2SC1162
Silicon NPN Epitaxial
Application
Low frequency power amplifier complementary pair with 2SA715
Outline
1. Emitter
2. Collector
3. Base
TO-126 MOD
123
Absolute Maximum Ratings (Ta = 25°C)
Item Symbol Ratings Unit
Collector to base voltage VCBO 35 V
Collector to emitter voltage VCEO 35 V
Emitter to base voltage VEBO 5V
Collector current IC2.5 A
Collector peak current IC(peak) 3A
Collector power dissipation PC0.75 W
PC*110 W
Junction temperature Tj 150 °C
Storage temperature Tstg –55 to +150 °C
Note: 1. Value at TC = 25°C.
2SC1162
2
Electrical Characteristics (Ta = 25°C)
Item Symbol Min Typ Max Unit Test conditions
Collector to base breakdown
voltage V(BR)CBO 35 V IC = 1 mA, IE = 0
Collector to emitter breakdown
voltage V(BR)CEO 35 V IC = 10 mA, RBE =
Emitter to base breakdown
voltage V(BR)EBO 5—VI
E
= 1 mA, IC = 0
Collector cutoff current ICBO ——20µAV
CB = 35 V, IE = 0
DC current transfer ratio hFE*160 320 VCE = 2 V, IC = 0.5 A
hFE 20 VCE = 2 V, IC = 1.5 A
(pulse test)
Base to emitter voltage VBE 0.93 1.5 V VCE = 2 V, IC = 1.5 A
(pulse test)
Collector to emitter saturation
voltage VCE(sat) 0.5 1.0 V IC = 2 A, IB = 0.2 A (pulse test)
Gain bandwidth product fT 180 MHz VCE = 2 V, IC = 0.2 A
Note: 1. The 2SC1162 is grouped by hFE as follows.
BCD
60 to 120 100 to 200 160 to 320
0.8
0.6
0.4
0.2
0 50 100 150 200
Ambient temperature Ta (°C)
Collector power dissipation PC (W)
Maximum Collector Dissipation Curve
0.75
2
0.5
0.1 52050
Collector to emitter voltage VCE (V)
Collector current IC (A)
Area of Safe Operation
5
1.0
0.2
12 10
I
C(max)(DC Operation)
TC = 25°C
P
C
= 10 W
2SC1162
3
16
12
8
4
0 50 100 150 200
Case temperature TC (°C)
Collector power dissipation PC (W)
Maximum Collector Dissipation Curve 2.0
25
Collector to emitter voltage VCE (V)
Typical Output Characteristics
1.6
0.4
1340
0.8
1.2
IB = 0
TC = 25°C
2 mA
4
6
8
10
12
15
17
20
24
Collector current IC (A)
TC = 75°C
VCE = 2 V
25
–25
2.0
0.4 1.41.2
Base to emitter voltage VBE (V)
Collector Current IC (A)
Typical Transfer Characteristics
0.02
0.05
0.1
0.20 0.6 0.8 1.0
0.01
0.2
0.5
1.0
280
3.0
Collector current IC (A)
DC current transfer ratio hFE
200
240
80
0.03 0.1 1.0
0
120
160
DC Current Transfer Ratio vs.
Collector Current
TC = 75°C
VCE = 2 V
0.01
40
0.3
25
–25
3.1
φ+0.15
–0.1
8.0 ± 0.5
2.3 ± 0.3
1.1
3.7 ± 0.7
11.0 ± 0.5
15.6 ± 0.5
0.8
2.29 ± 0.5 2.29 ± 0.5 0.55 1.2
2.7 ± 0.4
120°
120°
120°
Hitachi Code
JEDEC
EIAJ
Weight
(reference value)
TO-126 Mod
0.67 g
Unit: mm
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,
copyright, trademark, or other intellectual property rights for information contained in this document.
Hitachi bears no responsibility for problems that may arise with third party’s rights, including
intellectual property rights, in connection with use of the information contained in this document.
2. Products and product specifications may be subject to change without notice. Confirm that you have
received the latest product standards or specifications before final design, purchase or use.
3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,
contact Hitachi’s sales office before using the product in an application that demands especially high
quality and reliability or where its failure or malfunction may directly threaten human life or cause risk
of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,
traffic, safety equipment or medical equipment for life support.
4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly
for maximum rating, operating supply voltage range, heat radiation characteristics, installation
conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used
beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable
failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-
safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other
consequential damage due to operation of the Hitachi product.
5. This product is not designed to be radiation resistant.
6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without
written approval from Hitachi.
7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor
products.
Hitachi, Ltd.
Semiconductor & Integrated Circuits.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109
Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.
Hitachi Asia Pte. Ltd.
16 Collyer Quay #20-00
Hitachi Tower
Singapore 049318
Tel: 535-2100
Fax: 535-1533
URL NorthAmerica : http:semiconductor.hitachi.com/
Europe : http://www.hitachi-eu.com/hel/ecg
Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm
Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm
Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm
Japan : http://www.hitachi.co.jp/Sicd/indx.htm
Hitachi Asia Ltd.
Taipei Branch Office
3F, Hung Kuo Building. No.167,
Tun-Hwa North Road, Taipei (105)
Tel: <886> (2) 2718-3666
Fax: <886> (2) 2718-8180
Hitachi Asia (Hong Kong) Ltd.
Group III (Electronic Components)
7/F., North Tower, World Finance Centre,
Harbour City, Canton Road, Tsim Sha Tsui,
Kowloon, Hong Kong
Tel: <852> (2) 735 9218
Fax: <852> (2) 730 0281
Telex: 40815 HITEC HX
Hitachi Europe Ltd.
Electronic Components Group.
Whitebrook Park
Lower Cookham Road
Maidenhead
Berkshire SL6 8YA, United Kingdom
Tel: <44> (1628) 585000
Fax: <44> (1628) 778322
Hitachi Europe GmbH
Electronic components Group
Dornacher Stra§e 3
D-85622 Feldkirchen, Munich
Germany
Tel: <49> (89) 9 9180-0
Fax: <49> (89) 9 29 30 00
Hitachi Semiconductor
(America) Inc.
179 East Tasman Drive,
San Jose,CA 95134
Tel: <1> (408) 433-1990
Fax: <1>(408) 433-0223
For further information write to: