The VHDM Right Angle Male (RAM) is very similar in construction to the
VHDM female six row daughter card connector. The VHDM-RAM was
designed to meet the needs of coplanar board-to-board applications. Any
multiple of signals, power and guidance modules can be arranged on a
length of stiffener. This sequence would mirror a mating VHDM Female
six row daughter card connector. Because this coplanar configuration is
based on multiples of individual wafers, there is no requirement to design
in multiples of 10, 20 and 25 wafers. A maximum length of 300 mm is
available. The following example drawing is a multiple of 10 wafers.
2.00 by 2.25mm
(.079 by .089”) Pitch
VHDM®
Module-to-Backplane
Connector
Right Angle Male
