, low forward voltage drop * High surge capability * For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications * Guardring for overvoltage protection * High temperature soldering guaranteed: 260C/10 seconds, 6.35mm from case 4 2 1 3 Mechanical Data PIN 1 PIN 3 CASE PIN 4 * Cases: D2PAK molded plastic * Terminals: Pure tim plated, lead free, solderable per MIL-STD-750, Method 2026 * Polarity: As marked * Mounting position: Any * Mounting torque: 5 in. - Ibs. max * Weight: 2.24 grams Absolute Maximum Ratings, according to IEC publication No. 134 MBRS 10H100CT 100 MBRS 10H150CT 150 MBRS 10H200CT 200 70 105 140 100 150 200 VRRM Maximum Recurrent Peak Reverse Voltage (V) VRMS Maximum RMS Voltage (V) VDC IFSM Maximum DC Blocking Voltage (V) Maximum Average Forward Rectified Current at TC=133C Peak Forward Surge Current, 8.3 ms Single Half sine-wave Superimposed on Rated Load (JEDEC Method) IRRM Peak Repetitive Reverse Surge Current (Note 1) Tj Operating Junction Temperature Range - 65 to + 175 C Tstg Storage Temperature Range - 65 to + 175 C IF (AV) 10 A 120 A 1.0 A 0.5 A Electrical Characteristics MBRS 10H100CT VF IR Rthj-c Notes: Maximum Instantaneous Forward Voltage at (Note 2) IF = 5 A, Tc = 25 C IF = 5 A, Tc = 125 C IF = 10 A, Tc = 25 C IF = 10 A, Tc = 125 C Max. Instantaneous Reverse Current @ TC=25C at Rated DC Blocking Voltage @ TC=125C Typical Thermal Resistance Per Leg (Note 3) MBRS 10H150CT 0.85 V 0.75 V 0.95 V 0.85 V MBRS 10H200CT 0.88 V 0.75 V 0.97 V 0.85 V 5.0 A 1.0 mA 3.5 C/W 1. 2.0 us Pulse Width, f=1.0 KHz 2. Pulse Test: 300us Pulse Width, 1% Duty Cycle 3. Thermal Resistance from Junction to Case Per Leg. Jul - 09 MBRS10H100CT ....... MBRS10H200CT Rating And Characteristic Curves TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FORWARD CURRENT DERATING CURVE 6 Tj = 125 C 40 IF(AV), average forward current (A) IF, instantaneous forward current (A) RESISTIVE OR INDUCTIVE LOAD 20 10 Tj = 25 C 4 2 1 0.4 5 4 3 2 1 Tj = 25 C PULSE WIDTH = 300 s 1% DUTY CYCLE 0.2 0.1 0.6 0.7 0.8 0 0.9 1.0 1.1 1.2 1.3 0 25 50 75 100 125 150 175 VF, forward voltage (V) TC, case temperature (C) MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT TYPICAL JUNCTION CAPACITANCE 5000 180 Tj = 25 C f = 1.0 MHz Vsig = 50mVp-p 150 Cj, junction capacitance (pF) IFSM, peak forward surge current (A) Tj = Tj max. 8.3ms Single Half Sine-Wave (JEDEC Method) 120 90 60 1000 500 30 0 1 10 Number of cycles at 60 Hz. 100 100 0.1 1 10 100 VR, reverse voltage (V) Jul - 09 MBRS10H100CT ....... MBRS10H200CT Rating And Characteristic Curves TYPICAL TRANSIENT THERMAL CHARACTERISTICS PER LEG TYPICAL REVERSE CHARACTERISTICS 100 1 Transient thermal impedance (C/W) IR, instantaneous reverse current (mA) 5 Tj = 125 C 0.1 Tj = 75 C 0.01 0.001 10 1 Tj = 25 C 0.1 0.01 0.0001 0 20 40 60 80 100 120 140 Percent of rated peak reverse voltage (%) PACKAGE MECHANICAL DATA 0.1 1 10 100 t, Pulse durantion (sec.) D2PAK Dimensions in mm. Jul - 09