MHQ1005P1N8CTD25 - TDK - Datasheet.Directory

INDUCTORS

MHQ0402P 0402 [01005 inch]*

MHQ0603P 0603 [0201 inch]

MHQ1005P 1005 [0402 inch]

* Dimensions Code JIS[EIA]

October 2014

Inductors for High Frequency Circuits

Multilayer Ceramic

MHQ-Pseries

(2/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

REMINDERS FOR USING THESE PRODUCTS

Before using these products, be sure to request the delivery specifications.

SAFETY REMINDERS

Please pay sufficient attention to the warnings for safe designing when using these products.

The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH

or less).

If the storage period elapses, the soldering of the terminal electrodes may deteriorate.

Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).

Before soldering, be sure to preheat components.

The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature

does not exceed 150°C.

Soldering corrections after mounting should be within the range of the conditions determined in the specifications.

If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.

When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to

the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.

Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal

design.

Carefully lay out the coil for the circuit board design of the non-magnetic shield type.

A malfunction may occur due to magnetic interference.

Use a wrist band to discharge static electricity in your body through the grounding wire.

Do not expose the products to magnets or magnetic fields.

Do not use for a purpose outside of the contents regulated in the delivery specifications.

The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications

equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement

equipment, industrial robots) under a normal operation and use condition.

The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or

quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to

society, person or property.

If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions

set forth in the each catalog, please contact us.

(1) Aerospace/Aviation equipment

(2) Transportation equipment (cars, electric trains, ships, etc.)

(3) Medical equipment

(4) Power-generation control equipment

(5) Atomic energy-related equipment

(6) Seabed equipment

(7) Transportation control equipment

(8) Public information-processing equipment

(9) Military equipment

(10) Electric heating apparatus, burning equipment

(11) Disaster prevention/crime prevention equipment

(12) Safety equipment

(13) Other applications that are not considered general-purpose

applications

When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing

protection circuit/device or providing backup circuits in your equipment.

REMINDERS

(3/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

Inductors for High Frequency Circuits

Multilayer Ceramic

FEATURES

Unique ceramic material and configuration allows for the realization of high Q characteristics that are equivalent to that of air core wound

inductors.

Multilayer method allows for a lineup with fine increments of inductance.

APPLICATION

Smart phones, tablet terminals, high frequency modules (PAs, VCOs, FEMs , etc.), Bluetooth, W-LAN, UWB, tuners

and other high frequency circuits for the mobile communication industry

PART NUMBER CONSTRUCTION

OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT

The Storage temperature range is for after the circuit board is mounted.

Product compatible with RoHS directive

Halogen-free

Compatible with lead-free solders

Overview of the MHQ-P Series

MHQ 0603 P 0N6 S T 000

Series name L×W×H Dimensions Characteristics Inductance Inductance

tolerance Packaging style Internal code

(mm) (nH)

0402 0.44×0.24×0.24 P 0N6 0.6 B ±0.1nH T Taping 000

0603 0.65×0.35×0.35 1N1 1.1 C ±0.2nH

1005 1.0×0.6×0.5 11N 11 S ±0.3nH

G±2%

H±3%

J±5%

Ty p e

Temperature range

Package quantity Individual weight

Operating

temperature

Storage

temperature

（°C）（°C）(pieces/reel) （mg）

MHQ0402P –55 to +125 –55 to +125 20000 0.11

MHQ0603P –55 to +125 –55 to +125 15000 0.2

MHQ1005P –55 to +125 –55 to +125 10000 1

RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/

Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.

(4/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

Overview of the MHQ-P Series

RECOMMENDED REFLOW PROFILE

Preheating Soldering Peak

Temp. Time Temp. Time Temp. Time

T1 T2 t1 T3 t2 T4 t3

150°C 180°C 60 to 120s 230°C 30 to 60s 250 to 260°C 10s max.

Natural

cooling

Preheating

Soldering

T3 T3

t: Time

Peak

T: Temperature

(5/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries

MHQ0402P Type

SHAPE & DIMENSIONS

RECOMMENDED LAND PATTERN

Dimensions in mm

0.11±0.030.11±0.03

0.44±0.02

0.08typ. 0.08typ.

0.24±0.02 0.24±0.02

Dimensions in mm

0.18 to 0.20

0.15 to 0.20

0.20

0.15 to 0.20

(6/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ0402P Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

・Short bar residual inductance =0.11nH

○Measurement equipment

＊ Equivalent measurement equipment may be used.

LL measuring

frequency

(MHz)

min.

Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.

(nH) Tolerance min. typ. max. typ.

0.2 ±0.1nH 500 — 500 10.0 18.7 0.2 0.02 320 MHQ0402P0N2BT000

0.2 ±0.2nH 500 —500 10.0 18.7 0.2 0.02 320 MHQ0402P0N2CT000

0.3 ±0.1nH 500 — 500 10.0 18.6 0.2 0.04 320 MHQ0402P0N3BT000

0.3 ±0.2nH 500 —500 10.0 18.6 0.2 0.04 320 MHQ0402P0N3CT000

0.4 ±0.1nH 500 — 500 10.0 18.8 0.2 0.09 320 MHQ0402P0N4BT000

0.4 ±0.2nH 500 —500 10.0 18.8 0.2 0.09 320 MHQ0402P0N4CT000

0.4 ±0.3nH 500 — 500 10.0 18.8 0.2 0.09 320 MHQ0402P0N4ST000

0.5 ±0.1nH 500 —500 10.0 18.8 0.2 0.05 320 MHQ0402P0N5BT000

0.5 ±0.2nH 500 — 500 10.0 18.8 0.2 0.05 320 MHQ0402P0N5CT000

0.5 ±0.3nH 500 —500 10.0 18.8 0.2 0.05 320 MHQ0402P0N5ST000

0.6 ±0.1nH 500 — 500 10.0 18.8 0.2 0.07 320 MHQ0402P0N6BT000

0.6 ±0.2nH 500 —500 10.0 18.8 0.2 0.07 320 MHQ0402P0N6CT000

0.6 ±0.3nH 500 — 500 10.0 18.8 0.2 0.07 320 MHQ0402P0N6ST000

0.7 ±0.1nH 500 —500 10.0 18.8 0.2 0.09 320 MHQ0402P0N7BT000

0.7 ±0.2nH 500 — 500 10.0 18.8 0.2 0.09 320 MHQ0402P0N7CT000

0.7 ±0.3nH 500 —500 10.0 18.8 0.2 0.09 320 MHQ0402P0N7ST000

0.8 ±0.1nH 500 — 500 10.0 17.8 0.2 0.07 320 MHQ0402P0N8BT000

0.8 ±0.2nH 500 —500 10.0 17.8 0.2 0.07 320 MHQ0402P0N8CT000

0.8 ±0.3nH 500 — 500 10.0 17.8 0.2 0.07 320 MHQ0402P0N8ST000

0.9 ±0.1nH 500 —500 10.0 16.8 0.2 0.11 320 MHQ0402P0N9BT000

0.9 ±0.2nH 500 — 500 10.0 16.8 0.2 0.11 320 MHQ0402P0N9CT000

0.9 ±0.3nH 500 —500 10.0 16.8 0.2 0.11 320 MHQ0402P0N9ST000

1.0 ±0.1nH 500 10 500 10.0 14.0 0.2 0.11 320 MHQ0402P1N0BT000

1.0 ±0.2nH 500 10 500 10.0 14.0 0.2 0.11 320 MHQ0402P1N0CT000

1.0 ±0.3nH 500 10 500 10.0 14.0 0.2 0.11 320 MHQ0402P1N0ST000

1.1 ±0.1nH 500 10 500 9.0 12.4 0.2 0.11 320 MHQ0402P1N1BT000

1.1 ±0.2nH 500 10 500 9.0 12.4 0.2 0.11 320 MHQ0402P1N1CT000

1.1 ±0.3nH 500 10 500 9.0 12.4 0.2 0.11 320 MHQ0402P1N1ST000

1.2 ±0.1nH 500 10 500 9.0 11.8 0.2 0.12 320 MHQ0402P1N2BT000

1.2 ±0.2nH 500 10 500 9.0 11.8 0.2 0.12 320 MHQ0402P1N2CT000

1.2 ±0.3nH 500 10 500 9.0 11.8 0.2 0.12 320 MHQ0402P1N2ST000

1.3 ±0.1nH 500 10 500 8.0 11.3 0.2 0.12 320 MHQ0402P1N3BT000

1.3 ±0.2nH 500 10 500 8.0 11.3 0.2 0.12 320 MHQ0402P1N3CT000

1.3 ±0.3nH 500 10 500 8.0 11.3 0.2 0.12 320 MHQ0402P1N3ST000

1.4 ±0.1nH 500 10 500 8.0 11.0 0.3 0.12 320 MHQ0402P1N4BT000

1.4 ±0.2nH 500 10 500 8.0 11.0 0.3 0.12 320 MHQ0402P1N4CT000

1.4 ±0.3nH 500 10 500 8.0 11.0 0.3 0.12 320 MHQ0402P1N4ST000

1.5 ±0.1nH 500 10 500 8.0 10.8 0.3 0.12 320 MHQ0402P1N5BT000

1.5 ±0.2nH 500 10 500 8.0 10.8 0.3 0.12 320 MHQ0402P1N5CT000

1.5 ±0.3nH 500 10 500 8.0 10.8 0.3 0.12 320 MHQ0402P1N5ST000

Measurement item Product No. Manufacturer

L, Q 4991A+16196D Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance 4338A Yokogawa

(7/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ0402P Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

・Short bar residual inductance =0.11nH

○Measurement equipment

＊ Equivalent measurement equipment may be used.

LL measuring

frequency

(MHz)

min.

Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.

(nH) Tolerance min. typ. max. typ.

1.6 ±0.1nH 500 10 500 8.0 11.1 0.3 0.14 320 MHQ0402P1N6BT000

1.6 ±0.2nH 500 10 500 8.0 11.1 0.3 0.14 320 MHQ0402P1N6CT000

1.6 ±0.3nH 500 10 500 8.0 11.1 0.3 0.14 320 MHQ0402P1N6ST000

1.7 ±0.1nH 500 10 500 8.0 10.7 0.3 0.15 320 MHQ0402P1N7BT000

1.7 ±0.2nH 500 10 500 8.0 10.7 0.3 0.15 320 MHQ0402P1N7CT000

1.7 ±0.3nH 500 10 500 8.0 10.7 0.3 0.15 320 MHQ0402P1N7ST000

1.8 ±0.1nH 500 10 500 8.0 10.6 0.3 0.19 250 MHQ0402P1N8BT000

1.8 ±0.2nH 500 10 500 8.0 10.6 0.3 0.19 250 MHQ0402P1N8CT000

1.8 ±0.3nH 500 10 500 8.0 10.6 0.3 0.19 250 MHQ0402P1N8ST000

1.9 ±0.1nH 500 10 500 8.0 10.6 0.4 0.25 250 MHQ0402P1N9BT000

1.9 ±0.2nH 500 10 500 8.0 10.6 0.4 0.25 250 MHQ0402P1N9CT000

1.9 ±0.3nH 500 10 500 8.0 10.6 0.4 0.25 250 MHQ0402P1N9ST000

2.0 ±0.1nH 500 10 500 8.0 10.5 0.4 0.29 250 MHQ0402P2N0BT000

2.0 ±0.2nH 500 10 500 8.0 10.5 0.4 0.29 250 MHQ0402P2N0CT000

2.0 ±0.3nH 500 10 500 8.0 10.5 0.4 0.29 250 MHQ0402P2N0ST000

2.1 ±0.1nH 500 10 500 6.0 8.9 0.4 0.20 250 MHQ0402P2N1BT000

2.1 ±0.2nH 500 10 500 6.0 8.9 0.4 0.20 250 MHQ0402P2N1CT000

2.1 ±0.3nH 500 10 500 6.0 8.9 0.4 0.20 250 MHQ0402P2N1ST000

2.2 ±0.1nH 500 10 500 6.0 8.8 0.4 0.20 250 MHQ0402P2N2BT000

2.2 ±0.2nH 500 10 500 6.0 8.8 0.4 0.20 250 MHQ0402P2N2CT000

2.2 ±0.3nH 500 10 500 6.0 8.8 0.4 0.20 250 MHQ0402P2N2ST000

2.3 ±0.1nH 500 10 500 6.0 8.4 0.4 0.17 200 MHQ0402P2N3BT000

2.3 ±0.2nH 500 10 500 6.0 8.4 0.4 0.17 200 MHQ0402P2N3CT000

2.3 ±0.3nH 500 10 500 6.0 8.4 0.4 0.17 200 MHQ0402P2N3ST000

2.4 ±0.1nH 500 10 500 6.0 8.6 0.4 0.20 200 MHQ0402P2N4BT000

2.4 ±0.2nH 500 10 500 6.0 8.6 0.4 0.20 200 MHQ0402P2N4CT000

2.4 ±0.3nH 500 10 500 6.0 8.6 0.4 0.20 200 MHQ0402P2N4ST000

2.5 ±0.1nH 500 10 500 6.0 8.3 0.4 0.20 200 MHQ0402P2N5BT000

2.5 ±0.2nH 500 10 500 6.0 8.3 0.4 0.20 200 MHQ0402P2N5CT000

2.5 ±0.3nH 500 10 500 6.0 8.3 0.4 0.20 200 MHQ0402P2N5ST000

2.6 ±0.1nH 500 10 500 6.0 8.6 0.4 0.21 200 MHQ0402P2N6BT000

2.6 ±0.2nH 500 10 500 6.0 8.6 0.4 0.21 200 MHQ0402P2N6CT000

2.6 ±0.3nH 500 10 500 6.0 8.6 0.4 0.21 200 MHQ0402P2N6ST000

2.7 ±0.1nH 500 10 500 6.0 8.0 0.4 0.21 200 MHQ0402P2N7BT000

2.7 ±0.2nH 500 10 500 6.0 8.0 0.4 0.21 200 MHQ0402P2N7CT000

2.7 ±0.3nH 500 10 500 6.0 8.0 0.4 0.21 200 MHQ0402P2N7ST000

2.8 ±0.1nH 500 10 500 6.0 8.0 0.4 0.19 200 MHQ0402P2N8BT000

2.8 ±0.2nH 500 10 500 6.0 8.0 0.4 0.19 200 MHQ0402P2N8CT000

2.8 ±0.3nH 500 10 500 6.0 8.0 0.4 0.19 200 MHQ0402P2N8ST000

2.9 ±0.1nH 500 10 500 6.0 8.3 0.4 0.22 200 MHQ0402P2N9BT000

Measurement item Product No. Manufacturer

L, Q 4991A+16196D Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance 4338A Yokogawa

(8/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ0402P Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

・Short bar residual inductance =0.11nH

○Measurement equipment

＊ Equivalent measurement equipment may be used.

LL measuring

frequency

(MHz)

min.

Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.

(nH) Tolerance min. typ. max. typ.

2.9 ±0.2nH 500 10 500 6.0 8.3 0.4 0.22 200 MHQ0402P2N9CT000

2.9 ±0.3nH 500 10 500 6.0 8.3 0.4 0.22 200 MHQ0402P2N9ST000

3.0 ±0.1nH 500 10 500 6.0 8.2 0.5 0.26 200 MHQ0402P3N0BT000

3.0 ±0.2nH 500 10 500 6.0 8.2 0.5 0.26 200 MHQ0402P3N0CT000

3.0 ±0.3nH 500 10 500 6.0 8.2 0.5 0.26 200 MHQ0402P3N0ST000

3.1 ±0.1nH 500 10 500 5.0 7.9 0.5 0.26 200 MHQ0402P3N1BT000

3.1 ±0.2nH 500 10 500 5.0 7.9 0.5 0.26 200 MHQ0402P3N1CT000

3.1 ±0.3nH 500 10 500 5.0 7.9 0.5 0.26 200 MHQ0402P3N1ST000

3.2 ±0.1nH 500 10 500 5.0 7.0 0.5 0.24 200 MHQ0402P3N2BT000

3.2 ±0.2nH 500 10 500 5.0 7.0 0.5 0.24 200 MHQ0402P3N2CT000

3.2 ±0.3nH 500 10 500 5.0 7.0 0.5 0.24 200 MHQ0402P3N2ST000

3.3 ±0.1nH 500 10 500 5.0 7.1 0.5 0.26 200 MHQ0402P3N3BT000

3.3 ±0.2nH 500 10 500 5.0 7.1 0.5 0.26 200 MHQ0402P3N3CT000

3.3 ±0.3nH 500 10 500 5.0 7.1 0.5 0.26 200 MHQ0402P3N3ST000

3.4 ±0.1nH 500 10 500 5.0 7.2 0.5 0.25 200 MHQ0402P3N4BT000

3.4 ±0.2nH 500 10 500 5.0 7.2 0.5 0.25 200 MHQ0402P3N4CT000

3.4 ±0.3nH 500 10 500 5.0 7.2 0.5 0.25 200 MHQ0402P3N4ST000

3.5 ±0.1nH 500 10 500 5.0 7.2 0.5 0.26 200 MHQ0402P3N5BT000

3.5 ±0.2nH 500 10 500 5.0 7.2 0.5 0.26 200 MHQ0402P3N5CT000

3.5 ±0.3nH 500 10 500 5.0 7.2 0.5 0.26 200 MHQ0402P3N5ST000

3.6 ±0.1nH 500 10 500 5.0 7.2 0.5 0.26 200 MHQ0402P3N6BT000

3.6 ±0.2nH 500 10 500 5.0 7.2 0.5 0.26 200 MHQ0402P3N6CT000

3.6 ±0.3nH 500 10 500 5.0 7.2 0.5 0.26 200 MHQ0402P3N6ST000

3.7 ±0.1nH 500 10 500 5.0 6.7 0.5 0.25 200 MHQ0402P3N7BT000

3.7 ±0.2nH 500 10 500 5.0 6.7 0.5 0.25 200 MHQ0402P3N7CT000

3.7 ±0.3nH 500 10 500 5.0 6.7 0.5 0.25 200 MHQ0402P3N7ST000

3.8 ±0.1nH 500 10 500 5.0 6.6 0.5 0.25 200 MHQ0402P3N8BT000

3.8 ±0.2nH 500 10 500 5.0 6.6 0.5 0.25 200 MHQ0402P3N8CT000

3.8 ±0.3nH 500 10 500 5.0 6.6 0.5 0.25 200 MHQ0402P3N8ST000

3.9 ±0.1nH 500 10 500 5.0 6.8 0.5 0.29 200 MHQ0402P3N9BT000

3.9 ±0.2nH 500 10 500 5.0 6.8 0.5 0.29 200 MHQ0402P3N9CT000

3.9 ±0.3nH 500 10 500 5.0 6.8 0.5 0.29 200 MHQ0402P3N9ST000

4.0 ±0.1nH 500 10 500 5.0 6.7 0.5 0.26 200 MHQ0402P4N0BT000

4.0 ±0.2nH 500 10 500 5.0 6.7 0.5 0.26 200 MHQ0402P4N0CT000

4.0 ±0.3nH 500 10 500 5.0 6.7 0.5 0.26 200 MHQ0402P4N0ST000

4.1 ±0.1nH 500 10 500 5.0 6.6 0.5 0.27 200 MHQ0402P4N1BT000

4.1 ±0.2nH 500 10 500 5.0 6.6 0.5 0.27 200 MHQ0402P4N1CT000

4.1 ±0.3nH 500 10 500 5.0 6.6 0.5 0.27 200 MHQ0402P4N1ST000

4.2 ±0.1nH 500 10 500 5.0 6.7 0.5 0.29 200 MHQ0402P4N2BT000

4.2 ±0.2nH 500 10 500 5.0 6.7 0.5 0.29 200 MHQ0402P4N2CT000

Measurement item Product No. Manufacturer

L, Q 4991A+16196D Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance 4338A Yokogawa

(9/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ0402P Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

・Short bar residual inductance =0.11nH

○Measurement equipment

＊ Equivalent measurement equipment may be used.

LL measuring

frequency

(MHz)

min.

Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.

(nH) Tolerance min. typ. max. typ.

4.2 ±0.3nH 500 10 500 5.0 6.7 0.5 0.29 200 MHQ0402P4N2ST000

4.3 ±3% 500 10 500 5.0 7.1 0.7 0.49 200 MHQ0402P4N3HT000

4.3 ±5% 500 10 500 5.0 7.1 0.7 0.49 200 MHQ0402P4N3JT000

4.4 ±3% 500 10 500 5.0 6.9 0.7 0.50 200 MHQ0402P4N4HT000

4.4 ±5% 500 10 500 5.0 6.9 0.7 0.50 200 MHQ0402P4N4JT000

4.5 ±3% 500 10 500 5.0 6.7 0.7 0.51 200 MHQ0402P4N5HT000

4.5 ±5% 500 10 500 5.0 6.7 0.7 0.51 200 MHQ0402P4N5JT000

4.6 ±3% 500 10 500 5.0 6.8 0.7 0.50 200 MHQ0402P4N6HT000

4.6 ±5% 500 10 500 5.0 6.8 0.7 0.50 200 MHQ0402P4N6JT000

4.7 ±3% 500 10 500 5.0 6.6 0.7 0.49 200 MHQ0402P4N7HT000

4.7 ±5% 500 10 500 5.0 6.6 0.7 0.49 200 MHQ0402P4N7JT000

4.8 ±3% 500 10 500 5.0 6.5 0.7 0.52 200 MHQ0402P4N8HT000

4.8 ±5% 500 10 500 5.0 6.5 0.7 0.52 200 MHQ0402P4N8JT000

4.9 ±3% 500 10 500 5.0 6.5 0.8 0.53 200 MHQ0402P4N9HT000

4.9 ±5% 500 10 500 5.0 6.5 0.8 0.53 200 MHQ0402P4N9JT000

5.0 ±3% 500 10 500 4.0 6.4 0.8 0.55 200 MHQ0402P5N0HT000

5.0 ±5% 500 10 500 4.0 6.4 0.8 0.55 200 MHQ0402P5N0JT000

5.1 ±3% 500 10 500 4.0 6.2 1.0 0.63 200 MHQ0402P5N1HT000

5.1 ±5% 500 10 500 4.0 6.2 1.0 0.63 200 MHQ0402P5N1JT000

5.6 ±3% 500 10 500 4.0 6.0 1.0 0.58 200 MHQ0402P5N6HT000

5.6 ±5% 500 10 500 4.0 6.0 1.0 0.58 200 MHQ0402P5N6JT000

6.2 ±3% 500 10 500 4.0 5.6 1.0 0.60 200 MHQ0402P6N2HT000

6.2 ±5% 500 10 500 4.0 5.6 1.0 0.60 200 MHQ0402P6N2JT000

6.8 ±3% 500 10 500 4.0 5.2 1.0 0.61 200 MHQ0402P6N8HT000

6.8 ±5% 500 10 500 4.0 5.2 1.0 0.61 200 MHQ0402P6N8JT000

7.5 ±3% 500 10 500 3.0 4.4 1.2 0.74 200 MHQ0402P7N5HT000

7.5 ±5% 500 10 500 3.0 4.4 1.2 0.74 200 MHQ0402P7N5JT000

8.2 ±3% 500 10 500 3.0 4.7 1.2 0.69 180 MHQ0402P8N2HT000

8.2 ±5% 500 10 500 3.0 4.7 1.2 0.69 180 MHQ0402P8N2JT000

9.1 ±3% 500 10 500 3.0 4.4 1.5 0.78 180 MHQ0402P9N1HT000

9.1 ±5% 500 10 500 3.0 4.4 1.5 0.78 180 MHQ0402P9N1JT000

10.0 ±3% 500 10 500 3.0 4.2 1.5 0.77 160 MHQ0402P10NHT000

10.0 ±5% 500 10 500 3.0 4.2 1.5 0.77 160 MHQ0402P10NJT000

11.0 ±3% 500 10 500 3.0 3.8 2.0 0.78 160 MHQ0402P11NHT000

11.0 ±5% 500 10 500 3.0 3.8 2.0 0.78 160 MHQ0402P11NJT000

12.0 ±3% 500 10 500 3.0 4.2 2.0 0.78 160 MHQ0402P12NHT000

12.0 ±5% 500 10 500 3.0 4.2 2.0 0.78 160 MHQ0402P12NJT000

13.0 ±3% 500 10 500 3.0 4.1 2.0 0.88 160 MHQ0402P13NHT000

13.0 ±5% 500 10 500 3.0 4.1 2.0 0.88 160 MHQ0402P13NJT000

15.0 ±3% 500 10 500 2.0 3.4 2.0 0.88 150 MHQ0402P15NHT000

Measurement item Product No. Manufacturer

L, Q 4991A+16196D Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance 4338A Yokogawa

(10/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ0402P Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

・Short bar residual inductance =0.11nH

○Measurement equipment

＊ Equivalent measurement equipment may be used.

LL measuring

frequency

(MHz)

min.

Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.

(nH) Tolerance min. typ. max. typ.

15.0 ±5% 500 10 500 2.0 3.4 2.0 0.88 150 MHQ0402P15NJT000

16.0 ±3% 500 10 500 2.0 3.4 2.5 1.30 140 MHQ0402P16NHT000

16.0 ±5% 500 10 500 2.0 3.4 2.5 1.30 140 MHQ0402P16NJT000

18.0 ±3% 500 10 500 2.0 3.0 2.5 1.45 140 MHQ0402P18NHT000

18.0 ±5% 500 10 500 2.0 3.0 2.5 1.45 140 MHQ0402P18NJT000

20.0 ±3% 500 10 500 2.0 2.9 2.5 1.81 140 MHQ0402P20NHT000

20.0 ±5% 500 10 500 2.0 2.9 2.5 1.81 140 MHQ0402P20NJT000

22.0 ±3% 500 10 500 2.0 2.9 3.0 1.89 140 MHQ0402P22NHT000

22.0 ±5% 500 10 500 2.0 2.9 3.0 1.89 140 MHQ0402P22NJT000

24.0 ±3% 500 10 500 2.0 2.9 3.0 1.96 130 MHQ0402P24NHT000

24.0 ±5% 500 10 500 2.0 2.9 3.0 1.96 130 MHQ0402P24NJT000

27.0 ±3% 500 10 500 1.5 2.6 3.0 2.03 130 MHQ0402P27NHT000

27.0 ±5% 500 10 500 1.5 2.6 3.0 2.03 130 MHQ0402P27NJT000

30.0 ±3% 500 10 500 1.5 2.5 3.5 2.23 130 MHQ0402P30NHT000

30.0 ±5% 500 10 500 1.5 2.5 3.5 2.23 130 MHQ0402P30NJT000

33.0 ±3% 300 7300 1.5 2.2 3.5 2.48 130 MHQ0402P33NHT000

33.0 ±5% 300 7 300 1.5 2.2 3.5 2.48 130 MHQ0402P33NJT000

Measurement item Product No. Manufacturer

L, Q 4991A+16196D Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance 4338A Yokogawa

(11/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ0402P Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

0.2 0.2 0.2 0.2 0.2 14.4 20 30 32 35 MHQ0402P0N2BT000

0.2 0.2 0.2 0.2 0.2 14.4 20 30 32 35 MHQ0402P0N2CT000

0.3 0.3 0.3 0.3 0.3 14.1 19 30 33 36 MHQ0402P0N3BT000

0.3 0.3 0.3 0.3 0.3 14.1 19 30 33 36 MHQ0402P0N3CT000

0.4 0.4 0.4 0.4 0.4 9.6 13 22 23 26 MHQ0402P0N4BT000

0.4 0.4 0.4 0.4 0.4 9.6 13 22 23 26 MHQ0402P0N4CT000

0.4 0.4 0.4 0.4 0.4 9.6 13 22 23 26 MHQ0402P0N4ST000

0.5 0.5 0.5 0.5 0.5 12 16 25 27 30 MHQ0402P0N5BT000

0.5 0.5 0.5 0.5 0.5 12 16 25 27 30 MHQ0402P0N5CT000

0.5 0.5 0.5 0.5 0.5 12 16 25 27 30 MHQ0402P0N5ST000

0.6 0.6 0.6 0.6 0.6 13 17 27 29 33 MHQ0402P0N6BT000

0.6 0.6 0.6 0.6 0.6 13 17 27 29 33 MHQ0402P0N6CT000

0.6 0.6 0.6 0.6 0.6 13 17 27 29 33 MHQ0402P0N6ST000

0.7 0.7 0.7 0.7 0.7 12 16 25 27 30 MHQ0402P0N7BT000

0.7 0.7 0.7 0.7 0.7 12 16 25 27 30 MHQ0402P0N7CT000

0.7 0.7 0.7 0.7 0.7 12 16 25 27 30 MHQ0402P0N7ST000

0.8 0.8 0.8 0.8 0.8 12 17 27 28 32 MHQ0402P0N8BT000

0.8 0.8 0.8 0.8 0.8 12 17 27 28 32 MHQ0402P0N8CT000

0.8 0.8 0.8 0.8 0.8 12 17 27 28 32 MHQ0402P0N8ST000

0.9 0.9 0.9 0.9 0.9 12 15 24 26 29 MHQ0402P0N9BT000

0.9 0.9 0.9 0.9 0.9 12 15 24 26 29 MHQ0402P0N9CT000

0.9 0.9 0.9 0.9 0.9 12 15 24 26 29 MHQ0402P0N9ST000

1.0 1.0 1.0 1.0 1.0 13 17 27 29 32 MHQ0402P1N0BT000

1.0 1.0 1.0 1.0 1.0 13 17 27 29 32 MHQ0402P1N0CT000

1.0 1.0 1.0 1.0 1.0 13 17 27 29 32 MHQ0402P1N0ST000

1.1 1.1 1.1 1.1 1.1 13 16 25 27 30 MHQ0402P1N1BT000

1.1 1.1 1.1 1.1 1.1 13 16 25 27 30 MHQ0402P1N1CT000

1.1 1.1 1.1 1.1 1.1 13 16 25 27 30 MHQ0402P1N1ST000

1.2 1.2 1.2 1.2 1.2 15 19 30 32 36 MHQ0402P1N2BT000

1.2 1.2 1.2 1.2 1.2 15 19 30 32 36 MHQ0402P1N2CT000

1.2 1.2 1.2 1.2 1.2 15 19 30 32 36 MHQ0402P1N2ST000

1.3 1.3 1.3 1.3 1.3 15 19 29 32 35 MHQ0402P1N3BT000

1.3 1.3 1.3 1.3 1.3 15 19 29 32 35 MHQ0402P1N3CT000

1.3 1.3 1.3 1.3 1.3 15 19 29 32 35 MHQ0402P1N3ST000

1.4 1.4 1.4 1.4 1.4 14 18 28 30 34 MHQ0402P1N4BT000

1.4 1.4 1.4 1.4 1.4 14 18 28 30 34 MHQ0402P1N4CT000

1.4 1.4 1.4 1.4 1.4 14 18 28 30 34 MHQ0402P1N4ST000

1.5 1.5 1.5 1.5 1.5 14 18 29 31 34 MHQ0402P1N5BT000

1.5 1.5 1.5 1.5 1.5 14 18 29 31 34 MHQ0402P1N5CT000

1.5 1.5 1.5 1.5 1.5 14 18 29 31 34 MHQ0402P1N5ST000

1.6 1.6 1.6 1.6 1.6 14 18 29 32 36 MHQ0402P1N6BT000

1.6 1.6 1.6 1.6 1.6 14 18 29 32 36 MHQ0402P1N6CT000

1.6 1.6 1.6 1.6 1.6 14 18 29 32 36 MHQ0402P1N6ST000

1.7 1.7 1.7 1.7 1.7 14 18 29 31 34 MHQ0402P1N7BT000

Measurement item Product No. Manufacturer

L, Q 4991A+16196D Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance 4338A Yokogawa

(12/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ0402P Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

1.7 1.7 1.7 1.7 1.7 14 18 29 31 34 MHQ0402P1N7CT000

1.7 1.7 1.7 1.7 1.7 14 18 29 31 34 MHQ0402P1N7ST000

1.8 1.8 1.8 1.8 1.8 14 18 27 30 33 MHQ0402P1N8BT000

1.8 1.8 1.8 1.8 1.8 14 18 27 30 33 MHQ0402P1N8CT000

1.8 1.8 1.8 1.8 1.8 14 18 27 30 33 MHQ0402P1N8ST000

1.9 1.9 1.9 1.9 1.9 12 16 26 28 31 MHQ0402P1N9BT000

1.9 1.9 1.9 1.9 1.9 12 16 26 28 31 MHQ0402P1N9CT000

1.9 1.9 1.9 1.9 1.9 12 16 26 28 31 MHQ0402P1N9ST000

2.0 2.0 2.0 2.0 2.0 12 16 26 28 31 MHQ0402P2N0BT000

2.0 2.0 2.0 2.0 2.0 12 16 26 28 31 MHQ0402P2N0CT000

2.0 2.0 2.0 2.0 2.0 12 16 26 28 31 MHQ0402P2N0ST000

2.1 2.1 2.1 2.1 2.1 12 16 26 28 31 MHQ0402P2N1BT000

2.1 2.1 2.1 2.1 2.1 12 16 26 28 31 MHQ0402P2N1CT000

2.1 2.1 2.1 2.1 2.1 12 16 26 28 31 MHQ0402P2N1ST000

2.2 2.2 2.2 2.2 2.2 13 17 27 30 33 MHQ0402P2N2BT000

2.2 2.2 2.2 2.2 2.2 13 17 27 30 33 MHQ0402P2N2CT000

2.2 2.2 2.2 2.2 2.2 13 17 27 30 33 MHQ0402P2N2ST000

2.3 2.3 2.3 2.3 2.3 14 18 29 31 34 MHQ0402P2N3BT000

2.3 2.3 2.3 2.3 2.3 14 18 29 31 34 MHQ0402P2N3CT000

2.3 2.3 2.3 2.3 2.3 14 18 29 31 34 MHQ0402P2N3ST000

2.4 2.4 2.4 2.4 2.4 14 18 29 31 33 MHQ0402P2N4BT000

2.4 2.4 2.4 2.4 2.4 14 18 29 31 33 MHQ0402P2N4CT000

2.4 2.4 2.4 2.4 2.4 14 18 29 31 33 MHQ0402P2N4ST000

2.5 2.5 2.5 2.5 2.5 14 18 28 31 33 MHQ0402P2N5BT000

2.5 2.5 2.5 2.5 2.5 14 18 28 31 33 MHQ0402P2N5CT000

2.5 2.5 2.5 2.5 2.5 14 18 28 31 33 MHQ0402P2N5ST000

2.6 2.6 2.6 2.6 2.6 14 17 28 30 33 MHQ0402P2N6BT000

2.6 2.6 2.6 2.6 2.6 14 17 28 30 33 MHQ0402P2N6CT000

2.6 2.6 2.6 2.6 2.6 14 17 28 30 33 MHQ0402P2N6ST000

2.7 2.7 2.7 2.7 2.8 13 17 26 28 31 MHQ0402P2N7BT000

2.7 2.7 2.7 2.7 2.8 13 17 26 28 31 MHQ0402P2N7CT000

2.7 2.7 2.7 2.7 2.8 13 17 26 28 31 MHQ0402P2N7ST000

2.8 2.8 2.8 2.8 2.9 14 18 28 30 32 MHQ0402P2N8BT000

2.8 2.8 2.8 2.8 2.9 14 18 28 30 32 MHQ0402P2N8CT000

2.8 2.8 2.8 2.8 2.9 14 18 28 30 32 MHQ0402P2N8ST000

2.9 2.9 2.9 2.9 2.9 13 17 27 29 31 MHQ0402P2N9BT000

2.9 2.9 2.9 2.9 2.9 13 17 27 29 31 MHQ0402P2N9CT000

2.9 2.9 2.9 2.9 2.9 13 17 27 29 31 MHQ0402P2N9ST000

3.0 3.0 3.0 3.0 3.0 13 17 27 29 31 MHQ0402P3N0BT000

3.0 3.0 3.0 3.0 3.0 13 17 27 29 31 MHQ0402P3N0CT000

3.0 3.0 3.0 3.0 3.0 13 17 27 29 31 MHQ0402P3N0ST000

3.1 3.1 3.1 3.1 3.1 13 17 27 29 31 MHQ0402P3N1BT000

3.1 3.1 3.1 3.1 3.1 13 17 27 29 31 MHQ0402P3N1CT000

3.1 3.1 3.1 3.1 3.1 13 17 27 29 31 MHQ0402P3N1ST000

Measurement item Product No. Manufacturer

L, Q 4991A+16196D Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance 4338A Yokogawa

(13/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ0402P Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

3.2 3.2 3.2 3.3 3.3 14 18 28 30 32 MHQ0402P3N2BT000

3.2 3.2 3.2 3.3 3.3 14 18 28 30 32 MHQ0402P3N2CT000

3.2 3.2 3.2 3.3 3.3 14 18 28 30 32 MHQ0402P3N2ST000

3.3 3.3 3.3 3.3 3.4 13 17 27 29 32 MHQ0402P3N3BT000

3.3 3.3 3.3 3.3 3.4 13 17 27 29 32 MHQ0402P3N3CT000

3.3 3.3 3.3 3.3 3.4 13 17 27 29 32 MHQ0402P3N3ST000

3.4 3.4 3.4 3.5 3.6 13 17 26 28 30 MHQ0402P3N4BT000

3.4 3.4 3.4 3.5 3.6 13 17 26 28 30 MHQ0402P3N4CT000

3.4 3.4 3.4 3.5 3.6 13 17 26 28 30 MHQ0402P3N4ST000

3.5 3.5 3.5 3.6 3.7 15 18 28 30 32 MHQ0402P3N5BT000

3.5 3.5 3.5 3.6 3.7 15 18 28 30 32 MHQ0402P3N5CT000

3.5 3.5 3.5 3.6 3.7 15 18 28 30 32 MHQ0402P3N5ST000

3.6 3.6 3.6 3.7 3.8 14 17 27 29 31 MHQ0402P3N6BT000

3.6 3.6 3.6 3.7 3.8 14 17 27 29 31 MHQ0402P3N6CT000

3.6 3.6 3.6 3.7 3.8 14 17 27 29 31 MHQ0402P3N6ST000

3.7 3.7 3.8 3.8 3.9 14 18 27 29 31 MHQ0402P3N7BT000

3.7 3.7 3.8 3.8 3.9 14 18 27 29 31 MHQ0402P3N7CT000

3.7 3.7 3.8 3.8 3.9 14 18 27 29 31 MHQ0402P3N7ST000

3.8 3.8 3.9 3.9 4.0 14 18 28 30 32 MHQ0402P3N8BT000

3.8 3.8 3.9 3.9 4.0 14 18 28 30 32 MHQ0402P3N8CT000

3.8 3.8 3.9 3.9 4.0 14 18 28 30 32 MHQ0402P3N8ST000

3.9 3.9 4.0 4.1 4.3 14 18 27 29 31 MHQ0402P3N9BT000

3.9 3.9 4.0 4.1 4.3 14 18 27 29 31 MHQ0402P3N9CT000

3.9 3.9 4.0 4.1 4.3 14 18 27 29 31 MHQ0402P3N9ST000

4.0 4.0 4.1 4.1 4.2 13 16 25 27 29 MHQ0402P4N0BT000

4.0 4.0 4.1 4.1 4.2 13 16 25 27 29 MHQ0402P4N0CT000

4.0 4.0 4.1 4.1 4.2 13 16 25 27 29 MHQ0402P4N0ST000

4.1 4.1 4.2 4.2 4.3 13 16 25 27 29 MHQ0402P4N1BT000

4.1 4.1 4.2 4.2 4.3 13 16 25 27 29 MHQ0402P4N1CT000

4.1 4.1 4.2 4.2 4.3 13 16 25 27 29 MHQ0402P4N1ST000

4.2 4.2 4.2 4.3 4.4 14 18 28 30 32 MHQ0402P4N2BT000

4.2 4.2 4.2 4.3 4.4 14 18 28 30 32 MHQ0402P4N2CT000

4.2 4.2 4.2 4.3 4.4 14 18 28 30 32 MHQ0402P4N2ST000

4.3 4.3 4.3 4.4 4.5 14 18 28 30 32 MHQ0402P4N3HT000

4.3 4.3 4.3 4.4 4.5 14 18 28 30 32 MHQ0402P4N3JT000

4.4 4.4 4.4 4.5 4.6 14 18 28 30 33 MHQ0402P4N4HT000

4.4 4.4 4.4 4.5 4.6 14 18 28 30 33 MHQ0402P4N4JT000

4.5 4.5 4.5 4.6 4.7 14 18 28 30 32 MHQ0402P4N5HT000

4.5 4.5 4.5 4.6 4.7 14 18 28 30 32 MHQ0402P4N5JT000

4.6 4.6 4.6 4.7 4.8 14 18 28 30 33 MHQ0402P4N6HT000

4.6 4.6 4.6 4.7 4.8 14 18 28 30 33 MHQ0402P4N6JT000

4.7 4.7 4.7 4.8 4.9 13 17 27 29 31 MHQ0402P4N7HT000

4.7 4.7 4.7 4.8 4.9 13 17 27 29 31 MHQ0402P4N7JT000

Measurement item Product No. Manufacturer

L, Q 4991A+16196D Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance 4338A Yokogawa

(14/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ0402P Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

4.8 4.8 4.9 4.9 5.1 14 18 28 30 32 MHQ0402P4N8HT000

4.8 4.8 4.9 4.9 5.1 14 18 28 30 32 MHQ0402P4N8JT000

4.9 4.9 5.0 5.0 5.1 14 18 27 29 32 MHQ0402P4N9HT000

4.9 4.9 5.0 5.0 5.1 14 18 27 29 32 MHQ0402P4N9JT000

5.0 5.0 5.1 5.1 5.3 14 17 26 28 30 MHQ0402P5N0HT000

5.0 5.0 5.1 5.1 5.3 14 17 26 28 30 MHQ0402P5N0JT000

5.1 5.1 5.2 5.3 5.4 14 18 28 31 33 MHQ0402P5N1HT000

5.1 5.1 5.2 5.3 5.4 14 18 28 31 33 MHQ0402P5N1JT000

5.6 5.6 5.7 5.8 5.9 14 18 28 30 32 MHQ0402P5N6HT000

5.6 5.6 5.7 5.8 5.9 14 18 28 30 32 MHQ0402P5N6JT000

6.2 6.2 6.4 6.5 6.7 15 19 29 31 33 MHQ0402P6N2HT000

6.2 6.2 6.4 6.5 6.7 15 19 29 31 33 MHQ0402P6N2JT000

6.8 6.8 7.1 7.2 7.5 15 19 30 31 33 MHQ0402P6N8HT000

6.8 6.8 7.1 7.2 7.5 15 19 30 31 33 MHQ0402P6N8JT000

7.5 7.5 8.1 8.4 9.0 14 18 25 26 26 MHQ0402P7N5HT000

7.5 7.5 8.1 8.4 9.0 14 18 25 26 26 MHQ0402P7N5JT000

8.2 8.2 8.7 9.0 9.5 14 18 27 28 28 MHQ0402P8N2HT000

8.2 8.2 8.7 9.0 9.5 14 18 27 28 28 MHQ0402P8N2JT000

9.1 9.1 10.0 10.4 11.3 14 17 23 24 24 MHQ0402P9N1HT000

9.1 9.1 10.0 10.4 11.3 14 17 23 24 24 MHQ0402P9N1JT000

10.0 10.0 10.9 11.2 12.1 15 18 26 26 26 MHQ0402P10NHT000

10.0 10.0 10.9 11.2 12.1 15 18 26 26 26 MHQ0402P10NJT000

11.0 11.1 12.6 13.3 14.9 15 18 25 26 25 MHQ0402P11NHT000

11.0 11.1 12.6 13.3 14.9 15 18 25 26 25 MHQ0402P11NJT000

12.0 12.0 13.1 13.6 14.8 13 16 22 23 23 MHQ0402P12NHT000

12.0 12.0 13.1 13.6 14.8 13 16 22 23 23 MHQ0402P12NJT000

13.0 13.0 14.4 15.1 16.6 13 16 21 21 21 MHQ0402P13NHT000

13.0 13.0 14.4 15.1 16.6 13 16 21 21 21 MHQ0402P13NJT000

15.0 15.1 16.7 17.5 19.4 13 16 22 22 21 MHQ0402P15NHT000

15.0 15.1 16.7 17.5 19.4 13 16 22 22 21 MHQ0402P15NJT000

16.0 16.1 18.3 19.3 21.8 13 16 21 21 20 MHQ0402P16NHT000

16.0 16.1 18.3 19.3 21.8 13 16 21 21 20 MHQ0402P16NJT000

18.0 18.2 21.3 22.7 26.6 13 16 19 18 17 MHQ0402P18NHT000

18.0 18.2 21.3 22.7 26.6 13 16 19 18 17 MHQ0402P18NJT000

20.0 20.4 25.3 27.8 35.1 13 16 20 19 17 MHQ0402P20NHT000

20.0 20.4 25.3 27.8 35.1 13 16 20 19 17 MHQ0402P20NJT000

22.0 22.4 27.7 30.3 38.0 14 16 19 18 16 MHQ0402P22NHT000

22.0 22.4 27.7 30.3 38.0 14 16 19 18 16 MHQ0402P22NJT000

24.0 24.4 30.7 33.9 43.4 14 16 19 18 15 MHQ0402P24NHT000

24.0 24.4 30.7 33.9 43.4 14 16 19 18 15 MHQ0402P24NJT000

27.0 27.6 35.9 40.5 — 14 16 17 15 — MHQ0402P27NHT000

27.0 27.6 35.9 40.5 —14 16 17 15 —MHQ0402P27NJT000

30.0 30.8 41.1 46.9 — 13 16 17 15 — MHQ0402P30NHT000

30.0 30.8 41.1 46.9 —13 16 17 15 —MHQ0402P30NJT000

33.0 34.3 52.5 65.0 — 13 15 14 12 — MHQ0402P33NHT000

33.0 34.3 52.5 65.0 —13 15 14 12 —MHQ0402P33NJT000

Measurement item Product No. Manufacturer

L, Q 4991A+16196D Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance 4338A Yokogawa

(15/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ0402PType

ELECTRICAL CHARACTERISTICS

L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)

○Measurement equipment

＊ Equivalent measurement equipment may be used.

10 100 1000 10000

1000

100

Frequency (MHz)

Inductance (nH)

33N

27N

22N

18N

15N

12N

10N

8N2

6N8

5N6

4N7

3N9

3N3

2N7

2N2

1N8

1N5

1N2

1N0

Product No. Manufacturer

E4991A+16196D Agilent Technologies

(16/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ0402P Type

ELECTRICAL CHARACTERISTICS

Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)

○Measurement equipment

＊ Equivalent measurement equipment may be used.

1 10 100 1000 10000

Frequency (MHz)

6N8

4N7

1N0

3N3

33N

27N

22N

18N

15N

12N

10N

8N2

5N6

3N9

2N7

2N2

1N5

1N2

1N8

Product No. Manufacturer

E4991A+16196D Agilent Technologies

(17/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries

MHQ0603P Type

SHAPE & DIMENSIONS

RECOMMENDED LAND PATTERN

Dimensions in mm

0.15±0.050.15±0.05

0.65±0.05

0.09±0.04 0.09±0.04

0.35±0.050.35±0.05

Dimensions in mm

0.30

0.25 0.30 0.25

(18/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ0603P Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

・Short bar residual inductance =0.48nH

○Measurement equipment

＊ Equivalent measurement equipment may be used.

LL measuring

frequency

(MHz)

min.

Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.

(nH) Tolerance min. typ. max. typ.

0.6 ±0.1nH 500 — 500 10.0 20.0 0.07 0.02 1000 MHQ0603P0N6BT000

0.6 ±0.2nH 500 —500 10.0 20.0 0.07 0.02 1000 MHQ0603P0N6CT000

0.7 ±0.1nH 500 — 500 10.0 20.0 0.07 0.02 1000 MHQ0603P0N7BT000

0.7 ±0.2nH 500 —500 10.0 20.0 0.07 0.02 1000 MHQ0603P0N7CT000

0.8 ±0.1nH 500 — 500 10.0 20.0 0.07 0.02 1000 MHQ0603P0N8BT000

0.8 ±0.2nH 500 —500 10.0 20.0 0.07 0.02 1000 MHQ0603P0N8CT000

0.9 ±0.1nH 500 — 500 10.0 18.8 0.07 0.02 1000 MHQ0603P0N9BT000

0.9 ±0.2nH 500 —500 10.0 18.8 0.07 0.02 1000 MHQ0603P0N9CT000

1.0 ±0.1nH 500 — 500 10.0 19.3 0.07 0.03 1000 MHQ0603P1N0BT000

1.0 ±0.2nH 500 —500 10.0 19.3 0.07 0.03 1000 MHQ0603P1N0CT000

1.0 ±0.3nH 500 — 500 10.0 19.3 0.07 0.03 1000 MHQ0603P1N0ST000

1.1 ±0.1nH 500 —500 10.0 19.3 0.07 0.03 1000 MHQ0603P1N1BT000

1.1 ±0.2nH 500 — 500 10.0 19.3 0.07 0.03 1000 MHQ0603P1N1CT000

1.1 ±0.3nH 500 —500 10.0 19.3 0.07 0.03 1000 MHQ0603P1N1ST000

1.2 ±0.1nH 500 — 500 10.0 20.0 0.08 0.04 1000 MHQ0603P1N2BT000

1.2 ±0.2nH 500 —500 10.0 20.0 0.08 0.04 1000 MHQ0603P1N2CT000

1.2 ±0.3nH 500 — 500 10.0 20.0 0.08 0.04 1000 MHQ0603P1N2ST000

1.3 ±0.1nH 500 —500 10.0 20.0 0.10 0.06 800 MHQ0603P1N3BT000

1.3 ±0.2nH 500 — 500 10.0 20.0 0.10 0.06 800 MHQ0603P1N3CT000

1.3 ±0.3nH 500 —500 10.0 20.0 0.10 0.06 800 MHQ0603P1N3ST000

1.4 ±0.1nH 500 — 500 10.0 18.6 0.10 0.06 800 MHQ0603P1N4BT000

1.4 ±0.2nH 500 —500 10.0 18.6 0.10 0.06 800 MHQ0603P1N4CT000

1.4 ±0.3nH 500 — 500 10.0 18.6 0.10 0.06 800 MHQ0603P1N4ST000

1.5 ±0.1nH 500 16 500 10.0 19.5 0.10 0.05 800 MHQ0603P1N5BT000

1.5 ±0.2nH 500 16 500 10.0 19.5 0.10 0.05 800 MHQ0603P1N5CT000

1.5 ±0.3nH 500 16 500 10.0 19.5 0.10 0.05 800 MHQ0603P1N5ST000

1.6 ±0.1nH 500 16 500 10.0 17.5 0.10 0.06 800 MHQ0603P1N6BT000

1.6 ±0.2nH 500 16 500 10.0 17.5 0.10 0.06 800 MHQ0603P1N6CT000

1.6 ±0.3nH 500 16 500 10.0 17.5 0.10 0.06 800 MHQ0603P1N6ST000

1.7 ±0.1nH 500 16 500 10.0 16.7 0.10 0.07 800 MHQ0603P1N7BT000

1.7 ±0.2nH 500 16 500 10.0 16.7 0.10 0.07 800 MHQ0603P1N7CT000

1.7 ±0.3nH 500 16 500 10.0 16.7 0.10 0.07 800 MHQ0603P1N7ST000

1.8 ±0.1nH 500 16 500 10.0 15.8 0.12 0.07 700 MHQ0603P1N8BT000

1.8 ±0.2nH 500 16 500 10.0 15.8 0.12 0.07 700 MHQ0603P1N8CT000

1.8 ±0.3nH 500 16 500 10.0 15.8 0.12 0.07 700 MHQ0603P1N8ST000

1.9 ±0.1nH 500 16 500 10.0 16.1 0.12 0.08 700 MHQ0603P1N9BT000

1.9 ±0.2nH 500 16 500 10.0 16.1 0.12 0.08 700 MHQ0603P1N9CT000

1.9 ±0.3nH 500 16 500 10.0 16.1 0.12 0.08 700 MHQ0603P1N9ST000

2.0 ±0.1nH 500 16 500 10.0 13.8 0.12 0.08 700 MHQ0603P2N0BT000

2.0 ±0.2nH 500 16 500 10.0 13.8 0.12 0.08 700 MHQ0603P2N0CT000

2.0 ±0.3nH 500 16 500 10.0 13.8 0.12 0.08 700 MHQ0603P2N0ST000

2.1 ±0.1nH 500 16 500 10.0 12.7 0.15 0.08 700 MHQ0603P2N1BT000

2.1 ±0.2nH 500 16 500 10.0 12.7 0.15 0.08 700 MHQ0603P2N1CT000

2.1 ±0.3nH 500 16 500 10.0 12.7 0.15 0.08 700 MHQ0603P2N1ST000

Measurement item Product No. Manufacturer

L, Q 4991A+16197A Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance Type-7561 Yokogawa

(19/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ0603P Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

・Short bar residual inductance =0.48nH

○Measurement equipment

＊ Equivalent measurement equipment may be used.

LL measuring

frequency

(MHz)

min.

Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.

(nH) Tolerance min. typ. max. typ.

2.2 ±0.1nH 500 16 500 10.0 13.2 0.15 0.09 700 MHQ0603P2N2BT000

2.2 ±0.2nH 500 16 500 10.0 13.2 0.15 0.09 700 MHQ0603P2N2CT000

2.2 ±0.3nH 500 16 500 10.0 13.2 0.15 0.09 700 MHQ0603P2N2ST000

2.3 ±0.1nH 500 16 500 10.0 12.5 0.15 0.08 700 MHQ0603P2N3BT000

2.3 ±0.2nH 500 16 500 10.0 12.5 0.15 0.08 700 MHQ0603P2N3CT000

2.3 ±0.3nH 500 16 500 10.0 12.5 0.15 0.08 700 MHQ0603P2N3ST000

2.4 ±0.1nH 500 16 500 8.0 11.7 0.15 0.08 700 MHQ0603P2N4BT000

2.4 ±0.2nH 500 16 500 8.0 11.7 0.15 0.08 700 MHQ0603P2N4CT000

2.4 ±0.3nH 500 16 500 8.0 11.7 0.15 0.08 700 MHQ0603P2N4ST000

2.5 ±0.1nH 500 16 500 8.0 11.1 0.25 0.17 500 MHQ0603P2N5BT000

2.5 ±0.2nH 500 16 500 8.0 11.1 0.25 0.17 500 MHQ0603P2N5CT000

2.5 ±0.3nH 500 16 500 8.0 11.1 0.25 0.17 500 MHQ0603P2N5ST000

2.6 ±0.1nH 500 16 500 8.0 11.1 0.25 0.16 500 MHQ0603P2N6BT000

2.6 ±0.2nH 500 16 500 8.0 11.1 0.25 0.16 500 MHQ0603P2N6CT000

2.6 ±0.3nH 500 16 500 8.0 11.1 0.25 0.16 500 MHQ0603P2N6ST000

2.7 ±0.1nH 500 16 500 8.0 10.5 0.25 0.16 500 MHQ0603P2N7BT000

2.7 ±0.2nH 500 16 500 8.0 10.5 0.25 0.16 500 MHQ0603P2N7CT000

2.7 ±0.3nH 500 16 500 8.0 10.5 0.25 0.16 500 MHQ0603P2N7ST000

2.8 ±0.1nH 500 16 500 8.0 10.6 0.25 0.18 500 MHQ0603P2N8BT000

2.8 ±0.2nH 500 16 500 8.0 10.6 0.25 0.18 500 MHQ0603P2N8CT000

2.8 ±0.3nH 500 16 500 8.0 10.6 0.25 0.18 500 MHQ0603P2N8ST000

2.9 ±0.1nH 500 16 500 8.0 10.8 0.30 0.19 450 MHQ0603P2N9BT000

2.9 ±0.2nH 500 16 500 8.0 10.8 0.30 0.19 450 MHQ0603P2N9CT000

2.9 ±0.3nH 500 16 500 8.0 10.8 0.30 0.19 450 MHQ0603P2N9ST000

3.0 ±0.1nH 500 16 500 8.0 10.3 0.30 0.19 450 MHQ0603P3N0BT000

3.0 ±0.2nH 500 16 500 8.0 10.3 0.30 0.19 450 MHQ0603P3N0CT000

3.0 ±0.3nH 500 16 500 8.0 10.3 0.30 0.19 450 MHQ0603P3N0ST000

3.1 ±0.1nH 500 16 500 8.0 10.5 0.30 0.19 450 MHQ0603P3N1BT000

3.1 ±0.2nH 500 16 500 8.0 10.5 0.30 0.19 450 MHQ0603P3N1CT000

3.1 ±0.3nH 500 16 500 8.0 10.5 0.30 0.19 450 MHQ0603P3N1ST000

3.2 ±0.1nH 500 16 500 7.0 9.5 0.20 0.13 550 MHQ0603P3N2BT000

3.2 ±0.2nH 500 16 500 7.0 9.5 0.20 0.13 550 MHQ0603P3N2CT000

3.2 ±0.3nH 500 16 500 7.0 9.5 0.20 0.13 550 MHQ0603P3N2ST000

3.3 ±0.1nH 500 16 500 7.0 9.6 0.25 0.15 500 MHQ0603P3N3BT000

3.3 ±0.2nH 500 16 500 7.0 9.6 0.25 0.15 500 MHQ0603P3N3CT000

3.3 ±0.3nH 500 16 500 7.0 9.6 0.25 0.15 500 MHQ0603P3N3ST000

3.4 ±0.1nH 500 16 500 6.5 9.3 0.25 0.14 500 MHQ0603P3N4BT000

3.4 ±0.2nH 500 16 500 6.5 9.3 0.25 0.14 500 MHQ0603P3N4CT000

3.4 ±0.3nH 500 16 500 6.5 9.3 0.25 0.14 500 MHQ0603P3N4ST000

3.5 ±0.1nH 500 16 500 6.5 9.5 0.25 0.17 500 MHQ0603P3N5BT000

3.5 ±0.2nH 500 16 500 6.5 9.5 0.25 0.17 500 MHQ0603P3N5CT000

3.5 ±0.3nH 500 16 500 6.5 9.5 0.25 0.17 500 MHQ0603P3N5ST000

3.6 ±0.1nH 500 16 500 6.5 9.1 0.25 0.16 500 MHQ0603P3N6BT000

3.6 ±0.2nH 500 16 500 6.5 9.1 0.25 0.16 500 MHQ0603P3N6CT000

3.6 ±0.3nH 500 16 500 6.5 9.1 0.25 0.16 500 MHQ0603P3N6ST000

Measurement item Product No. Manufacturer

L, Q 4991A+16197A Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance Type-7561 Yokogawa

(20/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ0603P Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

・Short bar residual inductance =0.48nH

○Measurement equipment

＊ Equivalent measurement equipment may be used.

LL measuring

frequency

(MHz)

min.

Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.

(nH) Tolerance min. typ. max. typ.

3.7 ±0.1nH 500 16 500 6.5 9.1 0.25 0.17 450 MHQ0603P3N7BT000

3.7 ±0.2nH 500 16 500 6.5 9.1 0.25 0.17 450 MHQ0603P3N7CT000

3.7 ±0.3nH 500 16 500 6.5 9.1 0.25 0.17 450 MHQ0603P3N7ST000

3.8 ±0.1nH 500 16 500 6.5 9.1 0.30 0.19 450 MHQ0603P3N8BT000

3.8 ±0.2nH 500 16 500 6.5 9.1 0.30 0.19 450 MHQ0603P3N8CT000

3.8 ±0.3nH 500 16 500 6.5 9.1 0.30 0.19 450 MHQ0603P3N8ST000

3.9 ±0.1nH 500 16 500 6.5 9.2 0.35 0.23 400 MHQ0603P3N9BT000

3.9 ±0.2nH 500 16 500 6.5 9.2 0.35 0.23 400 MHQ0603P3N9CT000

3.9 ±0.3nH 500 16 500 6.5 9.2 0.35 0.23 400 MHQ0603P3N9ST000

4.0 ±0.1nH 500 16 500 6.0 8.5 0.35 0.26 400 MHQ0603P4N0BT000

4.0 ±0.2nH 500 16 500 6.0 8.5 0.35 0.26 400 MHQ0603P4N0CT000

4.0 ±0.3nH 500 16 500 6.0 8.5 0.35 0.26 400 MHQ0603P4N0ST000

4.1 ±0.1nH 500 16 500 6.0 8.3 0.35 0.22 400 MHQ0603P4N1BT000

4.1 ±0.2nH 500 16 500 6.0 8.3 0.35 0.22 400 MHQ0603P4N1CT000

4.1 ±0.3nH 500 16 500 6.0 8.3 0.35 0.22 400 MHQ0603P4N1ST000

4.2 ±0.1nH 500 16 500 6.0 8.2 0.35 0.23 400 MHQ0603P4N2BT000

4.2 ±0.2nH 500 16 500 6.0 8.2 0.35 0.23 400 MHQ0603P4N2CT000

4.2 ±0.3nH 500 16 500 6.0 8.2 0.35 0.23 400 MHQ0603P4N2ST000

4.3 ±0.2nH 500 16 500 6.0 8.2 0.35 0.23 400 MHQ0603P4N3CT000

4.3 ±0.3nH 500 16 500 6.0 8.2 0.35 0.23 400 MHQ0603P4N3ST000

4.3 ±3% 500 16 500 6.0 8.2 0.35 0.23 400 MHQ0603P4N3HT000

4.7 ±0.2nH 500 16 500 5.5 7.9 0.40 0.25 350 MHQ0603P4N7CT000

4.7 ±0.3nH 500 16 500 5.5 7.9 0.40 0.25 350 MHQ0603P4N7ST000

4.7 ±3% 500 16 500 5.5 7.9 0.40 0.25 350 MHQ0603P4N7HT000

5.1 ±0.2nH 500 16 500 5.5 7.8 0.40 0.24 350 MHQ0603P5N1CT000

5.1 ±0.3nH 500 16 500 5.5 7.8 0.40 0.24 350 MHQ0603P5N1ST000

5.1 ±3% 500 16 500 5.5 7.8 0.40 0.24 350 MHQ0603P5N1HT000

5.6 ±0.2nH 500 16 500 5.0 7.1 0.40 0.29 350 MHQ0603P5N6CT000

5.6 ±0.3nH 500 16 500 5.0 7.1 0.40 0.29 350 MHQ0603P5N6ST000

5.6 ±3% 500 16 500 5.0 7.1 0.40 0.29 350 MHQ0603P5N6HT000

6.2 ±0.3nH 500 16 500 4.0 6.7 0.70 0.52 300 MHQ0603P6N2ST000

6.2 ±3% 500 16 500 4.0 6.7 0.70 0.52 300 MHQ0603P6N2HT000

6.8 ±3% 500 16 500 4.0 6.8 0.70 0.53 300 MHQ0603P6N8HT000

6.8 ±5% 500 16 500 4.0 6.8 0.70 0.53 300 MHQ0603P6N8JT000

7.5 ±3% 500 16 500 3.8 5.7 0.50 0.37 300 MHQ0603P7N5HT000

7.5 ±5% 500 16 500 3.8 5.7 0.50 0.37 300 MHQ0603P7N5JT000

8.2 ±3% 500 16 500 3.8 5.4 0.90 0.64 250 MHQ0603P8N2HT000

8.2 ±5% 500 16 500 3.8 5.4 0.90 0.64 250 MHQ0603P8N2JT000

9.1 ±3% 500 16 500 3.8 5.5 0.90 0.62 250 MHQ0603P9N1HT000

9.1 ±5% 500 16 500 3.8 5.5 0.90 0.62 250 MHQ0603P9N1JT000

10 ±3% 500 16 500 3.5 5.2 1.20 0.86 240 MHQ0603P10NHT000

10 ±5% 500 16 500 3.5 5.2 1.20 0.86 240 MHQ0603P10NJT000

11 ±3% 500 16 500 3.2 4.6 1.30 0.89 240 MHQ0603P11NHT000

11 ±5% 500 16 500 3.2 4.6 1.30 0.89 240 MHQ0603P11NJT000

Measurement item Product No. Manufacturer

L, Q 4991A+16197A Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance Type-7561 Yokogawa

(21/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ0603P Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

・Short bar residual inductance =0.48nH

○Measurement equipment

＊ Equivalent measurement equipment may be used.

LL measuring

frequency

(MHz)

min.

Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.

(nH) Tolerance min. typ. max. typ.

12 ±3% 500 16 500 3.2 4.6 1.40 0.77 240 MHQ0603P12NHT000

12 ±5% 500 16 500 3.2 4.6 1.40 0.77 240 MHQ0603P12NJT000

13 ±3% 500 16 500 3.2 4.5 1.50 1.01 180 MHQ0603P13NHT000

13 ±5% 500 16 500 3.2 4.5 1.50 1.01 180 MHQ0603P13NJT000

15 ±3% 500 16 500 2.8 4.2 1.50 1.05 180 MHQ0603P15NHT000

15 ±5% 500 16 500 2.8 4.2 1.50 1.05 180 MHQ0603P15NJT000

16 ±3% 500 16 500 2.5 4.0 1.70 1.21 180 MHQ0603P16NHT000

16 ±5% 500 16 500 2.5 4.0 1.70 1.21 180 MHQ0603P16NJT000

18 ±3% 500 16 500 2.4 3.7 1.70 1.21 180 MHQ0603P18NHT000

18 ±5% 500 16 500 2.4 3.7 1.70 1.21 180 MHQ0603P18NJT000

20 ±3% 500 16 500 2.4 3.5 2.00 1.38 160 MHQ0603P20NHT000

20 ±5% 500 16 500 2.4 3.5 2.00 1.38 160 MHQ0603P20NJT000

22 ±3% 500 16 500 2.2 3.3 2.00 1.40 160 MHQ0603P22NHT000

22 ±5% 500 16 500 2.2 3.3 2.00 1.40 160 MHQ0603P22NJT000

24 ±3% 500 16 500 2.1 3.1 2.20 1.55 160 MHQ0603P24NHT000

24 ±5% 500 16 500 2.1 3.1 2.20 1.55 160 MHQ0603P24NJT000

27 ±3% 500 16 500 2.0 2.9 2.20 1.55 160 MHQ0603P27NHT000

27 ±5% 500 16 500 2.0 2.9 2.20 1.55 160 MHQ0603P27NJT000

30 ±3% 500 16 500 1.9 2.7 2.70 1.98 160 MHQ0603P30NHT000

30 ±5% 500 16 500 1.9 2.7 2.70 1.98 160 MHQ0603P30NJT000

33 ±3% 300 14 300 1.8 2.5 2.80 2.06 160 MHQ0603P33NHT000

33 ±5% 300 14 300 1.8 2.5 2.80 2.06 160 MHQ0603P33NJT000

36 ±3% 300 14 300 1.7 2.4 2.80 2.08 160 MHQ0603P36NHT000

36 ±5% 300 14 300 1.7 2.4 2.80 2.08 160 MHQ0603P36NJT000

39 ±3% 300 14 300 1.6 2.3 3.00 2.24 160 MHQ0603P39NHT000

39 ±5% 300 14 300 1.6 2.3 3.00 2.24 160 MHQ0603P39NJT000

Measurement item Product No. Manufacturer

L, Q 4991A+16197A Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance Type-7561 Yokogawa

(22/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ0603P Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

0.6 0.6 0.6 0.6 0.6 29min. 38min. 58min. 60min. 66min. MHQ0603P0N6BT000

0.6 0.6 0.6 0.6 0.6 29min. 38min. 58min. 60min. 66min. MHQ0603P0N6CT000

0.7 0.7 0.7 0.7 0.7 29min. 38min. 58min. 60min. 66min. MHQ0603P0N7BT000

0.7 0.7 0.7 0.7 0.7 29min. 38min. 58min. 60min. 66min. MHQ0603P0N7CT000

0.8 0.8 0.8 0.8 0.8 29min. 38min. 58min. 60min. 66min. MHQ0603P0N8BT000

0.8 0.8 0.8 0.8 0.8 29min. 38min. 58min. 60min. 66min. MHQ0603P0N8CT000

0.9 0.9 0.9 0.9 0.9 29min. 38min. 58min. 60min. 66min. MHQ0603P0N9BT000

0.9 0.9 0.9 0.9 0.9 29min. 38min. 58min. 60min. 66min. MHQ0603P0N9CT000

1.0 1.0 1.0 1.0 1.0 29min. 38min. 58min. 60min. 66min. MHQ0603P1N0BT000

1.0 1.0 1.0 1.0 1.0 29min. 38min. 58min. 60min. 66min. MHQ0603P1N0CT000

1.0 1.0 1.0 1.0 1.0 29min. 38min. 58min. 60min. 66min. MHQ0603P1N0ST000

1.1 1.1 1.1 1.1 1.1 29min. 38min. 58min. 60min. 66min. MHQ0603P1N1BT000

1.1 1.1 1.1 1.1 1.1 29min. 38min. 58min. 60min. 66min. MHQ0603P1N1CT000

1.1 1.1 1.1 1.1 1.1 29min. 38min. 58min. 60min. 66min. MHQ0603P1N1ST000

1.2 1.2 1.2 1.2 1.2 29min. 38min. 58min. 60min. 66min. MHQ0603P1N2BT000

1.2 1.2 1.2 1.2 1.2 29min. 38min. 58min. 60min. 66min. MHQ0603P1N2CT000

1.2 1.2 1.2 1.2 1.2 29min. 38min. 58min. 60min. 66min. MHQ0603P1N2ST000

1.3 1.3 1.3 1.3 1.3 29min. 38min. 58min. 60min. 66min. MHQ0603P1N3BT000

1.3 1.3 1.3 1.3 1.3 29min. 38min. 58min. 60min. 66min. MHQ0603P1N3CT000

1.3 1.3 1.3 1.3 1.3 29min. 38min. 58min. 60min. 66min. MHQ0603P1N3ST000

1.4 1.4 1.4 1.4 1.4 29min. 38min. 58min. 60min. 66min. MHQ0603P1N4BT000

1.4 1.4 1.4 1.4 1.4 29min. 38min. 58min. 60min. 66min. MHQ0603P1N4CT000

1.4 1.4 1.4 1.4 1.4 29min. 38min. 58min. 60min. 66min. MHQ0603P1N4ST000

1.5 1.5 1.5 1.5 1.5 29 38 58 60 66 MHQ0603P1N5BT000

1.5 1.5 1.5 1.5 1.5 29 38 58 60 66 MHQ0603P1N5CT000

1.5 1.5 1.5 1.5 1.5 29 38 58 60 66 MHQ0603P1N5ST000

1.6 1.6 1.6 1.6 1.6 28 37 56 60 66 MHQ0603P1N6BT000

1.6 1.6 1.6 1.6 1.6 28 37 56 60 66 MHQ0603P1N6CT000

1.6 1.6 1.6 1.6 1.6 28 37 56 60 66 MHQ0603P1N6ST000

1.7 1.7 1.7 1.7 1.7 30 39 62 65 71 MHQ0603P1N7BT000

1.7 1.7 1.7 1.7 1.7 30 39 62 65 71 MHQ0603P1N7CT000

1.7 1.7 1.7 1.7 1.7 30 39 62 65 71 MHQ0603P1N7ST000

1.8 1.8 1.8 1.8 1.8 29 38 59 62 69 MHQ0603P1N8BT000

1.8 1.8 1.8 1.8 1.8 29 38 59 62 69 MHQ0603P1N8CT000

1.8 1.8 1.8 1.8 1.8 29 38 59 62 69 MHQ0603P1N8ST000

1.9 1.9 1.9 1.9 1.9 28 38 57 60 66 MHQ0603P1N9BT000

1.9 1.9 1.9 1.9 1.9 28 38 57 60 66 MHQ0603P1N9CT000

1.9 1.9 1.9 1.9 1.9 28 38 57 60 66 MHQ0603P1N9ST000

2.0 2.0 2.0 2.0 2.0 27 35 55 58 64 MHQ0603P2N0BT000

2.0 2.0 2.0 2.0 2.0 27 35 55 58 64 MHQ0603P2N0CT000

2.0 2.0 2.0 2.0 2.0 27 35 55 58 64 MHQ0603P2N0ST000

2.1 2.1 2.1 2.1 2.2 29 37 58 62 68 MHQ0603P2N1BT000

2.1 2.1 2.1 2.1 2.2 29 37 58 62 68 MHQ0603P2N1CT000

2.1 2.1 2.1 2.1 2.2 29 37 58 62 68 MHQ0603P2N1ST000

Product No. Manufacturer

4291B+16193A Agilent Technologies

(23/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ0603P Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

2.2 2.2 2.2 2.2 2.3 28 37 57 61 68 MHQ0603P2N2BT000

2.2 2.2 2.2 2.2 2.3 28 37 57 61 68 MHQ0603P2N2CT000

2.2 2.2 2.2 2.2 2.3 28 37 57 61 68 MHQ0603P2N2ST000

2.3 2.3 2.3 2.3 2.4 31 40 61 64 71 MHQ0603P2N3BT000

2.3 2.3 2.3 2.3 2.4 31 40 61 64 71 MHQ0603P2N3CT000

2.3 2.3 2.3 2.3 2.4 31 40 61 64 71 MHQ0603P2N3ST000

2.4 2.4 2.4 2.4 2.5 31 41 62 64 71 MHQ0603P2N4BT000

2.4 2.4 2.4 2.4 2.5 31 41 62 64 71 MHQ0603P2N4CT000

2.4 2.4 2.4 2.4 2.5 31 41 62 64 71 MHQ0603P2N4ST000

2.5 2.5 2.5 2.6 2.6 25 32 51 53 59 MHQ0603P2N5BT000

2.5 2.5 2.5 2.6 2.6 25 32 51 53 59 MHQ0603P2N5CT000

2.5 2.5 2.5 2.6 2.6 25 32 51 53 59 MHQ0603P2N5ST000

2.6 2.6 2.6 2.7 2.7 26 34 54 56 62 MHQ0603P2N6BT000

2.6 2.6 2.6 2.7 2.7 26 34 54 56 62 MHQ0603P2N6CT000

2.6 2.6 2.6 2.7 2.7 26 34 54 56 62 MHQ0603P2N6ST000

2.7 2.7 2.7 2.8 2.8 26 34 54 57 63 MHQ0603P2N7BT000

2.7 2.7 2.7 2.8 2.8 26 34 54 57 63 MHQ0603P2N7CT000

2.7 2.7 2.7 2.8 2.8 26 34 54 57 63 MHQ0603P2N7ST000

2.8 2.8 2.8 2.9 2.9 26 35 54 55 62 MHQ0603P2N8BT000

2.8 2.8 2.8 2.9 2.9 26 35 54 55 62 MHQ0603P2N8CT000

2.8 2.8 2.8 2.9 2.9 26 35 54 55 62 MHQ0603P2N8ST000

2.9 2.9 2.9 3.0 3.0 24 31 48 51 56 MHQ0603P2N9BT000

2.9 2.9 2.9 3.0 3.0 24 31 48 51 56 MHQ0603P2N9CT000

2.9 2.9 2.9 3.0 3.0 24 31 48 51 56 MHQ0603P2N9ST000

3.0 3.0 3.0 3.1 3.1 23 30 46 48 52 MHQ0603P3N0BT000

3.0 3.0 3.0 3.1 3.1 23 30 46 48 52 MHQ0603P3N0CT000

3.0 3.0 3.0 3.1 3.1 23 30 46 48 52 MHQ0603P3N0ST000

3.1 3.1 3.2 3.2 3.2 24 32 49 51 57 MHQ0603P3N1BT000

3.1 3.1 3.2 3.2 3.2 24 32 49 51 57 MHQ0603P3N1CT000

3.1 3.1 3.2 3.2 3.2 24 32 49 51 57 MHQ0603P3N1ST000

3.2 3.2 3.3 3.3 3.4 27 35 53 55 61 MHQ0603P3N2BT000

3.2 3.2 3.3 3.3 3.4 27 35 53 55 61 MHQ0603P3N2CT000

3.2 3.2 3.3 3.3 3.4 27 35 53 55 61 MHQ0603P3N2ST000

3.3 3.3 3.4 3.4 3.5 25 32 48 50 54 MHQ0603P3N3BT000

3.3 3.3 3.4 3.4 3.5 25 32 48 50 54 MHQ0603P3N3CT000

3.3 3.3 3.4 3.4 3.5 25 32 48 50 54 MHQ0603P3N3ST000

3.4 3.4 3.5 3.5 3.6 27 35 53 55 61 MHQ0603P3N4BT000

3.4 3.4 3.5 3.5 3.6 27 35 53 55 61 MHQ0603P3N4CT000

3.4 3.4 3.5 3.5 3.6 27 35 53 55 61 MHQ0603P3N4ST000

3.5 3.5 3.6 3.6 3.7 25 33 50 52 57 MHQ0603P3N5BT000

3.5 3.5 3.6 3.6 3.7 25 33 50 52 57 MHQ0603P3N5CT000

3.5 3.5 3.6 3.6 3.7 25 33 50 52 57 MHQ0603P3N5ST000

3.6 3.6 3.7 3.7 3.8 26 33 50 52 57 MHQ0603P3N6BT000

3.6 3.6 3.7 3.7 3.8 26 33 50 52 57 MHQ0603P3N6CT000

3.6 3.6 3.7 3.7 3.8 26 33 50 52 57 MHQ0603P3N6ST000

Product No. Manufacturer

4291B+16193A Agilent Technologies

(24/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ0603P Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

3.7 3.7 3.8 3.8 3.9 26 34 51 52 58 MHQ0603P3N7BT000

3.7 3.7 3.8 3.8 3.9 26 34 51 52 58 MHQ0603P3N7CT000

3.7 3.7 3.8 3.8 3.9 26 34 51 52 58 MHQ0603P3N7ST000

3.8 3.8 3.9 3.9 4.0 24 32 49 51 56 MHQ0603P3N8BT000

3.8 3.8 3.9 3.9 4.0 24 32 49 51 56 MHQ0603P3N8CT000

3.8 3.8 3.9 3.9 4.0 24 32 49 51 56 MHQ0603P3N8ST000

3.9 3.9 4.0 4.1 4.2 23 30 47 49 54 MHQ0603P3N9BT000

3.9 3.9 4.0 4.1 4.2 23 30 47 49 54 MHQ0603P3N9CT000

3.9 3.9 4.0 4.1 4.2 23 30 47 49 54 MHQ0603P3N9ST000

4.0 4.0 4.1 4.2 4.3 26 34 52 53 59 MHQ0603P4N0BT000

4.0 4.0 4.1 4.2 4.3 26 34 52 53 59 MHQ0603P4N0CT000

4.0 4.0 4.1 4.2 4.3 26 34 52 53 59 MHQ0603P4N0ST000

4.1 4.1 4.2 4.3 4.4 23 30 46 48 52 MHQ0603P4N1BT000

4.1 4.1 4.2 4.3 4.4 23 30 46 48 52 MHQ0603P4N1CT000

4.1 4.1 4.2 4.3 4.4 23 30 46 48 52 MHQ0603P4N1ST000

4.2 4.2 4.3 4.4 4.5 24 31 46 48 52 MHQ0603P4N2BT000

4.2 4.2 4.3 4.4 4.5 24 31 46 48 52 MHQ0603P4N2CT000

4.2 4.2 4.3 4.4 4.5 24 31 46 48 52 MHQ0603P4N2ST000

4.3 4.3 4.4 4.5 4.6 25 33 49 51 56 MHQ0603P4N3CT000

4.3 4.3 4.4 4.5 4.6 25 33 49 51 56 MHQ0603P4N3ST000

4.3 4.3 4.4 4.5 4.6 25 33 49 51 56 MHQ0603P4N3HT000

4.7 4.7 4.9 4.9 5.1 24 31 47 49 54 MHQ0603P4N7CT000

4.7 4.7 4.9 4.9 5.1 24 31 47 49 54 MHQ0603P4N7ST000

4.7 4.7 4.9 4.9 5.1 24 31 47 49 54 MHQ0603P4N7HT000

5.1 5.1 5.3 5.4 5.5 25 32 49 51 56 MHQ0603P5N1CT000

5.1 5.1 5.3 5.4 5.5 25 32 49 51 56 MHQ0603P5N1ST000

5.1 5.1 5.3 5.4 5.5 25 32 49 51 56 MHQ0603P5N1HT000

5.6 5.6 5.9 6.0 6.2 24 31 46 48 52 MHQ0603P5N6CT000

5.6 5.6 5.9 6.0 6.2 24 31 46 48 52 MHQ0603P5N6ST000

5.6 5.6 5.9 6.0 6.2 24 31 46 48 52 MHQ0603P5N6HT000

6.2 6.2 6.6 6.7 7.0 21 28 42 43 47 MHQ0603P6N2ST000

6.2 6.2 6.6 6.7 7.0 21 28 42 43 47 MHQ0603P6N2HT000

6.8 6.8 7.2 7.4 7.7 22 28 43 44 48 MHQ0603P6N8HT000

6.8 6.8 7.2 7.4 7.7 22 28 43 44 48 MHQ0603P6N8JT000

7.5 7.5 8.1 8.3 8.8 24 30 44 45 48 MHQ0603P7N5HT000

7.5 7.5 8.1 8.3 8.8 24 30 44 45 48 MHQ0603P7N5JT000

8.2 8.2 8.9 9.2 9.7 21 27 39 40 42 MHQ0603P8N2HT000

8.2 8.2 8.9 9.2 9.7 21 27 39 40 42 MHQ0603P8N2JT000

9.1 9.2 9.9 10.2 10.9 23 29 42 44 46 MHQ0603P9N1HT000

9.1 9.2 9.9 10.2 10.9 23 29 42 44 46 MHQ0603P9N1JT000

10.0 10.0 11.0 11.0 12.0 22 28 41 42 43 MHQ0603P10NHT000

10.0 10.0 11.0 11.0 12.0 22 28 41 42 43 MHQ0603P10NJT000

11.0 11.0 12.0 13.0 14.0 21 27 37 38 39 MHQ0603P11NHT000

11.0 11.0 12.0 13.0 14.0 21 27 37 38 39 MHQ0603P11NJT000

Product No. Manufacturer

4291B+16193A Agilent Technologies

(25/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ0603P Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

12.0 12.0 14.0 14.0 16.0 23 29 41 41 41 MHQ0603P12NHT000

12.0 12.0 14.0 14.0 16.0 23 29 41 41 41 MHQ0603P12NJT000

13.0 13.0 15.0 16.0 18.0 21 27 36 36 36 MHQ0603P13NHT000

13.0 13.0 15.0 16.0 18.0 21 27 36 36 36 MHQ0603P13NJT000

15.0 15.0 18.0 19.0 21.0 23 29 37 37 36 MHQ0603P15NHT000

15.0 15.0 18.0 19.0 21.0 23 29 37 37 36 MHQ0603P15NJT000

16.0 16.0 19.0 20.0 23.0 22 28 37 37 35 MHQ0603P16NHT000

16.0 16.0 19.0 20.0 23.0 22 28 37 37 35 MHQ0603P16NJT000

18.0 18.0 22.0 24.0 28.0 23 28 36 35 33 MHQ0603P18NHT000

18.0 18.0 22.0 24.0 28.0 23 28 36 35 33 MHQ0603P18NJT000

20.0 21.0 26.0 28.0 34.0 22 27 33 32 27 MHQ0603P20NHT000

20.0 21.0 26.0 28.0 34.0 22 27 33 32 27 MHQ0603P20NJT000

22.0 23.0 29.0 32.0 40.0 23 29 34 33 28 MHQ0603P22NHT000

22.0 23.0 29.0 32.0 40.0 23 29 34 33 28 MHQ0603P22NJT000

24.0 25.0 34.0 38.0 — 22 26 29 27 — MHQ0603P24NHT000

24.0 25.0 34.0 38.0 —22 26 29 27 —MHQ0603P24NJT000

27.0 28.0 38.0 44.0 — 23 28 30 28 — MHQ0603P27NHT000

27.0 28.0 38.0 44.0 —23 28 30 28 —MHQ0603P27NJT000

30.0 32.0 47.0 — — 22 27 — — — MHQ0603P30NHT000

30.0 32.0 47.0 — — 22 27 ——— MHQ0603P30NJT000

33.0 35.0 55.0 — — 22 27 — — — MHQ0603P33NHT000

33.0 35.0 55.0 — — 22 27 ——— MHQ0603P33NJT000

36.0 38.0 67.0 — — 22 26 — — — MHQ0603P36NHT000

36.0 38.0 67.0 — — 22 26 ——— MHQ0603P36NJT000

39.0 42.0 79.0 — — 23 26 — — — MHQ0603P39NHT000

39.0 42.0 79.0 — — 23 26 ——— MHQ0603P39NJT000

Product No. Manufacturer

4291B+16193A Agilent Technologies

(26/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ0603PType

ELECTRICAL CHARACTERISTICS

L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)

○Measurement equipment

＊ Equivalent measurement equipment may be used.

1 10 100 1000 10000

100

Frequency (MHz)

Inductance (nH)

1N0

1N2

1N5

1N8

2N2

2N7

3N3

3N9

4N7

5N6

6N8

8N2

10N

12N

15N

18N

22N

27N

39N

33N

Product No. Manufacturer

E4991+16193A Agilent Technologies

(27/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ0603P Type

ELECTRICAL CHARACTERISTICS

Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)

○Measurement equipment

＊ Equivalent measurement equipment may be used.

1 10 100 1000 10000

Frequency (MHz)

100

1N0 1N2

1N5

1N8

2N2

2N7

3N3

3N9

4N7

5N6

6N8

8N2

10N

12N

15N

18N

22N

27N

33N

39N

Product No. Manufacturer

E4991+16193A Agilent Technologies

(28/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries

MHQ1005P Type

SHAPE & DIMENSIONS

RECOMMENDED LAND PATTERN

Dimensions in mm

0.22±0.080.22±0.08

1.00±0.05

0.12±0.05 0.12±0.05

0.60±0.050.50±0.10

Dimensions in mm

0.65

0.35 0.50 0.35

(29/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ1005P Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

・Short bar residual inductance =0.556nH

○Measurement equipment

＊ Equivalent measurement equipment may be used.

LL measuring

frequency

(MHz)

min.

Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.

(nH) Tolerance min. typ. max. typ.

0.7 ±0.1nH 100 — 250 15.0 18.3 0.03 0.01max. 1200 MHQ1005P0N7BT000

0.7 ±0.2nH 100 —250 15.0 18.3 0.03 0.01max. 1200 MHQ1005P0N7CT000

0.8 ±0.1nH 100 — 250 15.0 18.3 0.03 0.01max. 1200 MHQ1005P0N8BT000

0.8 ±0.2nH 100 —250 15.0 18.3 0.03 0.01max. 1200 MHQ1005P0N8CT000

0.9 ±0.1nH 100 — 250 15.0 18.6 0.03 0.01max. 1200 MHQ1005P0N9BT000

0.9 ±0.2nH 100 —250 15.0 18.6 0.03 0.01max. 1200 MHQ1005P0N9CT000

1.0 ±0.1nH 100 — 250 15.0 20.0 0.03 0.01 1200 MHQ1005P1N0BT000

1.0 ±0.2nH 100 —250 15.0 20.0 0.03 0.01 1200 MHQ1005P1N0CT000

1.0 ±0.3nH 100 — 250 15.0 20.0 0.03 0.01 1200 MHQ1005P1N0ST000

1.1 ±0.1nH 100 —250 14.0 20.0 0.03 0.02 1200 MHQ1005P1N1BT000

1.1 ±0.2nH 100 — 250 14.0 20.0 0.03 0.02 1200 MHQ1005P1N1CT000

1.1 ±0.3nH 100 —250 14.0 20.0 0.03 0.02 1200 MHQ1005P1N1ST000

1.2 ±0.1nH 100 — 250 13.0 20.0 0.03 0.01 1200 MHQ1005P1N2BT000

1.2 ±0.2nH 100 —250 13.0 20.0 0.03 0.01 1200 MHQ1005P1N2CT000

1.2 ±0.3nH 100 — 250 13.0 20.0 0.03 0.01 1200 MHQ1005P1N2ST000

1.3 ±0.1nH 100 —250 12.0 20.0 0.03 0.01 1200 MHQ1005P1N3BT000

1.3 ±0.2nH 100 — 250 12.0 20.0 0.03 0.01 1200 MHQ1005P1N3CT000

1.3 ±0.3nH 100 —250 12.0 20.0 0.03 0.01 1200 MHQ1005P1N3ST000

1.4 ±0.1nH 100 23 250 12.0 20.0 0.04 0.02 1000 MHQ1005P1N4BT000

1.4 ±0.2nH 100 23 250 12.0 20.0 0.04 0.02 1000 MHQ1005P1N4CT000

1.4 ±0.3nH 100 23 250 12.0 20.0 0.04 0.02 1000 MHQ1005P1N4ST000

1.5 ±0.1nH 100 23 250 11.0 19.7 0.04 0.02 1000 MHQ1005P1N5BT000

1.5 ±0.2nH 100 23 250 11.0 19.7 0.04 0.02 1000 MHQ1005P1N5CT000

1.5 ±0.3nH 100 23 250 11.0 19.7 0.04 0.02 1000 MHQ1005P1N5ST000

1.6 ±0.1nH 100 23 250 10.0 15.2 0.04 0.02 1000 MHQ1005P1N6BT000

1.6 ±0.2nH 100 23 250 10.0 15.2 0.04 0.02 1000 MHQ1005P1N6CT000

1.6 ±0.3nH 100 23 250 10.0 15.2 0.04 0.02 1000 MHQ1005P1N6ST000

1.7 ±0.1nH 100 23 250 10.0 15.4 0.04 0.02 1000 MHQ1005P1N7BT000

1.7 ±0.2nH 100 23 250 10.0 15.4 0.04 0.02 1000 MHQ1005P1N7CT000

1.7 ±0.3nH 100 23 250 10.0 15.4 0.04 0.02 1000 MHQ1005P1N7ST000

1.8 ±0.1nH 100 23 250 9.0 15.1 0.04 0.03 1000 MHQ1005P1N8BT000

1.8 ±0.2nH 100 23 250 9.0 15.1 0.04 0.03 1000 MHQ1005P1N8CT000

1.8 ±0.3nH 100 23 250 9.0 15.1 0.04 0.03 1000 MHQ1005P1N8ST000

1.9 ±0.1nH 100 23 250 8.0 14.8 0.05 0.03 1000 MHQ1005P1N9BT000

1.9 ±0.2nH 100 23 250 8.0 14.8 0.05 0.03 1000 MHQ1005P1N9CT000

1.9 ±0.3nH 100 23 250 8.0 14.8 0.05 0.03 1000 MHQ1005P1N9ST000

2.0 ±0.1nH 100 23 250 8.0 11.5 0.05 0.03 1000 MHQ1005P2N0BT000

2.0 ±0.2nH 100 23 250 8.0 11.5 0.05 0.03 1000 MHQ1005P2N0CT000

2.0 ±0.3nH 100 23 250 8.0 11.5 0.05 0.03 1000 MHQ1005P2N0ST000

2.1 ±0.1nH 100 23 250 8.0 13.1 0.06 0.04 1000 MHQ1005P2N1BT000

2.1 ±0.2nH 100 23 250 8.0 13.1 0.06 0.04 1000 MHQ1005P2N1CT000

2.1 ±0.3nH 100 23 250 8.0 13.1 0.06 0.04 1000 MHQ1005P2N1ST000

2.2 ±0.1nH 100 23 250 8.0 12.1 0.06 0.04 1000 MHQ1005P2N2BT000

2.2 ±0.2nH 100 23 250 8.0 12.1 0.06 0.04 1000 MHQ1005P2N2CT000

2.2 ±0.3nH 100 23 250 8.0 12.1 0.06 0.04 1000 MHQ1005P2N2ST000

Measurement item Product No. Manufacturer

L, Q 4291B+16193A Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance Type-7561 Yokogawa

(30/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ1005P Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

・Short bar residual inductance =0.556nH

○Measurement equipment

＊ Equivalent measurement equipment may be used.

LL measuring

frequency

(MHz)

min.

Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.

(nH) Tolerance min. typ. max. typ.

2.3 ±0.1nH 100 23 250 7.0 10.5 0.07 0.05 1000 MHQ1005P2N3BT000

2.3 ±0.2nH 100 23 250 7.0 10.5 0.07 0.05 1000 MHQ1005P2N3CT000

2.3 ±0.3nH 100 23 250 7.0 10.5 0.07 0.05 1000 MHQ1005P2N3ST000

2.4 ±0.1nH 100 23 250 6.5 9.8 0.06 0.04 1000 MHQ1005P2N4BT000

2.4 ±0.2nH 100 23 250 6.5 9.8 0.06 0.04 1000 MHQ1005P2N4CT000

2.4 ±0.3nH 100 23 250 6.5 9.8 0.06 0.04 1000 MHQ1005P2N4ST000

2.5 ±0.1nH 100 23 250 6.5 10.3 0.07 0.05 900 MHQ1005P2N5BT000

2.5 ±0.2nH 100 23 250 6.5 10.3 0.07 0.05 900 MHQ1005P2N5CT000

2.5 ±0.3nH 100 23 250 6.5 10.3 0.07 0.05 900 MHQ1005P2N5ST000

2.6 ±0.1nH 100 23 250 6.5 10.1 0.07 0.05 900 MHQ1005P2N6BT000

2.6 ±0.2nH 100 23 250 6.5 10.1 0.07 0.05 900 MHQ1005P2N6CT000

2.6 ±0.3nH 100 23 250 6.5 10.1 0.07 0.05 900 MHQ1005P2N6ST000

2.7 ±0.1nH 100 23 250 6.5 9.6 0.07 0.04 900 MHQ1005P2N7BT000

2.7 ±0.2nH 100 23 250 6.5 9.6 0.07 0.04 900 MHQ1005P2N7CT000

2.7 ±0.3nH 100 23 250 6.5 9.6 0.07 0.04 900 MHQ1005P2N7ST000

2.8 ±0.1nH 100 23 250 6.5 10.3 0.08 0.05 900 MHQ1005P2N8BT000

2.8 ±0.2nH 100 23 250 6.5 10.3 0.08 0.05 900 MHQ1005P2N8CT000

2.8 ±0.3nH 100 23 250 6.5 10.3 0.08 0.05 900 MHQ1005P2N8ST000

2.9 ±0.1nH 100 23 250 6.5 9.9 0.08 0.05 900 MHQ1005P2N9BT000

2.9 ±0.2nH 100 23 250 6.5 9.9 0.08 0.05 900 MHQ1005P2N9CT000

2.9 ±0.3nH 100 23 250 6.5 9.9 0.08 0.05 900 MHQ1005P2N9ST000

3.0 ±0.1nH 100 23 250 6.0 9.4 0.08 0.06 900 MHQ1005P3N0BT000

3.0 ±0.2nH 100 23 250 6.0 9.4 0.08 0.06 900 MHQ1005P3N0CT000

3.0 ±0.3nH 100 23 250 6.0 9.4 0.08 0.06 900 MHQ1005P3N0ST000

3.1 ±0.1nH 100 23 250 6.0 10.3 0.09 0.06 900 MHQ1005P3N1BT000

3.1 ±0.2nH 100 23 250 6.0 10.3 0.09 0.06 900 MHQ1005P3N1CT000

3.1 ±0.3nH 100 23 250 6.0 10.3 0.09 0.06 900 MHQ1005P3N1ST000

3.2 ±0.1nH 100 23 250 6.0 10.0 0.09 0.07 900 MHQ1005P3N2BT000

3.2 ±0.2nH 100 23 250 6.0 10.0 0.09 0.07 900 MHQ1005P3N2CT000

3.2 ±0.3nH 100 23 250 6.0 10.0 0.09 0.07 900 MHQ1005P3N2ST000

3.3 ±0.1nH 100 23 250 6.0 9.0 0.08 0.06 900 MHQ1005P3N3BT000

3.3 ±0.2nH 100 23 250 6.0 9.0 0.08 0.06 900 MHQ1005P3N3CT000

3.3 ±0.3nH 100 23 250 6.0 9.0 0.08 0.06 900 MHQ1005P3N3ST000

3.4 ±0.1nH 100 23 250 6.0 9.0 0.09 0.06 900 MHQ1005P3N4BT000

3.4 ±0.2nH 100 23 250 6.0 9.0 0.09 0.06 900 MHQ1005P3N4CT000

3.4 ±0.3nH 100 23 250 6.0 9.0 0.09 0.06 900 MHQ1005P3N4ST000

3.5 ±0.1nH 100 23 250 5.8 8.8 0.09 0.07 900 MHQ1005P3N5BT000

3.5 ±0.2nH 100 23 250 5.8 8.8 0.09 0.07 900 MHQ1005P3N5CT000

3.5 ±0.3nH 100 23 250 5.8 8.8 0.09 0.07 900 MHQ1005P3N5ST000

3.6 ±0.1nH 100 23 250 5.5 8.4 0.09 0.07 900 MHQ1005P3N6BT000

3.6 ±0.2nH 100 23 250 5.5 8.4 0.09 0.07 900 MHQ1005P3N6CT000

3.6 ±0.3nH 100 23 250 5.5 8.4 0.09 0.07 900 MHQ1005P3N6ST000

3.7 ±0.1nH 100 23 250 5.5 8.5 0.10 0.08 900 MHQ1005P3N7BT000

3.7 ±0.2nH 100 23 250 5.5 8.5 0.10 0.08 900 MHQ1005P3N7CT000

3.7 ±0.3nH 100 23 250 5.5 8.5 0.10 0.08 900 MHQ1005P3N7ST000

Measurement item Product No. Manufacturer

L, Q 4291B+16193A Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance Type-7561 Yokogawa

(31/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ1005P Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

・Short bar residual inductance =0.556nH

○Measurement equipment

＊ Equivalent measurement equipment may be used.

LL measuring

frequency

(MHz)

min.

Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.

(nH) Tolerance min. typ. max. typ.

3.8 ±0.1nH 100 23 250 5.0 7.9 0.10 0.07 900 MHQ1005P3N8BT000

3.8 ±0.2nH 100 23 250 5.0 7.9 0.10 0.07 900 MHQ1005P3N8CT000

3.8 ±0.3nH 100 23 250 5.0 7.9 0.10 0.07 900 MHQ1005P3N8ST000

3.9 ±0.1nH 100 23 250 5.0 7.7 0.09 0.07 900 MHQ1005P3N9BT000

3.9 ±0.2nH 100 23 250 5.0 7.7 0.09 0.07 900 MHQ1005P3N9CT000

3.9 ±0.3nH 100 23 250 5.0 7.7 0.09 0.07 900 MHQ1005P3N9ST000

4.1 ±0.1nH 100 23 250 5.0 7.7 0.10 0.07 800 MHQ1005P4N1BT000

4.1 ±0.2nH 100 23 250 5.0 7.7 0.10 0.07 800 MHQ1005P4N1CT000

4.1 ±0.3nH 100 23 250 5.0 7.7 0.10 0.07 800 MHQ1005P4N1ST000

4.3 ±0.1nH 100 23 250 5.0 7.1 0.10 0.08 800 MHQ1005P4N3BT000

4.3 ±0.2nH 100 23 250 5.0 7.1 0.10 0.08 800 MHQ1005P4N3CT000

4.3 ±0.3nH 100 23 250 5.0 7.1 0.10 0.08 800 MHQ1005P4N3ST000

4.7 ±0.1nH 100 23 250 5.0 7.7 0.11 0.08 800 MHQ1005P4N7BT000

4.7 ±0.2nH 100 23 250 5.0 7.7 0.11 0.08 800 MHQ1005P4N7CT000

4.7 ±0.3nH 100 23 250 5.0 7.7 0.11 0.08 800 MHQ1005P4N7ST000

5.1 ±0.1nH 100 23 250 4.5 7.2 0.12 0.09 800 MHQ1005P5N1BT000

5.1 ±0.2nH 100 23 250 4.5 7.2 0.12 0.09 800 MHQ1005P5N1CT000

5.1 ±0.3nH 100 23 250 4.5 7.2 0.12 0.09 800 MHQ1005P5N1ST000

5.6 ±0.1nH 100 23 250 4.5 6.5 0.13 0.10 800 MHQ1005P5N6BT000

5.6 ±0.2nH 100 23 250 4.5 6.5 0.13 0.10 800 MHQ1005P5N6CT000

5.6 ±0.3nH 100 23 250 4.5 6.5 0.13 0.10 800 MHQ1005P5N6ST000

5.8 ±0.1nH 100 23 250 4.0 5.9 0.13 0.09 700 MHQ1005P5N8BT000

5.8 ±0.2nH 100 23 250 4.0 5.9 0.13 0.09 700 MHQ1005P5N8CT000

5.8 ±0.3nH 100 23 250 4.0 5.9 0.13 0.09 700 MHQ1005P5N8ST000

6.2 ±0.1nH 100 23 250 4.0 5.9 0.13 0.09 700 MHQ1005P6N2BT000

6.2 ±0.2nH 100 23 250 4.0 5.9 0.13 0.09 700 MHQ1005P6N2CT000

6.2 ±0.3nH 100 23 250 4.0 5.9 0.13 0.09 700 MHQ1005P6N2ST000

6.8 ±2% 100 23 250 4.0 5.8 0.14 0.10 700 MHQ1005P6N8GT000

6.8 ±3% 100 23 250 4.0 5.8 0.14 0.10 700 MHQ1005P6N8HT000

6.8 ±5% 100 23 250 4.0 5.8 0.14 0.10 700 MHQ1005P6N8JT000

7.3 ±2% 100 23 250 4.0 5.7 0.17 0.13 600 MHQ1005P7N3GT000

7.3 ±3% 100 23 250 4.0 5.7 0.17 0.13 600 MHQ1005P7N3HT000

7.3 ±5% 100 23 250 4.0 5.7 0.17 0.13 600 MHQ1005P7N3JT000

7.5 ±2% 100 23 250 4.0 5.6 0.16 0.12 600 MHQ1005P7N5GT000

7.5 ±3% 100 23 250 4.0 5.6 0.16 0.12 600 MHQ1005P7N5HT000

7.5 ±5% 100 23 250 4.0 5.6 0.16 0.12 600 MHQ1005P7N5JT000

8.2 ±2% 100 23 250 3.6 4.9 0.16 0.12 550 MHQ1005P8N2GT000

8.2 ±3% 100 23 250 3.6 4.9 0.16 0.12 550 MHQ1005P8N2HT000

8.2 ±5% 100 23 250 3.6 4.9 0.16 0.12 550 MHQ1005P8N2JT000

8.7 ±2% 100 23 250 3.5 4.7 0.17 0.13 550 MHQ1005P8N7GT000

8.7 ±3% 100 23 250 3.5 4.7 0.17 0.13 550 MHQ1005P8N7HT000

8.7 ±5% 100 23 250 3.5 4.7 0.17 0.13 550 MHQ1005P8N7JT000

9.1 ±2% 100 23 250 3.4 4.5 0.17 0.13 550 MHQ1005P9N1GT000

9.1 ±3% 100 23 250 3.4 4.5 0.17 0.13 550 MHQ1005P9N1HT000

9.1 ±5% 100 23 250 3.4 4.5 0.17 0.13 550 MHQ1005P9N1JT000

Measurement item Product No. Manufacturer

L, Q 4291B+16193A Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance Type-7561 Yokogawa

(32/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ1005P Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

・Short bar residual inductance =0.556nH

○Measurement equipment

＊ Equivalent measurement equipment may be used.

LL measuring

frequency

(MHz)

min.

Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.

(nH) Tolerance min. typ. max. typ.

9.5 ±2% 100 23 250 3.3 4.7 0.21 0.16 500 MHQ1005P9N5GT000

9.5 ±3% 100 23 250 3.3 4.7 0.21 0.16 500 MHQ1005P9N5HT000

9.5 ±5% 100 23 250 3.3 4.7 0.21 0.16 500 MHQ1005P9N5JT000

10 ±2% 100 23 250 3.3 4.6 0.19 0.15 500 MHQ1005P10NGT000

10 ±3% 100 23 250 3.3 4.6 0.19 0.15 500 MHQ1005P10NHT000

10 ±5% 100 23 250 3.3 4.6 0.19 0.15 500 MHQ1005P10NJT000

11 ±2% 100 23 250 3.0 4.2 0.24 0.20 450 MHQ1005P11NGT000

11 ±3% 100 23 250 3.0 4.2 0.24 0.20 450 MHQ1005P11NHT000

11 ±5% 100 23 250 3.0 4.2 0.24 0.20 450 MHQ1005P11NJT000

12 ±2% 100 23 250 2.8 3.8 0.24 0.19 450 MHQ1005P12NGT000

12 ±3% 100 23 250 2.8 3.8 0.24 0.19 450 MHQ1005P12NHT000

12 ±5% 100 23 250 2.8 3.8 0.24 0.19 450 MHQ1005P12NJT000

13 ±2% 100 23 250 2.5 3.5 0.26 0.20 420 MHQ1005P13NGT000

13 ±3% 100 23 250 2.5 3.5 0.26 0.20 420 MHQ1005P13NHT000

13 ±5% 100 23 250 2.5 3.5 0.26 0.20 420 MHQ1005P13NJT000

15 ±2% 100 23 250 2.3 3.2 0.28 0.22 400 MHQ1005P15NGT000

15 ±3% 100 23 250 2.3 3.2 0.28 0.22 400 MHQ1005P15NHT000

15 ±5% 100 23 250 2.3 3.2 0.28 0.22 400 MHQ1005P15NJT000

16 ±2% 100 20 250 2.3 3.5 0.80 0.57 260 MHQ1005P16NGT000

16 ±3% 100 20 250 2.3 3.5 0.80 0.57 260 MHQ1005P16NHT000

16 ±5% 100 20 250 2.3 3.5 0.80 0.57 260 MHQ1005P16NJT000

18 ±2% 100 22 250 2.3 3.4 0.80 0.48 260 MHQ1005P18NGT000

18 ±3% 100 22 250 2.3 3.4 0.80 0.48 260 MHQ1005P18NHT000

18 ±5% 100 22 250 2.3 3.4 0.80 0.48 260 MHQ1005P18NJT000

19 ±2% 100 20 250 2.3 3.2 0.80 0.46 260 MHQ1005P19NGT000

19 ±3% 100 20 250 2.3 3.2 0.80 0.46 260 MHQ1005P19NHT000

19 ±5% 100 20 250 2.3 3.2 0.80 0.46 260 MHQ1005P19NJT000

20 ±2% 100 20 250 2.1 3.1 1.10 0.46 260 MHQ1005P20NGT000

20 ±3% 100 20 250 2.1 3.1 1.10 0.46 260 MHQ1005P20NHT000

20 ±5% 100 20 250 2.1 3.1 1.10 0.46 260 MHQ1005P20NJT000

22 ±2% 100 20 250 2.1 2.9 1.10 0.66 230 MHQ1005P22NGT000

22 ±3% 100 20 250 2.1 2.9 1.10 0.66 230 MHQ1005P22NHT000

22 ±5% 100 20 250 2.1 2.9 1.10 0.66 230 MHQ1005P22NJT000

23 ±2% 100 22 250 2.0 2.9 1.10 0.62 230 MHQ1005P23NGT000

23 ±3% 100 22 250 2.0 2.9 1.10 0.62 230 MHQ1005P23NHT000

23 ±5% 100 22 250 2.0 2.9 1.10 0.62 230 MHQ1005P23NJT000

24 ±2% 100 20 250 2.0 2.8 1.20 0.55 230 MHQ1005P24NGT000

24 ±3% 100 20 250 2.0 2.8 1.20 0.55 230 MHQ1005P24NHT000

24 ±5% 100 20 250 2.0 2.8 1.20 0.55 230 MHQ1005P24NJT000

27 ±2% 100 20 250 1.7 2.6 1.30 0.66 230 MHQ1005P27NGT000

27 ±3% 100 20 250 1.7 2.6 1.30 0.66 230 MHQ1005P27NHT000

27 ±5% 100 20 250 1.7 2.6 1.30 0.66 230 MHQ1005P27NJT000

30 ±2% 100 20 250 1.7 2.4 1.30 0.80 220 MHQ1005P30NGT000

30 ±3% 100 20 250 1.7 2.4 1.30 0.80 220 MHQ1005P30NHT000

30 ±5% 100 20 250 1.7 2.4 1.30 0.80 220 MHQ1005P30NJT000

Measurement item Product No. Manufacturer

L, Q 4291B+16193A Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance Type-7561 Yokogawa

(33/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ1005P Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

・Short bar residual inductance =0.556nH

○Measurement equipment

＊ Equivalent measurement equipment may be used.

LL measuring

frequency

(MHz)

min.

Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.

(nH) Tolerance min. typ. max. typ.

33 ±2% 100 20 250 1.6 2.3 1.50 0.74 220 MHQ1005P33NGT000

33 ±3% 100 20 250 1.6 2.3 1.50 0.74 220 MHQ1005P33NHT000

33 ±5% 100 20 250 1.6 2.3 1.50 0.74 220 MHQ1005P33NJT000

36 ±2% 100 20 250 1.6 2.2 1.50 0.92 190 MHQ1005P36NGT000

36 ±3% 100 20 250 1.6 2.2 1.50 0.92 190 MHQ1005P36NHT000

36 ±5% 100 20 250 1.6 2.2 1.50 0.92 190 MHQ1005P36NJT000

39 ±2% 100 20 250 1.4 2.1 1.50 0.95 190 MHQ1005P39NGT000

39 ±3% 100 20 250 1.4 2.1 1.50 0.95 190 MHQ1005P39NHT000

39 ±5% 100 20 250 1.4 2.1 1.50 0.95 190 MHQ1005P39NJT000

40 ±2% 100 20 250 1.4 2.1 1.50 1.12 190 MHQ1005P40NGT000

40 ±3% 100 20 250 1.4 2.1 1.50 1.12 190 MHQ1005P40NHT000

40 ±5% 100 20 250 1.4 2.1 1.50 1.12 190 MHQ1005P40NJT000

43 ±2% 100 22 250 1.4 2.0 1.60 1.06 190 MHQ1005P43NGT000

43 ±3% 100 22 250 1.4 2.0 1.60 1.06 190 MHQ1005P43NHT000

43 ±5% 100 22 250 1.4 2.0 1.60 1.06 190 MHQ1005P43NJT000

47 ±2% 100 22 250 1.3 1.9 1.60 1.09 190 MHQ1005P47NGT000

47 ±3% 100 22 250 1.3 1.9 1.60 1.09 190 MHQ1005P47NHT000

47 ±5% 100 22 250 1.3 1.9 1.60 1.09 190 MHQ1005P47NJT000

51 ±2% 100 22 250 1.3 1.8 1.80 1.17 190 MHQ1005P51NGT000

51 ±3% 100 22 250 1.3 1.8 1.80 1.17 190 MHQ1005P51NHT000

51 ±5% 100 22 250 1.3 1.8 1.80 1.17 190 MHQ1005P51NJT000

56 ±2% 100 22 250 1.2 1.8 1.80 1.22 180 MHQ1005P56NGT000

56 ±3% 100 22 250 1.2 1.8 1.80 1.22 180 MHQ1005P56NHT000

56 ±5% 100 22 250 1.2 1.8 1.80 1.22 180 MHQ1005P56NJT000

62 ±2% 100 22 250 1.1 1.6 1.90 1.36 180 MHQ1005P62NGT000

62 ±3% 100 22 250 1.1 1.6 1.90 1.36 180 MHQ1005P62NHT000

62 ±5% 100 22 250 1.1 1.6 1.90 1.36 180 MHQ1005P62NJT000

68 ±2% 100 22 250 1.1 1.6 2.00 1.43 160 MHQ1005P68NGT000

68 ±3% 100 22 250 1.1 1.6 2.00 1.43 160 MHQ1005P68NHT000

68 ±5% 100 22 250 1.1 1.6 2.00 1.43 160 MHQ1005P68NJT000

72 ±2% 100 22 250 1.1 1.5 2.20 1.62 160 MHQ1005P72NGT000

72 ±3% 100 22 250 1.1 1.5 2.20 1.62 160 MHQ1005P72NHT000

72 ±5% 100 22 250 1.1 1.5 2.20 1.62 160 MHQ1005P72NJT000

75 ±2% 100 22 250 1.1 1.5 2.20 1.53 160 MHQ1005P75NGT000

75 ±3% 100 22 250 1.1 1.5 2.20 1.53 160 MHQ1005P75NHT000

75 ±5% 100 22 250 1.1 1.5 2.20 1.53 160 MHQ1005P75NJT000

82 ±2% 100 22 250 0.9 1.5 2.30 1.61 160 MHQ1005P82NGT000

82 ±3% 100 22 250 0.9 1.5 2.30 1.61 160 MHQ1005P82NHT000

82 ±5% 100 22 250 0.9 1.5 2.30 1.61 160 MHQ1005P82NJT000

91 ±2% 100 23 250 0.9 1.4 2.30 1.78 160 MHQ1005P91NGT000

91 ±3% 100 23 250 0.9 1.4 2.30 1.78 160 MHQ1005P91NHT000

91 ±5% 100 23 250 0.9 1.4 2.30 1.78 160 MHQ1005P91NJT000

100 ±2% 100 23 250 0.9 1.2 2.50 1.80 150 MHQ1005PR10GT000

100 ±3% 100 23 250 0.9 1.2 2.50 1.80 150 MHQ1005PR10HT000

100 ±5% 100 23 250 0.9 1.2 2.50 1.80 150 MHQ1005PR10JT000

Measurement item Product No. Manufacturer

L, Q 4291B+16193A Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance Type-7561 Yokogawa

(34/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ1005P Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

・Short bar residual inductance =0.556nH

○Measurement equipment

＊ Equivalent measurement equipment may be used.

LL measuring

frequency

(MHz)

min.

Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.

(nH) Tolerance min. typ. max. typ.

110 ±2% 100 22 250 0.8 1.2 2.70 1.98 150 MHQ1005PR11GT000

110 ±3% 100 22 250 0.8 1.2 2.70 1.98 150 MHQ1005PR11HT000

110 ±5% 100 22 250 0.8 1.2 2.70 1.98 150 MHQ1005PR11JT000

120 ±2% 100 22 250 0.8 1.2 2.70 1.81 140 MHQ1005PR12GT000

120 ±3% 100 22 250 0.8 1.2 2.70 1.81 140 MHQ1005PR12HT000

120 ±5% 100 22 250 0.8 1.2 2.70 1.81 140 MHQ1005PR12JT000

130 ±2% 100 22 250 0.8 1.1 2.90 2.18 110 MHQ1005PR13GT000

130 ±3% 100 22 250 0.8 1.1 2.90 2.18 110 MHQ1005PR13HT000

130 ±5% 100 22 250 0.8 1.1 2.90 2.18 110 MHQ1005PR13JT000

150 ±2% 100 22 250 0.8 1.0 3.00 2.03 110 MHQ1005PR15GT000

150 ±3% 100 22 250 0.8 1.0 3.00 2.03 110 MHQ1005PR15HT000

150 ±5% 100 22 250 0.8 1.0 3.00 2.03 110 MHQ1005PR15JT000

Measurement item Product No. Manufacturer

L, Q 4291B+16193A Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance Type-7561 Yokogawa

(35/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ1005P Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

0.7 0.7 0.7 0.7 0.7 71min. 90min. 139min. 148min. 177min. MHQ1005P0N7BT000

0.7 0.7 0.7 0.7 0.7 71min. 90min. 139min. 148min. 177min. MHQ1005P0N7CT000

0.8 0.8 0.8 0.8 0.8 71min. 90min. 139min. 148min. 177min. MHQ1005P0N8BT000

0.8 0.8 0.8 0.8 0.8 71min. 90min. 139min. 148min. 177min. MHQ1005P0N8CT000

0.9 0.9 0.9 0.9 0.9 71min. 90min. 139min. 148min. 177min. MHQ1005P0N9BT000

0.9 0.9 0.9 0.9 0.9 71min. 90min. 139min. 148min. 177min. MHQ1005P0N9CT000

1.0 1.0 1.0 1.0 1.0 71min. 90min. 139min. 148min. 177min. MHQ1005P1N0BT000

1.0 1.0 1.0 1.0 1.0 71min. 90min. 139min. 148min. 177min. MHQ1005P1N0CT000

1.0 1.0 1.0 1.0 1.0 71min. 90min. 139min. 148min. 177min. MHQ1005P1N0ST000

1.1 1.1 1.1 1.1 1.1 71min. 90min. 139min. 148min. 177min. MHQ1005P1N1BT000

1.1 1.1 1.1 1.1 1.1 71min. 90min. 139min. 148min. 177min. MHQ1005P1N1CT000

1.1 1.1 1.1 1.1 1.1 71min. 90min. 139min. 148min. 177min. MHQ1005P1N1ST000

1.2 1.2 1.2 1.2 1.2 71min. 90min. 139min. 148min. 177min. MHQ1005P1N2BT000

1.2 1.2 1.2 1.2 1.2 71min. 90min. 139min. 148min. 177min. MHQ1005P1N2CT000

1.2 1.2 1.2 1.2 1.2 71min. 90min. 139min. 148min. 177min. MHQ1005P1N2ST000

1.3 1.3 1.3 1.3 1.3 71 90 139 148 178 MHQ1005P1N3BT000

1.3 1.3 1.3 1.3 1.3 71 90 139 148 178 MHQ1005P1N3CT000

1.3 1.3 1.3 1.3 1.3 71 90 139 148 178 MHQ1005P1N3ST000

1.4 1.4 1.4 1.4 1.4 88 103 173 178 203 MHQ1005P1N4BT000

1.4 1.4 1.4 1.4 1.4 88 103 173 178 203 MHQ1005P1N4CT000

1.4 1.4 1.4 1.4 1.4 88 103 173 178 203 MHQ1005P1N4ST000

1.5 1.5 1.5 1.5 1.5 66 76 124 133 151 MHQ1005P1N5BT000

1.5 1.5 1.5 1.5 1.5 66 76 124 133 151 MHQ1005P1N5CT000

1.5 1.5 1.5 1.5 1.5 66 76 124 133 151 MHQ1005P1N5ST000

1.6 1.6 1.6 1.6 1.6 70 88 147 151 171 MHQ1005P1N6BT000

1.6 1.6 1.6 1.6 1.6 70 88 147 151 171 MHQ1005P1N6CT000

1.6 1.6 1.6 1.6 1.6 70 88 147 151 171 MHQ1005P1N6ST000

1.7 1.7 1.7 1.7 1.7 63 80 140 151 179 MHQ1005P1N7BT000

1.7 1.7 1.7 1.7 1.7 63 80 140 151 179 MHQ1005P1N7CT000

1.7 1.7 1.7 1.7 1.7 63 80 140 151 179 MHQ1005P1N7ST000

1.8 1.8 1.8 1.8 1.8 60 75 125 130 150 MHQ1005P1N8BT000

1.8 1.8 1.8 1.8 1.8 60 75 125 130 150 MHQ1005P1N8CT000

1.8 1.8 1.8 1.8 1.8 60 75 125 130 150 MHQ1005P1N8ST000

1.9 1.9 1.9 1.9 1.9 53 68 119 126 150 MHQ1005P1N9BT000

1.9 1.9 1.9 1.9 1.9 53 68 119 126 150 MHQ1005P1N9CT000

1.9 1.9 1.9 1.9 1.9 53 68 119 126 150 MHQ1005P1N9ST000

2.0 2.0 2.0 2.0 2.0 60 74 122 129 146 MHQ1005P2N0BT000

2.0 2.0 2.0 2.0 2.0 60 74 122 129 146 MHQ1005P2N0CT000

2.0 2.0 2.0 2.0 2.0 60 74 122 129 146 MHQ1005P2N0ST000

2.1 2.1 2.1 2.1 2.1 54 70 121 129 152 MHQ1005P2N1BT000

2.1 2.1 2.1 2.1 2.1 54 70 121 129 152 MHQ1005P2N1CT000

2.1 2.1 2.1 2.1 2.1 54 70 121 129 152 MHQ1005P2N1ST000

2.2 2.2 2.2 2.2 2.2 54 68 108 116 131 MHQ1005P2N2BT000

2.2 2.2 2.2 2.2 2.2 54 68 108 116 131 MHQ1005P2N2CT000

2.2 2.2 2.2 2.2 2.2 54 68 108 116 131 MHQ1005P2N2ST000

Product No. Manufacturer

4291B+16193A Agilent Technologies

(36/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ1005P Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

2.3 2.3 2.3 2.3 2.3 50 64 101 106 119 MHQ1005P2N3BT000

2.3 2.3 2.3 2.3 2.3 50 64 101 106 119 MHQ1005P2N3CT000

2.3 2.3 2.3 2.3 2.3 50 64 101 106 119 MHQ1005P2N3ST000

2.4 2.3 2.4 2.4 2.4 50 64 105 110 125 MHQ1005P2N4BT000

2.4 2.3 2.4 2.4 2.4 50 64 105 110 125 MHQ1005P2N4CT000

2.4 2.3 2.4 2.4 2.4 50 64 105 110 125 MHQ1005P2N4ST000

2.5 2.5 2.5 2.5 2.6 50 65 110 114 135 MHQ1005P2N5BT000

2.5 2.5 2.5 2.5 2.6 50 65 110 114 135 MHQ1005P2N5CT000

2.5 2.5 2.5 2.5 2.6 50 65 110 114 135 MHQ1005P2N5ST000

2.5 2.5 2.6 2.6 2.7 48 65 103 107 122 MHQ1005P2N6BT000

2.5 2.5 2.6 2.6 2.7 48 65 103 107 122 MHQ1005P2N6CT000

2.5 2.5 2.6 2.6 2.7 48 65 103 107 122 MHQ1005P2N6ST000

2.6 2.6 2.7 2.7 2.8 49 61 98 102 116 MHQ1005P2N7BT000

2.6 2.6 2.7 2.7 2.8 49 61 98 102 116 MHQ1005P2N7CT000

2.6 2.6 2.7 2.7 2.8 49 61 98 102 116 MHQ1005P2N7ST000

2.7 2.7 2.8 2.8 2.9 46 58 100 105 123 MHQ1005P2N8BT000

2.7 2.7 2.8 2.8 2.9 46 58 100 105 123 MHQ1005P2N8CT000

2.7 2.7 2.8 2.8 2.9 46 58 100 105 123 MHQ1005P2N8ST000

2.8 2.8 2.9 2.9 3.0 45 58 99 103 120 MHQ1005P2N9BT000

2.8 2.8 2.9 2.9 3.0 45 58 99 103 120 MHQ1005P2N9CT000

2.8 2.8 2.9 2.9 3.0 45 58 99 103 120 MHQ1005P2N9ST000

2.9 2.9 3.0 3.0 3.1 49 62 102 106 120 MHQ1005P3N0BT000

2.9 2.9 3.0 3.0 3.1 49 62 102 106 120 MHQ1005P3N0CT000

2.9 2.9 3.0 3.0 3.1 49 62 102 106 120 MHQ1005P3N0ST000

3.0 3.0 3.1 3.1 3.2 45 58 99 104 121 MHQ1005P3N1BT000

3.0 3.0 3.1 3.1 3.2 45 58 99 104 121 MHQ1005P3N1CT000

3.0 3.0 3.1 3.1 3.2 45 58 99 104 121 MHQ1005P3N1ST000

3.1 3.1 3.2 3.2 3.3 45 58 99 106 121 MHQ1005P3N2BT000

3.1 3.1 3.2 3.2 3.3 45 58 99 106 121 MHQ1005P3N2CT000

3.1 3.1 3.2 3.2 3.3 45 58 99 106 121 MHQ1005P3N2ST000

3.2 3.2 3.3 3.4 3.4 48 60 96 101 115 MHQ1005P3N3BT000

3.2 3.2 3.3 3.4 3.4 48 60 96 101 115 MHQ1005P3N3CT000

3.2 3.2 3.3 3.4 3.4 48 60 96 101 115 MHQ1005P3N3ST000

3.3 3.3 3.4 3.5 3.5 45 57 96 102 118 MHQ1005P3N4BT000

3.3 3.3 3.4 3.5 3.5 45 57 96 102 118 MHQ1005P3N4CT000

3.3 3.3 3.4 3.5 3.5 45 57 96 102 118 MHQ1005P3N4ST000

3.4 3.4 3.5 3.6 3.6 43 57 89 92 104 MHQ1005P3N5BT000

3.4 3.4 3.5 3.6 3.6 43 57 89 92 104 MHQ1005P3N5CT000

3.4 3.4 3.5 3.6 3.6 43 57 89 92 104 MHQ1005P3N5ST000

3.5 3.5 3.6 3.6 3.7 43 56 91 96 110 MHQ1005P3N6BT000

3.5 3.5 3.6 3.6 3.7 43 56 91 96 110 MHQ1005P3N6CT000

3.5 3.5 3.6 3.6 3.7 43 56 91 96 110 MHQ1005P3N6ST000

3.6 3.6 3.7 3.8 3.9 46 57 96 100 114 MHQ1005P3N7BT000

3.6 3.6 3.7 3.8 3.9 46 57 96 100 114 MHQ1005P3N7CT000

3.6 3.6 3.7 3.8 3.9 46 57 96 100 114 MHQ1005P3N7ST000

3.7 3.7 3.9 3.9 4.0 45 59 93 96 109 MHQ1005P3N8BT000

3.7 3.7 3.9 3.9 4.0 45 59 93 96 109 MHQ1005P3N8CT000

3.7 3.7 3.9 3.9 4.0 45 59 93 96 109 MHQ1005P3N8ST000

Product No. Manufacturer

4291B+16193A Agilent Technologies

(37/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ1005P Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

3.8 3.8 4.0 4.0 4.1 48 61 96 99 111 MHQ1005P3N9BT000

3.8 3.8 4.0 4.0 4.1 48 61 96 99 111 MHQ1005P3N9CT000

3.8 3.8 4.0 4.0 4.1 48 61 96 99 111 MHQ1005P3N9ST000

4.0 4.0 4.2 4.3 4.4 46 59 98 101 115 MHQ1005P4N1BT000

4.0 4.0 4.2 4.3 4.4 46 59 98 101 115 MHQ1005P4N1CT000

4.0 4.0 4.2 4.3 4.4 46 59 98 101 115 MHQ1005P4N1ST000

4.2 4.2 4.4 4.5 4.6 47 60 95 97 107 MHQ1005P4N3BT000

4.2 4.2 4.4 4.5 4.6 47 60 95 97 107 MHQ1005P4N3CT000

4.2 4.2 4.4 4.5 4.6 47 60 95 97 107 MHQ1005P4N3ST000

4.6 4.6 4.8 4.9 5.0 44 56 89 93 102 MHQ1005P4N7BT000

4.6 4.6 4.8 4.9 5.0 44 56 89 93 102 MHQ1005P4N7CT000

4.6 4.6 4.8 4.9 5.0 44 56 89 93 102 MHQ1005P4N7ST000

5.0 5.0 5.2 5.3 5.5 43 55 86 90 99 MHQ1005P5N1BT000

5.0 5.0 5.2 5.3 5.5 43 55 86 90 99 MHQ1005P5N1CT000

5.0 5.0 5.2 5.3 5.5 43 55 86 90 99 MHQ1005P5N1ST000

5.5 5.5 5.8 5.9 6.1 43 54 84 87 94 MHQ1005P5N6BT000

5.5 5.5 5.8 5.9 6.1 43 54 84 87 94 MHQ1005P5N6CT000

5.5 5.5 5.8 5.9 6.1 43 54 84 87 94 MHQ1005P5N6ST000

5.7 5.7 6.1 6.2 6.5 43 57 84 87 94 MHQ1005P5N8BT000

5.7 5.7 6.1 6.2 6.5 43 57 84 87 94 MHQ1005P5N8CT000

5.7 5.7 6.1 6.2 6.5 43 57 84 87 94 MHQ1005P5N8ST000

6.1 6.1 6.6 6.7 7.0 45 57 85 87 93 MHQ1005P6N2BT000

6.1 6.1 6.6 6.7 7.0 45 57 85 87 93 MHQ1005P6N2CT000

6.1 6.1 6.6 6.7 7.0 45 57 85 87 93 MHQ1005P6N2ST000

6.7 6.7 7.3 7.5 7.9 45 58 85 88 92 MHQ1005P6N8GT000

6.7 6.7 7.3 7.5 7.9 45 58 85 88 92 MHQ1005P6N8HT000

6.7 6.7 7.3 7.5 7.9 45 58 85 88 92 MHQ1005P6N8JT000

7.1 7.2 7.7 7.9 8.3 40 52 77 80 84 MHQ1005P7N3GT000

7.1 7.2 7.7 7.9 8.3 40 52 77 80 84 MHQ1005P7N3HT000

7.1 7.2 7.7 7.9 8.3 40 52 77 80 84 MHQ1005P7N3JT000

7.3 7.4 7.9 8.1 8.5 42 54 80 83 88 MHQ1005P7N5GT000

7.3 7.4 7.9 8.1 8.5 42 54 80 83 88 MHQ1005P7N5HT000

7.3 7.4 7.9 8.1 8.5 42 54 80 83 88 MHQ1005P7N5JT000

8.0 8.1 9.0 9.4 10.0 44 56 80 81 82 MHQ1005P8N2GT000

8.0 8.1 9.0 9.4 10.0 44 56 80 81 82 MHQ1005P8N2HT000

8.0 8.1 9.0 9.4 10.0 44 56 80 81 82 MHQ1005P8N2JT000

8.5 8.6 9.6 10.0 10.8 42 52 78 79 80 MHQ1005P8N7GT000

8.5 8.6 9.6 10.0 10.8 42 52 78 79 80 MHQ1005P8N7HT000

8.5 8.6 9.6 10.0 10.8 42 52 78 79 80 MHQ1005P8N7JT000

8.9 9.1 10.1 10.5 11.3 43 54 77 78 79 MHQ1005P9N1GT000

8.9 9.1 10.1 10.5 11.3 43 54 77 78 79 MHQ1005P9N1HT000

8.9 9.1 10.1 10.5 11.3 43 54 77 78 79 MHQ1005P9N1JT000

Product No. Manufacturer

4291B+16193A Agilent Technologies

(38/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ1005P Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

9.3 9.4 10.6 11.1 12.0 42 54 75 75 75 MHQ1005P9N5GT000

9.3 9.4 10.6 11.1 12.0 42 54 75 75 75 MHQ1005P9N5HT000

9.3 9.4 10.6 11.1 12.0 42 54 75 75 75 MHQ1005P9N5JT000

10 10 11 12 13 42 54 73 74 74 MHQ1005P10NGT000

10 10 11 12 13 42 54 73 74 74 MHQ1005P10NHT000

10 10 11 12 13 42 54 73 74 74 MHQ1005P10NJT000

11 11 13 13 14 41 52 70 70 69 MHQ1005P11NGT000

11 11 13 13 14 41 52 70 70 69 MHQ1005P11NHT000

11 11 13 13 14 41 52 70 70 69 MHQ1005P11NJT000

12 12 14 15 17 40 50 66 65 61 MHQ1005P12NGT000

12 12 14 15 17 40 50 66 65 61 MHQ1005P12NHT000

12 12 14 15 17 40 50 66 65 61 MHQ1005P12NJT000

13 13 16 17 19 42 53 66 66 61 MHQ1005P13NGT000

13 13 16 17 19 42 53 66 66 61 MHQ1005P13NHT000

13 13 16 17 19 42 53 66 66 61 MHQ1005P13NJT000

15 15 19 21 26 39 48 57 54 46 MHQ1005P15NGT000

15 15 19 21 26 39 48 57 54 46 MHQ1005P15NHT000

15 15 19 21 26 39 48 57 54 46 MHQ1005P15NJT000

16 16 20 21 25 34 43 54 52 49 MHQ1005P16NGT000

16 16 20 21 25 34 43 54 52 49 MHQ1005P16NHT000

16 16 20 21 25 34 43 54 52 49 MHQ1005P16NJT000

18 18 23 25 30 39 49 60 57 51 MHQ1005P18NGT000

18 18 23 25 30 39 49 60 57 51 MHQ1005P18NHT000

18 18 23 25 30 39 49 60 57 51 MHQ1005P18NJT000

19 19 25 28 35 39 49 59 55 46 MHQ1005P19NGT000

19 19 25 28 35 39 49 59 55 46 MHQ1005P19NHT000

19 19 25 28 35 39 49 59 55 46 MHQ1005P19NJT000

20 20 26 29 35 38 47 56 53 43 MHQ1005P20NGT000

20 20 26 29 35 38 47 56 53 43 MHQ1005P20NHT000

20 20 26 29 35 38 47 56 53 43 MHQ1005P20NJT000

22 23 31 35 — 34 42 47 43 — MHQ1005P22NGT000

22 23 31 35 —34 42 47 43 —MHQ1005P22NHT000

22 23 31 35 — 34 42 47 43 — MHQ1005P22NJT000

23 24 33 37 —41 50 53 48 —MHQ1005P23NGT000

23 24 33 37 — 41 50 53 48 — MHQ1005P23NHT000

23 24 33 37 —41 50 53 48 —MHQ1005P23NJT000

24 25 35 41 — 39 49 50 44 — MHQ1005P24NGT000

24 25 35 41 —39 49 50 44 —MHQ1005P24NHT000

24 25 35 41 — 39 49 50 44 — MHQ1005P24NJT000

27 28 42 50 —37 45 44 37 —MHQ1005P27NGT000

27 28 42 50 — 37 45 44 37 — MHQ1005P27NHT000

27 28 42 50 —37 45 44 37 —MHQ1005P27NJT000

30 32 55 — — 33 40 34 — — MHQ1005P30NGT000

30 32 55 — — 33 40 34 — — MHQ1005P30NHT000

30 32 55 — — 33 40 34 — — MHQ1005P30NJT000

Product No. Manufacturer

4291B+16193A Agilent Technologies

(39/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ1005P Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

33 35 59 — — 37 44 37 — — MHQ1005P33NGT000

33 35 59 — — 37 44 37 — — MHQ1005P33NHT000

33 35 59 — — 37 44 37 — — MHQ1005P33NJT000

36 39 69 — — 35 42 32 — — MHQ1005P36NGT000

36 39 69 — — 35 42 32 — — MHQ1005P36NHT000

36 39 69 — — 35 42 32 — — MHQ1005P36NJT000

40 43 — — — 33 38 — — — MHQ1005P39NGT000

40 43 ——— 33 38 ——— MHQ1005P39NHT000

40 43 — — — 33 38 — — — MHQ1005P39NJT000

41 44 ——— 36 42 ——— MHQ1005P40NGT000

41 44 — — — 36 42 — — — MHQ1005P40NHT000

41 44 ——— 36 42 ——— MHQ1005P40NJT000

44 47 — — — 36 42 — — — MHQ1005P43NGT000

44 47 ——— 36 42 ——— MHQ1005P43NHT000

44 47 — — — 36 42 — — — MHQ1005P43NJT000

48 53 ——— 34 38 ——— MHQ1005P47NGT000

48 53 — — — 34 38 — — — MHQ1005P47NHT000

48 53 ——— 34 38 ——— MHQ1005P47NJT000

52 58 — — — 35 40 — — — MHQ1005P51NGT000

52 58 ——— 35 40 ——— MHQ1005P51NHT000

52 58 — — — 35 40 — — — MHQ1005P51NJT000

58 65 ——— 34 37 ——— MHQ1005P56NGT000

58 65 — — — 34 37 — — — MHQ1005P56NHT000

58 65 ——— 34 37 ——— MHQ1005P56NJT000

65 74 — — — 34 37 — — — MHQ1005P62NGT000

65 74 ——— 34 37 ——— MHQ1005P62NHT000

65 74 — — — 34 37 — — — MHQ1005P62NJT000

72 82 ——— 35 37 ——— MHQ1005P68NGT000

72 82 — — — 35 37 — — — MHQ1005P68NHT000

72 82 ——— 35 37 ——— MHQ1005P68NJT000

77 90 — — — 34 36 — — — MHQ1005P72NGT000

77 90 ——— 34 36 ——— MHQ1005P72NHT000

77 90 — — — 34 36 — — — MHQ1005P72NJT000

80 93 ——— 35 37 ——— MHQ1005P75NGT000

80 93 — — — 35 37 — — — MHQ1005P75NHT000

80 93 ——— 35 37 ——— MHQ1005P75NJT000

88 107 — — — 35 35 — — — MHQ1005P82NGT000

88 107 ——— 35 35 ——— MHQ1005P82NHT000

88 107 — — — 35 35 — — — MHQ1005P82NJT000

98 121 ——— 33 32 ——— MHQ1005P91NGT000

98 121 — — — 33 32 — — — MHQ1005P91NHT000

98 121 ——— 33 32 ——— MHQ1005P91NJT000

111 143 — — — 33 33 — — — MHQ1005PR10GT000

111 143 ——— 33 33 ——— MHQ1005PR10HT000

111 143 — — — 33 33 — — — MHQ1005PR10JT000

Product No. Manufacturer

4291B+16193A Agilent Technologies

(40/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ1005P Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

124 169 — — — 31 28 — — — MHQ1005PR11GT000

124 169 ——— 31 28 ——— MHQ1005PR11HT000

124 169 — — — 31 28 — — — MHQ1005PR11JT000

138 197 ——— 30 26 ——— MHQ1005PR12GT000

138 197 — — — 30 26 — — — MHQ1005PR12HT000

138 197 ——— 30 26 ——— MHQ1005PR12JT000

150 220 — — — 31 23 — — — MHQ1005PR13GT000

150 220 ——— 31 23 ——— MHQ1005PR13HT000

150 220 — — — 31 23 — — — MHQ1005PR13JT000

177 276 ——— 30 22 ——— MHQ1005PR15GT000

177 276 — — — 30 22 — — — MHQ1005PR15HT000

177 276 ——— 30 22 ——— MHQ1005PR15JT000

Product No. Manufacturer

4291B+16193A Agilent Technologies

(41/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ1005PType

ELECTRICAL CHARACTERISTICS

L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)

○Measurement equipment

＊ Equivalent measurement equipment may be used.

10 100 1000 10000

1000

100

Frequency (MHz)

Inductance (nH)

R15 R12

R10

82N

68N

56N

47N

39N 33N

27N

22N

18N

15N

12N

10N

8N2

3N3

2N7

2N2

1N8

1N5

1N2

6N8

5N6

4N7

3N9

Product No. Manufacturer

E4991+16193A Agilent Technologies

(42/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries MHQ1005P Type

ELECTRICAL CHARACTERISTICS

Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)

○Measurement equipment

＊ Equivalent measurement equipment may be used.

120

160

200

100

140

180

10 100 1000 10000

Frequency (MHz)

R15

R12

R10

82N

68N

56N

47N 39N

33N

27N

22N

18N

15N

12N

10N

8N2

3N3

2N7

2N2

1N8

1N5

1N2

6N8

5N6

4N7

3N9

Product No. Manufacturer

E4991+16193A Agilent Technologies

(43/43)

INDUCTORS

20141029 / inductor_commercial_high-frequency_mhq_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

MHQ-Pseries

Packaging Style

REEL DIMENSIONS

TAPE DIMENSIONS

1.0

ø180±2.0

2.0±0.5

ø13±0.2

ø21±0.8

ø60min.

14.4max.

Dimensions in mm

8.4 +2.0

–0.0

8.0±0.3 3.5±0.05

1.75±0.1

4.0±0.1

1.5 +0.1

–0.0

Sprocket hole Cavity

2.0±0.05 2.0±0.05

160min. Taping 200min.

300min.

Drawing direction

Type A B K

MHQ0402P 0.48±0.02 0.28±0.02 0.40 max.

MHQ0603P 0.74±0.05 0.44±0.05 0.60 max.

MHQ1005P 1.15±0.10 0.75±0.10 0.8 max.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

TDK:

MHQ1005PR15GT000 MHQ1005PR15GTD25 MHQ1005PR15HT000 MHQ1005PR15JT000 MHQ1005PR15JTD25

MHQ1005P10NJT MHQ1005P12NJT MHQ1005P15NJT MHQ1005P1N0ST MHQ1005P1N1ST MHQ1005P1N2ST

MHQ1005P1N3ST MHQ1005P1N5ST MHQ1005P1N6ST MHQ1005P1N8ST MHQ1005P2N0ST

MHQ1005P2N2ST MHQ1005P2N4ST MHQ1005P2N7ST MHQ1005P3N0ST MHQ1005P3N3ST MHQ1005P3N6ST

MHQ1005P3N9ST MHQ1005P4N3ST MHQ1005P4N7ST MHQ1005P5N1ST MHQ1005P5N6ST

MHQ1005P6N2ST MHQ1005P6N8JT MHQ1005P7N5JT MHQ1005P8N2JT MHQ1005P9N1JT

MHQ1005P10NHT000 MHQ1005P2N2CTD25 MHQ1005P4N3STD25 MHQ1005P4N7CT000 MHQ1005P6N8HTD25

MHQ1005P6N2CTD25 MHQ1005P1N3CTD25 MHQ1005P1N0BTD25 MHQ1005P7N5HT000

MHQ1005P7N5JTD25 MHQ1005P5N6CT000 MHQ1005P3N0CT000 MHQ1005P3N3BTD25 MHQ1005P5N1BTD25

MHQ1005P2N0BTD25 MHQ1005P1N3STD25 MHQ1005P6N2STD25 MHQ1005P1N8CT000 MHQ1005P9N1HTD25

MHQ1005P1N1BTD25 MHQ1005P2N4BT000 MHQ1005P3N3CTD25 MHQ1005P3N0BTD25 MHQ1005P2N7CT000

MHQ1005P9N1GT000 MHQ1005P7N5GTD25 MHQ1005P4N7BTD25 MHQ1005P3N6CT000 MHQ1005P1N5BT000

MHQ1005P1N2STD25 MHQ1005P1N6CT000 MHQ1005P2N7BTD25 MHQ1005P12NHTD25

MHQ1005P15NHTD25 MHQ1005P1N1STD25 MHQ1005P1N6CTD25 MHQ1005P1N0CTD25 MHQ1005P8N2GTD25

MHQ1005P2N4BTD25 MHQ1005P2N2BT000 MHQ1005P1N2CT000 MHQ1005P2N7CTD25 MHQ1005P3N9CT000

MHQ1005P1N8BT000 MHQ1005P4N3CT000 MHQ1005P9N1GTD25 MHQ1005P9N1JTD25 MHQ1005P7N5HTD25

MHQ1005P5N1BT000 MHQ1005P5N6STD25 MHQ1005P3N6BTD25 MHQ1005P4N7STD25

MHQ1005P1N6STD25 MHQ1005P6N8GTD25 MHQ1005P4N7BT000 MHQ1005P1N1CTD25 MHQ1005P2N7STD25

MHQ1005P2N0CTD25 MHQ1005P15NGTD25 MHQ1005P1N3CT000 MHQ1005P5N1CTD25

MHQ1005P1N0STD25 MHQ1005P6N2CT000 MHQ1005P1N2BTD25 MHQ1005P4N3BTD25 MHQ1005P3N9BTD25

MHQ1005P2N4STD25 MHQ1005P1N0CT000