160-R22-DTQ - RCD Components, Inc.

Series 100 resistors offer exceptional performance at an economical cost.

Superior stability results from welded construction and windings of premium

grade resistance wire on thermally conductive ceramic cores. Hi-temp sili-

cone coating provides excellent protection & solvent resistance. Tin (or SnPb)

coated copper/copperweld leads ensure proper solderabilty and extended

shelf life. Marked with resis.value & tol. as minimum (custom marking avail).

100 SERIES

PRECISION POWER WIREWOUND RESISTORS

SILICONE COATED 1/2 WATT TO 50 WATT

World’s widest range! 0.005Ω ~2MΩ, ±0.005% ~10%, 0.5W ~50W.

Low cost, available from stock & exclusive SWIFTTM delivery program.

FA039H Sale of this product is in accordance with GF-061. Specications subject to change without notice.

1 Working voltage=(PR)1/2, not to exceed max rating (multiply by 0.7 for Opt.X) 2 Allow .032” additional for Opt X, Opt 33, or values<1Ω 3 Coating overow onto each lead ≤2xD typ 4 Performance is typical for Char.U with tol

≤1%, & is dependent on resis, options, etc. Consult factory for Char.V & tol >1% 5 Military p/n’s are given for reference only & do not imply qualication or exact interchangeability 6 Increased range avail 7 Resis value measured

at 3/8”±1/16 from each end of body 8 Heavier lead gauge option is recommended on low values to enable lower leadwire resis., increased current, & improved TC 9 Lead length applies to bulk packaged units (taped parts

generally have shorter leads, refer to taping spec.) 10 Series 100 has dual power rating depending on temp.rise & stability requirements; derate 50% to ensure high reliability & operational life stability

INDUCTANCE: small sizes have inductance of 1- 50uH typ. Larger sizes

and higher values typically have greater levels. For non-inductive design,

specify Opt. X. The max. series inductance for Opt.X resistors at 0.5MHz is

listed in table (per MIL-R-39007). Specialty

constructions are available for even lower

inductance levels (Opt.75 inductance=

50% of Opt.X, Opt.76=33%).

OPTIONS

 Option X: Low Inductance

 Option P: Increased Pulse Capability

 Option F: Flameproof Coating UL94V-0

 Option ER: 100-Hour Burn-In

 Option B: Increased Power

 Radial leads (opt.R), low thermal emf (opt.E), matched sets, custom

marking, cut & form, Hi-Rel screening, non-standard values, high-

voltage, etc. Customized components are RCD’s speciality!

RCD

Type

MIL

Type5

Std. Wattage

Ratings10

Opt.B Wattage

Ratings10 Resistance

Range6,7

Maximum

Voltage

Rating 1,6

DIMENSIONS [Numbers in brackets are mm]

A3C2D8 ± .003 [.08]

Char.U Char.V Char.U Char.V ± .062 [1.58] 110-155: ± .032

156-190: ± .045 Std. Optional

102 - 0.5 0.8 0.8 1.0 .01Ω - 2K 30V .16 ±.03 [4.±.8] .07±.02[1.8±.5] .020 -

110 RW81 (110B) 0.8 1.0 1.5 2.0 .01Ω - 8K 40V .24 ±.03 [6.±.8] .085 [2.16] .020 .024 (opt. 22)

115 - 1.0 1.2 1.5 2.0 .01Ω - 12K 45V .312 [7.92] .085 [2.16] .020 .024 (opt. 22)

120 - 1.0 1.2 - - .01Ω - 15K 50V .344 [8.74] .096 [2.44] .020 .024 (opt. 22)

125 RW70 (125B RW80) 1.5 1.8 2.0 2.5 .01Ω - 20K 55V .385 [9.78] .096 [2.44] .020 .024 (opt. 22)

130 - 1.6 2.0 - - .01Ω - 22K 65V .530 [13.5] .096 [2.44] .020 .024 (opt. 22)

133 - 2.0 3.0 3.0 4.0 .005Ω - 20K 80V .355 [9.00] .156 [3.96] .031 .024 (opt. 22)

135 RW69 3.0 4.0 4.0 5.0 .005Ω - 40K 140V .500 [12.7] .188 [4.78] .031 .024(22), .040(18)

140 RW79 3.0 4.0 4.0 5.0 .005Ω - 50K 140V .550 [14.2] .188 [4.78] .031 .040 (opt. 18)

145 - 3.5 4.5 4.5 6.5 .005Ω - 60K 180V .770 [19.6] .188 [4.78] .031 .040 (opt. 18)

150 - 3.5 4.5 5.0 7.0 .005Ω - 60K 150V .500 [12.7] .225 [5.72] .040 .032 (opt. 20)

155 - 4.0 5.0 6.0 8.0 .005Ω - 100K 210V .625 [15.9] .225 [5.72] .040 .032 (opt. 20)

156 - 5.0 6.0 - - .005Ω - 150K 300V .800 [20.3] .250 [6.35] .040 .032 (opt. 20)

160 RW74 5.0 7.0 7.0 10 .005Ω - 200K 400V .875 [22.2] .312 [7.92] .040 .032 (opt. 20)

165 RW67 6.0 7.5 - - .005Ω - 220K 450V 1.000 [25.4] .312 [7.92] .040 .032 (opt. 20)

170 - 7.0 9.0 10 12 .005Ω - 300K 550V 1.200 [30.9] .312 [7.92] .040 .032 (opt. 20)

171 - 7.0 8.5 - - .005Ω - 250K 700V 1.660 [42.2] .208 [5.28] .031 .040 (opt. 18)

172 - 8.5 10 - - .005Ω - 400K 900V 2.100 [53.3] .225 [5.72] .031 .040 (opt. 18)

173 - 9.0 11 12 14 .005Ω - 400K 650V 1.550 [39.4] .300 [7.62] .040 .032 (opt. 20)

175 RW68, 78 10 13 15 18 .005Ω - 500K 900V 1.7204 [43.7] .3504 [8.89] .040 .032 (opt. 20)

176 - 10 12 - - .005Ω - 500K 800V 1.875 [47.6] .300 [7.62] .040 .032 (opt. 20)

178 - 13 15 - - .01Ω - 750K 1150V 2.410 [61.2] .350 [8.89] .040 .032 (opt. 20)

180 RW56 14 16 16 20 .01Ω - 800K 1000V 2.100 [53.3] .500 [12.7] .040 -

185 - 20 25 - - .015Ω - 1M 1350V 2.800 [71.1] .500 [12.7] .040 -

186 - 25 30 - - .010Ω - 1M 1400V 4.060 [103] .350 [8.89] .040 .032 (opt. 20)

190 - 40 50 - - .025Ω - 2M 1500V 5.000 [127] .500 [12.7] .040 -

RESISTORSCAPACITOR

S



C

OILSDELAY LINES

DERATING (derate W/V/A ratings when ambient temp >25°C):

Char. U is max. power for ±0.5% typ. operational life stability & 275°C

hotspot; Char. V is max. power for ±3% stability & 350°C hotspot

RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com

43

AMBIENT TEMPERATURE ( °C )

-65 25 50 75 100 125 150 175 200 225 250 275 300 325 350

% RATED POWER

100

75

50

25

0

Char. V

Char. U

Tol <0.1%

TYPICAL PERFORMANCE 4 P/N DESIGNATION:

135 - 102 - J B W

Resis. Code 1% & tighter tols: 3 signif. digits & multiplier,

e.g. R100= 0.1Ω, 1R00= 1Ω,1000= 100Ω, 1001= 1KΩ.

2%-10%: 2digits & multiplier (R10= .1Ω, 1R0=1Ω,100=10Ω,

102=1K). Use extra digits as needed: R005, R0075, R012, etc.

Optional TC: 5= 5ppm, 10= 10ppm, 20= 20ppm, 30= 30ppm,

50= 50ppm, 101= 100ppm, 201=200ppm (leave blank if std)

RCD Type

Options:

X, R, V, P, F, ER, E, B, 76, 75, 33, 22, 20, 18

(leave blank if standard)

Tolerance: K=10%, J=5%, H=3%, G=2%, F=1%, D=0.5%,

C=0.25%, B=0.1%, A=0.05%, Q=0.02%, T=0.01%, V=.005%

Packaging: B= Bulk, T= T&R (avail. on type 102 to 176)

Termination: W=RoHS (std), Q= Tin/Lead (leave blank if both acceptable)

Stock

C2

1.375” Min9

(type 102~125 is 1.0”)

↑

A3

D

↓

PULSE CAPABILITY: Excellent pulse ability is inherent with the all-welded

wirewound construction, but can be enhanced by a factor of 50% or more

via special Option P processing (up to 500 joules). Pulse capability is highly

dependent on pulse duration, repetition rate & resis. value, consult factory.

RCD 160F

10KΩ 5%

Operational Life (Char.U) ±0.5% (±1% on Opt.B & sizes ≥10W)

Thermal Shock ±0.2%

Moisture Resistance ±0.2%

Shock and Vibration ±0.1%

Overload, 5 Sec 5x rated W 102-156, 10x W 160-190

Dielectric Strength: type 102-130

Dielectric Strength: type 133-190

300V (for 500V specify opt.23)

500V (for 1KV specify opt.33)

Max. Current (not to exceed

wattage or voltage rating)

Resistors with .020”lead dia = 11A,

.024” =15A, .032” =22A, .040”=30A

TCR: temp coefcient ≥10Ω

of resistance element, 1- 9.9Ω

tol ≤1% (contact 0.1-.99Ω

factory >1%) . 050-.099Ω

.01Ω -.049Ω

20ppm (5 & 10ppm avail.)

50ppm (10, 20, 30ppm avail.)

90ppm (20, 30, 50 ppm avail.)

300ppm (50, 100, 200ppm avail.)

600ppm (100, 200, 300ppm avail.)

RoHS

Term.W

is Pb-free

and RoHS

compliant

RCD Type ≤ 50Ω > 50Ω

102X-140X 0.2μH 0.37μH

145X-160X 0.3μH 0.6μH

165X-178X 0.65μH 1.2μH