DC Axial Fan Specifications: Mechanical Characteristic Motor design Single phase, 8-poles Brushless DC motor Bearing system Vapo Bearing System Dimensions 17mm x 17mm x 8mm Materials of frame Thermoplastic PBT Materials of fan blade Thermoplastic PBT Direction of rotation Counter-clockwise viewed from front of fan blade Mounting holes Diameter 2mm in 3 holes Weight 4.36g Electric Characteristic Rated voltage 5V DC Rated current 100mA / Max. 115mA Rated power consumption 0.5 Watts / Max. 0.58 Watts Operating voltage range 2.5V DC to 6V DC Starting voltage 2.5V DC (25C power on/off) Operating temperature range -10C to +70C Storage temperature range -40C to +70C Performance Characteristic Rated speed 15,000 RPM 30% at rated voltage Air flow 0.7CFM Static pressure 0.17"-H2O Acoustic noise 16dB(A) Insulation resistance plastic housing 500M at 500V DC between internal stator and lead wire(+) Dielectric strength Applied AC 500V for one minute or AC 600V for 2 seconds between housing and lead wire (+) Life expectancy 60,000 Hours at 40C, 65% Humidity, 90% CL. Protection *Automatic Restart Polarity Protection *In a situation where the fan is locked by an external force while the electricity is on, an increase in coil temperature will be prevented by temporarily turning off the electrical power to the motor. The fan will automatically restart when the locked rotor condition is released. www.element14.com www.farnell.com www.newark.com Page <1> 07/10/14 V1.0 DC Axial Fan Performance Curves Dimensions Part Number Table Description Part Number DC Axial Fan MC36357 Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <2> 07/10/14 V1.0