SMT05E Series 3.0-5.5 Vin single output DC-DC CONVERTERS E Class Non-isolated 1 NEW Product * * * * * * * 5 A Current rating Input voltage range: 3.0 Vdc to 5.5 Vdc Output voltage range: 0.75 Vdc to 3.63 Vdc Ultra high efficiency: 94% @ 5 Vin and 3.3 Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of >9 million hours per Telcordia SR-332 * Ideal solution where board space is at a premium or tighter card pitch is required * Industry standard surface-mount footprint * Available RoHS compliant The SMT05E series are non-isolated dc-dc converters packaged in a surface mount footprint giving designers a cost effective solution for conversion from a 3.3 Vdc to 5 Vdc source. The SMT05E has a wide input range (3.0 Vdc to 5.5 Vdc) and offers a wide 0.75 Vdc to 3.63 Vdc output voltage range with a 5 A load, which allows for maximum design flexibility and a pathway for future upgrades. The SMT05E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface-mount technology and automated manufacturing techniques, the SMT05E offers compact size and efficiencies of up to 94%. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25 C unless otherwise stated OUTPUT SPECIFICATIONS Voltage adjustability EMC CHARACTERISTICS 0.75-3.63 Vdc Setpoint accuracy 0.4% Line regulation 1.0% Load regulation 1.0% Minimum load 0A Overshoot/undershoot None Ripple and noise 5 Hz to 20MHz 75 mV pk-pk 25 mV rms Temperature co-efficient 0.01%/C Transient response 60 mV max. deviation 50 s recovery to within 1% INPUT SPECIFICATIONS EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 GENERAL SPECIFICATIONS Efficiency See Table Insulation voltage Switching frequency Non-isolated Fixed 300 kHz typ. Approvals and standards EN60950 UL/cUL60950 Material flammability Dimensions UL94V-0 (LxWxH) 20.32 x 11.43 x 6.70 mm 0.800 x 0.450 x 0.264 inches Weight Input voltage range Input current Electrostatic discharge Conducted immunity Radiated immunity 3.0-5.5 Vdc No load (max.) Input current (max.) Input reflected ripple Remote ON/OFF Start-up time 150 mA 3.9 A max. @ Io max. and Vout = 3.3 V 40 mA rms Coplanarity MTBF International Safety Standard Approvals UL/cUL CAN/CSA 22.2 No. E174104 UL 60950 File No. E174104 100 m Telcordia SR-332 9,009,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 2) (See Note 1) 20 ms 2.8 g (0.10 oz) Operating ambient, temperature Non-operating -40 C to +85 C -40 C to +125 C PROTECTION Short-circuit Thermal Continuous Automatic recovery TUV Product Service (EN60950) Certificate No. B 03 10 38572 037 CB report and certificate to DE3-51686M1 File Name: smt05e_05_05.pdf Rev (03): 16 Dec 2005 SMT05E Series 3.0-5.5 Vin single output DC-DC CONVERTERS E Class Non-isolated 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT POWER INPUT VOLTAGE OUTPUT VOLTAGE 8.25 W 3.0-5.5 Vdc 1.5 Vdc 18.15 W 3.0-5.5 Vdc (MAX.) 0.75-3.63 Vdc Part Number System with Options OUTPUT CURRENT OUTPUT CURRENT NEW Product REGULATION EFFICIENCY (TYP.) LINE LOAD MODEL NUMBER (3,4) (MIN.) (MAX.) 0A 5A 87.5% 1.0% 1.0% SMT05E-05S1V5J 0A 5A 94% 1.0% 1.0% SMT05E-05W3V3J SMT05E-05W3V3-TJ Product Family SMT = Surface Mount Rated Output Current 05 = 5 Amps Performance E = Enhanced Performace Input Voltage 05 = 3.0 Vdc to 5.5 Vdc Packaging Options (3) No `-T' Suffix = Pb-free RoHS 6/6 compliant parts in trays e.g SMT30E-12W3V3J -TJ = Pb-free RoHS 6/6 compliant part in Tape and Reel e.g SMT30E-12W3V3-TJ Output Voltage 0.75 Vdc to 3.63 Vdc Type of Output S = Single W = Wide Output Voltage Adjustment of the SMT05E-05W3V3J Series The ultra-wide output voltage trim range offers major advantages to users who select the SMT05E-05W3V3J. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.75 Vdc to 3.63 Vdc. When the SMT05E-05W3V3J converter leaves the factory the output has been adjusted to the default voltage of 0.75 V. * When Vin 4.5 V, then Vout can be adjusted from 0.75 Vdc to 3.63 Vdc * When Vin < 4.5 V, then Vout can be adjusted from 0.75 Vdc to 2.75 Vdc Notes 1 The SMT05E features a `Negative Logic' Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SMT05E: Configuration Remote pin open circuit Remote pin pulled low Remote pin pulled high [Von/off > 2.5 V] 2 3 4 Converter Operation Unit is ON Unit is ON Unit is OFF An `Positive Logic' Remote ON/OFF version is also possible with this converter. To order please use part number SMT05E-05W3V3-RJ or SMT05E-05W3V3-RTJ. Full derating curves available in both the Longform Datasheet and Application Note. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. File Name: smt05e_05_05.pdf Rev (03): 16 Dec 2005 SMT05E Series 3.0-5.5 Vin single output DC-DC CONVERTERS E Class Non-isolated 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product 0.160 (4.06) 0.160 (4.06) 0.450 (11.43) 0.190 (4.83) 0.180 (4.57) TOP VIEW 3 2 0.340 (8.64) 0.350 (8.90) 4 1 5 0.800 (20.32) 0.264 [6.70] 0.062 (1.57) 0.060 (1.52) 0.050 (1.26) BOTTOM VIEW 0.041 (1.04) SEATING PLANE SIDE VIEW CONNECTOR (5PL) LENGTH 0.090 (2.29) WIDTH 0.062 (1.57) All dimensions in inches (mm) All tolerance 0.010in (0.25mm) unless otherwise stated PIN CONNECTIONS PIN NUMBER FUNCTION 1 Remote ON/OFF 2 Vout 3 Trim 4 Ground 5 +Vin Figure 1 - Mechanical Drawing and Pinout Table Datasheet (c) Artesyn Technologies(R) 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note Longform Datasheet www.artesyn.com File Name: smt05e_05_05.pdf Rev (03): 16 Dec 2005