www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.007/10/14
DC Axial Fan
Specications:
Mechanical Characteristic
Motor design Single phase, 8-poles Brushless DC motor
Bearing system Vapo Bearing System
Dimensions 17mm × 17mm × 8mm
Materials of frame Thermoplastic PBT
Materials of fan blade Thermoplastic PBT
Direction of rotation Counter-clockwise viewed from front
of fan blade
Mounting holes Diameter 2mm in 3 holes
Weight 4.36g
Electric Characteristic
Rated voltage 5V DC
Rated current 100mA / Max. 115mA
Rated power consumption 0.5 Watts / Max. 0.58 Watts
Operating voltage range 2.5V DC to 6V DC
Starting voltage 2.5V DC (25°C power on/off)
Operating temperature range -10°C to +70°C
Storage temperature range -40°C to +70°C
Performance Characteristic
Rated speed 15,000 RPM ±30% at rated voltage
Air ow 0.7CFM
Static pressure 0.17"-H2O
Acoustic noise 16dB(A)
Insulation resistance plastic housing 500MΩ at 500V DC between internal stator and
lead wire(+)
Dielectric strength Applied AC 500V for one minute or AC 600V for
2 seconds between housing and lead wire (+)
Life expectancy 60,000 Hours at 40°C, 65% Humidity, 90% CL.
Protection *Automatic Restart
Polarity Protection
* In a situation where the fan is locked by an external force while the electricity is on, an increase in coil temperature will
be prevented by temporarily turning off the electrical power to the motor. The fan will automatically restart when the locked
rotor condition is released.
www.element14.com
www.farnell.com
www.newark.com
Page <2> V1.007/10/14
DC Axial Fan
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
Performance Curves
Dimensions
Part Number Table
Description Part Number
DC Axial Fan MC36357
