- 900 -
MBR6050PT THRU MBR60100PT
60.0 AMPS. Schottky Barrier Rectifiers
Voltage Range
50 to 100 Volts
Current
60.0 Amperes
Features
a Plastic material used carries Underwriters Laboratory
Classifications 94V-0
a Metal silicon rectifier, majority carrier conduction
a Low power loss, high efficiency
a High current capability, low forward voltage drop
a High surge capability
a For use in low voltage, high frequency inverters, free wheeling,
and polarity protection applications
a Guardring for overvoltage protection
a High temperature soldering guaranteed:
260
oC/10 seconds,0.17”(4.3mm)from case
Mechanical Data
a Cases: JEDEC TO-3P/TO-247AD molded plastic body
a Terminals: Leads solderable per MIL-STD-750, Method 2026
a Polarity: As marked
a Mounting position: Any
a Mounting torque: 10 in. - lbs. max
a Weight: 0.2 ounce, 5.6 grams
TO-3P/TO-247AD
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number Symbol MBR6050PT MBR6060PT MBR60100PT Units
Maximum Recurrent Peak Reverse Voltage VRRM 50 60 100 V
Maximum RMS Voltage VRMS 35 42 70 V
Maximum DC Blocking Voltage VDC 50 60 100 V
Maximum Average Forward Rectified Current
at Tc=125OC I(AV) 60 A
Peak Repetitive Forward Current (Rated VR, Square
Wave, 20KHz) at Tc=120oC IFRM 60.0 A
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load (JEDEC
method ) IFSM 500 A
Peak Repetitive Reverse Surge Current (Note 1) IRRM 1.0 A
Maximum Instantaneous Forward Voltage at (Note 2)
IF=30A, Tc=25OC
I
F=30A, Tc=125OC
VF
0.72
0.62
V
Maximum Instantaneous Reverse Current @Tc=25
at Rated DC Blocking Voltage Per Leg @ Tc=125
(Note 1)
IR 1.0
100.0 mA
mA
Voltage Rate of Change at (Rated VR) dV/dt 1,000 V/uS
Typical Thermal Resistance Per Leg (Note 3) RJC 1.2 /W
Operating Junction Temperature Range TJ -65 to +150
Storage Temperature Range TSTG -65 to +175
Notes: 1. 2.0us Pulse Width, f=1.0 KHz
2. Pulse Test: 300us Pulse Width, 1% Duty Cycle
3. Thermal Resistance from Junction to Case Per Leg
- 161 -
RATINGS AND CHARACTERISTIC CURVES (MBR6050PT THRU MBR60100PT)
FIG.2- MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT PER LEG
PEAK FORWARD SURGE CURRENT. (A)
110 100
100
200
0
300
500
400
600
NUMBER OF CYCLES AT 60Hz
Tj=Tj max.
8.3ms Single Half Sine Wave
JEDEC Method
FIG.3- TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS PER LEG
INSTANTANEOUS FORWARD CURRENT. (A)
0.6 0.8 1.0 1.10.9
0.7
0.50.40.30.2
0.1
01.2
1
0.1
10
100
500
FORWARD VOLTAGE. (V)
Tj=25 C
0
Tj=150 C
0
FIG.4- TYPICAL REVERSE CHARACTERISTICS
PER LEG
INSTANTANEOUS REVERSE CURRENT. (mA)
020 40 60 80 100 120 140
PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
0.001
0.1
0.01
1
10
50
Tj=125 C
0
Tj=25 C
0
Tj=75 C
0
FIG.6- TYPICAL TRANSIENT THERMAL IMPEDANCE
PER LEG
TRANSIENT THERMAL IMPEDANCE. ( C/W)
O
10.01 0.1 10 100
0.1
10.0
1
100
T, PULSE DURATION. (sec)
FIG.5- TYPICAL JUNCTION CAPACITANCE PER LEG
JUNCTION CAPACITANCE.(pF)
0.1 1 10 100
100
1,000
5,000
REVERSE VOLTAGE. (V)
Tj=25 C
f=1.0MHz
Vsig=50mVp-p
0
FIG.1- FORWARD CURRENT DERATING CURVE
AVERAGE FORWARD CURRENT. (A)
050 100 150
0
15
30
45
60
75
CASE TEMPERATURE. ( C)
o
RESISTIVE OR
INDUCTIVE LOAD
Pulse Width=300 s
1% Duty Cycle
