Data Sheet
Keysight Technologies
U8000 Series
Single Output DC Power Supplies
02 | Keysight | U8000 Series Single Output DC Power Supplies - Data Sheet
Key Features
– Excellent load and line regulation:
(CV: <0.01% +2 mV;
CC: <0.02% + 2mA)
– Low output noise: 1 mVrms (20 Hz
to 20 MHz)
– Over Voltage and Over Current
Protection
– LCD display with backlight
capability
– Standby output for safety purposes
– Save-and-recall function upto
three memory states
– Security features: keypad lock and
physical lock mechanism
More Protection, More Convenience — For Less
It’s often difficult to find a power supply that is just right for your test
requirements and your budget. Whether you’re manufacturing consumer
products, testing electronic components, or simply looking for reliable, affordable
power, the Keysight Technolgoies, Inc. family of basic power supplies now
includes single output, non-programmable models in the 90 W to 150 W power
range. With capabilities typically found only in programmable supplies, you get
excellent value along with great efficiency in your work. As a result, you can
minimize setup time and measurement errors and maximize device reliability.
You’ll get the right power with a difference — backed by stringent safety
certifications and Keysight quality standards — at an affordable price.
The Keysight U8000 Series offers 90 W to 150 W single output, non-
programmable DC power supplies that include features typically found only
in costly programmable supplies. The U8000 Series delivers excellent value
by providing reliable DC power, efficient setup capabilities, and important
security features that let you address a variety of applications in electronics
manufacturing and educational settings.
Power That’s Suitable for Your Application Requirements
The Keysight U8000 Series with power ranging from 90 W to 150 W provides
performance that is suitable for electronics manufacturing for computers and
peripherals, communication systems and peripherals, aircraft/avionics systems,
electronic components, and more. The U8000 Series complements the Keysight
E3600 DC power supplies family to provide a wider range of power source
alternatives.
Figure 1. The U8001A 90 W and U8002A 150 W single output DC power supplies
03 | Keysight | U8000 Series Single Output DC Power Supplies - Data Sheet
Great Features and Solid
Performance —
Within Budget
Differentiated features typically found
only in programmable power supplies
The U8000 Series offers fully
integrated over voltage protection
(OVP) and over current protection
(OCP) to prevent damage to the
device-under-test (DUT). Using the
capability to save and recall three
memory states, you can minimize
errors and reduce set-up time. The
U8000 Series also provides security
features such as keypad lock to
prevent measurement errors due
to accidental front panel usage.
When the keypad lock is activated,
the knob and all the buttons on the
front panel are disabled except the
keypad lock button. The physical lock
mechanism found at the rear panel
of the power supply provides secure
instrument storage. The LCD display
with backlight on/off options enables
brighter display for data viewing (see
Figure 2).
Solid, reliable performance in its
class
The U8000 Series provides excellent
load and line regulation (Constant
Voltage, CV: < 0.01% +2 mV; Constant
Current, CC: < 0.02% +2 mA) to
ensure stable output even when the
load changes. With the fast 50 sec
transient response, test times and
manufacturing cost are significantly
reduced. The U8000 Series comes with
low output noise of 1 mVrms, 3 mArms
from 20 Hz to 20 MHz, providing clean
output and minimizing the interference
in the DUT.
Figure 2. Backlight on/off options for LCD display
Backlight ON Backlight OFF
Get That Something Extra:
Safety and Security
The U8000 Series has been stringently
tested according to various industrial
safety standards: CSA (for US and
CA regulatory requirements), C-tick
(Australia), and CE (Europe). The
U8000 Series is fully integrated with
OVP and OCP in order to prevent
damage to the DUT. The security
features offered in the U8000 Series
prevent measurement errors and also
ensure safety storage of the power
supply. Security features such as
keypad locking capability preclude
accidental front panel usage while
the physical lock mechanism provides
secure instrument storage.
Front Panel Operation
An easy-to-use rotary knob and
self-guiding keypads allow you to set
the output at your desired resolution
without any effort. Also, both voltage
and current levels can be set to a
maximum resolution of 10 mV/10 mA
from the front panel. In addition, you
can save and recall for up to three
operating states that are stored in the
internal non-volatile memory.
Easy-to-use control functions:
– Enabling or disabling OVP and OCP
– Setting the OVP and OCP trip levels
– Clearing OVP and OCP conditions
– Setting and displaying the voltage
and current limit values
– Operating state storage/recall
– Resetting the power supply to
power-on state
– Calibrating the power supply
– Enabling or disabling the output
Compliant to several safety
standards—CSA, C-tick, CE
Physical lock
mechanism
04 | Keysight | U8000 Series Single Output DC Power Supplies - Data Sheet
Keypad Lock/Unlock options to
prevent accidental front panel usage
Selects the knob control
function for voltage and
current adjustment
Control for enabling and
disabling the output of the
power supply
Features of the U8000 Series
Backlight On/Off options
enabling brighter data display
Highly visible LCD displaying actual
values of output voltage and current
in meter mode and limit values of
voltage and current in limit mode
Three storage locations (M1, M2,
and M3) for user-defined operating
states with save-and-recall capability
Fully integrated over voltage
and over current protection to
prevent damages to the DUT
Setting and display of the
voltage and current limit values
Versatile binding posts offer
flexibility to use safety test leads,
banana plugs or stripped wires
Rotary knob for quick
and analog-like control of
voltage and current
••••••••••
05 | Keysight | U8000 Series Single Output DC Power Supplies - Data Sheet
Parameter U8001A U8002A
Output Ratings (at 0 °C to 40 °C) 0 to +30 V
0 to 3 A
0 to +30 V
0 to 5 A
Line and Load Regulation CV: <0.01% +2 mV
CC: <0.02% +2 mA
Ripple and Noise (25 °C ±5 °C) CV: 12 mVp-p, <1 mVrms;
CC: 3 mArms
Load Transient Response Time
(within 15 mV from full load to half load
and from half load to full load)
<50 µs
Programming Accuracy1 (25 °C ±5 °C) <0.35% +20 mV
<0.35% +20 mA
Readback Accuracy1 (25 °C ±5 ° C) <0.35% +20 mV
<0.35% +20 mA
Meter Resolution Voltage: 10 mV
Current: 10 mA
Maximum Output Float Voltage ±240 Vdc
1 Specifications are based on one hour warm-up period.
06 | Keysight | U8000 Series Single Output DC Power Supplies - Data Sheet
Supplemental Characteristics
Supplemental Characteristics
Parameter U8001A U8002A
Temperature Coefficient
(for 12 months)
CV: <100 ppm/ °C
CC: <380 ppm/ °C CC: <300 ppm/ °C
Output Voltage Overshoot
(during turn-on or turn-off of AC power state
with the output control set to less than 1 V)
<1 V
Voltage Programming Speed, to within 1% of
total excursion
Up Full Load
No Load
150 ms
100 ms
Down Full Load
No Load
30 ms
450 ms
Last Memory Setting Enabled Yes
Over Voltage Protection Response Time <1.5 ms when the trip voltage is equal to or greater than 3 V and <10 ms when the trip voltage
is less than 3 V (average time for output to drop from 90% of output voltage to 1 V after OVP
condition occurred)
Protection Features
Parameter U8001A U8002A
Over Voltage Protection Accuracy
± (% of output + offset) <0.5% +0.5 V
Over Voltage Protection Programmable
Range 1 V to 33 V
Over Current Protection Accuracy
± (% of output + offset) <0.5% +0.5 A
Over Current Protection Programmable
Range
1 A to 3.3 A 1 A to 5.5 A
Parameter U8001A U8002A
Input Power Option (selectable) 100 Vac ± 10%, 47 to 63 Hz
115 Vac ± 10%, 47 to 63 Hz
230 Vac ± 10%, 47 to 63 Hz
Maximum Input Power 330 VA 500 VA
Fuse External, customer assessable
Parameter U8001A U8002A
Dimensions (H x W x L) 88.1 mm x 212.3 mm x 394.3 mm
Weight 7.3 kg 8.3 kg
07 | Keysight | U8000 Series Single Output DC Power Supplies - Data Sheet
Display
Liquid Crystal Display (LCD)
Operating Environment
– Operating temperature from 0 °C to
40 °C (for full rated output) and
40 °C to 55 °C (for derated output)
– Relative humidity up to 95%
– Altitude up to 2000 meters
Storage Compliance
-20 °C to 70 °C
Safety and EMC Compliance
Certified with:
– IEC 61326:2002/EN61326:1997+
A1:1998+A3:2003
– CISPR 11:1990/EN55011:1990
– Canada: ICES-001:2004
– Australia/New Zealand: AS/NZS
CISPR11:2004
– IEC 61010-1:2001/EN61010-1:2001
(2nd Edition)
– Canada: CAN/CSA-C22.2
No. 61010-1-04
– USA: ANSI/UL 61010-1:2004
Memory Operations
Up to three operating states
Warranty
– Three year for U8000 series power
supplies
– Three months for standard shipped
accessories
U8001A DC Power Supply, 30 V, 3 A
U8002A DC Power Supply, 30 V, 5 A
Included Documentation:
U8001A-0B0 No documentation
package
Additional Documentation:
– U8001A-AB0 Traditional Chinese
User’s and Service Guide
– U8001A-AB2 China – Simplified
Chinese printed User’s and
Service Guide
– U8001A-ABA English User’s and
Service Guide
– U8001A-ACF Japanese User’s and
Service Guide
Calibration Document:
U8001A-UK6 Commercial calibration
with test result data
Power Options
Opt 0E9 90 to 110 Vac, 47 to 63 Hz
Opt 0EM 104 to 126 Vac, 47 to 63 Hz
Opt 0E3 207 to 253 Vac, 47 to 63 Hz
Other Options
– Option U800xA-AUT Custom Power
On (available only upon purchase
with main model)
– E3600A-100 Test lead kit
– Option 1CM Rack-mount kit
Rack-mount Kits
To rack-mount a single instrument:
Adapter kit (P/N 5063-9240)
To rack-mount two instruments side-
by-side:
Lock-link kit (P/N 5061-9694)
Flange kit (P/N 5063-9212)
To rack-mount two instruments in a
sliding support shelf:
Support shelf (P/N 5063-9255)
Slide kit (P/N 1494-0015)
General Characteristics
Ordering Information
Calibration Cycle
One year
Warm-up time
60 minutes
08 | Keysight | U8000 Series Single Output DC Power Supplies - Data Sheet
This information is subject to change without notice.
© Keysight Technologies, 2009 - 2014
Published in USA, October 6, 2014
5989-7182EN
www.keysight.com
For more information on Keysight
Technologies’ products, applications or
services, please contact your local Keysight
office. The complete list is available at:
www.keysight.com/find/contactus
Americas
Canada (877) 894 4414
Brazil 55 11 3351 7010
Mexico 001 800 254 2440
United States (800) 829 4444
Australia 1 800 629 485
China 800 810 0189
Hong Kong 800 938 693
India 1 800 112 929
Japan 0120 (421) 345
Korea 080 769 0800
Malaysia 1 800 888 848
Singapore 1 800 375 8100
Taiwan 0800 047 866
Other AP Countries (65) 6375 8100
Europe & Middle East
Austria 0800 001122
Belgium 0800 58580
Finland 0800 523252
France 0805 980333
Germany 0800 6270999
Ireland 1800 832700
Israel 1 809 343051
Italy 800 599100
Luxembourg +32 800 58580
Netherlands 0800 0233200
Russia 8800 5009286
Spain 800 000154
Sweden 0200 882255
Switzerland 0800 805353
Opt. 1 (DE)
Opt. 2 (FR)
Opt. 3 (IT)
United Kingdom 0800 0260637
For other unlisted countries:
www.keysight.com/find/contactus
(BP-09-23-14)
myKeysight
www.keysight.com/find/mykeysight
A personalized view into the information most relevant to you.
www.axiestandard.org
AdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an
open standard that extends the AdvancedTCA for general purpose and
semiconductor test. Keysight is a founding member of the AXIe consortium.
ATCA®, AdvancedTCA®, and the ATCA logo are registered US trademarks of
the PCI Industrial Computer Manufacturers Group.
www.lxistandard.org
LAN eXtensions for Instruments puts the power of Ethernet and the
Web inside your test systems. Keysight is a founding member of the LXI
consortium.
www.pxisa.org
PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a
rugged, PC-based high-performance measurement and automation system.
Three-Year Warranty
www.keysight.com/find/ThreeYearWarranty
Keysight’s commitment to superior product quality and lower total cost
of ownership. The only test and measurement company with three-year
warranty standard on all instruments, worldwide.
Keysight Assurance Plans
www.keysight.com/find/AssurancePlans
Up to five years of protection and no budgetary surprises to ensure your
instruments are operating to specification so you can rely on accurate
measurements.
www.keysight.com/go/quality
Keysight Technologies, Inc.
DEKRA Certified ISO 9001:2008
Quality Management System
Keysight Channel Partners
www.keysight.com/find/channelpartners
Get the best of both worlds: Keysight’s measurement expertise and product
breadth, combined with channel partner convenience.
