CTS1, CTS13, 749DX www.vishay.com Vishay Sprague Solid-Electrolyte TANTALEX(R) Capacitors, Hermetically Sealed, Axial-Lead, CECC Approved FEATURES * Terminations: Tin/lead (SnPb), 100 % tin (RoHS compliant) * Hermetically sealed metal case with plastic film insulation * Extended capacitance range (type 749DX) * High operational stability with both time and temperature * Low leakage current * Low dissipation factor * Compliant to RoHS Directive 2011/65/EU Note * Pb containing terminations are not RoHS compliant, exemptions may apply APPLICATIONS Performance and reliability has been proven in a wide range of applications such as: filtering, by-pass, coupling, energy storage, timing circuits. PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to + 85 C (types CTS13) - 55 C to + 125 C (types CTS1, 749DX) SPECIFICATIONS CECC 30201-001 30201-002 30201-005 30201-029 BS 749DX 9073-N001 749DX CTS1 CTS13 749DX ORDERING INFORMATION CTS13 105 X0 040 A 2 P E3 TYPE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 C CASE CODE STYLE NUMBER PACKAGING RoHS COMPLIANT Identifies the basic capacitor design CTS1 = CECC 30201-002 CTS13 = CECC 30201-005 749DX = CECC 30201-001/ CECC 30201-029 Expressed in picofarads. First two digits are significant. Third digit is the number of zeros following. X0 = 20 % X9 = 10 % X5 = 5 % * * Special order Expressed in volts. Where necessary, zeros precede the voltage rating to complete the 3 digit block 6R3 = 6.3 V See Ratings and Case Codes table. 0 = Bare Case 2= Plastic-film insulation See Tape and Reel Packaging E3 = 100 % tin termination (RoHS compliant) Blank = SnPb termination DIMENSIONS in inches [millimeters] 1.500 0.250 [38.10 6.35] 1.500 0.250 [38.10 6.35] L1 - Positive lead + Solid tinned nickel leads J max. 0.047 [1.19] max. 0.125 [3.18] max. CASE CODE L1 0.031 [0.79] J max. D max. A B C D 0.286 [7.26] 0.474 [12.04] 0.686 [17.42] 0.786 [19.96] 0.402 [10.2] 0.590 [15.0] 0.807 [20.5] 0.945 [24.0] 0.141 [3.6] 0.192 [4.9] 0.295 [7.5] 0.364 [9.1] Revision: 07-Mar-12 D dia. LEAD DIAMETER + 10 %, - 0.05 0.020 [0.5] 0.020 [0.5] 0.025 [0.6] 0.025 [0.6] Document Number: 42073 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CTS1, CTS13, 749DX www.vishay.com Vishay Sprague RATINGS AND CASE CODES - TYPE CTS1 RATED VOLTAGE UR (+ 85 C) CR (F ) 6.3 V 10 V 16 V 25 V 40 V 50 V 63 V 33 V 40 V CATEGORY VOLTAGE UC (+ 125 C) 4V 6.3 V 10 V 13 V 25 V 0.10 A 0.12 A 0.15 A 0.18 A 0.22 A 0.27 A A 0.33 A A 0.39 0.47 A A A A A 0.56 A A A 0.68 A A A 0.82 A A B 1.0 A A B 1.2 1.5 A A B B B B B 1.8 A B B B 2.2 A B B B 2.7 A B B B 3.3 A B B B 3.9 A B B B 4.7 A B B C 5.6 A B C C 6.8 A B C C 8.2 B C C C 10 B C C C 12 B C C D 15 B C C D D 18 B C C 22 B C D 27 B C D 33 B C D 39 B C D 47 B C D 56 B 68 C D C D 82 C D 100 C D 120 C D 150 C D 180 D 220 D 270 D 330 D Note * Preferred ratings are in bold characters. Non-preferred ratings are available only with a capacitance tolerance of 10 % or 5 % (special order). Revision: 07-Mar-12 Document Number: 42073 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CTS1, CTS13, 749DX www.vishay.com Vishay Sprague RATINGS AND CASE CODES - TYPE CTS13 CR (F ) RATED VOLTAGE UR (+ 85 C ) 6.3 V 10 V 16 V 20 V 25 V 40 V 50 V 63 V 0.10 A 0.12 A 0.15 A 0.18 A 0.22 A 0.27 A A 0.33 A A 0.39 A A 0.47 A A A 0.56 A A A 0.68 A A A 0.82 A A B 1.0 A A B 1.2 A A B B 1.5 A B B B 1.8 A B B B 2.2 A B B B A B B B A B 2.7 3.3 B B 3.9 A B B B 4.7 A B B C 5.6 A B C C 6.8 A B C C 8.2 B C C C 10 B C C C B C C D B 12 15 C C D 18 B C C D 22 B C D 27 B C D 33 B C D 39 B C D 47 B C D 56 B C 68 D C 82 C 100 C 120 C 150 C 180 D D D D D D 220 D 270 D 330 D Note * Preferred ratings are in bold characters. Non-preferred ratings are available only with a capacitance tolerance of 10 % or 5 % (special order). Revision: 07-Mar-12 Document Number: 42073 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CTS1, CTS13, 749DX www.vishay.com Vishay Sprague RATINGS AND CASE CODES - TYPE 749DX RATED VOLTAGE UR ( + 85 C ) 40 V 50 V 63 V 23 V 25 V 33 V 40 V 0.10 A A 0.12 A A A 0.15 A A A CR (F ) 6.3 V 10 V 16 V 20 V 25 V 35 V CATEGORY VOLTAGE UC ( + 125 C ) 4V 6.3 V 10 V 13 V 16 V 0.068 A 0.18 A A A 0.22 A A A 0.27 A A A 0.33 A A A 0.39 A A A 0.47 A A A 0.56 A A A 0.68 A A A 0.82 A A A B 1.0 A A A B 1.2 A B B B B 1.5 A B B B B 1.8 A B B B B 2.2 A B B B B 2.7 A B B B B 3.3 A B B B B 3.9 A B B B B 4.7 A B B B C 5.6 A B B C C 6.8 A B B C C 8.2 B C C C C 10 B C C C C 12 B C C C D 15 B C C C D D 18 B C C C 22 B C C D 27 B C D D 33 B C D D C D D C D 39 B 47 B 56 B 68 C D C D 82 C D 100 C D 120 C 150 C 180 C 220 D D D D D 270 D 330 D Note * Preferred ratings are in bold characters. Non-preferred ratings are available only with a capacitance tolerance of 10 % or 5 % (special order). Revision: 07-Mar-12 Document Number: 42073 4 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CTS1, CTS13, 749DX www.vishay.com Vishay Sprague STANDARD RATINGS/EXTENDED RATINGS - CTS1 MAX. DF AT + 25 C 120 Hz (%) MAX. IMPEDANCE AT + 25 C 100 kHz () 1.0 6 10 1.0 6 10 CTS1396(1)6R3B(2)(3) 2.3 6 5 B CTS1476(1)6R3B(2)(3) 2.8 6 5 56 B CTS1566(1)6R3B(2)(3) 3.4 6 5 120 C CTS1127(1)6R3C(2)(3) 7.2 6 2 150 C CTS1157(1)6R3C(2)(3) 9.0 6 2 270 D CTS1277(1)6R3D(2)(3) 16.2 6 1 330 D CTS1337(1)6R3D(2)(3) 19.8 8 1 CAPACITANCE (F) CASE CODE PART NUMBER 5.6 A CTS1565(1)6R3A(2)(3) 6.8 A CTS1685(1)6R3A(2)(3) 39 B 47 MAX. DC LEAKAGE AT + 25 C (A) 6.3 VDC AT + 85 C; 4 VDC AT 125 C 10 VDC AT + 85 C; 6.3 VDC AT 125 C 3.9 A CTS1395(1)010A(2)(3) 1.0 6 10 4.7 A CTS1475(1)010A(2)(3) 1.0 6 10 27 B CTS1276(1)010B(2)(3) 2.7 6 5 33 B CTS1336(1)010B(2)(3) 3.3 6 5 82 C CTS1826(1)010C(2)(3) 8.2 6 2 100 C CTS1107(1)010C(2)(3) 10.0 6 2 180 D CTS1187(1)010D(2)(3) 18.0 6 1 220 D CTS1227(1)010D(2)(3) 22.0 8 1 16 VDC AT + 85 C; 10 VDC AT + 125 C 1.8 A CTS1185(1)016A(2)(3) 1.0 6 10 2.2 A CTS1225(1)016A(2)(3) 1.0 6 10 2.7 A CTS1275(1)016A(2)(3) 1.0 6 10 10 3.3 A CTS1335(1)016A(2)(3) 1.0 6 12 B CTS1126(1)016B(2)(3) 1.9 6 5 15 B CTS1156(1)016B(2)(3) 2.4 6 5 18 B CTS1186(1)016B(2)(3) 2.9 6 5 22 B CTS1226(1)016B(2)(3) 3.5 6 5 39 C CTS1396(1)016C(2)(3) 6.2 6 2 47 C CTS1476(1)016C(2)(3) 7.5 6 2 56 C CTS1566(1)016C(2)(3) 9.0 6 2 68 C CTS1686(1)016C(2)(3) 10.9 6 2 82 D CTS1826(1)016D(2)(3) 13.1 6 1 100 D CTS1107(1)016D(2)(3) 16.0 6 1 120 D CTS1127(1)016D(2)(3) 19.2 8 1 150 D CTS1157(1)016D(2)(3) 24.0 8 1 10 25 VDC AT + 85 C; 16 VDC AT + 125 C 1.5 A CTS1155(1)025A(2)(3) 1.0 6 8.2 B CTS1825(1)025B(2)(3) 2.1 6 5 10 B CTS1106(1)025B(2)(3) 2.5 6 5 27 C CTS1276(1)025C(2)(3) 6.8 6 2 33 C CTS1336(1)025C(2)(3) 8.3 6 2 56 D CTS1566(1)025D(2)(3) 14.0 6 1 68 D CTS1686(1)025D(2)(3) 17.0 6 1 Note * Part number definitions: (1) Capacitance tolerance code: X5, X9, X0 (2) Style number: 0 or 2 (3) Packaging code Revision: 07-Mar-12 Document Number: 42073 5 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CTS1, CTS13, 749DX www.vishay.com Vishay Sprague STANDARD RATINGS/EXTENDED RATINGS - CTS1 MAX. DC LEAKAGE AT + 25 C (A) MAX. DF AT + 25 C 120 Hz (%) MAX. IMPEDANCE AT + 25 C 100 kHz () CAPACITANCE (F) CASE CODE PART NUMBER 0.47 A CTS1474(1)040A(2)(3) 1.0 6 10 0.56 A CTS1564(1)040A(2)(3) 1.0 6 10 0.68 A CTS1684(1)040A(2)(3) 1.0 6 10 0.82 A CTS1824(1)040A(2)(3) 1.0 6 10 1.0 A CTS1105(1)040A(2)(3) 1.0 6 10 1.2 A CTS1125(1)040A(2)(3) 1.0 6 10 1.5 B CTS1155(1)040B(2)(3) 1.0 6 5 1.8 B CTS1185(1)040B(2)(3) 1.0 6 5 2.2 B CTS1225(1)040B(2)(3) 1.0 6 5 2.7 B CTS1275(1)040B(2)(3) 1.1 6 5 3.3 B CTS1335(1)040B(2)(3) 1.3 6 5 3.9 B CTS1395(1)040B(2)(3) 1.6 6 5 4.7 B CTS1475(1)040B(2)(3) 1.9 6 5 5.6 B CTS1565(1)040B(2)(3) 2.2 6 5 6.8 B CTS1685(1)040B(2)(3) 2.7 6 5 8.2 C CTS1825(1)040C(2)(3) 3.3 6 2 10 C CTS1106(1)040C(2)(3) 4.0 6 2 12 C CTS1126(1)040C(2)(3) 4.8 6 2 15 C CTS1156(1)040C(2)(3) 6.0 6 2 18 C CTS1186(1)040C(2)(3) 7.2 6 2 22 C CTS1226(1)040C(2)(3) 8.8 6 2 27 D CTS1276(1)040D(2)(3) 10.8 6 1 33 D CTS1336(1)040D(2)(3) 13.2 6 1 39 D CTS1396(1)040D(2)(3) 15.6 6 1 47 D CTS1476(1)040D(2)(3) 18.8 6 1 0.27 A CTS1274(1)050A(2)(3) 1.0 6 10 0.33 A CTS1334(1)050A(2)(3) 1.0 6 10 0.39 A CTS1394(1)050A(2)(3) 1.0 6 10 0.47 A CTS1474(1)050A(2)(3) 1.0 6 10 0.56 A CTS1564(1)050A(2)(3) 1.0 6 10 0.68 A CTS1684(1)050A(2)(3) 1.0 6 10 0.82 A CTS1824(1)050A(2)(3) 1.0 6 10 1.0 A CTS1105(1)050A(2)(3) 1.0 6 10 1.2 B CTS1125(1)050B(2)(3) 1.0 6 5 1.5 B CTS1155(1)050B(2)(3) 1.0 6 5 1.8 B CTS1185(1)050B(2)(3) 1.0 6 5 2.2 B CTS1225(1)050B(2)(3) 1.1 6 5 2.7 B CTS1275(1)050B(2)(3) 1.4 6 5 3.3 B CTS1335(1)050B(2)(3) 1.7 6 5 3.9 B CTS1395(1)050B(2)(3) 2.0 6 5 40 VDC AT + 85 C; 25 VDC AT + 125 C 50 VDC AT + 85 C; 33 VDC AT + 125 C Note * Part number definitions: (1) Capacitance tolerance code: X5, X9, X0 (2) Style number: 0 or 2 (3) Packaging code Revision: 07-Mar-12 Document Number: 42073 6 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CTS1, CTS13, 749DX www.vishay.com Vishay Sprague STANDARD RATINGS/EXTENDED RATINGS - CTS1 MAX. DF AT + 25 C 120 Hz (%) MAX. IMPEDANCE AT + 25 C 100 kHz () 2.4 6 5 2.8 6 2 CTS1685(1)050C(2)(3) 3.4 6 2 C CTS1825(1)050C(2)(3) 4.1 6 2 10 C CTS1106(1)050C(2)(3) 5.0 6 2 12 C CTS1126(1)050C(2)(3) 6.0 6 2 15 C CTS1156(1)050C(2)(3) 7.5 6 2 18 C CTS1186(1)050C(2)(3) 9.0 6 2 22 D CTS1226(1)050D(2)(3) 11.0 6 1 CAPACITANCE (F) CASE CODE PART NUMBER 4.7 B CTS1475(1)050B(2)(3) 5.6 C CTS1565(1)050C(2)(3) 6.8 C 8.2 MAX. DC LEAKAGE AT + 25 C (A) 50 VDC AT + 85 C; 33 VDC AT + 125 C 63 VDC AT + 85 C; 40 VDC AT + 125 C 0.10 A CTS1104(1)063A(2)(3) 1.0 6 10 0.12 A CTS1124(1)063A(2)(3) 1.0 6 10 0.15 A CTS1154(1)063A(2)(3) 1.0 6 10 0.18 A CTS1184(1)063A(2)(3) 1.0 6 10 0.22 A CTS1224(1)063A(2)(3) 1.0 6 10 0.27 A CTS1274(1)063A(2)(3) 1.0 6 10 0.33 A CTS1334(1)063A(2)(3) 1.0 6 10 0.39 A CTS1394(1)063A(2)(3) 1.0 6 10 0.47 A CTS1474(1)063A(2)(3) 1.0 6 10 0.56 A CTS1564(1)063A(2)(3) 1.0 6 10 0.68 A CTS1684(1)063A(2)(3) 1.0 6 10 0.82 B CTS1824(1)063B(2)(3) 1.0 6 5 1.0 B CTS1105(1)063B(2)(3) 1.0 6 5 1.2 B CTS1125(1)063B(2)(3) 1.0 6 5 1.5 B CTS1155(1)063B(2)(3) 1.0 6 5 1.8 B CTS1185(1)063B(2)(3) 1.1 6 5 2.2 B CTS1225(1)063B(2)(3) 1.4 6 5 2.7 B CTS1275(1)063B(2)(3) 1.7 6 5 3.3 B CTS1335(1)063B(2)(3) 2.1 6 5 3.9 B CTS1395(1)063B(2)(3) 2.5 6 5 4.7 C CTS1475(1)063C(2)(3) 3.0 6 2 5.6 C CTS1565(1)063C(2)(3) 3.5 6 2 6.8 C CTS1685(1)063C(2)(3) 4.3 6 2 8.2 C CTS1825(1)063C(2)(3) 5.2 6 2 10 C CTS1106(1)063C(2)(3) 6.3 6 2 12 D CTS1126(1)063D(2)(3) 7.6 6 1 15 D CTS1156(1)063D(2)(3) 9.5 6 1 18 D CTS1186(1)063D(2)(3) 11.3 6 1 Note * Part number definitions: (1) Capacitance tolerance code: X5, X9, X0 (2) Style number: 0 or 2 (3) Packaging code Revision: 07-Mar-12 Document Number: 42073 7 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CTS1, CTS13, 749DX www.vishay.com Vishay Sprague STANDARD RATINGS/EXTENDED RATINGS - CTS13 CAPACITANCE (F) CASE CODE 5.6 6.8 39 47 56 120 150 270 330 A A B B B C C D D 3.9 4.7 27 33 82 100 180 220 A A B B C C D D 2.7 3.3 18 22 56 68 120 150 A A B B C C D D 1.8 2.2 12 15 39 47 82 100 A A B B C C D D 1.2 1.5 8.2 10 27 33 56 68 A A B B C C D D PART NUMBER MAX. DF AT + 25 C 120 Hz (%) MAX. IMPEDANCE AT + 25 C 100 kHz () 1.0 1.0 2.3 2.8 3.4 7.2 9.0 16.2 19.8 6 6 6 6 6 6 6 6 8 10 10 5 5 5 2 2 1 1 1.0 1.0 2.7 3.3 8.2 10.0 18.0 22.0 6 6 6 6 6 6 6 8 10 10 5 5 2 2 1 1 1.0 1.0 2.9 3.5 9.0 10.9 19.2 24.0 6 6 6 6 6 6 8 8 10 10 5 5 2 2 1 1 1.0 1.0 2.4 3.0 7.8 9.4 16.4 20.0 6 6 6 6 6 6 6 8 10 10 5 5 2 2 1 1 1.0 1.0 2.1 2.5 6.8 8.3 14.0 17.0 6 6 6 6 6 6 6 6 10 10 5 5 2 2 1 1 MAX. DC LEAKAGE AT + 25 C (A) 6.3 VDC AT + 85 C CTS13565(1)6R3A(2)(3) CTS13685(1)6R3A(2)(3) CTS13396(1)6R3B(2)(3) CTS13476(1)6R3B(2)(3) CTS13566(1)6R3B(2)(3) CTS13127(1)6R3C(2)(3) CTS13157(1)6R3C(2)(3) CTS13277(1)6R3D(2)(3) CTS13337(1)6R3D(2)(3) 10 VDC AT + 85 C CTS13395(1)010A(2)(3) CTS13475(1)010A(2)(3) CTS13276(1)010B(2)(3) CTS13336(1)010B(2)(3) CTS13826(1)010C(2)(3) CTS13107(1)010C(2)(3) CTS13187(1)010D(2)(3) CTS13227(1)010D(2)(3) 16 VDC AT + 85 C CTS13275(1)016A(2)(3) CTS13335(1)016A(2)(3) CTS13186(1)016B(2)(3) CTS13226(1)016B(2)(3) CTS13566(1)016C(2)(3) CTS13686(1)016C(2)(3) CTS13127(1)016D(2)(3) CTS13157(1)016D(2)(3) 20 VDC AT + 85 C CTS13185(1)020A(2)(3) CTS13225(1)020A(2)(3) CTS13126(1)020B(2)(3) CTS13156(1)020B(2)(3) CTS13396(1)020C(2)(3) CTS13476(1)020C(2)(3) CTS13826(1)020D(2)(3) CTS13107(1)020D(2)(3) 25 VDC AT + 85 C CTS13125(1)025A(2)(3) CTS13155(1)025A(2)(3) CTS13825(1)025B(2)(3) CTS13106(1)025B(2)(3) CTS13276(1)025C(2)(3) CTS13336(1)025C(2)(3) CTS13566(1)025D(2)(3) CTS13686(1)025D(2)(3) Note * Part number definitions: (1) Capacitance tolerance code: X5, X9, X0 (2) Style number: 0 or 2 (3) Packaging code Revision: 07-Mar-12 Document Number: 42073 8 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CTS1, CTS13, 749DX www.vishay.com Vishay Sprague STANDARD RATINGS/EXTENDED RATINGS - CTS13 MAX. DC LEAKAGE AT + 25 C (A) MAX. DF AT + 25 C 120 Hz (%) MAX. IMPEDANCE AT + 25 C 100 kHz () CAPACITANCE (F) CASE CODE PART NUMBER 0.47 A CTS13474(1)040A(2)(3) 1.0 6 10 0.56 A CTS13564(1)040A(2)(3) 1.0 6 10 0.68 A CTS13684(1)040A(2)(3) 1.0 6 10 0.82 A CTS13824(1)040A(2)(3) 1.0 6 10 1.0 A CTS13105(1)040A(2)(3) 1.0 6 10 1.2 A CTS13125(1)040A(2)(3) 1.0 6 10 1.5 B CTS13155(1)040B(2)(3) 1.0 6 5 1.8 B CTS13185(1)040B(2)(3) 1.0 6 5 2.2 B CTS13225(1)040B(2)(3) 1.0 6 5 2.7 B CTS13275(1)040B(2)(3) 1.1 6 5 3.3 B CTS13335(1)040B(2)(3) 1.3 6 5 3.9 B CTS13395(1)040B(2)(3) 1.6 6 5 4.7 B CTS13475(1)040B(2)(3) 1.9 6 5 5.6 B CTS13565(1)040B(2)(3) 2.2 6 5 6.8 B CTS13685(1)040B(2)(3) 2.7 6 5 8.2 C CTS13825(1)040C(2)(3) 3.3 6 2 10 C CTS13106(1)040C(2)(3) 4.0 6 2 12 C CTS13126(1)040C(2)(3) 4.8 6 2 15 C CTS13156(1)040C(2)(3) 6.0 6 2 18 C CTS13186(1)040C(2)(3) 7.2 6 2 22 C CTS13226(1)040C(2)(3) 8.8 6 2 27 D CTS13276(1)040D(2)(3) 10.8 6 1 33 D CTS13336(1)040D(2)(3) 13.2 6 1 39 D CTS13396(1)040D(2)(3) 15.6 6 1 47 D CTS13476(1)040D(2)(3) 18.8 6 1 0.27 A CTS13274(1)050A(2)(3) 1.0 6 10 0.33 A CTS13334(1)050A(2)(3) 1.0 6 10 0.39 A CTS13394(1)050A(2)(3) 1.0 6 10 0.47 A CTS13474(1)050A(2)(3) 1.0 6 10 0.56 A CTS13564(1)050A(2)(3) 1.0 6 10 0.68 A CTS13684(1)050A(2)(3) 1.0 6 10 0.82 A CTS13824(1)050A(2)(3) 1.0 6 10 1.0 A CTS13105(1)050A(2)(3) 1.0 6 10 1.2 B CTS13125(1)050B(2)(3) 1.0 6 5 1.5 B CTS13155(1)050B(2)(3) 1.0 6 5 1.8 B CTS13185(1)050B(2)(3) 1.0 6 5 2.2 B CTS13225(1)050B(2)(3) 1.1 6 5 2.7 B CTS13275(1)050B(2)(3) 1.4 6 5 3.3 B CTS13335(1)050B(2)(3) 1.7 6 5 3.9 B CTS13395(1)050B(2)(3) 2.0 6 5 40 VDC AT + 85 C 50 VDC AT + 85 C Note * Part number definitions: (1) Capacitance tolerance code: X5, X9, X0 (2) Style number: 0 or 2 (3) Packaging code Revision: 07-Mar-12 Document Number: 42073 9 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CTS1, CTS13, 749DX www.vishay.com Vishay Sprague STANDARD RATINGS/EXTENDED RATINGS - CTS13 MAX. DC LEAKAGE AT + 25 C (A) MAX. DF AT + 25 C 120 Hz (%) MAX. IMPEDANCE AT + 25 C 100 kHz () CAPACITANCE (F) CASE CODE PART NUMBER 4.7 B CTS13475(1)050B(2)(3) 2.4 6 5 5.6 C CTS13565(1)050C(2)(3) 2.8 6 2 6.8 C CTS13685(1)050C(2)(3) 3.4 6 2 8.2 C CTS13825(1)050C(2)(3) 4.1 6 2 10 C CTS13106(1)050C(2)(3) 5.0 6 2 12 C CTS13126(1)050C(2)(3) 6.0 6 2 15 C CTS13156(1)050C(2)(3) 7.5 6 2 18 C CTS13186(1)050C(2)(3) 9.0 6 2 22 D CTS13226(1)050D(2)(3) 11.0 6 1 50 VDC AT + 85 C 63 VDC AT + 85 C 0.10 A CTS13104(1)063A(2)(3) 1.0 6 10 0.12 A CTS13124(1)063A(2)(3) 1.0 6 10 0.15 A CTS13154(1)063A(2)(3) 1.0 6 10 0.18 A CTS13184(1)063A(2)(3) 1.0 6 10 0.22 A CTS13224(1)063A(2)(3) 1.0 6 10 0.27 A CTS13274(1)063A(2)(3) 1.0 6 10 0.33 A CTS13334(1)063A(2)(3) 1.0 6 10 0.39 A CTS13394(1)063A(2)(3) 1.0 6 10 0.47 A CTS13474(1)063A(2)(3) 1.0 6 10 0.56 A CTS13564(1)063A(2)(3) 1.0 6 10 0.68 A CTS13684(1)063A(2)(3) 1.0 6 10 0.82 B CTS13824(1)063B(2)(3) 1.0 6 5 1.0 B CTS13105(1)063B(2)(3) 1.0 6 5 1.2 B CTS13125(1)063B(2)(3) 1.0 6 5 1.5 B CTS13155(1)063B(2)(3) 1.0 6 5 1.8 B CTS13185(1)063B(2)(3) 1.1 6 5 2.2 B CTS13225(1)063B(2)(3) 1.4 6 5 2.7 B CTS13275(1)063B(2)(3) 1.7 6 5 3.3 B CTS13335(1)063B(2)(3) 2.1 6 5 3.9 B CTS13395(1)063B(2)(3) 2.5 6 5 4.7 C CTS13475(1)063C(2)(3) 3.0 6 2 5.6 C CTS13565(1)063C(2)(3) 3.5 6 2 6.8 C CTS13685(1)063C(2)(3) 4.3 6 2 8.2 C CTS13825(1)063C(2)(3) 5.2 6 2 10 C CTS13106(1)063C(2)(3) 6.3 6 2 12 D CTS13126(1)063D(2)(3) 7.6 6 1 15 D CTS13156(1)063D(2)(3) 9.5 6 1 18 D CTS13186(1)063D(2)(3) 11.3 6 1 Note * Part number definitions: (1) Capacitance tolerance code: X5, X9, X0 (2) Style number: 0 or 2 (3) Packaging code Revision: 07-Mar-12 Document Number: 42073 10 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CTS1, CTS13, 749DX www.vishay.com Vishay Sprague STANDARD RATINGS/EXTENDED RATINGS - 749DX MAX. DF AT + 25 C 120 Hz (%) MAX. IMPEDANCE AT + 25 C 100 kHz () 1.0 6 10 1.0 6 10 749DX476(1)6R3B(2)(3) 2.8 6 5 749DX566(1)6R3B(2)(3) 3.4 6 5 C 749DX157(1)6R3C(2)(3) 9.0 8 2 180 C 749DX187(1)6R3C(2)(3) 10.8 8 2 270 D 749DX277(1)6R3D(2)(3) 16.2 8 1 330 D 749DX337(1)6R3D(2)(3) 19.8 8 1 3.9 A 749DX395(1)010A(2)(3) 1.0 6 10 4.7 A 749DX475(1)010A(2)(3) 1.0 6 10 27 B 749DX276(1)010B(2)(3) 2.7 6 5 33 B 749DX336(1)010B(2)(3) 3.3 6 5 39 B 749DX396(1)010B(2)(3) 3.9 6 5 CAPACITANCE (F) CASE CODE PART NUMBER 5.6 A 749DX565(1)6R3A(2)(3) 6.8 A 749DX685(1)6R3A(2)(3) 47 B 56 B 150 MAX. DC LEAKAGE AT + 25 C (A) 6.3 VDC AT + 85 C; 4 VDC AT 125 C 10 VDC AT + 85 C; 6.3 VDC AT 125 C 82 C 749DX826(1)010C(2)(3) 8.2 6 2 100 C 749DX107(1)010C(2)(3) 10.0 6 2 120 C 749DX127(1)010C(2)(3) 12.0 8 2 180 D 749DX187(1)010D(2)(3) 18.0 8 1 220 D 749DX227(1)010D(2)(3) 22.0 8 1 2.7 A 749DX275(1)016A(2)(3) 1.0 6 10 3.3 A 749DX335(1)016A(2)(3) 1.0 6 10 18 B 749DX186(1)016B(2)(3) 2.9 6 5 22 B 749DX226(1)016B(2)(3) 3.5 6 5 56 C 749DX566(1)016C(2)(3) 9.0 6 2 16 VDC AT + 85 C; 10 VDC AT + 125 C 68 C 749DX686(1)016C(2)(3) 10.9 6 2 120 D 749DX127(1)016D(2)(3) 19.2 8 1 150 D 749DX157(1)016D(2)(3) 24.0 8 1 20 VDC AT + 85 C; 13 VDC AT + 125 C 1.8 A 749DX185(1)020A(2)(3) 1.0 6 10 2.2 A 749DX225(1)020A(2)(3) 1.0 6 10 12 B 749DX126(1)020B(2)(3) 2.4 6 5 15 B 749DX156(1)020B(2)(3) 3.0 6 5 39 C 749DX396(1)020C(2)(3) 7.8 6 2 47 C 749DX476(1)020C(2)(3) 9.4 6 2 82 D 749DX826(1)020D(2)(3) 16.4 6 1 100 D 749DX107(1)020D(2)(3) 20.0 6 1 25 VDC AT + 85 C; 16 VDC AT + 125 C 1.2 A 749DX125(1)025A(2)(3) 1.0 6 10 1.5 A 749DX155(1)025A(2)(3) 1.0 6 10 8.2 B 749DX825(1)025B(2)(3) 2.1 6 5 Note * Part number definitions: (1) Capacitance tolerance code: X5, X9, X0 (2) Style number: 0 or 2 (3) Packaging code Revision: 07-Mar-12 Document Number: 42073 11 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CTS1, CTS13, 749DX www.vishay.com Vishay Sprague STANDARD RATINGS/EXTENDED RATINGS - 749DX MAX. DF AT + 25 C 120 Hz (%) MAX. IMPEDANCE AT + 25 C 100 kHz () 2.5 6 5 6.8 6 2 749DX336(1)025C(2)(3) 8.3 6 2 749DX566(1)025D(2)(3) 14.0 6 1 749DX686(1)025D(2)(3) 17.0 6 1 CAPACITANCE (F) CASE CODE PART NUMBER 10 B 749DX106(1)025B(2)(3) 27 C 749DX276(1)025C(2)(3) 33 C 56 D 68 D MAX. DC LEAKAGE AT + 25 C (A) 25 VDC AT + 85 C; 16 VDC AT + 125 C 35 VDC AT + 85 C; 23 VDC AT + 125 C 0.10 A 749DX104(1)035A(2)(3) 1.0 6 10 0.12 A 749DX124(1)035A(2)(3) 1.0 6 10 0.15 A 749DX154(1)035A(2)(3) 1.0 6 10 0.18 A 749DX184(1)035A(2)(3) 1.0 6 10 0.22 A 749DX224(1)035A(2)(3) 1.0 6 10 0.27 A 749DX274(1)035A(2)(3) 1.0 6 10 0.33 A 749DX334(1)035A(2)(3) 1.0 6 10 0.39 A 749DX394(1)035A(2)(3) 1.0 6 10 0.47 A 749DX474(1)035A(2)(3) 1.0 6 10 0.56 A 749DX564(1)035A(2)(3) 1.0 6 10 0.68 A 749DX684(1)035A(2)(3) 1.0 6 10 0.82 A 749DX824(1)035A(2)(3) 1.0 6 10 1.0 A 749DX105(1)035A(2)(3) 1.0 6 10 1.2 B 749DX125(1)035B(2)(3) 1.0 6 5 1.5 B 749DX155(1)035B(2)(3) 1.0 6 5 1.8 B 749DX185(1)035B(2)(3) 1.0 6 5 2.2 B 749DX225(1)035B(2)(3) 1.0 6 5 2.7 B 749DX275(1)035B(2)(3) 1.0 6 5 3.3 B 749DX335(1)035B(2)(3) 1.2 6 5 3.9 B 749DX395(1)035B(2)(3) 1.4 6 5 4.7 B 749DX475(1)035B(2)(3) 1.6 6 5 5.6 B 749DX565(1)035B(2)(3) 2.0 6 5 6.8 B 749DX685(1)035B(2)(3) 2.4 6 5 8.2 C 749DX825(1)035C(2)(3) 2.9 6 2 10 C 749DX106(1)035C(2)(3) 3.5 6 2 12 C 749DX126(1)035C(2)(3) 4.2 6 2 15 C 749DX156(1)035C(2)(3) 5.3 6 2 18 C 749DX186(1)035C(2)(3) 6.3 6 2 22 C 749DX226(1)035C(2)(3) 7.7 6 2 27 D 749DX276(1)035D(2)(3) 9.5 6 1 33 D 749DX336(1)035D(2)(3) 11.6 6 1 39 D 749DX396(1)035D(2)(3) 13.7 6 1 47 D 749DX476(1)035D(2)(3) 16.5 6 1 56 D 749DX566(1)035D(2)(3) 19.6 6 1 Note * Part number definitions: (1) Capacitance tolerance code: X5, X9, X0 (2) Style number: 0 or 2 (3) Packaging code Revision: 07-Mar-12 Document Number: 42073 12 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CTS1, CTS13, 749DX www.vishay.com Vishay Sprague STANDARD RATINGS/EXTENDED RATINGS - 749DX MAX. DC LEAKAGE AT + 25 C (A) MAX. DF AT + 25 C 120 Hz (%) MAX. IMPEDANCE AT + 25 C 100 kHz () CAPACITANCE (F) CASE CODE PART NUMBER 0.10 A 749DX104(1)040A(2)(3) 1.0 6 10 0.12 A 749DX124(1)040A(2)(3) 1.0 6 10 0.15 A 749DX154(1)040A(2)(3) 1.0 6 10 0.18 A 749DX184(1)040A(2)(3) 1.0 6 10 0.22 A 749DX224(1)040A(2)(3) 1.0 6 10 0.27 A 749DX274(1)040A(2)(3) 1.0 6 10 0.33 A 749DX334(1)040A(2)(3) 1.0 6 10 0.39 A 749DX394(1)040A(2)(3) 1.0 6 10 0.47 A 749DX474(1)040A(2)(3) 1.0 6 10 0.56 A 749DX564(1)040A(2)(3) 1.0 6 10 0.68 A 749DX684(1)040A(2)(3) 1.0 6 10 0.82 A 749DX824(1)040A(2)(3) 1.0 6 10 40 VDC AT + 85 C; 25 VDC AT + 125 C 1.0 A 749DX105(1)040A(2)(3) 1.0 6 10 1.2 B 749DX125(1)040B(2)(3) 1.0 6 5 1.5 B 749DX155(1)040B(2)(3) 1.0 6 5 1.8 B 749DX185(1)040B(2)(3) 1.0 6 5 2.2 B 749DX225(1)040B(2)(3) 1.0 6 5 2.7 B 749DX275(1)040B(2)(3) 1.1 6 5 3.3 B 749DX335(1)040B(2)(3) 1.3 6 5 3.9 B 749DX395(1)040B(2)(3) 1.6 6 5 4.7 B 749DX475(1)040B(2)(3) 1.9 6 5 5.6 B 749DX565(1)040B(2)(3) 2.2 6 5 6.8 B 749DX685(1)040B(2)(3) 2.7 6 5 8.2 C 749DX825(1)040C(2)(3) 3.3 6 2 10 C 749DX106(1)040C(2)(3) 4.0 6 2 12 C 749DX126(1)040C(2)(3) 4.8 6 2 15 C 749DX156(1)040C(2)(3) 6.0 6 2 18 C 749DX186(1)040C(2)(3) 7.2 6 2 22 C 749DX226(1)040C(2)(3) 8.8 6 2 27 D 749DX276(1)040D(2)(3) 10.8 6 1 33 D 749DX336(1)040D(2)(3) 13.2 6 1 39 D 749DX396(1)040D(2)(3) 15.6 6 1 6 10 50 VDC AT + 85 C; 33 VDC AT + 125 C 0.82 A 749DX824(1)050A(2)(3) 1.0 1.0 A 749DX105(1)050A(2)(3) 1.0 6 10 1.2 B 749DX125(1)050B(2)(3) 1.0 6 5 1.5 B 749DX155(1)050B(2)(3) 1.0 6 5 1.8 B 749DX185(1)050B(2)(3) 1.0 6 5 2.2 B 749DX225(1)050B(2)(3) 1.1 6 5 2.7 B 749DX275(1)050B(2)(3) 1.4 6 5 3.3 B 749DX335(1)050B(2)(3) 1.7 6 5 Note * Part number definitions: (1) Capacitance tolerance code: X5, X9, X0 (2) Style number: 0 or 2 (3) Packaging code Revision: 07-Mar-12 Document Number: 42073 13 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CTS1, CTS13, 749DX www.vishay.com Vishay Sprague STANDARD RATINGS/EXTENDED RATINGS - 749DX MAX. DF AT + 25 C 120 Hz (%) MAX. IMPEDANCE AT + 25 C 100 kHz () 2.0 6 5 2.4 6 5 749DX565(1)050C(2)(3) 2.8 6 2 C 749DX685(1)050C(2)(3) 3.4 6 2 C 749DX825(1)050C(2)(3) 4.1 6 2 10 C 749DX106(1)050C(2)(3) 5.0 6 2 12 C 749DX126(1)050C(2)(3) 6.0 6 2 15 C 749DX156(1)050C(2)(3) 7.5 6 2 18 C 749DX186(1)050C(2)(3) 9.0 6 2 22 D 749DX226(1)050D(2)(3) 11.0 6 1 CAPACITANCE (F) CASE CODE PART NUMBER 3.9 B 749DX395(1)050B(2)(3) 4.7 B 749DX475(1)050B(2)(3) 5.6 C 6.8 8.2 MAX. DC LEAKAGE AT + 25 C (A) 50 VDC AT + 85 C; 33 VDC AT + 125 C 63 VDC AT + 85 C; 40 VDC AT + 125 C 0.10 A 749DX104(1)063A(2)(3) 1.0 6 10 0.12 A 749DX124(1)063A(2)(3) 1.0 6 10 0.15 A 749DX154(1)063A(2)(3) 1.0 6 10 0.18 A 749DX184(1)063A(2)(3) 1.0 6 10 0.22 A 749DX224(1)063A(2)(3) 1.0 6 10 0.27 A 749DX274(1)063A(2)(3) 1.0 6 10 0.33 A 749DX334(1)063A(2)(3) 1.0 6 10 0.39 A 749DX394(1)063A(2)(3) 1.0 6 10 0.47 A 749DX474(1)063A(2)(3) 1.0 6 10 0.56 A 749DX564(1)063A(2)(3) 1.0 6 10 0.68 A 749DX684(1)063A(2)(3) 1.0 6 10 0.82 B 749DX824(1)063B(2)(3) 1.0 6 5 1.0 B 749DX105(1)063B(2)(3) 1.0 6 5 1.2 B 749DX125(1)063B(2)(3) 1.0 6 5 1.5 B 749DX155(1)063B(2)(3) 1.0 6 5 1.8 B 749DX185(1)063B(2)(3) 1.1 6 5 2.2 B 749DX225(1)063B(2)(3) 1.4 6 5 2.7 B 749DX275(1)063B(2)(3) 1.7 6 5 3.3 B 749DX335(1)063B(2)(3) 2.1 6 5 3.9 B 749DX395(1)063B(2)(3) 2.5 6 5 4.7 C 749DX475(1)063C(2)(3) 3.0 6 2 5.6 C 749DX565(1)063C(2)(3) 3.5 6 2 6.8 C 749DX685(1)063C(2)(3) 4.3 6 2 8.2 C 749DX825(1)063C(2)(3) 5.2 6 2 10 C 749DX106(1)063C(2)(3) 6.3 6 2 12 D 749DX126(1)063D(2)(3) 7.6 6 1 15 D 749DX156(1)063D(2)(3) 9.5 6 1 18 D 749DX186(1)063D(2)(3) 11.3 6 1 Note * Part number definitions: (1) Capacitance tolerance code: X5, X9, X0 (2) Style number: 0 or 2 (3) Packaging code Revision: 07-Mar-12 Document Number: 42073 14 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CTS1, CTS13, 749DX www.vishay.com Vishay Sprague TYPICAL CURVES RIPPLE VOLTAGE AT + 25 C CASE "A" CASE "B" 100 100 10 VRMS 1 = 100 V and 125 V 2 = 80 V 3 = 50 V and 63 V 4 = 35 V and 40 V 5 = 20 V and 25 V 6 = 16 V 7 = 10 V 8 = 6.3 V 1 2 3 4 5 6 7 8 5 4 3 2 50 40 30 20 10 VRMS 50 40 30 20 5 4 3 2 1 1 0.5 0.4 0.3 0.2 0.5 0.4 0.3 0.2 0.1 1 = 100 V and 125 V 2 = 80 V 3 = 50 V and 63 V 4 = 35 V and 40 V 5 = 20 V and 25 V 6 = 16 V 7 = 10 V 8 = 6.3 V 1 2 3 4 5 6 7 8 0.1 10 100 1K 10K 100K 1M 10 100 FREQUENCY IN Hz 10K 100K 1M FREQUENCY IN Hz CASE "C" CASE "D" 100 100 1 = 100 V and 125 V 2 = 80 V 3 = 50 V and 63 V 4 = 35 V and 40 V 5 = 20 V and 25 V 6 = 16 V 7 = 10 V 8 = 6.3 V 1 2 3 4 10 5 6 7 8 5 4 3 2 50 40 30 20 10 VRMS 50 40 30 20 VRMS 1K 5 4 3 2 1 1 0.5 0.4 0.3 0.2 0.5 0.4 0.3 0.2 0.1 0.1 10 100 1K 10K FREQUENCY IN Hz Revision: 07-Mar-12 100K 1M 1 = 80 V 2 = 50 V and 63 V 3 = 35 V and 40 V 4 = 20 V and 25 V 5 = 16 V 6 = 10 V 7 = 6.3 V 1 2 3 4 5 6 7 10 100 1K 10K 100K 1M FREQUENCY IN Hz Document Number: 42073 15 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CTS1, CTS13, 749DX www.vishay.com Vishay Sprague PERFORMANCE CHARACTERISTICS 6. Dissipation factor: 1. Operating temperature: - 55 C to + 85 C with rated DC voltage UR applied, + 85 C to + 125 C with linear voltage derating to category voltage UC (only for types CTS1, 749DX). The dissipation factor, when measured at 100 Hz, shall not exceed the values below: Table 3 2. Capacitance and tolerance: Capacitance measured at 100 Hz and + 25 C shall be within the specified tolerance limits of the nominal rating. Capacitance measurement shall be made by means of a polarized capacitance bridge. The polarizing voltage shall be of 2.2 V. The maximum voltage applied during measurements shall be 1.0 VRMS at 100 Hz and + 25 C. CTS1/CTS13 TEMP. CRUR 1900 749DX CRUR > 1900 CR 100 CR > 100 - 55 C 9% 11 % 8% 10 % + 25 C 6% 8% 6% 8% + 85 C 9% 11 % - - + 125 C (1) 12 % 14 % 10 % 11 % Note (1) Not applicable for CTS13 3. Reverse voltage: These capacitors are capable of withstanding peak voltage in the reverse direction equal to: 15 % of the rated DC voltage at + 25 C, 5 % of the rated DC voltage at + 85 C. 4. Surge voltage: Table 1 7. Stability at low and high temperature: Capacitance change with temperature shall not exceed the limits of the following table, leakage current and dissipation factor shall be within the limits specified in Tables 2 and 3. Table 4 PRODUCT TYPE SURGE VOLTAGE AT + 85 C SURGE VOLTAGE AT + 125 C CTS13 1.30 UR - 749DX/CTS1 1.30 UR 1.30 UC Capacitors shall withstand the surge voltage applied in series with a 1000 W resistor, at the rate of 1.5 min on, 5.5 min off, for 1000 successive test cycles at + 85 C or at + 125 C. After test, dissipation factor and leakage current shall meet the initial requirements at + 25 C (see below), capacitance change shall not exceed 10 % of initial value at + 25 C. TEMPERATURE Table 2 TEMPERATURE CTS1/CTS13/749DX + 25 C 0.01 CR x UR or 1 A whichever is greater + 85 C 0.1 CR x UR or 10 A whichever is greater + 125 C 0.125 CR x UR or 12.5 A whichever is greater - 10 % + 85 C + 12 % + 125 C (1) + 15 % Note (1) Not applicable for CTS13 8. Impedance: The impedance measured at 100 kHz and 25 C shall not exceed the following values: Table 5 5. Leakage current: Rated voltage UR shall be applied to capacitors during five minutes with a resistor of 1000 W in series with each capacitor, before making DC leakage current measurements. The leakage current shall not exceed the following limits: CTS1/CTS13/749DX - 55 C CASE CODE Z (W) (1) A 10 B 5 C 2 D 1 Note (1) Not applicable for C 0.68 F R 9. Life test: After 2000 h at + 85 C with rated DC voltage applied, or after 2000 h at + 125 C with category DC voltage applied (for types CTS1, 749DX only) capacitors shall meet the requirements in Table 6. Table 6 PRODUCT CAPACITANCE DISSIPATION DC LEAKAGE TYPE CHANGE FACTOR CURRENT CTS1 CTS13 749DX Revision: 07-Mar-12 Within 10 % of initial value at + 25 C Within initial requirement at + 25 C Within 125 % of initial requirements at + 25 C Document Number: 42073 16 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CTS1, CTS13, 749DX www.vishay.com Vishay Sprague PERFORMANCE CHARACTERISTICS (Continued) GUIDE TO APPLICATION 10. Humidity test: 1. AC ripple current: After 56 days (1350 h) at + 40 C, 90 % to 95 % of relative humidity (per IEC 68-2-3) with no voltage applied, capacitors shall meet the requirements in Table 7 below. The maximum allowable ripple determined from the formula: Table 7 where, CAPACITANCE CHANGE Within 3 % of initial value DC LEAKAGE CURRENT Within initial requirement at + 25 C - Table 2 DISSIPATION FACTOR Within initial requirement at + 25 C - Table 3 I RMS = CAPACITANCE CHANGE Within 5 % of initial value at + 25 C DC LEAKAGE CURRENT Within initial requirement at + 25 C - Table 2 DISSIPATION FACTOR Within initial requirement at + 25 C - Table 3 Typical values of charge-discharge current (per above test conditions). RATED VOLTAGE UR (V) CHARGE-DISCHARGE CURRENT (A) 6.3 13 10 20 16 32 25 50 40 80 50 100 63 126 11. Insulation test: For capacitors with insulating sleeves, a DC voltage of 100 V shall be applied for one minute between the case of the capacitor and a metal "V" block in intimate contact with the insulating sleeve. The insulating resistance measured in these conditions shall be at least 100 M. 12. Lead pull test: Leads shall withstand the following test (IEC 68-2-2): Tensile stress of 5N (cases A and B) or 10N (cases C and D) for 10 s in any direction One bend in each direction Two consecutive rotations of 180 be P = Power dissipation in W at + 25 C as given below RESR = The capacitor Equivalent Series Resistance at the specified frequency. 2. AC ripple voltage: V RMS = voltage shall be P ------------ x Z R ESR where, Z = The capacitor impedance at the specified frequency. The calculations are summarized on the graphs in table "Typical Curves Ripple Voltage at + 25 C" giving the maximum available ripple voltage as a function of frequency. However, the sum of the peak AC voltage plus the DC voltage shall not exceed the rated DC voltage at + 85 C of the capacitor. The sum of the negative peak AC voltage plus the DC voltage shall not allow a voltage reversal exceeding 15 % of the rated DC voltage. 3. AC ripple current or voltage derating factor: If these capacitors are to be operated at temperatures above + 25 C, the permissible RMS ripple current or voltage shall be calculated using the derating factors in the table below: TEMPERATURE DERATING FACTOR + 25 C 1.0 + 55 C 0.8 + 85 C 0.6 + 125 C 0.4 4. Power dissipation: Power dissipation will be affected by the heat sinking capability of the mounting surface. Non-sinusoidial ripple current may produce heating effects which differ from those shown in the following table. It is important that the equivalent IRMS value be established when calculating permissible operating levels. CASE CODE Revision: 07-Mar-12 shall P -----------R ESR The maximum allowable ripple determined from the formula: Table 8 current POWER DISSIPATION AT + 25 C (W) A 0.115 B 0.145 C 0.185 D 0.225 Document Number: 42073 17 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CTS1, CTS13, 749DX www.vishay.com Vishay Sprague TAPE AND REEL PACKAGING 1.5 max. S MEETS IEC 286-1 L1 - L2 = 1.5 mm max. S = Component spacing (cumulative tolerance on 20 units = 4 mm) b = Tape spacing c = Overall length 0.2 0.3 L1 L2 b c DIMENSIONS in millimeters REEL PACK AMMO PACK CASE SIZE REEL AND AMMO S B C MAX. B C MAX. A 5.0 0.3 63 2 78 53 2 OPTION P OPTION R OPTION G QTY PER REEL B C MAX. 68 1000 53 2 68 BULK QTY PER BOX QTY PER PACK 500 100 B 5.0 0.3 63 2 78 53 2 68 1000 53 2 68 500 75 C 10.0 0.3 63 2 78 63 2 78 500 53 2 68 250 50 D 10.0 0.3 63 2 78 63 2 78 500 53 2 68 250 25 PACKAGING CODE P R G B MARKING Capacitors shall be marked with Sprague and/or the registered trademark 2 at vendor's option; the type number; rated capacitance and tolerance (with a letter code, if different from 20 %, K = 10 %; J = 5 %) ; rated DC voltage at + 85 C and the date code of manufacture. Capacitors shall be marked on one end with a "plus" sign (+) to identify the positive terminal. Revision: 07-Mar-12 Document Number: 42073 18 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000