www.RFM.com E-mail: info@rfm.com Page 1 of 10
©2010 by RF Monolithics, Inc. RF3609D - 3/3/10
Electrical Characteristics
Electrical Connections
Characteristic Sym Notes Min Typ Max Units
Center Frequency fC449.0 MHz
1 dB Bandwidth BW118.0 MHz
Maximum Insertion Loss, 440.6 to 457.4 MHz ILMAX 1.4 2.4
dB
Amplitude Ripple, p-p, 440.6 to 457.4 MHz 1.0
Rejection Referenced to Insertion Loss at 390.0 MHz:
DC to 429 MHz 32 35
479 to 549 MHz 32 35
549 to 949 MHz 37 40
949 to 1349 MHz 55 60
1349 to 1749 MHz 62 65
1749 to 2000 MHz 59 62
Source Impedance ZS50 Ω
Balanced Load Impedance ZL150 Ω
Case Style SM3838-8 3.8 x 3.8 mm Nominal Footprint
Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator 892, YWWS
S tandard Reel Quantity Reel Size 7 Inch 500 Pieces/Reel
Reel Size 13 Inch 3000 Pieces/Reel
Connection Terminals
Single-ended Port 6
Balanced Port 1, 3
Case Ground 4, 5, 7, 8
No Connection 2
• 440.6 to 457.4 MHz Filter
• Optimized for use with the TRC105 Transceiver
• Balanced 150 ohm IC Interfa ce
• Complies with Directive 2002/95/EC (RoHS)
Absolute Maximum Ratings
Rating Value Units
Input Power Level +15 dBm
DC V oltage ±5 V
Operating Temperature Range -40 to +85 °C
Storage Temperature Range in Tape and Reel -40 to +85 °C
449.0 MHz
SAW Filter
RF3609D
1. Unless noted otherwise, all specifications apply o ver the operating temperatur e range with filter s oldered to the specified demons trat ion board with imped ance
match ing to 50 Ω and measured with 50 Ω network analyzer.
2. Unless noted otherwise, all frequenc y specifications are referenced to the nominal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external
impedance matching design. See Application Note No. 42 for details.
4. The desi gn, manufact uring process, and specifications of this filter ar e subject to change.
5. US and international patents may apply.
6. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc.
Pb
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
SM3838-8
Preliminary