1N5059GP THRU 1N5062GP Glass Passivated Junction Rectifier Reverse Voltage 200 to 800 V Forward Current 1.0 A DO-204AC (DO-15) Features 0.034 (0.86) 0.028 (0.71) DIA. * d e t n e t a P 1.0 (25.4) min. 0.300 (7.6) 0.230 (5.8) 0.140 (3.6) (R) * Plastic package has Underwriters Laboratories Flammability Classification 94V-0 * High temperature metallurgically bonded construction * Cavity-free glass passivated junction * Capable of meeting environmental standards of MIL-S-19500 * 1.0 Ampere operation at TA=75C with no thermal runaway * Typical IR less than 0.1A * High temperature soldering guaranteed: 350C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs., (2.3kg) tension 0.104 (2.6) Dia. Mechanical Data 1.0 (25.4) min. Case: JEDEC DO-204AC, molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.015 ounce, 0.4 gram Dimensions in inches and (millimeters) *Glass-plastic encapsulation technique is covered by Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306 Maximum Ratings & Thermal Characteristics Parameter Symbol * Maximum repetitive peak reverse voltage Ratings at 25C ambient temperature unless otherwise specified. 1N5059GP 1N5060GP 1N5061GP 1N5062GP Unit VRRM 200 400 600 800 V VRMS 140 280 420 560 V * Maximum DC blocking voltage VDC 200 400 600 800 V * Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=75C IF(AV) 1.0 A * Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 50 A * Maximum full load reverse current, full cycle average 0.375" (9.5mm) lead length at TA=25C TA=75C IR(AV) 5.0 150 A RJA RJL 45 20 C/W TJ, TSTG -65 to +175 C Maximum RMS voltage Typical thermal resistance (NOTE 1) Operating junction and storage temperature range Electrical Characteristics Ratings at 25C ambient temperature unless otherwise specified. Parameter Symbol 1N5059GP 1N5060GP 1N5061GP 1N5062GP Unit VF 1.2 V IR 5.0 300 A Typical reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A trr 2.0 s Typical junction capacitance at 4.0V, 1MHz CJ 15 pF * Maximum instantaneous forward voltage at 1.0A, TA=75C * Maximum DC reverse current TA= 25C at rated DC blocking voltage TA=175C NOTES: (1) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted *JEDEC registered values 3/10/00 1N5059GP THRU 1N5062GP Ratings and Characteristic Curves (T A = 25C unless otherwise noted) FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 50 1.0 60 HZ RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1 - FORWARD CURRENT DERATING CURVE 0.8 0.6 0.4 0.2 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 40 30 20 10 0.375" (9.5mm) LEAD LENGTH 0 0 0 25 50 100 75 125 150 175 1 10 100 NUMBER OF CYCLES AT 60 HZ AMBIENT TEMPERATURE, C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 10 TJ=25C PULSE WIDTH=300s 1% DUTY CYCLE 1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 TJ=125C 1 TJ=100C 0.1 0.01 0 TJ=25C 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL JUNCTION CAPACITANCE FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE (C/W) JUNCTION CAPACITANCE, pF 30 TJ=25C f=1.0 MHZ Vsig=50mVp-p 10 1 100 10 1 0.1 0.01 0.1 1 t, PULSE DURATION, sec 1 10 REVERSE VOLTAGE, VOLTS 100 10 100