The VHDM Right Angle Male (RAM) is very similar in construction to the VHDM female six row daughter card connector. The VHDM-RAM was designed to meet the needs of coplanar board-to-board applications. Any multiple of signals, power and guidance modules can be arranged on a length of stiffener. This sequence would mirror a mating VHDM Female six row daughter card connector. Because this coplanar configuration is based on multiples of individual wafers, there is no requirement to design in multiples of 10, 20 and 25 wafers. A maximum length of 300 mm is available. The following example drawing is a multiple of 10 wafers. 2.00 by 2.25mm (.079 by .089") Pitch VHDM(R) Module-to-Backplane Connector Right Angle Male