Amphenol (R) PT Series Miniature Cylindrical Connectors 12-070-19 www.amphenol-industrial.com Amphenol(R) 97 Series Connectors are UL recognized and CSA recognized. Table of Contents Page Introduction, Amphenol(R) Miniature Cylindrical General Information, Design Flexibility . . . . . . . . . . . . . . 1, 2 Connector Selection Guide . . . . . . . . . . . . . . . . . . . . . . . 3 Insert availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 5 Alternate positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Insert arrangement patterns . . . . . . . . . . . . . . . . . . . . . . . . . 7-10 PT, SP, MS/PT Proprietary/MIL-DTL-26482, Series 1 Bayonet Coupling, Solder Contacts General Information, Specifications, Service Class . . . . . . . . 11, 12 PT00 (MS3110), SP00 wall mounting receptacle . . . . . . . . . 13 PT01 (MS3111) cable connecting receptacle . . . . . . . . . . . .14 PT02 (MS3112) SP02 box mounting receptacle . . .. . . . . . . .15 PT06 (MS3116) SP06 straight plug . . . . . . . . . . . . . . . . . .16 PT07 (MS3114) SP07 jam nut receptacle . . . . . . . . . . . . . . . . . . . 17 PT08E, SP08E 90 degree plug . . . . . . . . . . . . . . . . . . . . .18 PT Connectors with Printed Circuit Board Contacts box mount receptacle, jam nut receptacle . . . . . . . . . . . . . . . . . . .19 PTB, SPB thru bulkhead receptacle . . . . . . . . . . . . . . . . . . . . . . . . .20 General Information, Specifications - PT hermetic . . . . . . . 21 PTIH (MS3113H) hermetic solder mounting receptacle . . . . . . 22 PT02H hermetic box mounting receptacle . . . . . . . . . . . . . 23 PT07H (MS3114H) hermetic jam nut receptacle . . . . . . . . . .24 PT, SP, MS/PT how to order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 PT-SE, SP-SE, MS/PT-SE Proprietary/MIL-DTL-26482, Series 1 Bayonet Coupling, Crimp Contacts General Information, Specifications, Service Class . . . . . . . .26, 27 PT00SE (MS3120), SP00SE wall mounting receptacle . . . . . . . . .28 MF00SE (MS3128) wall mounting receptacle . . . . . . . . . . . . . . . . .29 PT01SE (MS3121) SP01SE cable connecting receptacle . . . . . .30 PT02SE (MS3122) SP02SE box mounting receptacle . . . . . . . 31 MF02SE (MS3127) box mounting receptacle . . . . . . . . . . . . . . . .. 32 PT06SE (MS3126), SP06SE straight plug . . . . . . . . . . . . . . 33 PT07SE (MS3124) SP07SE jam nut receptacle . . . . . . . . . . 34 PT08SE, SP08SE 90 degree plug . . . . . . . . . . . . . . . . . . 35 PT-SE, SP-SE, MS/PT-SE how to order . . . . . . . . . . . . . . . . 36 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-40 Glands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Application tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Contacts, Power and Thermocouple Crimp . . . . . . . . . . . . . . . . . 43 Contacts, Shielded Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44-48 Mounting Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .49 Other Amphenol Miniature Cylindrical Connectors . . . . . . . . . . . . . . . . . . 50 Proprietary/MIL-DTL-26482 Series 1 connectors covered in this catalog are widely used in general duty and environmental applications, both industrial and military. Markets that use this family of connectors include: * Instrumentation * Monitoring Equipment * Machine Tool, Factory Automation * Communications * Geophysical * Industrial Controls and Robotics * Oil and Petrochemical Industries * Rail/Mass Transit * Military/Aerospace If more information is needed concerning the connectors covered in this publication, or if there are special application needs, please contact: Amphenol Corporation Amphenol Industrial Operations 191 Delaware Avenue Sidney, New York 13838-1395 Telephone: 888-364-9011 Fax: 520-397-7169 Please go to the Amphenol websites to view, download and save this catalog and most all of Amphenol interconnection product literature. www.amphenol-industrial.com Some miniature connector styles are available in RoHS Compliant versions. Please contact Amphenol Industrial Operations for more information. Amphenol operates Quality Systems that are certified to ISO 9001:2015; ISO 14001:2015; ISO/TS 16949:2016 by third party registrars. NOTE: The connector products in this brochure were formerly known as Bendix(R) products. These products are now manufactured and sold under the Amphenol(R) brand name. The name "Amphenol" will replace the name "Bendix" on products and literature in the future. NOTE: The Miniature MIL-DTL-26482, Series 2 connectors PTS-DR and MS/PTS-DR (formerly in this catalog) are no longer supplied with these designations. Amphenol now supplies the Amphenol(R)/ Matrix(R) MIL-DTL-26482, Series 2. (Military numbers include MS3470 - MS3472, MS3474, - MS3476). Amphenol(R) Miniature Cylindrical Connectors Proprietary/MIL-DTL-26482, Series 1 Amphenol(R) Miniature Cylindrical connectors offer twice the number of contacts in just half the size of a Standard connector. These miniature connectors, are available in several series, each with varying design characteristics and customer options to meet cost considerations and provide maximum design flexibility. There are two styles within the family that are MS approved and qualified to MIL-DTL-26482, Series 1, and in addition there are several proprietary styles. Common features of all styles: * All are for general duty applications and environmental sealing is achieved with the grommet and clamp design. * Operating temperature is from -55C to +125; Operating voltage to 1000 VAC (RMS) at sea level. * Pin and socket contacts are machined from low loss copper alloy and gold plated to eliminate contact corrosion and provide an indefinite shelf life. * All have resilient inserts which provide high dielectric strength and moisture barrier. * A variety of shell finishes (including non-cadmium) and a variety of back-end accessories are available within the styles. Bayonet Coupling with Solder Contact Termination PT Solder jam nut receptacle and mated straight plug PT, MS/PT (solder) * MS and proprietary versions * Factory installed solder contacts * 3 point bayonet coupling and 5 key/keyway mating. * Intermateable with all miniature series connectors. * MS/PT meets MIL-DTL-26482 Series 1, service classes E, F and P. * MS/PT is UL recognized. SP (solder) * SP Series is a modification of the PT with same features except a wider flange for back panel mounting Options * 7 shell styles with 60 insert patterns * Hermetic seal (glass fusion) receptacle styles available * Pressurized thru bulkhead receptacle style available * Per-installed coax solder contacts are available * Printed circuit board contacts are available Bayonet Coupling with Crimp Contact Termination PT Solder wall mount receptacle PT-SE Crimp wall mount receptacle and mated straight plug PT-SE, MS/PT-SE (crimp) * MS and proprietary versions * Crimp rear insertable/front release contact termination. (closed entry socket insert prevents probe damage). * 3 point bayonet coupling and 5 key/keyway mating. * Intermateable with all miniature series connectors. * MS/PT-SE meets MIL-DTL-26482 Series 1, service classes E, F, P. SP-SE (crimp) * Modification of the PT-SE with wider flange for back panel mounting 1 Options * 6 shell styles with 47 insert patterns * Coax and thermocouple contacts are available Amphenol Miniature Cylindrical design flexibility The large family of miniature proprietary and MS style connectors provides for many optional features and designs. In addition to the choices of bayonet or threaded shells, solder or crimp termination within the style variations, there are additional options that are shown here. Hermetics Hermetically sealed receptacles have fused compression glass sealed inserts which provide environmental moisture sealing. There are three hermetic styles within the PT bayonet series. Coaxial Contacts Amphenol Miniature connectors can incorporate shielded coax contacts. Size 8 and 12 crimp coax contacts are available in PT-SE, SP-SE, MS/PT-SE. Factory installed size 8 and 12 solder type coax contacts are available in PT, SP, MS/PT connectors. See coax contact information pages at the end of this catalog. PT Connector with Hermetic Seal Insert and Coax Contacts PT Connector with PC Tail Contacts Printed Circuit Board Tail Contacts PT bayonet connectors in box mounting receptacle and jam nut receptacle styles are available with printed circuit board contacts. Standard PCB tails for MIL-DTL-26482 connectors have gold plating, .0050 inches over nickel. See page 20 and call Amphenol for further information. Flex Circuitry Flex termination assemblies for attaching cylindrical connectors to printed circuit boards are available through the Amphenol division ACT, Advanced Circuit Technology. Flex can be used with miniature 26482 connectors and it can be designed to meet specific length, current carrying capacity and to fit the precise geometric shape of the connector to board package. Flex circuity plugs into a printed circuit board and creates a self-locking terminal pad which eliminates the need for an additional interconnect to the PCB. Filter Protection Amphenol offers the FPT Series which combines the miniature PT series with an EMI filter. Designed to provide EMI protection for sensitive circuits, each circuit is individually filtered within the connector, eliminating the need for costly and bulky exterior network filters. Filter contacts are available in MF, HF, VHF, and UHF ranges and are intermateable and intermountable with MIL-DTL-26482 connectors. For further information see catalog 12-120, Amphenol EMI Filter Transient Protection Connectors. PT Connector with Flex PT Connector with EMI Filter Protection Overmolded Cable Overmold seals and cables can be designed for almost any industrial application. A variety of materials are available: neoprene, hypalon and others; and a variety of lengths can be designed to meet customer specifications. Overmold seals to the rear of the connector and to the cable jacket providing moisture sealing. 2 PT Connector with Overmolded Cable Amphenol Miniature Cylindrical connector selection guide The accompanying chart is provided to assist the user in selecting the appropriate type of miniature connector to meet the application requirements. Further information can be found in specific sections of this catalog. Solder CHARACTERISTICS Intermateable Contacts Contact Retention System Coupling Solder Crimp PT MS/PT SP MS/ PT-SE PT-SE O O O O O * * * * * * * * * * * * * * *** Crimp Ri/FR Non-Removable * * * Removable Bayonet * * Olive Drab Cadmium (003) * * * Standard Finishes Anodic Coated (005) Temperature Range * * Resilient Dielectric (-55C to +125C) * Wide Mounting Flange * * Hermetic Seal * * * Wall Mounting Receptacle "00" * * * Cable Connecting Receptacle "01"*** * * Box Mounting Receptacle "02" ** * SHELL STYLE AVAILABILITY * * * * *** Straight Plug "06" * * * * * Jam Nut receptacle "07" ** ** * * * thru-bulkhead Receptacle "TB" * Solder Mount Receptacle "I" ** 90 Plug "08" * * ** * RI/FR = Rear Insertion/Front Releasable o intermates with o Optional finishes available. See "how to order" sections. * Available in hermetic version ** Dual mounting holes *** This connector style is sometimes referred to as a cable connecting "plug." It does, however, mate with either a straight or 90 degree plug. 3 * Amphenol Miniature Cylindrical insert availability Solder Termination Insert Arrangement Crimp Termination Screw Termination MS/PT-SE PT-SE SP-SE PT Contact Size Total Contacts SP Hermetic PT MS-PT X X X* 1 1 I X X X 2 2 I X X X 3 3 I X X X 4 4 I X X X 3 3 I 8-98 X X 3 3 10-2 X X 2 X X X* X X X 10-7 X X X 10-70 X X MS/PT PT 8-2 X 8-3 X 8-4 X 8-33 X 6-1 10-5 10-6 X X 16 12 10 8 Coax 12 X X X X* 12-3* X X X X X X X* Service Rating I I 5 5 I 6 6 I 7 7 6 X 8 2 I 1 10-98 12-4 X 20 1 6 Coax I 3 3 II 4 4 I 12-8 X X X X* X 8 8 I 12-10 X X X X X 10 10 I 12-14 X X 14 14 I 12-98 X X 10 10 14-2 X X 2 S S X X X X X 5 8 6 X X 12 8 4 I 1 I 14-4 14-5 X 14-8 I 2 4 II 4 I 5 II X X 14-12 X X X 14-15 X X X X X 15 14 14-18 X X X X* X 18 18 I 14-19 X X X X X 19 19 I X* 5 1 14-71 P X 14-91 HV S X 14-AA X X X X 14-22 16-8 X X X 16-23 X X X 16-26 X X X X X 16-70 4 X* X 16-76 16-99 X X 18-2 X X X X 18-3 X X X 18-5 X X 3 2 4 I 3 I 3 1 4 4 X 8 X 23 22 X 26 26 15 14 X* 14 8 X 23 21 X 8 II 1 I I 1 2 5 18-8 3 5 8 X X X X X 11 18-30 X X X X* X 30 4 8 29 1 N/A 5 *** I 2 3 X* ** I 2 18-11 *Not available in MS version **Flashover voltage 5,000 VAC (RMS) ***1500 VAC (RMS) S designates Socket insert only. I II II II I 11 II 1 I P designates Pin insert only. Size 12 contacts for #10 wire Not presently tooled Contacts must be ordered separately Amphenol Miniature Cylindrical insert availability, cont. Solder Termination Insert Arrangement Crimp Termination Contact Size MS/PT PT SP Hermetic PT MS-PT MS/PT-SE PT-SE SP-SE Total Contacts X X X X X 32 18-72 X X 14 18-75 X X 4 X X 18-32 18-71 X* 18-76 20 18-91 HV 20-16 X X X 20-24 X X 9 8 X* 6 6 X 16 X 24 24 X 25 25 20-26 X X 26 26 20-27 X X X 27 27 20-39 X X X X X 39 39 20-41 X X X X X 41 41 14 10 7 7 X X X X X X X X X X 22-34 X 22-36 X Coax, I ** II I I 6 I I 2 I I 4 Coax Hi-Voltage 25 X 32 32 I X 34 34 I X 36 36 I X 41 27 22-55 X X X X X 55 55 X X 19 13 9 2 X X 19 12 22-71 X* 22-78 22-96 X* X X X X X X 24-79 *Not available in MS version **Flashover voltage 5,000 VAC (RMS) ***1500 VAC (RMS) II 25 I 14 I I 4 7 6 I, Coax 7 I, Coax 3 N/A 7 Coax II 7 31 X* 51 47 X 61 61 49 45 1 1 Coax 21 7 31 24-51 X II 2 X* X 24-71 1 21 X 24-61 N/A X X X X Coax 7 X 24-31 4 7 22-41 22-72 Coax, II X* 22-25 22-70 Service Rating 1 16 X 22-7 8 4 3 6 X 20-90 HV 12 I 10 8 20-70 Coax 32 20-25 22-32 12 4 18-80 22-21 16 I 4 I I 2 2 N/A 5 Coax Size 12 contacts for #10 wire Not presently tooled Contacts must be ordered separately 5 Amphenol Miniature Cylindrical alternate positioning A To avoid cross-plugging problems in applications requiring the use of more than one miniature cylindrical connector of the same size and arrangement, alternate insert rotations are available as indicated in the accompanying chart. B A B Position W Position X Position Z Insert Rotation Degrees W Position Y Views looking into front face of pin insert or rear of socket insert. Insert Rotation Insert Arrangement A B A As shown in the diagram at right, the front face of the pin insert is rotated within the shell in a clockwise direction from the normal shell key. The socket insert would be rotated counterclockwise the same number of degrees in respect to the normal shell key. Shell Size B Alternate Positioning X Y Z Shell Size Insert Arrangement Degrees W X Y Z 6 6-1 - - - - 18 18-5 55 97 263 315 8 8-2* 58 122 - - 18 18-8 180 - - - 8 8-3 60 210 - - 18 18-11* 62 119 241 340 8 8-4* 45 97 184 - 18 18-30* 180 193 285 350 8 8-33* 90 - - - 18 18-32* 85 138 222 265 8 8-98 - - - - 18 18-71 18 108 127 215 10 10-2 45 90 315 - 18 18-72 53 102 213 293 10 10-5* 45 151 180 270 18 18-75 45 - - - 10 10-6* 90 - - - 18 18-76 - - - - 10 10-7 90 - - - 18 18-80 45 90 135 160 10 10-70 - - - - 18 18-91HV 90 180 240 270 10 10-98* 90 180 240 270 20 20-16* 238 318 333 347 12 12-3 - - 180 - 20 20-24 70 145 215 290 12 12-4* 38 - - - 20 20-25 72 144 216 288 12 12-8 90 112 203 292 20 20-26 13 107 210 322 12 12-10* 60 155 270 295 20 20-27 72 144 216 288 12 12-14 - - - - 20 20-39* 63 144 252 333 12 12-98* 61 135 189 340 20 20-41* 45 126 225 - 14 14-2 58 122 - - 20 20-70 63 135 222 335 14 14-4* 45 - - - 20 20-90 45 135 225 315 14 14-5* 40 92 184 273 22 22-7 19 41 - - 14 14-8 48 162 189 312 22 22-21* 16 135 175 349 14 14-12* 43 90 - - 22 22-25 60 125 211 336 14 14-15* 17 110 155 234 22 22-32 72 145 215 288 14 14-18* 15 90 180 270 22 22-34 62 142 218 298 288 14 14-19* 30 165 315 - 22 22-36 72 144 216 14 14-22 45 - - - 22 22-41 39 135 264 - 14 14-71 - - - - 22 22-55* 30 142 226 314 14 14-91HV - 60 - - 22 22-70 30 82 218 312 14 14-AA* 45 - - - 22 22-71 33 191 236 270 16 16-8* 54 152 180 331 22 22-72 42 200 277 339 16 16-23 158 270 - - 22 22-78 19 41 - - 16 16-26* 60 - 275 338 22 22-96* 19 41 - - 16 16-70 41 122 216 286 24 24-31 90 225 255 - 16 16-76 - - - - 24 24-51 22 171 313 - 16 16-99* 66 156 223 340 24 24-61* 90 180 270 324 18 18-2 58 122 - - 24 24-71 39 131 205 281 18 18-3 - - 180 - 24 24-79 - - - - 6 * Available in Hermetic Class Amphenol Miniature Cylindrical insert arrangements D C A B Insert Arrangement A B A C A C C B B B B A A 6-1 8-2 8-3 8-4 8-33 8-98 Service Rating I I I I I I I Number of Contacts 1 2 3 4 3 3 2 Contact Size 20 20 20 20 20 20 16 E D F D C D Insert Arrangement E B E B C A A A F A 10-2 C B A C D B C B 10-5 10-6 10-7 10-70 10-98 12-3 12-4 I I I COAX I II I Service Rating Number of Contacts 5 6 7 1 6 3 4 Contact Size 20 20 20 8 COAX 20 16 16 G H A F H E G B A K B A J C C Insert Arrangement 12-8 D E A H G K R N 12-10 A C F H L M K J F D B E D F J E P 12-14 B C D A C B B E D C D 12-98 14-2 14-4 14-5 Service Rating I I I I II I II Number of Contacts 8 10 14 10 2 4 5 Contact Size 20 20 20 20 12 12 16 A H G D J K L A M R C L E D J N S P R F 14-18 I A M L B U G 14-15 I A T H E F 14-12 I K D P G L M B N C H F 14-8 Service Rating K B M E Insert Arrangement J G C F A H B E C D N K J P V U S G C R T H A B A D B B E D C D E C F 14-19 14-22 14-71 I I Number of Contacts 6 2 8 4 14 1 18 19 1 4 3 1 Contact Size 20 12 20 16 20 16 20 20 20 12 16 8 COAX 7 I I Amphenol Miniature Cylindrical insert arrangements A A A N G D M B L H C F B B C C Insert Arrangement E P A S Z X M D J D C U W V H G E K F U b Y V W X J 14-91HV 14-AA 16-8 16-23 16-26 I II I I Number of Contacts 3 4 8 22 1 26 Contact Size 20 12 16 20 16 20 A A B G N N J L P N C J F E Insert Arrangement H C R M M K G D L D M L E Y A R P B K H P S X U C D V W E F K J F H G 16-70 16-76 16-99 18-2 18-3 N/A Flashover 1,500 VAC (RMS) I II II Service Rating F B T Z E G H Flashover 5,000 VAC (RMS) Service Rating C D c Z L B T N a T K A R S P B R Y Number of Contacts 14 1 8 1 5 21 2 2 3 Contact Size 20 12 COAX 20 12* 2 COAX 20 16 8 10 *Contact Positions Optional A J G A H E B D C R P B K H C L G Insert Arrangement F D f g a D E C U e D V Z L E B T b M C d c N F A S A B K Y E W X F G H J 18-5 18-8 18-11 Service Rating II I II Number of Contacts 5 8 11 29 1 Contact Size 12 12 16 20 16 T S R P N j g Y a Z H J A B K J D X h b K Service Rating C W c L H B V f d M Insert Arrangement A U e 18-30 I A L J G B C P E C H F F G N G D F E D A C B M D E 18-32 18-71 18-72 18-75 I II, COAX N/A COAX Number of Contacts 32 8 1 10 4 4 Contact Size 20 16 8 COAX 20 12 COAX 8 COAX 8 Amphenol Miniature Cylindrical insert arrangements L A A H B D B M B N S C C J F G C A K A E P R B D H F D D E Insert Arrangement Number of Contacts C E F 18-76 18-80 18-91 HV 20-16 II I, COAX Flashover 5,000 VAC (RMS) II Service Rating Contact Size G 3 1 6 2 6 16 12 COAX 8 COAX 20 8 COAX 20 16 L W K a V J H N X U G S L V R T E P N U a F D M B a W c b Z X P C 20-25 N D B a b d Y c G X K J J G H 20-26 20-27 I 25 20 6 27 Contact Size 20 20 20 12 20 W T S A C Z m r h V Y k i a R P g N q M c Service Rating d e L Insert Arrangement b n p f K J A W B X U D E F T I B m s h t g R G P H N d M H H c e C G J F B E D N F K L G G b p q M F n f B P a r S A A E Z I L J D Y k i K C X j E 20-39 20-41 20-70 20-90 I I COAX HI-VOLTAGE 37 2 41 10 4 7 Contact Size 20 16 20 20 8 COAX 20 A F P A N M B C X E C S D D U J S a D E F G H J d D U X H V W F G 22-7 22-21 22-25 COAX II I I 7 21 25 32 8 COAX 16 16 20 9 T e f Y V J B S C j g Z K U W R c h L T a A P b M C E F G Contact Size B Z b K T H Number of Contacts X L V K Y M R W N A R N B P L G Service Rating C D Number of Contacts Insert Arrangement F V W I V E U L 24 j D T Number of Contacts U C S Z M E F H Y K H J T A R A V L G K E S D Z 20-24 Service Rating C b F Insert Arrangement U Y C R T B S X W M P Z P N B Y A R A M 22-32 E Amphenol Miniature Cylindrical insert arrangements A T S d R N k b R C V e c P h M M F K Insert Arrangement b L H J K E T Z d g G e N i N M FF f e g L 22-36 22-41 I I Number of Contacts 34 36 27 14 55 Contact Size 20 20 20 16 20 H B U L N S E B C G U T P N M D F E E C D 22-70 Service Rating L G C G F V H F Insert Arrangement S R E H B J G D R A A K B C P J I J F V T K 22-55 A A D 22-71 i, COAX 22-72 I, COAX 22-78 N/A COAX Number of Contacts 12 6 2 7 12 4 3 7 Contact Size 20 8 COAX 20 8 COAX 20 16 8 COAX 8 COAX M L A A N Z F Y B E R c d V H V U S T G B c d BB z w x R m P h i n j k M N G g H J K V GG r U q T FF EE p S L P BB m k N M 22-96 24-31 24-51 Service Rating II I I Number of Contacts 7 31 47 4 61 12 for #10 WIRE 16 20 12 COAX 20 Contact Size a Z Y W r B b u d e p U f m x S R Insert Arrangement Service Rating k P v w i j N M h L L J K I Contact Size A 20 F g G n T D E j 24-61 Symbol D AA BB H i Contact Legend F C c z y q V A t s X G h AA CC F g z DD E f y KK LL n R PP D e x JJ NN C d w HH MM B c v u s A b a t W F f p X E e v CC q Y D AA DD Z C y S F D Insert Arrangement s T E U A b u r D a t W C g W C X Q b e J Y P f X G Z B a K G H J I M c d K 22-34 Service Rating F b u v E a t w D Z s DD x M Y r CC EE K L BB HH y J P X q GG h H f R G H J p q h F j C W p AA z P B V n m k R E c t S F b n s D A U T S C m r X Y a U B a i D A Z k j V W j k W C h l c G Z L X V g m d Y a Y B n N E X g j f e P D A U W f l T S B U 16 E C B 12 H J K HV 24-71 24-79 N/A COAX Number of Contacts 45 2 2 1 Contact Size 20 16 8 COAX 20 12 COAX 5 10 8 COAX 8 COAX Amphenol PT, SP, MS/PT Proprietary/MIL-DTL-26482, Series 1 bayonet coupling and solder termination wall mounting receptacle cable connecting receptacle* box mounting receptacle straight plug Amphenol(R) solder contact miniature cylindrical connectors meet the most critical application needs. Design versatility combined with high reliability performance makes these series of Miniature Cylindrical Connectors ideal for environmental sealing or pressurized applications. The MS/PT Series is qualified to MIL-DTL-26482, Series 1 and has all the outstanding design characteristics and quality of the PT Series. The SP Series is a modification of the PT, providing special shells with a wide mounting flange for back panel mounting. A corrosion resistant electrically conductive finish of cadmium plate with an olive drab chromate after-treatment is used on the PT and MS/PT. The SP is given a durable non-conductive hard anodic "Alumilite"(R) coating which provides abrasion protection and resistance to corrosion. **NEW** 500 hour corrosion resistance, RoHS compliant harsh environment conductive plating. Gray Zinc over an Electroless Nickel (Gray ZnNi) base, with a Light Gun Metal Gray appearance. Shell components for these series are aluminum. The dependable 5 key/keyway polarization with bayonet lock coupling assures positive mating with no chance of cross plugging. Spring tension provided by a wave washer in the coupling nut ensures maintenance of interfacial seal between mating halves. Both the insert and main joint gasket are molded from resilient neoprene. This provides excellent moisture sealing at the gasket and superior electrical isolation of the contact in the insert. Both pins and sockets are machined from a copper alloy and are gold plated. This gold plating eliminates contact corrosion and offers an indefinite shelf life. Socket contacts for these series are a closed entry design. A breakaway style plug is available in the PT solder series. Hermetics receptacles are available in PT and MS/ PT solder series. Receptacles with printed circuit board contacts are also available. PT Solder is UL recognized under file #E115497, Vol. 1, Sec. 5. The PT, SP and MS/PT Series are intermateable and intermountable with all existing Miniature Cylindrical Series connectors. Refer to pages 4-10 for insert arrangement availability. PT, SP, MS/PT Table 1: CONTACT DATA/CONNECTOR RATINGS Contact Specifications jam nut receptacle Contact Size Test Current Maximum Millivolt Drop 20 7.5 55 Solder Well Diameter .046 16 13.0 50 .078 12 23.0 42 .116 +.004 -.000 +.005 -.003 +.004 -.002 Solder Well Depth +.031 .125 -.000 +.031 -.000 +.031 -.000 .188 .188 Service Rating thru bulkhead receptacle Service Rating Recommended Operating AC Voltage at Sea Level Sea Level 50,000 ft. 70,000 ft. 110,000 ft. I 600 1,500 500 375 200 II 1,000 2,300 750 500 200 11 Test Voltage AC (RMS), 60 cps Silver plated wire per MIL-DTL-26482 * This connector style is sometimes referred to as a cable connecting "plug." It does, however, mate with a straight or 90 degree plug. Amphenol PT, SP, MS/PT Proprietary/MIL-DTL-26482, Series 1 bayonet coupling and solder termination, cont. PT, SP Service Classes PT and SP connectors are available in the service classes listed below. Each class, with the exception of hermetic, offers one or more means of terminating or supporting a cable or wire bundle. General duty; back shell is threaded for conduit attachment of MS3057 cable clamp "A" (SR) General duty, with strain relief clamp for cable or wire bundle support "C" Pressurized receptacle; less than 1 cu. in. per hour leakage at 30 psi over a temperature range of -65F to +257F "E" Environmental resistant connectors - supplied with a multi-holed grommet and clamping nut for moisture-proofing individual open wires "E" (SR) Environmental resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support "P" Translucent nylon boot for retaining customerapplied potting compounds; held in place by a threaded ring "P" (SR) Strain relief clamp suitable for retaining customer applied potting compounds, with provision for wire support "PG" Compressing cable gland for moisture proofing jacketed cables. "H"* Hermetically sealed with compression glass inserts (see pages 22-25) "A" general duty "A" "E" (SR), MS/"F" strain relief "E", MS/"E" open wire seal Style with printed circuit board contacts- see page 20. MS/PT Service Classes The MS/PT Miniature connector is available in the following certified service classes: "E" "F" "J" "P" Environmental resistant connectors - supplied with a multi-holed grommet and clamping nut for moisture-proofing individual open wires Grommet seal with strain relief clamp Compressing clamp and neoprene gland for moisture proofing multi-conductor jacketed cable and strain relief. Telescoping sleeves (MS 3420A) can be used to adapt to cables smaller than minimum close-down. Translucent nylon boot for retaining customerapplied potting compounds; held in place by a threaded ring "P" MS/ "P" potting boot "PG" cable gland seal 12 PT00 (MS3110) SP00 wall mounting receptacle S R L PT .120 .005 Dia. (.147 .005 Dia., size 24) SP .150 .005 Dia. (TP) 4 Holes R S "PG" Cable Gland Seal A (TP) K TERMINATION ASSEMBLIES "A" General Duty/ "C" Pressurized" L "A" (SR), "E" (SR), "P" (SR), MS / "F" Strain Relief N "E" Open Wire Seal GDH N D L Z "P" Potting Boot N N N D "J" Cable Seal PT00A-XX-XXX SP00A-XX-XXX PT00C-XX-XXX PU XL C .375 MIN D PT00PG-XX-XXX L L L V Q M PT00A-XX-XXX (SR) SP00A-XX-XXX (SR) PT00E-XX-XXX (SR) SP00E-XX-XXX (SR) PT00P-XX-XXX (SR) SP00P-XX-XXX (SR) MS3110F-XX-XXX PT00E-XX-XXX SP00E-XX-XXX MS3110E-XX-XXX PT00P-XX-XXX SP00P-XX-XXX MS3110P-XX-XXX N D RELEASED / Dec . 21 2015, 2:09:12 PM MS3110J-XX-XXX To complete part number see how to order on page 25. (MMC) located within .0025 of (TP) Receptacle Front View Shell Size 6 8 10 12 14 16 18 20 22 24 R (TP) S Max. Receptacle Side View PT SP PT SP A +.001 -.005 .469 .594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 .641 .734 .812 .938 1.031 1.125 1.203 1.297 1.375 1.500 .688 .812 .938 1.031 1.125 1.219 1.312 1.438 1.562 1.688 .953 1.047 1.125 1.250 1.344 1.438 1.516 1.672 1.750 1.875 .348 .473 .590 .750 .875 1.000 1.125 1.250 1.375 1.500 K +.020 -.010 PT SP .524 .524 .524 .524 .524 .524 .524 .650 .650 .650 6 8 10 12 14 16 18 20 22 24 .906 .906 .906 .906 .906 .906 .906 1.125 1.125 1.125 Class "A", "C" Z Max. PT SP Q Thread Class 2A .431 .431 .431 .431 .431 .431 .431 .556 .556 .589 .462 .462 .462 .462 .462 .462 .462 .556 .556 .556 .3125-32 NEF .4375-28 UNEF .5625-24 NEF .6875-24 NEF .8125-20 UNEF .9375-20 UNEF 1.0625-18 NEF 1.1875-18 NEF 1.3125-18 NEF 1.4375-18 NEF L Max. .493 .493 .493 .493 .493 .493 .493 .650 .650 .650 Class "A" (SR), "E" (SR), "P" (SR), MS/"F" Shell Size M +.010 -.000 Class "e", MS/"E" PT SP .468 .468 .468 .468 .468 .468 .531 .531 .531 .498 .438 .438 .438 .438 .438 .438 .438 .531 .531 .498 Class "P", MS/"P" D Min. L Max. N Max. V Thread Class A .175 .297 .421 .546 .663 .787 .879 1.014 1.134 1.259 1.553 1.553 1.553 1.553 1.553 1.553 1.553 1.703 1.703 1.765 .462 .590 .717 .834 .970 1.088 1.216 1.332 1.460 1.585 .3750-32 NEF .5000-28 UNEF .6250-24 NEF .7500-20 UNEF .8750-20 UNEF 1.0000-20 UNEF 1.1875-18 NEF 1.1875-18 NEF 1.4375-18 NEF 1.4375-18 NEF Class "J" D Class "PG" C Thread D Min. G Max. H Max. L Max. N Max. L Max. N Max. D Min. L Max. N Max. Closed Free N Max. XL Max. B Thread L Max. 6-32 6-32 6-32 6-32 6-32 8-32 8-32 8-32 8-32 .240 .302 .428 .552 .615 .740 .740 .928 .990 .125 .188 .312 .375 .500 .625 .625 .750 .800 .812 .875 1.000 1.125 1.188 1.438 1.438 1.625 1.719 1.922 1.922 1.922 1.922 2.047 2.078 2.344 2.344 2.406 .550 .675 .803 .920 1.047 1.165 1.290 1.418 1.543 1.266 1.266 1.266 1.266 1.266 1.266 1.266 1.516 1.516 1.578 .440 .560 .685 .813 .930 1.057 1.175 1.301 1.430 1.555 .192 .317 .434 .548 .673 .798 .899 1.024 1.149 1.274 1.438 1.438 1.438 1.438 1.438 1.438 1.438 1.656 1.656 1.717 .484 .608 .734 .858 .984 1.110 1.234 1.360 1.484 1.610 .168 .205 .338 .416 .550 .600 .635 .670 .740 .230 .312 .442 .539 .616 .672 .747 .846 .894 .547 .675 .812 .940 1.067 1.194 1.322 1.449 1.576 2.271 2.271 2.411 2.599 2.943 3.172 3.610 3.766 3.985 M12x1.5-6H M16x1.5-6H M16x1.5-6H M18x1.5-6H M22x1.5-6H M25x1.5-6H M25x1.5-6H M32x1.5-6H M32x1.5-6H .936 .936 .936 .936 .936 .936 1.180 1.180 1.180 All dimensions for reference only. 13 PT01 (MS3111) cable connecting receptacle L S M Y S "PG" Cable Gland Seal Q A L K Z N TERMINATION ASSEMBLIES "A" General Duty L "A" (SR), "E" (SR), "P" (SR), MS / "F" Strain Relief "E" Open Wire Seal PT01PG-XX-XXX L L L V D "P" Potting Boot "J" Cable Seal N D GD H N N N D XL C .375 MIN PT01A-XX-XXX (SR) PT01E-XX-XXX (SR) PT01P-XX-XXX (SR) MS3111F-XX-XXX PT01A-XX-XXX PT01E-XX-XXX MS3111E-XX-XXX PT01P-XX-XXX MS3111P-XX-XXXX N D RELEASED / Dec . 21 2015, 2:09:12 PM Note: This connector style is sometimes referred to as a cable connecting "plug". It does, however, mate with either a straight or 90 degree plug. To complete part number see how to order on page 25. Receptacle Front View Shell Size Receptacle Side View K +.020 -.010 S .020 Y .020 A +.001 -.005 6 .688 .812 .348 .494 .906 8 .812 .938 .473 .494 .906 10 .938 1.062 .590 .494 12 1.031 1.156 .750 .494 14 1.125 1.250 .875 16 1.219 1.344 1.000 18 1.312 1.438 1.125 20 1.438 1.562 1.250 22 1.562 1.688 24 1.688 1.812 M +.016 -.000 C Thread D Min. Class "A", "C" Q Thread Class 2A Z Max. D Min. L Max. N Max. .400 .3125-32 NEF .948 .175 1.553 .462 .3750-32 NEF .400 .4375-28 UNEF .948 .297 1.553 .590 .5000-28 UNEF .906 .400 .5625-24 NEF .948 .421 1.553 .717 .6250-24 NEF .906 .400 .6875-24 NEF .948 .546 1.553 .834 .6250-24 NEF .494 .906 .400 .8125-20 UNEF .948 .663 1,553 .970 .8750-20 UNEF .494 .906 .400 .9375-20 UNEF .948 .787 1.553 1.088 1.0000-20 UNEF .494 .906 .400 1.0625-18 NEF .948 .879 1.553 1.216 1.1875-18 NEF .650 1.125 .535 1.1875-18 NEF 1.166 1.041 1.703 1.332 1.1875-18 NEF 1.375 .650 1.125 .535 1.3125-18 NEF 1.166 1.135 1.703 1.460 1.4375-18 NEF 1.500 .683 1.188 .568 1.4375-18 NEF 1.166 1.259 1.703 1.585 1.4375-18 NEF L Max. Class "A" (SR), "E" (SR), "P" (SR), MS/"F" Shell Size MS3116J-XX-XXX G Max. H Max. L Max. N Max. Class "e", MS/"E" Class "P", MS/"P" L Max. N Max. D Min. L Max. N Max. V Thread Class A Class "J" D Closed Free Class "PG" N Max. XL Max. B Thread L Max. 6 - - - - - - 1.266 .440 .192 1.438 .484 - - - - - - 8 6-32 .240 .125 .812 1.922 .550 1.266 .560 .317 1.438 .608 .168 .230 .547 2.271 M12x1.5-6H .936 10 6-32 .302 .188 .875 1.922 .675 1.266 .685 .434 1.438 .734 .205 .312 .675 2.271 M16x1.5-6H .936 12 6-32 .428 .312 1.000 1.922 .803 1.266 .813 .548 1.438 .548 .338 .442 .812 2.411 M16x1.5-6H .936 14 6-32 .552 .375 1.125 1.922 .920 1.266 .930 .673 1.438 .673 .416 .539 .940 2.599 M18x1.5-6H .936 16 6-32 .615 .500 1.188 2,047 1.047 1.266 1.057 .798 1.438 .798 .550 .616 1.067 2.943 M22x1.5-6H .936 18 8-32 .740 .625 1.438 2.078 1.165 1.266 1.175 .899 1.438 .899 .600 .672 1.194 3.172 M25x1.5-6H .936 20 8-32 .740 .625 1.438 2.344 1.290 1.516 1.301 1.024 1.656 1.024 .635 .747 1.322 3.610 M25x1.5-6H 1.180 22 8-32 .928 .750 1.625 2.344 1.418 1.516 1.430 1.149 1.656 1.149 .670 .846 1.449 3.766 M32x1.5-6H 1.180 24 8-32 .990 .800 1.719 2.406 1.543 1.516 1.555 1.274 1.717 1.274 .740 .894 1.576 3.985 M32x1.5-6H 1.180 All dimensions for reference only. 14 PT02 (MS3112) SP02 box mounting receptacle S R (TP) L PT .120 .005 Dia. (.147 .005 Dia., size 24) M SP .150 .005 Dia. R S (TP) 4 Holes A N K Z PT02A-XX-XXX SP02A-XX-XXX * PT02C-XX-XXX * SP02C-XX-XXX * PT02E-XX-XXX * SP02E-XX-XXX MS3112E-XX-XXX * PT02P-XX-XXX * SP02P-XX-XXX MS3112P-XX-XXX To complete part number see how to order on page 25. (MMC) located within .0025 of (TP) * The PT02 and SP02 box mounting receptacles are made only to complete a series; no provision is made for accessories or potting on the rear skirt. Receptacle Front View Shell Size R (TP) Receptacle Side View S A +.001 -.005 K +.020 -.010 M +.031 -.000 L Max. N Dia. Max. Z Max. PT SP PT SP PT SP PT SP PT SP 6 .469 .641 .688 .953 .348 .493 .524 .825 .431 .462 .323 .465 .438 8 .594 .734 .812 1.047 .473 .493 .524 .825 .431 .462 .449 .465 .438 10 .719 .812 .938 1.125 .590 .493 .524 .825 .431 .462 .573 .465 .438 12 .812 .938 1.031 1.250 .750 .493 .524 .825 .431 .462 .699 .465 .438 14 .906 1.031 1.125 1.344 .875 .493 .524 .825 .431 .462 .823 .465 .438 16 .969 1.125 1.219 1.438 1.000 .493 .524 .825 .431 .462 .949 .465 .438 18 1.062 1.219 1.312 1.516 1.125 .493 .524 .825 .431 .462 1.073 .465 .438 20 1.156 1.312 1.438 1.672 1.250 .650 .650 1.076 .556 .556 1.199 .526 .531 22 1.250 1.438 1.562 1.750 1.375 .650 .650 1.076 .556 .556 1.323 .526 .531 24 1.375 1.562 1.688 1.875 1.500 .683 .683 1.109 .589 .589 1.449 .493 .497 All dimensions for reference only. 15 PT06 (MS3116) SP06 S straight plug "PG" Cable Gland Seal TERMINATION ASSEMBLIES "A" General Duty "A" (SR), "E" (SR), "P" (SR), MS / "F" Strain Relief L "E" Open Wire Seal "P" Potting Boot L L L V L N D PT06PG-XX-XXX N D GDH N N N D "J" Cable Seal C .375 MIN PT06A-XX-XXX SP06A-XX-XXX PTG06A-XX-XXX PT06A-XX-XXX (SR) SP06A-XX-XXX (SR) PTG06A-XX-XXX (SR) PT06E-XX-XXX (SR) SP06E-XX-XXX (SR) PTG06E-XX-XXX (SR) PT06P-XX-XXX (SR) SP06P-XX-XXX (SR) PTG06P-XX-XXX (SR) MS3116F-XX-XXX PT06E-XX-XXX SP06E-XX-XXX PTG06E-XX-XXX MS3116E-XX-XXX PT06P-XX-XXX SP06P-XX-XXX PTG06P-XX-XXX MS3116P-XX-XXX XL N D RELEASED / Dec . 21 2015, 2:09:12 PM MS3116J-XX-XXX To complete part number see how to order on page 25. Shell Size Plug Front View Plug Side View S Max. J L Max. 6 .625 .353 8 .750 .353 10 .859 .353 12 1.013 .353 Class "A" Q Thread Class 2A Z Max. D Min. L Max. N Max. V Thread Class A .906 .3125-32 NEF .594 .175 1.609 .462 1.4375-18 NEF .906 .4375-28 UNEF .594 .297 1.609 .590 .5000-28 UNEF .906 .5625-24 NEF .594 .421 1.609 .717 .6250-24 NEF .906 .6875-24 NEF .594 .546 1.609 .834 .7500-20 UNEF 14 1.156 .353 .906 .8125-20 UNEF .594 .663 1.609 .970 .8750-20 UNEF 16 1.281 .353 .906 .9375-20 UNEF .594 .787 1.609 1.088 1.0000-20 UNEF 18 1.391 .353 .906 1.0625-18 NEF .594 .879 1.609 1.216 1.1875-18 NEF 20 1.531 .415 1.062 1.1875-18 NEF .672 1.014 1.656 1.332 1.1875-18 NEF 22 1.656 .415 1.062 1.3125-18 NEF .672 1.135 1.656 1.460 1.4375-18 NEF 24* 1.776 .415 1.125 1.4375-18 NEF .672 1.259 1.750 1.587 1.4375-18 NEF Class "A" (SR), "E" (SR), "P" (SR), MS/"F" Shell Size Class "e", MS/"E" Class "P", MS/"P" Class "J" D Class "PG" C Thread D Min. G Max. H Max. L Max. N Max. L Max. N Max. D Min. L Max. N Max. Closed Free N Max. XL Max. B Thread L Max. 6 - - - - - - 1.266 .440 .192 1.438 .484 - - - - - - 8 6-32 .240 .125 .812 1.922 .550 1.266 .560 .317 1.438 .608 .168 .230 .547 2.271 M12x1.5-6H .936 10 6-32 .302 .188 .875 1.922 .675 1.266 .685 .434 1.438 .734 .205 .312 .675 2.271 M16x1.5-6H .936 12 6-32 .428 .312 1.000 1.922 .803 1.266 .813 .548 1.438 .858 .338 .442 .812 2.411 M16x1.5-6H .936 14 6-32 .552 .375 1.125 1.922 .920 1.266 .930 .673 1.438 .984 .416 .539 .940 2.599 M18x1.5-6H .936 16 6-32 .615 .500 1.188 2.047 1.047 1.266 1.057 .798 1.438 1.110 .550 .616 1.067 2.943 M22x1.5-6H .936 18 8-32 .740 .625 1.438 2.078 1.165 1.266 1.175 .899 1.438 1.234 .600 .672 1.194 3.172 M25x1.5-6H .936 20 8-32 .740 .625 1.438 2.344 1.290 1.516 1.301 1.024 1.656 1.360 .635 .747 1.322 3.610 M25x1.5-6H 1.180 22 8-32 .928 .750 1.625 2.344 1.418 1.516 1.430 1.149 1.656 1.484 .670 .846 1.449 3.766 M32x1.5-6H 1.180 24 8-32 .990 .800 1.719 2.406 1.543 1.578 1.555 1.274 1.717 1.610 .740 .894 1.576 3.985 M32x1.5-6H 1.180 All dimensions for reference only. 16 PT07 (MS3114) SP07 jam nut receptacle M S H S M Z N J A P Recept. Front View "P" Potting Boot M C L P R PT07A-XX-XXX (SR) SP07A-XX-XXX (SR) PT07E-XX-XXX (SR) MS3114F-XX-XXX J Flat +.000 -.010 K +.011 -.010 H .016 S M 6 .625 .812 .348 .405 .125 8 .750 .938 .473 .530 .125 10 .875 1.062 .590 .655 12 1.062 1.250 .750 14 1.188 1.375 16 1.312 1.500 18 1.438 1.625 20 1.562 22 1.688 24 1.816 Z D N J A P L PT07P-XX-XXX MS3114P-XX-XXX Receptacle Side View A Dia. +.001 -.005 Class "E", MS/"E" Min. Max. R Thread Class 2A UNEF .696 .062 .125 .4375-28 .231 .568 .696 .604 .191 .696 .062 .125 .5625-24 .231 .568 .696 .729 .191 .125 .696 .062 .125 .6875-24 .231 .568 .696 .854 .191 .818 .125 .696 .062 .125 .8750-20 .231 .568 .696 .979 .191 .875 .942 .125 .696 .062 .125 1.0000-20 .231 .568 .696 1.104 .191 1.000 1.066 .125 .696 .062 .125 1.1250-18 .231 .568 .696 1.229 .191 1.125 1.191 .125 .696 .062 .125 1.2500-18 .231 .568 .696 1.354 .191 1.812 1.250 1.316 .156 .884 .062 .250 1.3750-18 .261 .630 .884 1.510 .221 1.938 1.375 1.441 .156 .884 .062 .250 1.5000-18 .261 .630 .884 1.635 .221 2.062 1.500 1.566 .156 .917 .062 .250 1.6250-18 .228 .660 .917 1.760 .188 Panel Thickness Class "A" (SR), "E" (SR), "P" (SR), MS/"F" C Thread K GD H R L To complete part number see how to order on page 25. Shell Size P Z J A PT07E-XX-XXX SP07E-XX-XXX MS3114E-XX-XXX Shell Size R "A" (SR), "E" (SR), "P" (SR), MS / "F" Strain Relief "E" Open Wire Seal R "A" General Duty/ "C" Pressurized Receptacle PT07A-XX-XXX PT07C-XX-XXX J A TERMINATION ASSEMBLIES M Z D Max. G H L Z Max. L Max. M N Max. Z .040 Class "E" (SR) M C Thread D Max. G H Class "P", MS/"P" L M D Max. L +.010 -.026 M N Z 6 - - - - - - - - - - - - .202 .593 .696 .484 .191 8 6-32 .250 .125 .781 1.062 .696 6-32 .250 .125 .775 1.029 .696 .327 .593 .696 .608 .191 10 6-32 .312 .188 .844 1.062 .696 6-32 .312 .188 .837 1.029 .696 .444 .593 .696 .734 .191 12 6-32 .438 .312 .969 1.062 .696 6-32 .438 .312 .963 1.029 .696 .558 .593 .696 .858 .191 14 6-32 .562 .375 1.094 1.062 .696 6-32 .562 .375 1.087 1.029 .696 .683 .593 .696 .984 .191 16 6-32 .625 .500 1.156 1.188 .696 6-32 .625 .500 1.150 1.161 .696 .808 .593 .696 1.110 .191 18 8-32 .750 .625 1.406 1.188 .696 8-32 .750 .625 1.400 1.161 .696 .909 .593 .696 1.234 .191 20 8-32 .750 .625 1.406 1.250 .884 8-32 .750 .625 1.400 1.224 .884 1.034 .718 .884 1.360 .221 22 8-32 .938 .750 1.594 1.250 .884 8-32 .938 .750 1.587 1.224 .884 1.159 .718 .884 1.484 .221 24 8-32 1.000 .800 1.594 1.250 .917 8-32 1.000 .800 1.681 1.320 .917 1.284 .718 .917 1.610 .188 *Size 24 strain relief available in PT only 17 All dimensions for reference only. PT08 E SP08 E G 90 degree plug TERMINATION ASSEMBLIES "E" Open Wire Seal, "E" (SR) Strain Relief "P" Potting Boot 75 degrees L L E A B PT08E-XX-XXX SP08E-XX-XXX PT08E-XX-XXX (SR) SP08E-XX-XXX (SR) H PT08P-XX-XXX SP08P-XX-XXX D K C To complete part number see how to order on page 25. All lockwire holes are .044 Dia. Min. Plug Front View Shell Size G Dia. Max Plug Side View Class "E", "E" (SR) B .031 C +.010 -.025 Class "P" D .062 E +.047 -.025 L .057 A .025 H .015 K .015 L Max. 8 .796 .655 .169 .941 .339 1.786 .469 .312 .438 1.656 10 .921 .749 .170 1.191 .393 1.880 .547 .438 .562 1.781 12 1.046 .812 .264 1.191 .450 1.965 .625 .516 .688 1.843 14 1.171 .905 .310 1.254 .519 2.113 .734 .625 .781 1.953 16 1.297 1.030 .330 1.316 .583 2.315 .750 .656 .890 2.000 18 1.422 1.015 .444 1.562 .621 2.423 .781 .703 1.000 2.046 20 1.562 1.077 .510 1.625 .683 2.695 .859 .766 1.125 2.218 22 1.672 1.139 .515 1.719 .739 2.742 .906 .812 1.234 2.265 24 1.797 1.265 .656 1.751 .797 2.980 1.169 .918 1.374 2.624 All dimensions for reference only. 18 PT Connectors with Printed Circuit Board Contacts Box Mounting Receptacle (PT02) with PCB Contacts Order by applicable part number in chart below; add insert arrangement number. Refer to insert availability on pages 4-10. (MMC) located within .0025 of (TP) S R (TP) L PT .120 .005 Dia. (.147 .005 Dia., size 24) M SP .150 .005 Dia. R S (TP) 4 Holes A N K Shell Size Part Number* PT02 with PCB Contacts 6 8 Receptacle Front View Z Receptacle Side View R (TP) S +.011 -.010 A +.001 -.005 K +.021 -.010 L Max. M +.031 -.000 N Dia. Max. Z +.040 -.050 71-570120-XXX .469 .688 .348 .493 .825 .431 .323 .380 71-570121-XXX .594 .812 .473 .493 .825 .431 .449 .380 10 71-570122-XXX .719 .938 .590 .493 .825 .431 .573 .380 12 71-570123-XXX .812 1.031 .750 .493 .825 .431 .699 .380 14 71-570124-XXX .906 1.125 .875 .493 .825 .431 .823 .380 16 71-570125-XXX .969 1.219 1.000 .493 .825 .431 .949 .380 18 71-570126-XXX 1.062 1.312 1.125 .493 .825 .431 1.073 .380 20 71-570127-XXX 1.156 1.438 1.250 .650 1.076 .556 1.199 .286 22 71-570128-XXX 1.250 1.562 1.375 .650 1.076 .556 1.323 .286 24 71-570129-XXX 1.375 1.688 1.500 .683 1.109 .589 1.449 .253 All dimensions for reference only. M S H Jam Nut Receptacle (PT07) with PCB Contacts All lockwire holes are .044 Dia. Min. Order by applicable part number in chart below; add insert arrangement number. Refer to insert availability on pages 4-10. S J A R Receptacle Front View Shell Size Part Number* PT02 with PCB Contacts 6 P K Receptacle Side View P Panel Thickness H +.017 -.016 S .010 A Dia. +.001 -.005 J Flat +.000 -.010 K +.011 -.010 M .010 Min. 71-533720-XXX .625 .812 .348 .405 .125 .696 .062 8 71-533721-XXX .750 .938 .473 .530 .125 .696 .062 10 71-533722-XXX .875 1.062 .590 .655 .125 .696 12 71-533723-XXX 1.062 1.250 .750 .818 .125 14 71-533724-XXX 1.188 1.375 .875 .942 .125 16 71-533725-XXX 1.312 1.500 1.000 1.066 18 71-533726-XXX 1.438 1.625 1.125 20 71-533727-XXX 1.562 1.812 22 71-533728-XXX 1.688 1.938 24 71-533729-XXX 1.816 2.062 All dimensions for reference only. Z Max. R Thread Class 2A Z +.025 -.035 .125 .4375-28 UNEF .376 .125 .5625-24 UNEF .376 .062 .125 .6875-24 UNEF .376 .696 .062 .125 .8750-20 UNEF .376 .696 .062 .125 1.0000-20 UNEF .376 .125 .696 .062 .125 1.1250-18 UNEF .376 1.191 .125 .696 .062 .125 1.2500-18 UNEF .376 1.250 1.316 .156 .884 .062 .250 1.3750-18 UNEF .367 1.375 1.441 .156 .884 .062 .250 1.5000-18 UNEF .367 1.500 1.556 .156 .917 .062 .250 1.6250-18 UNEF .334 * For RoHS compliance connectors with PCB contacts change "71"- to: "FL" designates conductive gray zinc nickel plating "93" designates black zinc cobalt plating 19 PTB SPB thru bulkhead receptacle L S R M PTB .120 .005 Dia. (.147 .005 Dia., size 24) SPB .150 .005 Dia. (TP) R S P 4 Holes A A (TP) K * PTB-XX-XXX * SPB-XX-XXX * To complete part number add desired arrangement number (refer to pages 4 and 5 for insert availability) and add "PS"; Example: PTB-18-32PS. If a rotation is required, use PTB-18-32PS and add W, X, Y or Z. Example: PTB-18-32 PSW. The socket end of the insert always appears at the "P" dimension end of shell. (MMC) located within .0025 of (TP) Receptacle Front View Shell Size R (TP) Receptacle Side View S P Max. PTB SPB PTB SPB A +.001 -.005 K +.016 -.000 L .005 M +.010 -.000 PTB SPB 6 .469 .641 .688 .953 .348 .625 1.050 .562 .125 .188 8 .594 .734 .812 1.047 .473 .625 1.050 .562 .125 .188 10 .719 .812 .938 1.125 .590 .625 1.050 .562 .125 .188 12 .812 .938 1.031 1.250 .750 .625 1.050 .562 .125 .188 14 .906 1.031 1.125 1.344 .875 .625 1.050 .562 .125 .188 16 .969 1.125 1.219 1.438 1.000 .625 1.050 .562 .125 .188 18 1.062 1.203 1.312 1.516 1.125 .625 1.050 .562 .125 .188 20 1.156 1.297 1.438 1.672 1.250 .781 1.330 .688 .125 .312 22 1.250 1.375 1.562 1.750 1.375 .781 1.330 .688 .125 .312 24 1.375 1.500 1.688 1.875 1.500 .781 1.330 .688 .125 .312 All dimensions for reference only. 20 PT hermetic solder mounting receptacle Three shell styles are available in the hermetic PT bayonet series: * PTIH (MS3113H) * PT02H * PT07H (MS3114H) These hermetic connectors are only available with solder cup or flat eyelet pin contacts in the MS/PT version. Socket contacts are available in some proprietary PT versions. Other design characteristics of the PT hermetic connector series are as follows: Shell sizes: 8 through 24 (tin plated) Contact count: 2 through 61. Refer to pages 4 and 5 for insert availability for hermetics. Current: 5.0 amp each #20 contact 10 amp each #16 contact 17 amp each #12 contact Contacts are tin plated for PT; gold is optional box mounting receptacle Dielectric Withstanding Voltage (sea level): 1500 volts (RMS) 60 cps, Service Rating I 2300 volts (RMS) 60 cps, Service Rating II Compression glass inserts, permanently lettered Helium Leakage: Less than 1.0 X 10-6 cc/sec. at 15 psi differential Physical Shock: 100 G's Vibration: Exceeds MIL-E-5272 Procedure II Thermal Shock: No deterioration or failure after 5 cycles at -55F to +257F Intermateability: Mates with MS3116 and PT06 Refer to pages 4-10 for insert arrangement availability. jam nut receptacle 21 PTIH (MS3113H) hermetic solder mounting receptacle L G W A N .031 +.006 -.005 Z * PTIH-XX-XXX ** PTIY-XX-XXX ** MS3113H-XXCXXX PTIH-XX-XXX (100) PTIY-XX-XXX (100) MS3113H-XXYXXX To complete part number see how to order on page 25. * Solder cup pin contacts without interfacial seal ** Solder cup pin contacts with interfacial seal Flat eyelet pin contacts without interfacial seal Flat eyelet pin contacts with interfacial seal Recept. Front View Shell Size Receptacle Side View G Dia. Max. A Dia. +.001 -.005 L +.025 -.016 N Dia. +.001 -.005 W +.001 -.010 Z Max. 6 .511 .348 .447 .438 .094 .386 8 .636 .473 .447 .562 .094 .386 10 .761 .590 .447 .672 .094 .386 12 .855 .750 .447 .781 .094 .386 14 .980 .875 .447 .906 .094 .386 16 1.105 1.000 .447 1.031 .094 .386 18 1.229 1.125 .447 1.156 .094 .386 20 1.323 1.250 .509 1.250 .094 .386 22 1.449 1.375 .509 1.375 .125 .418 24 1.574 1.500 .542 1.500 .125 .418 All dimensions for reference only. 22 PT02H hermetic box mounting receptacle PT .120 .005 Dia. (.147 .005 Dia., size 24) S R (TP) L W SP .150 .005 Dia. 4 Holes R S (TP) A N U Z * PT02H-XX-XXX ** PT02Y-XX-XXX PT02H-XX-XXX (100) PT02Y-XX-XXX (100) To complete part number see how to order on page 25. * Solder cup pin contacts without interfacial seal ** Solder cup pin contacts with interfacial seal Flat eyelet pin contacts without interfacial seal Flat eyelet pin contacts with interfacial seal (MMC) located within .0025 of (TP) Recept. Front View Receptacle Side View Shell Size R (TP) S .016 A Dia. +.001 -.005 K .015 L +.025 -.015 N Dia. +.001 -.005 U +.011 -.010 Z Max. 6 .469 .688 .348 .047 .494 .438 .062 .344 8 .594 .812 .473 .047 .494 .562 .062 .344 10 .719 .938 .590 .047 .494 .672 .062 .344 12 .812 1.031 .750 .047 .494 .781 .062 .344 14 .906 1.125 .875 .047 .494 .906 .062 .344 16 .969 1.219 1.000 .047 .494 1.031 .062 .344 18 1.062 1.312 1.125 .047 .494 1.156 .062 .344 20 1.156 1.438 1.250 .047 .556 1.250 .062 .344 22 1.250 1.562 1.375 .079 .556 1.375 .062 .377 24 1.375 1.688 1.500 .079 .588 1.500 .062 .377 All dimensions for reference only. 23 PT07H (MS3114H) hermetic jam nut receptacle S H M Z A S R P K * PT07H-XX-XXX ** PT07Y-XX-XXX ** MS3114H-XXCXXX PT07H-XX-XXX (100) PT07Y-XX-XXX (100) MS3114H-XXYXXX To complete part number see how to order on page 25. * Solder cup pin contacts without interfacial seal ** Solder cup pin contacts with interfacial seal Flat eyelet pin contacts without interfacial seal Flat eyelet pin contacts with interfacial seal Recept. Front View Shell Size Receptacle Side View S .016 H Hex +.017 -.016 A +.001 -.005 K +.043 -.016 M +.031 -.000 P Panel Thickness Min. R Thread Class 2A Max. Z Max. 6 .812 .625 .348 .094 .696 8 .938 .750 .473 .094 .696 .125 .062 .4375-28 UNEF .206 .125 .062 .5625-24 NEF .206 10 1.062 .875 .590 .094 12 1.250 1.062 .750 .094 .696 .125 .062 .6875-24 NEF .206 .696 .125 .062 .8750-20 UNEF .206 14 1.375 1.188 .875 16 1.500 1.312 1.000 .094 .696 .125 .062 1.0000-20 UNEF .206 .094 .696 .125 .062 1.1250-18 NEF .206 18 1.625 1.438 20 1.812 1.562 1.125 .094 .696 .125 .062 1.2500-18 NEF .206 1.250 .125 .884 .250 .062 1.3750-18 NEF 22 1.938 .081 1.688 1.375 .125 .884 .250 .062 1.5000-18 NEF .081 24 2.062 1.812 1.500 .125 .917 .250 .062 1.6250-18 NEF .048 All dimensions for reference only. 24 PT, SP, MS/PT how to order PT,SP Ex: PT00A-20-41PW003 1. 2. 3. 4. 5. 6. 7. 8. Contact Configuration Insert Rotation Finish P W 003 Connector Type Shell Style Service Class Shell Size Insert Arrangement PT 00 A 20 41 3. Service Class 1. Connector Type PT SP PTG standard olive drab, electrically conductive cadmium plate bayonet lock connector with solder contacts electrically non-conductive, hard anodic coated bayonet lock connector with solder contacts and larger flange and mounting holes for back panel mounting plug with grounding fingers No letter is required for normal position General duty back shell C Pressurized receptacle E Environmental resisting open wire seal with grommet and nut P Assembly with potting boot PG 2. Shell Style 7. Insert Rotation A W H Hermetic* without interfacial seal Y Hermetic* with interfacial seal 01 Cable connecting receptacle 02 Box mounting receptacle 4. Shell Size 06 Straight plug Shell sizes 6 - 24 available 07 Jam nut receptacle 08 90 degree plug cable support 5. Insert Arrangement B thru bulkhead receptacle (pressurized) I Solder mount receptacle (Hermetic only) Refer to pages 4-10 for insert availability (Use only the number following the hyphen) Designates a strain relief clamp Indicate optional finishes as follows: 100 P Pin contacts S Socket contacts Suffix added for flat eyelet pin contacts in hermetic versions OR 6. Contact Configuration For ordering connectors with printed circuit board contacts, see pg. 19. MS/PT MIL-DTL-26482, Series 1 Ex: MS3110E20-41PW 005 * Anodic coating - Alumilite(R) (standard on "SP") 023 * Electroless nickel 025 Black zinc cobalt plating 072 * Conductive gray zinc nickel plating 424 * Electroless nickel finish with strain relief 470 Black zinc cobalt plating with strain relief 725 Gray zinc nickel plating with strain relief * RoHS Compliant finish Note: Olive drab cadmium is the default plating. If required on SP type use suffix (003). 1. 2. Connector Type Specification Number Shell Style Service Class MS 311 0 E 1. Connector Type Military standard 2. Specification Number Basic family number for MIL-DTL-26482, Series 1 solder type 3. Shell Style 0 8. Finish SR Wall mounting receptacle 311 Refer to page 6 Y Z Adapter for cable glad for moisture proofing jacketed cables 00 MS X 3. 4. 5. 6. 7. 8. Shell Size Insert Arrangment Contact Configuration Insert Rotation 20 41 P W 4. Service Class 7. Contact Configuration E Environmental resisting connector P Pin contacts F Environmental resisting connectors with strain relief S Socket contacts J Clamp assembly for moisture proofing multi-jacketed cables, with strain relief P Potted type with potting boot H Hermetic Cable connecting receptacle 2 Box mounting receptacle 3 Solder mount receptacle (Hermetic only) 4 Jam nut receptacle 6 Straight plug 8. Insert Rotation No letter is required for normal position Wall mounting receptacle 1 For ordering connectors with printed circuit board contacts, see pg. 19. W 5. Shell Size Shell sizes 8 - 24 available X Y Refer to page 6 Z 6. Insert Arrangement Refer to pages 4-10 for insert availability (Use only the number following the hyphen) Hermetic Version: In this version a letter replaces the hyphen between the Shell Size and Insert Arrangement (Steps 5 and 6) Y Flat eyelet pin contacts C Solder cup pin contacts 25 * Hermetic connectors are supplied with tin plated shells. ** This connector style is sometimes referred to as a cable connecting "plug". It does, however, mate with either a straight or 90 degree plug. Amphenol PT-SE, SP-SE, MS/PT-SE Proprietary/MIL-DTL-26482, Series 1 bayonet coupling and crimp termination wall mounting receptacle Amphenol(R) SE crimp type miniature connectors provide performance and versatility needed for applications demanding high reliability and crimp removable contacts. These crimp contacts are rear insertable/front release and are held in position by an MS approved spring tower retention system. The MS/PT-SE Series is qualified to MIL-DTL-26482, Series 1 and has all the outstanding design characteristics and quality of the PT Series. cable connecting receptacle* box mounting receptacle The SP-SE Series is a modification of the PT-SE, providing special shells with a wide mounting flange for back panel mounting. A corrosion resistant electrically conductive finish of cadmium plate with an olive drab chromate after-treatment is used on the PT-SE and MS/PT-SE. The SP-SE is given a durable non-conductive hard anodic "Alumilite"(R) coating which provides abrasion protection and resistance to corrosion. 500 hour corrosion resistance, RoHS compliant harsh environment conductive plating. Gray Zinc over an Electroless Nickel (Gray ZnNi) base, with a Light Gun Metal Gray appearance. Shell components for these series are aluminum. The dependable 5 key/ keyway polarization with bayonet lock coupling assures positive mating with no chance of cross plugging. Spring tension provided by a wave washer in the coupling nut ensures maintenance of interfacial seal between mating halves. straight plug Both the insert and main joint gasket are molded from resilient neoprene. This provides excellent moisture sealing at the gasket and superior electrical isolation of the contact in the insert. Both pins and sockets are machined from a copper alloy and are gold plated. This gold plating eliminates contact corrosion and offers an indefinite shelf life. Socket contacts for these series are closed entry design. jam nut receptacle Breakaway style plug is available in PT-SE crimp. The PT-SE, SP-SE and MS/PT-SE Series are intermateable and intermountable with all existing Miniature Cylindrical Series connectors. Refer to pages 4-10 for insert arrangement availability. * This connector style is sometimes referred to as a cable connecting "plug". It does, however, mate with either a straight or 90 degree plug. 26 PT-SE, SP-SE, MS/PT-SE Contact Specifications Contact Size Test Current Maximum Millivolt Drop Crimp Well Diameter Minimum Well Depth 20 7.5 55 .049.001 .267 16 13.0 49 .067.001 .236 12 23.0 42 .100.002 .236 "SE", MS / "E" open wire seal Service Rating Service Rating Recommended Operating AC Voltage at Sea Level Test Voltage AC (RMS), 60 cps Sea Level 50,000 ft. 70,000 ft. 110,000 ft. I 600 1,500 500 375 200 II 1,000 2,300 750 500 200 Silver plated wire per MIL-DTL-26482 PT-SE and SP-SE Service Classes PT-SE and SP-SE connectors are available in the three service classes listed below. "SE" (SR), MS / "F" strain relief clamp "SE" Open wire sealing - environmental resistant, with a nut and grommet for moisture proofing individual wires "SE (SR)" Strain relief clamp - environmental resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support "SP" Translucent nylon boot for retaining customer applied potting compounds; held in place by a threaded ring MS/PT-SE Service Classes MS-SE series connectors are available in the following certified service classes: "E" "F" "P" Open wire sealing - environmental resisting connectors are supplied with a multi-hole grommet and clamping nut for moisture proofing individual open wires Environmental resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support Potting applications - these connectors are supplied with a translucent nylon boot for retention of customer applied potting compound 27 "SP", MS / "P" potting boot PT00 SE (MS3120) SP00 SE wall mounting receptacle S R T Dia. 4 Holes (TP) R S (TP) TERMINATION ASSEMBLIES "SE" (SR), MS / "F" Strain Relief "SE" Open Wire Seal "SP" Potting Boot L N A K M PT00SE-XX-XXX SP00SE-XX-XXX MS3120E-XX-XXX PT00SE-XX-XXX (SR) SP00SE-XX-XXX (SR) MS3120F-XX-XXX PT00SP-XX-XXX SP00SP-XX-XXX To complete part number see how to order on page 36. (MMC) located within .005 of (TP) Receptacle Front View Shell Size R (TP) PT Receptacle Side View S Max. SP PT T Dia. .005 SP PT SP A Dia. +.001 -.005 K .016 M +.010 -.000 PT P* Panel Thickness SP PT SP 8 .594 - .828 - .120 - .473 .062 .431 - .094 - 10 .719 .812 .954 1.141 .120 .150 .590 .062 .431 .462 .094 .125 12 .812 .938 1.047 1.226 .120 .150 .750 .062 .431 .462 .094 .125 14 .906 1.031 1.141 1.360 .120 .150 .875 .062 .431 .462 .094 .125 16 .969 1.125 1.234 1.453 .120 .150 1.000 .062 .431 .462 .094 .125 18 1.062 1.203 1.328 1.532 .120 .150 1.125 .062 .431 .462 .094 .125 20 1.156 1.297 1.453 1.688 .120 .150 1.250 .094 .556 .556 .219 .219 22 1.250 1.375 1.578 1.766 .120 .150 1.375 .094 .556 .556 .219 .219 24 1.375 1.500 1.703 1.891 .147 .150 1.500 .094 .589 .589 .219 .219 Shell Size Class "SE", MS/"E" Class "SE"(SR), MS/"F" Class "SP", MS/"P" L Max. N Dia. Max G Dia. L Max. N Max. D Dia. Max. L Max. N Dia. Max. 8 1.328 .560 .125 2.422 .781 - - - 10 1.328 .704 .188 2.422 .844 .444 1.656 .734 12 1.328 .825 .312 2.422 .969 .558 1.656 .858 14 1.328 .954 .375 2.422 1.094 .683 1.656 .984 16 1.328 1.080 .500 2.537 1.156 .808 1.656 1.110 18 1.328 1.204 .625 2.537 1.406 .909 1.656 1.234 20 1.359 1.330 .625 2.824 1.406 1.034 1.750 1.360 22 1.359 1.454 .750 2.824 1.594 1.159 1.750 1.484 24 1.422 1.580 .800 2.900 1.688 1.284 1.782 1.610 * Back panel mounting All dimensions for reference only. 28 MF00 SE (MS3128) wall mounting receptacle T1 Dia. 4 Holes S R1 (TP) R (TP) R R1 (TP) (TP) S T Dia. 4 Holes "SE" Open Wire Seal MS / "F" Strain Relief TERMINATION ASSEMBLIES L N A M K MF00SE-XX-XXX (SR) MS3128F-XX-XXX MF00SE-XX-XXX MS3128E-XX-XXX Receptacle Front View Shell Size R R1 S Max. T Dia. .005 Receptacle Side View T1 Dia. .005 A Dia. +.001 -.000 K .016 M +.010 -.000 Class MS/ "E" L Max. N Max. Class MS/ "F" F Min. G Dia. L Max. N Max. 10 .719 .812 1.141 .120 .150 .590 .062 .462 1.328 .685 .297 .188 1.906 .891 12 .812 .938 1.266 .120 .150 .750 .062 .462 1.328 .813 .422 .312 1.906 1.016 14 .906 1.031 1.360 .120 .150 .875 .062 .462 1.328 .930 .547 .375 1.906 1.141 16 .969 1.125 1.453 .120 .150 1.000 .062 .462 1.328 1.057 .609 .500 2.000 1.203 18 1.062 1.203 1.532 .120 .150 1.125 .062 .462 1.28 1.175 .734 .625 2.000 1.469 20 1.156 1.297 1.688 .120 .150 1.250 .094 .556 1.359 1.301 .734 .625 2.172 1.469 22 1.250 1.375 1.766 .120 .150 1.375 .094 .556 1.359 1.428 .922 .750 2.172 1.656 24 1.375 1.500 1.891 .147 .150 1.500 .094 .589 1.422 1.533 .984 .800 2.234 1.750 All dimensions for reference only. 29 PT01 SE (MS3121) SP01 SE cable connecting receptacle S S TERMINATION ASSEMBLIES "SE" (SR), MS / "F" Strain Relief "SE" Open Wire Seal "SP", MS / "P" Potting Boot L L D N A N A K K PT01SE-XX-XXX SP01SE-XX-XXX MS3121E-XX-XXX K PT01SE-XX-XXX (SR) SP01SE-XX-XXX (SR) MS3121F-XX-XXX PT01SP-XX-XXX SP01SP-XX-XXX MS3121P-XX-XXX Note: This connector style is sometimes referred to as a cable connecting "plug". It does, however, mate with either a straight or 90 degree plug. To complete part number see how to order on page 36. Receptacle Front View Shell Size Receptacle Side View Class "SE", MS/ "E" Class "SE" (SR), MS/"F" Class "SP", MS/"P" S Max. A Dia. +.001 -.005 K .018 L Max. N Dia. Max. G Dia. L Max. N Max. D Dia. L Max. N Dia. Max. .832 .473 .094 1.522 .560 .125 2.422 .828 - - - 10 .975 .590 .094 1.522 .685 .188 2.422 .891 .444 1.656 .734 12 1.068 .750 .094 1.522 .813 .312 2.422 1.016 .558 1.656 .858 14 1.162 .875 .094 1.522 .930 .375 2.422 1.141 .683 1.656 .984 16 1.256 1.000 .094 1.522 1.057 .500 2.537 1.203 .808 1.656 1.110 18 1.349 1.125 .094 1.522 1.175 .625 2.537 1.469 .909 1.656 1.234 20 1.475 1.250 .115 1.709 1.301 .625 2.824 1.469 1.034 1.750 1.360 22 1.599 1.375 .115 1.709 1.428 .750 2.824 1.656 1.159 1.750 1.484 24 1.729 1.500 .115 1.709 1.555 .800 2.900 1.750 1.284 1.782 1.610 8 All dimensions for reference only. 30 PT02 SE (MS3122) SP02 SE box mounting receptacle S L R M (TP) R S (TP) K A N T Dia. 4 Holes D PT02SE-XX-XXX SP02SE-XX-XXX MS3122E-XX-XXX To complete part number see how to order on page 36. (MMC) located within .0025 of (TP) Receptacle Front View Shell Size Receptacle Side View T Dia. .005 S Max. R PT SP PT SP PT SP A Dia. +.001 -.005 D Max. PT K .025 M +.010 -.000 L Max. SP PT SP N Dia. +.011 -.000 8 .594 - .828 - .120 - .473 .312 - .062 1.358 .431 - .438 10 .719 .812 .954 1.141 .120 .150 .590 .312 .219 .062 1.296 .431 .462 .562 12 .812 .938 1.047 1.266 .120 .150 .750 .312 .219 .062 1.296 .431 .462 .688 14 .906 1.031 1.141 1.360 .120 .150 .875 .312 .219 .062 1.296 .431 .462 .812 16 .969 1.125 1.234 1.453 .120 .150 1.000 .312 .219 .062 1.296 .431 .462 .938 18 1.062 1.203 1.328 1.532 .120 .150 1.125 .312 .219 .062 1.296 .431 .462 1.062 20 1.156 1.297 1.453 1.688 .120 .150 1.250 .406 .344 .094 1.358 .556 .556 1.188 22 1.250 1.375 1.578 1.766 .120 .150 1.375 .406 .344 .094 1.358 .556 .556 1.312 24 1.375 1.500 1.703 1.891 .147 .150 1.500 .406 .344 .094 1.358 .589 .589 1.438 All dimensions for reference only. 31 MF02 SE (MS3127) box mounting receptacle T1 Dia. 4 Holes S R1 L (TP) M R (TP) R R1 (TP) (TP) S K A T Dia. 4 Holes N D MF02SE-XX-XXX MS3127E-XX-XXX To complete part number see how to order on page 36. (MMC) located within .0025 of (TP) Receptacle Front View Receptacle Side View Shell Size N Dia. +.011 -.000 R R1 S Max. T .005 T1 .005 A Dia. +.001 -.005 D Max. K .016 L Max. M +.010 -.000 10 .562 .719 .812 1.141 .120 .150 .590 .219 .062 1.266 .462 12 .688 .812 .938 1.266 .120 .150 .750 .219 .062 1.266 .462 14 .812 .906 1.031 1.360 .120 .150 .875 .219 .062 1.266 .462 16 .938 .969 1.125 1.453 .120 .150 1.000 .219 .062 1.266 .462 18 1.062 1.062 1.203 1.532 .120 .150 1.125 .219 .062 1.266 .462 20 1.188 1.156 1.297 1.688 .120 .150 1.250 .344 .094 1.328 .556 22 1.312 1.250 1.375 1.766 .120 .150 1.375 .344 .094 1.328 .556 24 1.438 1.375 1.500 1.891 .147 .150 1.500 .344 .094 1.328 .589 All dimensions for reference only. 32 PT06 SE (MS3126) SP06 SE straight plug S TERMINATION ASSEMBLIES "SE" (SR), MS / "F" Strain Relief "SE", MS / "E" Open Wire Seal L "SP", MS / "P" Potting Boot L L N G N Z pin contacts Z1 socket contacts D N Z pin contacts Z1 socket contacts PT06SE-XX-XXX SP06SE-XX-XXX PTG06SE-XX-XXX MS3126E-XX-XXX Z pin contacts Z1 socket contacts PT06SE-XX-XXX (SR) SP06SE-XX-XXX (SR) PTG06SE-XX-XXX (SR) MS3126F-XX-XXX PT06SP-XX-XXX SP06SP-XX-XXX PTG06SP-XX-XXX MS3126P-XX-XXX To complete part number see how to order on page 36. Plug Front View Shell Size Plug Side View S Dia. Max. Z .045 Z1 .045 Class "SE", MS/"E" Class "SE" (SR), MS/"F" L Max. N Max. G Dia. Class "SP", MS/"P" L Max. N Max. D Dia. L Max. N Dia. Max. 8* .734 .640 .579 1.328 .540 .125 2.413 .828 .327 1.750 .578 10 .859 .640 .579 1.328 .685 .188 2.413 .891 .444 1.750 .734 12 1.031 .640 .579 1.328 .813 .312 2.413 1.016 .558 1.750 .858 14 1.156 .640 .579 1.328 .930 .375 2.413 1.141 .683 1.750 .984 16 1.281 .640 .579 1.328 1.057 .500 2.528 1.203 .808 1.750 1.110 18 1.391 .640 .579 1.328 1.175 .625 2.528 1.469 .909 1.750 1.234 20 1.531 .640 .579 1.297 1.301 .625 2.753 1.469 1.034 1.750 1.360 22 1.656 .640 .579 1.297 1.428 .750 2.753 1.656 1.159 1.750 1.484 24 1.777 .640 * PT-SE, MS-SE and MS-SP only. All dimensions for reference only. .579 1.359 1.533 .800 2.830 1.750 1.284 1.766 1.610 33 PT07 SE (MS3124) SP07 SE S H jam nut receptacle S TERMINATION ASSEMBLIES "SE" (SR), MS / "F" Strain Relief "SE", MS / "E" Open Wire Seal L "SP", MS / "P" Potting Boot L L M M M K R K K N J A F N J A G N J A R P P PT07SE-XX-XXX SP07SE-XX-XXX MS3124E-XX-XXX R P PT07SE-XX-XXX (SR) SP07SE-XX-XXX (SR) MS3124F-XX-XXX PT07SP-XX-XXX SP07SP-XX-XXX MS3124P-XX-XXX To complete part number see how to order on page 36. All lockwire holes are .044 Dia. Min. Receptacle Front View Shell Size H Hex Max. S Max. Receptacle Side View A Dia. +.001 -.005 J Flat +.000 -.010 K +.011 -.010 M .005 P Panel Thickness Min. R Thread Class 2A Max. 8 .767 .954 .473 .530 .125 .696 .062 .125 .5625-24 UNEF 10 .892 1.078 .590 .655 .125 .696 .062 .125 .6875-24 NEF 12 1.079 1.266 .750 .818 .125 .696 .062 .125 .8750-20 UNEF 14 1.205 1.391 .875 .942 .125 .696 .062 .125 1.0000-20 UNEF 16 1.329 1.516 1.000 1.066 .125 .696 .062 .125 1.1250-18 NEF 18 1.455 1.641 1.125 1.191 .125 .696 .062 .125 1.2500-18 NEF 20 1.579 1.828 1.250 1.316 .156 .884 .062 .250 1.3750-18 NEF 22 1.705 1.954 1.375 1.441 .156 .884 .062 .250 1.5000-18 NEF 24 1.829 2.078 1.500 1.556 .156 .917 .062 .250 1.6250-18 NEF Class "SE", MS/"E" Class "SE" (SR), MS/"F" Class "SP", MS/"P" Shell Size L Max. N Max. F Min. G Dia. Free L Max. N Max. G Dia. L Max. N Dia. Max. 8 1.438 .749 .234 .125 1.922 .828 - - - 10 1.438 .874 .297 .188 1.922 .891 .444 1.656 .734 12 1.438 .999 .422 .312 1.922 1.016 .558 1.656 .858 14 1.438 1.124 .547 .375 1.922 1.141 .683 1.656 .984 16 1.438 1.249 .609 .500 2.000 1.203 .808 1.656 1.110 18 1.438 1.374 .734 .625 2.000 1.469 .909 1.656 1.234 20 1.625 1.530 .734 .625 2.172 1.469 1.034 1.922 1.360 22 1.625 1.655 .922 .750 2.172 1.656 1.159 1.922 1.484 24 1.688 1.780 .984 .800 2..234 1.750 1.284 1.951 1.610 All dimensions for reference only. 34 PT08 SE SP08 SE 90 degree plug G "SE" Open Wire Seal, "SE" (SR) Strain Relief TERMINATION ASSEMBLIES "SP" Potting Boot 75 degrees L L E A B PT08SE-XX-XXX SP08SE-XX-XXX PT08SE-XX-XXX (SR) SP08SE-XX-XXX (SR) H PT08SP-XX-XXX SP08SP-XX-XXX D K C To complete part number see how to order on page 36. All lockwire holes are .044 Dia. Min. Plug Front View Plug Side View Shell Size G Dia. Max. B .031 C +.010 -.025 D .062 E +.047 -.025 L Max. A .025 H .015 K .015 L Max. 10 .921 .749 .170 1.191 .393 2.137 .547 .438 .562 2.031 12 1.046 .812 .264 1.191 .450 2.222 .625 .516 .688 2.093 14 1.171 .905 .310 1.254 .519 2.370 .734 .625 .781 2.203 16 1.297 1.030 .330 1.316 .583 2.572 .750 .656 .890 2.250 18 1.422 1.015 .444 1.562 .621 2.680 .781 .703 1.000 2.296 20 1.562 1.077 .510 1.625 .683 2.753 .859 .766 1.125 2.343 22 1.672 1.139 .515 1.719 .739 2.799 .906 .812 1.234 2.390 24 1.797 1.250 .656 1.750 .787 3.037 1.181 .918 1.374 2.624 All dimensions for reference only. 35 PT-SE, SP-SE, MS/PT-SE how to order PT-SE, SP-SE Ex: PT00SE-20-41PW003 1. 2. 3. 4. 5. 6. 7. 8. Contact Configuration Insert Rotation Finish P W 003 Connector Type Shell Style Service Class Shell Size Insert Arrangement PT 00 SE 20 41 1. Connector Type PT standard olive drab, electrically conductive cadmium plate bayonet lock connector with solder contacts MF standard olive drab, electrically conductive cadmium plated, bayonet lock connector with dual mounting holes, and crimp contacts SP electrically non-conductive, hard anodic coated bayonet lock connector with solder contacts and larger flange and mounting holes for back panel mounting 3. Service Class 7. Insert Rotation SE Environmental crimp No letter is required for normal position SP potted type crimp W Both of the above are Amphenol proprietary versions of the MILDTL-26482, Series 1 crimp contact connector and offer 15 lbs. contact retention for size 20 contacts; 25 lbs. for size 16 contacts. 2. Shell Style Z PG SQ Braided shield termination 8. Finish Heatshrink termination SR G Wall mounting receptacle 01 Cable connecting receptacle 4. Shell Size 02 Box mounting receptacle Shell sizes 8 - 24 available 06 Straight plug 07 Jam nut receptacle 5. Insert Arrangement 08 90 degree plug Refer to pages 4-10 for insert availability (Use only the number following the hyphen) Designates a strain relief clamp Indicate optional finishes as follows: 100 P Pin contacts S Socket contacts Suffix added for flat eyelet pin contacts in hermetic versions OR 6. Contact Configuration 005 * Anodic coating - Alumilite(R) (standard on "SP") 023 * Electroless nickel 025 Black zinc cobalt plating 072 * Conductive gray zinc nickel plating 424 * Electroless nickel finish with strain relief 470 Black zinc cobalt plating with strain relief 725 Gray zinc nickel plating with strain relief * RoHS Compliant finish MS/PT-SE MIL-DTL-26482, Series 1 Ex: MS3120E20-41PW Note: Olive drab cadmium is the default plating. If required on SP type use suffix (003). 1. 2. Connector Type Specification Number Shell Style Service Class MS 311 0 E 3. 1. Connector Type Military standard 2. Specification Number 312 Refer to page 6 Y adapter for cable gland for moisture proofing jacketed cables 00 MS X basic family for MIL-DTL-26482, Series 1 crimp type 3. Shell Style 0 Wall mounting receptacle 1 Cable connecting receptacle* 2 Box mounting receptacle 4 Jam nut receptacle 6 Straight plug 7 box mounting receptacle with dual mounting holes 8 wall mounting receptacle with dual mounting holes 4. 5. 6. 7. 8. Shell Size Insert Arrangement Contact Configuration Insert Rotation 20 41 P W 4. Service Class 7. Contact Configuration E Environmental resisting connector P Pin contacts F Environmental resisting connectors with strain relief S Socket contacts P Potted type with potting boot SQ G Braided shield termination 8. Insert Rotation Heatshrink termination No letter is required for normal position W X 5. Shell Size Y Shell sizes 8 - 24 available 6. Insert Arrangement Refer to pages 4-10 for insert availability (Use only the number following the hyphen) 36 Refer to page 6 Z * This connector style is sometimes referred to as a cable connecting "plug". It does, however, mate with either a straight or 90 degree plug. PT & SP accessories - sealing plugs, flange gaskets, potting boots SEALING PLUGS- FOR PT & SP C B DIA .135 +.030 -.025 A DIA Contact Size Amphenol(R) Part Number MS Number A Dia. .010 B Dia. .005 C .010 Color Code 12 10-405996-12 MS27488-12 .121 .171 .564 Yellow 16 10-405996-16 MS27488-16 .083 .133 .564 Blue 20 10-405996-16 MS27488-20 .060 .090 .564 Red How to Order: Order by 10- (Proprietary) or MS part number as shown in chart above. SEALING PLUG MS27488-XX 10-405996-XX MOUNTING FLANGE GASKETS - FOR PT & SP PT 10-101949 .130 DIA SIZE 6 TO 22 .156 DIA SIZE 24 .160 DIA 10-150949 Shell Size T MOUNTING FLANGE GASKET 10-101949-XX 10-150949-XX PT & SP 10-101949 10-150949 SP 10-150949 R .010 S .010 R .010 S .010 F +.016 -.000 T .008 6 .469 .688 .641 .953 .375 .024 8 .594 .812 .734 1.047 .500 .024 10 .719 .938 .812 1.125 .625 .024 12 .813 1.031 .938 1.250 .750 .024 14 .906 1.125 1.031 1.344 .875 .024 16 .969 1.219 1.125 1.438 1.000 .024 18 1.063 1.312 1.203 1.516 1.125 .024 20 1.156 1.438 1.297 1.672 1.250 .024 22 1.250 1.563 1.375 1.750 1.375 .024 24 1.375 1.688 1.500 1.875 1.500 .024 How to Order: For PT: 10-101949-XX (complete order number with desired shell size). For SP: 10-150949-XX (complete order number with desired shell size). 75 POTTING BOOTS - FOR PT & SP B E 15 REF D L 75 POTTING BOOT 10-101988-XX Shell Size B Max. D .015 E .015 L Max. 8 .433 .312 .438 .766 10 .493 .438 .562 .830 12 .552 .516 .688 .861 14 .643 .625 .781 .916 16 .658 .656 .890 .936 18 .689 .703 1.000 .959 20 .750 .766 1.125 1.052 22 .794 .812 1.234 1.073 24 1.070 .918 1.374 1.310 How to Order: 10-101988-XX (complete order number with desired shell size). All dimensions for reference only 37 PT & SP CLASS "E" STRAIN RELIEF CLAMP - FOR PT & SP accessories - clamps L B D G Shell Size B Max. C Thread Class 2B D Min. G Max. L Max. 8 .550 6-32 NC .240 .812 .930 10 .675 6-32 NC .302 .875 .930 12 .803 6-32 NC .428 1.000 .930 14 .920 6-32 NC .552 1.125 .930 16 1.047 6-32 NC .615 1.188 1.062 18 1.165 8-32 NC .740 1.438 1.062 20 1.291 8-32 NC .740 1.438 1.093 22 1.418 8-32 NC .928 1.719 1.093 24 1.533 8-32 NC .928 1.719 1.093 How to Order: C 10-101971-XX X Add desired Add desired finish suffix shell size "3" designates olive drab cadmium "5' designates Alumilite(R) Not for use with jam nut style connectors CLASS "E" STRAIN RELIEF CLAMP 10-101971-XX CLASSES "A" & "P" STRAIN RELIEF CLAMP - FOR PT & SP L B D G Shell Size B Max. C Thread Class 2B D Min. G Max. L +.010 -.020 8 .540 6-32 NC .240 .812 .843 10 .665 6-32 NC .302 .875 .843 12 .793 6-32 NC .428 1.000 .843 14 .910 6-32 NC .552 1.125 .843 16 1.037 6-32 NC .614 1.188 .975 18 1.155 8-32 NC .740 1.438 .975 20 1.281 8-32 NC .740 1.438 1.007 22 1.408 8-32 NC .928 1.719 1.007 24 1.533 8-32 NC .938 1.719 1.007 How to Order: C 10-101980-XX X Add desired Add desired finish suffix shell size "3" designates olive drab cadmium "5' designates Alumilite(R) Not for use with jam nut style connectors CLASSES "A" & "P" STRAIN RELIEF CLAMP 10-101980-XX CLASS "A" CABLE CLAMPS - FOR PT & SP V Thread B Shell Size Amphenol(R) Part Number A .031 B Max. C Dia. Min. V Thread 10 97-3057-1004 .795 .842 .3125 .6250-24 12 97-3057-1007 .850 .995 .4375 .7500-20 14 97-3057-1008 .920 1.120 .5625 .8750-20 16 97-3057-1010 .920 1.216 .6250 1.0000-20 18/20 97-3057-1012 .927 1.403 .7500 1.1875-18 22/24 97-3057-1016 1.015 1.683 .9375 1.4375-18 How to Order: Order by 97-3057-XXXX number listed above. Standard finish is drab zinc alloy. Consult Amphenol, Sidney, NY for alternate finishes. olive Standard accessory finishes are "3" olive drab cadmium for PT and MS/PT types, "5" Alumilite(R) for SP types. Electroless nickel plating is also available on some items; consult Amphenol, Sidney, NY C A All dimensions for reference only. CLASS "A" CABLE CLAMP 97-3057-XXXX 38 PT, SP, MS/PT accessories - protection caps RECEPTACLE PROTECTION CAPS - FOR PT, SP, MS/PT PLUG PROTECTION CAPS - FOR PT, SP, MS/PT C B .140 +.010 -.005 DIA FOR SIZE 24 L L +.010 G .140 X X RECEPTACLE PROTECTION CAP FOR PT, SP, MS/PT CONNECTORS 10-101960-XXX MS3181-XXX (Wall Receptacle) .125 +.010 -.005 DIA FOR SIZE 6-22 N 10-101961-XXX (Cable Connecting Receptacle) PLUG PROTECTION CAP FOR PT, SP, MS/PT CONNECTORS 10-101964-XXX MS3181-XXX (Jam Nut Recptacle) MS3180-XXX 10-101957-XXX Shell Size B Dia. +.010 -.000 C Dia. +.010 -.000 G Dia. Max. L +.020 -.000 X Std. & MS RA, CA, NA X MS only RAL/CAL/NAL Shell Size N Dia. +.001 -.005 L Dia. +.025 -.015 X Std. & MS CA, RA X MS only CAL/ RAL 6 .328 .454 .577 .563 3.000 5.000 6 .348 .532 3.000 5.000 8 .454 .578 .706 .563 3.000 5.000 8 .473 .532 3.000 5.000 5.000 10 .590 .532 3.000 5.000 .750 .532 3.500 5.000 10 .578 .703 .816 .563 3.000 12 .703 .891 1.000 .563 3.500 5.000 12 14 .844 1.016 1.128 .563 3.500 5.000 14 .875 .532 3.500 5.000 16 .969 1.141 1.257 .563 3.500 5.000 16 1.000 .532 3.500 5.000 5.000 18 1.125 .532 3.500 5.000 1.250 .594 4.000 5.000 18 1.094 1.266 1.367 .563 3.500 20 1.219 1.391 1.496 .563 4.000 5.000 20 22 1.343 1.516 1.624 .563 4.000 5.000 22 1.375 .594 4.000 5.000 24 1.453 1.614 1.747 .603 4.000 5.000 24 1.500 .627 4.000 5.000 How to Order Proprietary Receptacle Caps: Wall Receptacle Caps: 10-101960- XX X Cable Connecting Receptacle Caps: 10-101961- XX X Jam Nut Receptacle Caps: 10-101964- XX X Add desired shell size Add desired finish suffix "FL" designates gray zinc nickel "3" designates olive drab cadmium "5" designates Alumilite(R) Proprietary caps are supplied with standard bead chains only (as shown in drawing at left). For other chain options, an MS version cap should be ordered. How to Order MS Version Receptacle Caps: Wall Receptacle Caps: MS3181- XX -CA for sash chain -CAL for long sash chain -RA for rope chain -RAL for long rope chain Jam Nut Recept. Caps: MS3181- XX -NA for sash chain -NAL for long sash chain Shell size MS versions are supplied with standard anodize finish only. For other finish options a proprietary cap should be ordered. 39 How to Order Proprietary Plug Caps: 10-101957-XX X Add desired shell size Add desired finish suffix "FL" designates gray zinc nickel "3" designates olive drab cadmium "5" designates Alumilite(R) Proprietary caps are supplied with standard bead chains only (as shown in drawing at left). For other chain options an MS version cap should be ordered. How to Order MS Version Plug Caps: MS3180- XX -CA for sash chain -CAL for long sash chain -RA for rope chain Shell Size -RAL for long rope chain PT & SP accessories - dummy receptacles, "O" rings, plastic dust caps DUMMY RECEPTACLES - FOR PT, SP, MS/PT S .150 DIA. +.004 -.002 4 HOLES R M Shell Size K .010 M +.030 -.000 N +.001 -.005 8 .062 .462 10 .062 12 Proprietary Version MS Version R .005 S .010 R1 (TP) S1 (TP) .473 .734 1.047 .594 .828 .462 .590 .812 1.125 .719 .954 .062 .462 .750 .938 1.250 .812 1.047 14 .062 .462 .875 1.031 1.344 .906 1.141 DUMMY RECEPTACLE FOR PT, SP, MS/PT CONNECTORS 16 .062 .462 1.000 1.125 1.438 .969 1.234 18 .062 .462 1.125 1.203 1.516 1.062 1.328 MS3115-XXX 10-150921-XXX 20 .062 .556 1.250 1.297 1.672 1.156 1.453 22 .062 .556 1.375 1.375 1.750 1.250 1.578 24 .062 .589 1.500 1.500 1.875 1.375 1.703 R S K N How to Order Proprietary Dummy Receptacles: Add desired shell size Add desired finish suffix "FL" designates gray zinc nickel "3" designates olive drab cadmium "5" designates Alumilite(R) How to Order MS Version Dummy Receptacles: Add desired shell size Add desired finish suffix -A designates Alumilite(R) -L designates electroless nickel -W designates olive drab cadmium 10-150921-XX X MS3115-XX X PLASTIC DUST CAPS - FOR PT, SP Shell Size Plug Plastic Dust Cap Receptacle Plastic Dust Cap 6 10-70500-8 10-70506-8S 8 10-70506-12 10-70506-10 10 10-70500-12 10-70506-12 12 10-70506-16 10-70506-14 14 10-70506-18 10-70506-16 16 10-70506-20 10-70506-18 18 10-70506-22 10-70506-20 20 10-70506-24 10-79506-22 22 10-70524-1 10-70506-24 24 10-70506-28 10-70524-1 How to Order Plastic Dust Caps: To the basic order number add the dust cap size to match connector plug or receptacle shell size, as shown in the tables above. Example: 10-70506-12 would be the correct order number for a plastic dust cap for a PT00 receptacle, shell size 10. All dimensions for reference only. 40 PT accessories glands Nylon Cable Glands Metal Cable Glands Material: Nylon 66 (UL Approved 94V-2) Seal ring: UL 94V-2 (UL Approved 94V-2) Thread Type: Metric; PG, NPT Temp Range: Static: -40 to +100C Dynamic:-20 to +80C Short Term: +120 Current Colors: Gray, Black Material: Clamping: Seal Ring: Brass with Nickel; Brass with Tin/Nickel UL approved PA6, 94V-0 UL 94V-2 (UL approved NBR, 94V-2;UL approved DOW CORNING RUBBER, 94V-0 Thread Type: Metric, PG, NPT Protective: IP68 (tighten with o-ring) Temp Range: -40 to +100C Torque Value (N-M) of hex and cap nuts: 3.0-4.5 N-M M12, M16, M20 are UL recognized under file #E339605 AIGO Part Thread "A" M "d" (mm) Cable Range (mm) Thread "L" (mm) Clamp "H" (mm) Spanner "S" (mm) AIGO Part Thread "A" M "d" (mm) Cable Range (mm) Thread "L" (mm) Clamp "H" (mm) Spanner "S" (mm) AIO-CSM12 M12 x1.5 8 3-6.5 8 20 15 AIO-CSJM12 M12x1.5 6.5 3-6.5 6.2 15 14 19 AIO-CSJM14 M14x1.5 8 4-8 5 19 15 AIO-CSJM16 M16x1.5 9 6-9 6.3 20 18 AIO-CSJM18 M18x1.5 10 5-10 7 20 22 AIO-CSJM20 M20x1.5 12 6-12 8.3 20 22 AIO-CSM16 M16 x 1.5 8 4-8 8 22 AIO-CSM18 M18 x 1.5 10 5-10 9 25 22 AIO-CSM18 M20 x 1.5 12 6-12 9 30 24 AIO-CSM20 M22 x 1.5 14 10-14 10 30 27 AIO-CSJM22 M22x1.5 14 10-14 8 24 24 AIO-CSM22 M24 x 1.5 14 10-14 10 30 27 AIO-CSJM24 M24x1.5 14 10-14 8 24 27 AIO-CSM24 M25 x 1.5 18 13-18 10 30 33 AIO-CSJM25 M25x1.5 18 13-18 7.8 23 30 AIO-CSM25 M30 x 2.0 18 13-18 11 33 33 AIO-CSJM27 M27x1.5 18 13-18 8 26 30 AIO-CSJM30 M30x2.0 18 13-18 8 26 32 AIO-CSJM32 M32x1.5 25 18-25 10 27 40 AIO-CSJM36 M36x2.0 25 18-25 10 34 40 AIO-CSM30 M32 x 1.5 25 18-25 11 38 42 AIO-CSM32 M33 x 2.0 25 18-25 11 39 42 AIO-CSM33 M40 x 1.5 32 22-32 13 48 54 AIO-CSJM40 M40x1.5 32 22-32 10 39 50 AIO-CSM40 M50 x 1.5 38 32-38 14 50 60 AIO-CSJM50 M50x1.5 38 32-38 11 39 60 AIO-CSM50 M72 x 2.0 57 51-57 16 75 80 AIO-CSJM63 M63x1.5 44 37-44 12 43 67 AIO-CSM72 NPT1/2" 12 6-12 13.6 28 24 AIO-CSJM72 M72x1.5 52 46-52 16 47 75 AIO-CSJM80 M80x2.0 60 52-60 20 57 90 AIO-CSIN1/2 NPT 3/4" 18 13-18 14.1 32 33 AIO-CSJM90 M90x2.0 70 62-70 20 57 100 AIO-CSIN3/4 NPT 1"1/2" 32 22-32 17.3 50 54 AIO-CSJIN1/2 NPT 1/2" 12 6-12 13.6 25 24 AIO-CSJIN3/4 NPT 3/4" 18 13-18 14.1 26 30 AIO-CSJIN5/4 NPT 1"1/4" 32 22-32 17.3 41 50 AIO-CSJIN3/2 NPT 1"1/2" 32 22-32 17.3 46 50 65 AIO-CSIN3/2 G 1/2" 12 6-12 9 26 24 AIO-CSGIN3/4 G 3/4" 18 13-18 11 27 33 AIO-CSGIN1 G1" 25 18-25 11 33 42 AIO-CSJIN2 NPT2" 44 37-44 17.7 46 AIO-CSGIN5/4 G1"1/4 28 21-28 13 48 54 AIO-CSJIN5/2 NPT2 1/2" 52 46-52 23.7 58 80 AIO-CSGIN3/2 G1"1/2" 32 22-32 13 48 54 AIO-CSJIN3 NPT3" 70 62-70 26 58 100 AIO-CSGIN5/2 G2"1/2" 57 51-57 14 75 80 AIO-CSJGIN1/2 G1/2" 12 6-12 8 24 24 AIO-CSJGIN3/4 G3/4" 18 13-18 8 27 30 AIO-CSPG7 PG7 6.5 3-6.5 8 20 15 AIO-CSJGIN1 G1" 25 18-25 10 34 40 AIO-CSPG9 PG9 8 4-8 8 22 19 AIO-CSJGIN5/4 G1"1/4" 32 22-32 10 39 50 AIO-CSPG11 PG11 10 5-10 8 24 22 AIO-CSJGIN3/2 G1"1/2" 32 22-32 10 39 50 AIO-CSPG13.5 PG13.5 12 6-12 9 26 24 AIO-CSJGIN2 G2" 44 37-44 12 44 65 AIO-CSPG16 PG16 14 10-14 10 28 27 AIO-CSJGIN 5/2 G2 1/2" 52 46-52 16 47 82 AIO-CSJPG7 PG7 6.5 3-6.5 6 18 14 AIO-CSPG21 PG21 18 13-18 11 33 33 AIO-CSJPG9 PG9 8 4-8 7 21 18 AIO-CSPG29 PG29 25 18-25 11 38 42 AIO-CSJPG11 PG11 10 5-10 7 20 22 AIO-CSPG36 PG36 32 22-32 13 48 54 AIO-CSJPG13.5 PG13.5 12 6-12 8 24 22 AIO-CSPG42 PG42 38 32-38 14 52 60 AIO-CSJPG16 PG16 14 10-14 8 25 24 AIO-CSJPG21 PG21 18 13-18 8 26 30 AIO-CSJPG36 PG36 32 22-32 10 38 50 AIO-CSJPG42 PG42 38 32-38 11 42 60 AIO-CSJPG48 PG48 44 37-44 12 44 65 For additional information on other products available refer to our Cord grips & Cable Glands, Catalog 12-055 41 Application Tools "SE" The following data includes information pertaining to the application tools for crimping, inserting and removing size 20, 16, and 12 contacts incorporated in Amphenol(R) Miniature Cylindrical Connectors. All crimping tools included are the "full cycling" type, and when used as specified by the manufacturer, provide reliable crimped wire to contact termination. Tool frames and turret heads are available from approved tool manufacturers; consult Amphenol, Sidney, NY for listings. Assembly instructions are available online at www.amphenol-industrial.com See the following: L-786 for SE assembly instructions L-555 for solder type instructions CRIMPING TOOLS FOR PT-SE, SP-SE, MS/PT-SE (MIL-DTL-26482, Series 1) Connectors MS Tool Part Number Contact Size Tool From Turret Head 20 M22520/1-01 M22520/1-02 16 M22520/1-01 M22520/1-02 12 M22520/1-01 M22520/1-02 INSERTION/REMOVAL TOOLS FOR PT-SE, SP-SE, MS/PT-SE (MIL-DTL-26482, Series 1) Connectors Insertion Tool Contact Size Removal Tool Amphenol(R) Contact Insertion Pliers Amphenol(R) Contact Insertion Tool MS Part Number Contact Insertion Tool Amphenol(R) Contact Removal Tool MS Part Number Contact Removal Tool 20 11-8107-20 11-7401-20 M81969/17-03 11-7880-20 M81969/19-07 16 11-8107-16 11-7401-16 M81969/17-04 11-7880-16 M81969/19-08 12 - - M81969/17-05 - M81969/19-09 42 Contacts - Power and Thermocouple Crimp for miniature cylindrical connectors The following tables provide part number information for crimp contacts used in Amphenol(R) Miniature Cylindrical Connectors. For additional information, consult Amphenol, Sidney, NY. CRIMP CONTACTS for MIL-DTL-26482, Series 1 (PT-SE, SP-SE) Connectors Pins Contact Size Accommodates Wire Size Sockets MS Number Amphenol(R) Proprietary Number MS Number Amphenol(R) Proprietary Number 20 20, 22 & 24 AWG M39029/31-240 10-683787-20P M39029/32-259 10-731210-3D1 16 16, 18 & 20 AWG M39029/31-228 10-683788-16P M39029/32-247 10-679379-16D 12 12 & 14 AWG M39029/31-235 10-807100-125 M39029/32-254 10-807103-125 20-16 16 AWG 10-330930-20F 10-807155-205 16-20 20 AWG 10-330932-16F 10-330933-16F 12-10 12 AWG 10-330938-12F 10-330939-12F THERMOCOUPLE CONTACTS for Miniature Connectors Size Material Pins Proprietary Part Number Sockets Proprietary Part Number SE SE Chromel 10-330940-21P 10-330940-21S Alumel 10-330940-22P 10-330940-22S Chromel 10-330940-1P 10-330940-1S Alumel 10-330940-2P 10-330940-2S Iron 10-330940-3P 10-330940-3S Constantan 10-330940-4P 10-330940-4S 16 Crimp Termination 20 Crimp Termination See L-776 for thermocouple contact termination instructions. These are online at www.amphenol-industrial.com For PCB contacts for miniature connectors, see page 20. 43 Coaxial Contacts for miniature cylindrical connectors Amphenol(R) Miniature Connectors can incorporate shielded coax contacts. The Miniature family is built around MIL-DTL-26482 specifications, with Mil-approved and proprietary styles offered. Normal operating voltage for Miniature cylindricals with power only contacts is up to 1,000 VAC (RMS) at sea level. Table 1: Miniature Cylindricals offer these features for contact termination flexibility: * Several insert arrangements that can incorporate: * Size 8 & 12 Crimp Coax contacts for Crimp type * Size 8 & 12 Solder Coax contacts for Solder type * Wide selection of connector shell styles and sizes * Standard power contact options within the various connector styles include: solder type, crimp front release, crimp rear release * Coax contacts are designed to the same high performance standards as power contacts. Coax and power contacts may be intermixed with no degradation of connector reliability. * No mis-mating or cross-plugging with insert rotation and keyway polarization. Table 2: GENERAL ORDERING INFORMATION Amphenol Miniature Cylindricals are normally supplied with a full complement of power contacts, separately packaged. Coax contacts are ordered by part number as referenced in the part number charts on the following pages of this catalog, and are substituted for the power contacts at the time of the cable or equipment assembly. If the application is for coax only, the connector may be ordered less contacts and no power contacts will be supplied. Installation instructions for the coax contacts for Miniature Connectors are provided in Amphenol documents as follows: L-633 for solder type; L-613 for SE type. HOW TO ORDER: A. Select the coax contacts designed for the cable being used from the applicable charts in this catalog for each Miniature type (solder, SE). B. Select a connector insert from those shown on pages 4-5 which will accommodate the quantity and size of coaxial contacts needed plus any power contacts required. Note: Size 8S and 12S contacts are used with connector inserts through shell size 18 only. For larger connector shell sizes, use size 8L contacts. C. Determine the Miniature Cylindrical type, shell style, finish, service class and insert rotation required for your application. D. Consult Amphenol, Sidney NY with the pertinent cable, contact, insert arrangement and connector style choices for complete connector part number. 44 Solder Coax Contact for use in Miniature Solder Type Connectors Pin Crimp Coax Contact for use in Miniature Crimp SE Type Connectors Socket Crimp Coax Contact for use in Miniature Crimp SE Type Connectors Coaxial Contacts for miniature cylindrical connectors, cont. Amphenol(R) Coaxial Contacts designed for use in Miniature Cylindrical Connectors offer the same durability advantages and design benefits for reliable interconnection as the Amphenol coax contacts used in high performance D38999 connectors. A variety of military and commercial shielded cables are accommodated within the miniature cylindrical series. Amphenol supplies coax contacts for solder and crimp SE connector styles. TYPICAL MINIATURE CRIMP COAX SOCKET CONTACT has crimp socket outer contact with a solder pin inner contact Other features of the coax for miniature cylindricals include: * * * * Miniature coax design has an outside nut within the assembly for fast, reliable assembly of contact to cable. All types feature solder style inner contacts and crimp style outer contacts for reliable cable termination Miniature coax crimp type contacts are designed for use in Miniature crimp series connectors Miniature coax solder type contacts are designed for use in Miniature solder series connectors. These come pre-installed into the solder connector. TYPICAL MINIATURE CRIMP COAX PIN CONTACT has crimp pin outer contact with a solder socket inner contact TYPICAL ELECTRICAL PERFORMANCE Size 8 and 12 Coax Contacts Contact Resistance: Center @ 1 Amp, 170 millivolts max. voltage drop @ 25C Outer @ 12 Amps, 150 millivolts max. voltage drop @ 25C Dielectric Withstanding Voltage: Size 8: 1,300 VAC Rms @ sea level Size 12: 1,000 VAC Rms @ sea level Size 8 & 12: 250 VAC Rms @ 50,000 ft. Insulation Resistance 5,000 megohms minimum @ 25C Typical VSWR for size 8 & 12 PT-SE Types II & III only: 1.2 + .12F (GHz) up to 10 GHz EXPLANATION OF TYPE CLASSIFICATIONS: PT-SE Type I is moisture seal design with internal O-ring. PT-SE Type II is 50 ohm impedance matched version. Contacts terminated to other than 50 ohm cables are therefore not matched. PT-SE Type III is 50 ohm contact, non-serviceable after assembly. Solders are non-impedance matched contacts. CONTACT FINISHES: Suffix Finish 1 0.00020 min. silver over copper flash 2 0.00005 min. gold (Knoop hardness 130-200) over silver 3 0.00010 min. gold (Knoop hardness 130-200) over silver 4 0.00010 min. gold (Knoop hardness 130-200) over copper 5 0.00005 min. gold (Knoop hardness 130-200) over nickel E 0.00005 min. gold (Knoop hardness 90 max.) over copper F 0.00005 min. gold (Knoop hardness 130-200) over copper H 0.00010 min. gold (Knoop hardness 130-200) over copper 45 Coaxial Contacts for miniature cylindrical connectors, cont. solder (MIL-DTL-26482 Series 1 type) - application data MATING PIN DIA L H F G SOCKET L H F G MATING PIN DIA PIN SOLDER COAX CONTACTS For use in Miniature Solder Type Connectors: PT, SP, and MS/PT Styles Dimensional Data (See Drawings above) Contact Part Number Contact Size Cable Pin RG-58C/U, RG-141A/U, RG-303/U Socket G Dia. H Dia. 0.001 F Across Flats 0.004 Pin Crimp Ferrule Tools Retainer Nut Wrench Socket MIL-T-22910/7-1 Tool Use with Die Part Number MIL-C-22520/5-01 Tool Use with Die Part Number MIL-C-22520/10-01 Tool Use with Die Part Number M22910/7-15 (B) M22520/5-05 (B) M22520/5-41 (B) M22520/10-07 (B) M22910/7-18 (B) M22520/5-45 (B) 11-8676-3 11-8678-2 L Length Ref. 21-33020-2 21-33019-2 8S 0.040 0.001 0.219 0.280 1.114 1.115 21-33020-1 21-33019-1 8L 0.040 0.001 0.219 0.280 1.176 1.177 21-33020-3 21-33019-3 8S 0.040 0.001 0.219 0.280 1.114 1.115 RG-142B/U, Times MI51115 21-33020-7* 21-33019-7* 8S 0.040 0.001 0.219 0.280 1.114 1.115 M22910/7-16 (B) M22520/5-43 (B) RG-161/U, RG-174A/U, RG-179B/U, RG-187A/U, RG-188A/U, RG-316/U 21-33020-32* 21-33019-32* 12S 0.0300 0.0005 0.140 0.172 1.092 1.093 M22910/7-12 (B) M22520/5-03 (A) M22520/5-08 (A) M22520/5-35 (B) M22520/10-05 (A) 11-8676-1 RG-178B/U 21-33020-4 21-33019-4* 8S 0.040 0.001 0.219 0.280 1.114 1.115 M22910/7-11 (B) M22520/5-03 (B) M22520/5-33 (B) M22520/10-05 (B) 11-8676-2 RG-196A/U 21-33020-31 21-33061-31* 12S 0.0300 0.0005 0.140 0.172 1.092 1.093 M22910/7-11 (B) M22520/5-03 (B) M22520/5-33 (B) M22520/10-05 (B) 11-8676-1 RG-180B/U, RG-195A/U, Raychem 5022D1312-9 21-33020-5* 21-33019-5* 8S 0.040 0.001 0.219 0.280 1.114 1.115 M22910/7-15 (B) M22520/5-05 (B) M22520/5-41 (B) M22520/10-07 (B) 11-8676-2 Raychem 5021D1331-9 21-33020-6* 21-33019-6* 8S 0.040 0.001 0.219 0.280 1.114 1.115 M22910/7-15 (B) M22520/5-05 (B) M22520/5-41 (B) M22520/10-07 (B) 11-8676-2 Thermatics 2929-29 21-33020-33 21-33061-33 12S 0.0200 0.0005 0.140 0.172 1.092 1.093 M22910/7-13 (B) M22520/5-37 (B) RG-59B/U, RG-62A/U, RG-62B/U, RG-210/U NOTE: Contacts can be ordered by part numbers given in chart NOTE: Size 8S and 12S contacts are used with connector inserts through shell size 18 only. For larger connector shell sizes, use size 8L contacts. CONTACT FINISH: For all contacts in this series feature 0.000050 minimum gold (Knoop hardness 130-200). 11-8676-2 11-8676-1 * Consult Amphenol, Sidney NY for availability CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers indicate applicable die closure. Commercial equivalents with the same die closure dimension may be used. 21-33020-31 and 21-33061-31 only mate with each other 46 Coaxial Contacts for miniature cylindrical connectors, cont. crimp SE (MIL-DTL-26482 Series 1 type) - application data L F L G H G H MATING PIN DIA MATING PIN DIA SOCKET F PIN NOTE: All contacts of the same size and the same inner and outer contact diameters (G & H) will mate with each other. SE CRIMP COAX CONTACTS For use in Miniature Crimp Type Connectors: PT-SE, SP-SE, and MS/PT-SE Styles Contact Part Number Cable RG-55B/U, RG-142A/U, RG-142B/U, RG-223/U RG-58C/U, RG-141A/U, RG-303/U RG-59B/U, RG-62A/U, RG-62B/U, RG-210/U RG-140/U, RG-302/U RG-161/U, RG-174A/U, RG-179B/U, RG-187A/U, RG-188A/U, RG-316/U RG-178B/U, RG-196A/U Dimensional Data (See Drawings above) Finish Contact on Type Size Mating Parts Pin Socket 21-33012-21 21-33012-25 21-33038-21 21-33038-25* 21-33011-21 21-33011-25 21-33037-21 21-33037-25 8 8 8 8 I II I II 21-33138-21( )* 21-33138-25( )* 21-33137-21( )* 21-33137-25( )* 8 8 I II 21-33012-22 21-33012-26 21-33038-22* 21-33038-26* 21-33138-22( )* 21-33138-26( )* 21-33011-22 21-33011-26 21-33037-22 21-33037-26* 21-33137-22( ) 21-33137-26( )* 8 8 8 8 8 8 I II I II I II G Dia. H Dia. 0.001 F Across Flats 0.004 0.0355 0.0010 0.218 0.0355 0.0010 Installation Tools Crimp Ferrule Tools L Length Ref. Retainer Nut Wrench Socket MIL-T-22910/7-1 Tool Use with Die Part Number MIL-C-22520/5-01 Tool Use with Die Part Number MIL-C-22520/10-0 Tool Use with Die Part Number 0.280 1.156 1.144 M22910/7-17 (B) M22520/5-05 (A) M22520/5-19 (B) M22520/10-07 (A) 11-8676-2 11-8369-5 11-7880-8 11-8660-5 11-8154-1 0.218 0.280 1.156 1.144 M22910/7-15 (B) M22520/5-05 (B) M22520/5-41 (B) M22520/10-07 (B) 11-8676-2 11-8369-4 11-7880-8 11-8660-4 11-8154-1 0.0355 0.0010 0.218 0.280 1.156 1.144 M22910/7-18 (B) M22520/5-45 (B) 11-8676-3 11-8369-5 11-7880-8 11-8660-5 11-8154-1 0.0355 0.0010 0.218 0.280 1.156 1.144 M22910/7-17 (B) M22520/5-05 (A) M22520/5-19 (B) 11-8676-2 11-8369-5 11-7880-8 11-8660-5 11-8154-1 0.0355 0.0010 0.218 0.280 1.156 1.144 11-8676-2 11-7880-8 11-8154-1 Pin Insertion Removal 2 4 ** 2 4 ** 21-33012-36 21-33011-36 8 II 2 21-33038-36* 21-33037-36 8 II 4 21-33138-36( )* 21-33137-36( ) 8 II ** 21-33012-37* 21-33011-37* 8 II 2 21-33038-37* 21-33037-37* 8 II 4 21-33138-37( )* 21-33012-34 21-33012-30 21-33038-34 21-33038-30 21-33138-34( )* 21-33138-30( )* 21-33012-1 21-33012-4 21-33038-1* 21-33038-4 21-33137-37( )* 21-33011-34 21-33011-30 21-33037-34 21-33037-30 21-33137-34( )* 21-33137-30( )* 21-33011-1 21-33011-4 21-33037-1* 21-33037-4* 8 8 8 8 8 8 8 12 12 12 12 II I II I II I II I II I II ** 21-33138-1( )* 21-33138-4( )* 21-33137-1( ) 21-33137-4( )* 12 12 I II ** 21-33012-35 21-33011-35 8 I 2 21-33038-35 21-33037-35 8 I 4 21-33138-35( )* 21-33137-35( )* 8 I ** 21-33012-3* 21-33012-5 21-33038-3* 21-33038-5 21-33138-3( )* 21-33138-5( )* 21-33011-3* 21-33011-5 21-33037-3* 21-33037-5* 21-33137-3( )* 21-33137-5( )* 12 12 12 12 12 12 I II I II I II M22520/10-07 (A) 2 4 ** M22910/7-12 (B) 2 4 11-8369-2 11-8660-2 M22520/10-05 (A) 0.0200 0.0005 0.128 0.172 1.092 1.072 11-8676-1 11-7880-12 11-8154-2 0.0355 0.0010 0.218 0.280 1.156 1.144 11-8676-2 11-7880-8 11-7880-8 M22910/7-11 (B) 2 4 M22520/5-03 (A) M22520/5-08 (A) M22520/5-35 (B) 0.0200 0.0005 0.128 0.172 M22520/5-03 (B) M22520/5-33 (B) 1.092 1.072 11-8369-1 11-8660-1 11-8676-1 11-7880-12 11-8154-2 ** NOTE: Contacts can be ordered by part numbers given in chart ** See finish options for SE crimp Miniature contacts listed on page 44. Replace the parenthesis of the contact part number with the finish suffix number. However, you should consult Amphenol, Sidney, NY regarding the availability of all finish choices for each part number. * Consult Amphenol, Sidney NY for availability CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers indicate applicable die closure. Commercial equivalents with the same die closure dimension may be used. CHART CONTINUES ON NEXT PAGE 47 Coaxial Contacts for miniature cylindrical connectors, cont. crimp SE (MIL-MDL-26482 Series 1 type) - application data, cont. SE CRIMP COAX CONTACTS For use in Miniature Crimp Type Connectors: PT-SE, SP-SE, and MS/PT-SE Styles Dimensional Data Contact Part Number Cable RG-180B/U, RG-195A/U Raychem 9527E1118, RG-180B/U, RG-195A/U RG-188 or RG-316 Double Braid Thermax 50C-25ADS-1 Pin Socket 21-33012-24 21-33012-46* 21-33011-24 21-33011-46* 8 8 I II 2 21-33038-24 21-33038-46* 21-33037-24 21-33037-46* 8 8 I II 4 21-33138-24( )* 21-33137-24( )* 21-33138-46( )* 21-33137-46( )* 8 8 I II ** 21-33106-40( ) 21-33105-40( ) 12 III ** 21-33012-6* 21-33012-7* 21-33011-6* 21-33011-7* 12 12 I II 2 21-33038-6* 21-33038-7* 21-33037-6* 21-33037-7* 12 12 I II 4 21-33138-6( )* 21-33138-7( )* 21-33137-6( )* 21-33137-7( )* 12 12 I II ** 21-33012-44 21-33011-44 8 II 2 21-33038-44* 21-33037-44* 8 II 4 8 II ** 21-33138-44( )* 21-33137-44( )* RG-195 Double Braid 21-33012-28 21-33011-28 8 I 2 21-33038-28* 21-33037-28* 8 I 4 21-33138-28( )* 21-33137-28( )* RG-122/U, Raychem 5022E5111 8 I ** 21-33012-23 21-33012-27 21-33011-23 21-33011-27 8 8 I II 2 21-33038-23* 21-33038-27 21-33037-23* 21-33037-27 8 8 I II 4 8 8 I II ** 21-33138-23( )* 21-33137-23( )* 21-33138-27( )* 21-33137-27( )* Raychem 9530D5314 21-33012-31 21-33011-31 8 I 2 21-33038-31 21-33037-31 8 I 4 21-33138-31( )* 21-33137-31( )* Raychem 9527A1317 8 I ** 21-33012-39 21-33011-39 8 II 2 21-33038-39* 21-33037-39* 8 II 4 8 II ** 21-33138-39( )* 21-33137-39( )* Raychem 7527A1318 Westrex 199-49-1, Tensolite 30850/87T-1 Finish Contact on Type Size Mating parts 21-33012-40* 21-33011-40 8 II 2 21-33038-40* 21-33037-40* 8 II 4 21-33138-40* 21-33137-40( )* 8 II ** 21-33012-43 21-33011-43 12 II 2 21-33038-43 21-33037-43 12 II 4 12 II ** 21-33138-43( )* 21-33137-43( )* Installation Tools Crimp Ferrule Tools G Dia. H Dia. 0.001 F Across Flats 0.004 0.0355 0.0010 0.218 0.280 0.0200 0.0005 0.128 0.0200 0.0005 0.128 L Length Ref. Pin Socket 1.156 1.114 0.899 0.879 0.172 MIL-T-22910/7-1 47MIL-C-22520/5-01 MIL-C-22520/10-0 Tool Tool Tool Use with Die Part Use with Die Part Use with Die Part Number Number Number M22520/7-15 (B) M22520/5-05 (B) M22520/5-41 (B) Retainer Nut Wrench Insertion Removal 11-8369-4 11-8660-4 11-7880-8 11-8154-1 11-8674-2 11-7880-12 11-8154-2 11-8676-1 11-8369-2 11-8660-2 11-7880-12 11-8154-2 11-8676-2 11-8369-4 11-8660-4 11-7880-8 11-8154-1 M22520/10-07 (B) 11-8676-2 Daniels GS200 Tool with G2P330 or M22520/31-01 Tool with Positioner M22520/31-02 1.092 1.072 M22910/7-13 (B) M22520/5-37 (B) 0.0355 0.0010 0.128 0.280 1.156 1.144 0.0355 0.0010 0.128 0.280 1.156 1.144 M22910/7-16 (B) M22520/5-43 (B) 11-8676-2 11-8369-4 11-8660-4 11-7880-8 11-8154-1 0.0355 0.0010 0.218 0.280 1.156 1.144 M22520/7-15 (B) M22520/5-05 (B) M22520/5-41 (B) M22520/10-07 (B) 11-8676-2 11-8369-4 11-8660-4 11-7880-8 11-8154-1 0.0355 0.0010 0.218 0.280 1.156 1.144 M22910/7-15 (B) M22520/5-05 (B) M22520/5-41 (B) M22520/10-07 (B) 11-8676-2 11-8369-4 11-8660-4 11-7880-8 11-8154-1 0.0355 0.0010 0.218 0.280 1.156 1.144 M22910/7-12 (B) M22520/5-03 (A) M22520/5-08 (A) M22520/5-35 (B) M22520/10-05 (A) 11-8676-2 11-8369-2 11-8660-2 11-7880-8 11-8154-1 0.0200 0.0005 0.128 0.172 1.092 1.072 M22910/7-11 (B) M22520/5-03 (B) M22520/5-33 (B) M22520/10-05 (B) 11-8676-1 11-8369-1 11-8660-1 11-7880-12 11-8154-2 NOTE: Contacts can be ordered by part numbers given in chart ** See finish options for SE crimp Miniature contacts listed on page 44. Replace the parenthesis of the contact part number with the finish suffix number. However, you should consult Amphenol, Sidney, NY regarding the availability of all finish choices for each part number. * Consult Amphenol, Sidney NY for availability 48 CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers indicate applicable die closure. Commercial equivalents with the same die closure dimension may be used. Mounting Recommendations for miniature cylindrical connectors FLANGE MOUNTED CONNECTORS All flange mounting PT connectors use standard MS mounting dimensions. They cannot be back panel mounted due to coupling clearance. The PTB (thru-bulkhead) type connector must also be back panel mounted on one side. Flange gaskets are available for both series, see page 37. R (TP) Shell Size FLANGE MOUNTED CONNECTORS D Dia. PT, PTB SP PT SP, PTB 6 .469 .641 .323 .439 8 .594 .734 .449 .563 10 .719 .812 .573 .680 12 .812 .938 .699 .859 14 .906 1.031 .823 .984 16 .969 1.125 .949 1.108 18 1.062 1.203 1.073 1.233 20 1.156 1.297 1.199 1.358 22 1.250 1.375 1.323 1.483 24 1.375 1.449 1.449 - 4 HOLES .120 Dia. for Shell Sizes 6-22 PC & PT .147 Dia. for Size 24 PT .150 Dia. for SP only R (TP) No. 4 Screw for PC & PT No. 6 Screw for SP and for Size 24 PT D Dia. R 2 R 2 SECTION CUT-OUT JAM NUT MOUNTINGS JAM NUT MOUNTINGS The jam nut design has become very popular because it allows bench wiring of harness assemblies. The labor saving often offsets the added cost of the jam nut receptacle which is due to the self contained "O" ring and the extra nut. Shell Size 6 R +.010 -.000 .447 B +.000 -.010 .420 F .010 .286 P Panel Thickness Min. .062 F Max. .125 B 8 .572 .542 .331 .062 .125 R 10 .697 .669 .375 .062 .125 12 .884 .830 .442 .062 .125 14 1.007 .955 .486 .062 .125 16 1.134 1.084 .530 .062 .125 18 1.259 1.208 .573 .062 .125 PT ONLY 20 1.384 1.333 .641 .062 .250 22 1.507 1.459 .685 .062 .250 24 1.634 1.575 - .062 .250 R F CUT-OUT FOR HERMETIC RECEPTACLE MOUNTINGS This series must be mounted in such a way as to preserve the hermetic seal provided by the glass insert. Mounting data for box and jam nut receptacles is given above. Cut-out required for solder mounting receptacles (N) is given below. Shell Size N Max. 6 .458 The finish of each of these hermetic receptacles is fused electrodeposited tin for easy solderability, and protected by a special lacquer for optimum shelf life. The lacquer will not interfere with any soldering operation. 8 10 .582 .692 12 .801 14 16 18 20 22 24 .926 1.051 1.176 1.395 1.375 1.520 Low temperature solder should be used and the addition of a solder fillet at arrow points on drawing at right is recommended. Care must be taken that the operating temperature of the final assembly does not rise above the melting point of tin (440 F). 49 F JAM NUT MOUNTINGS F B CUT-OUT FOR PIN LOCATION PT ONLYFOR PC ONLY SECTION PIN LOCATION FOR PC ONLY HERMETIC RECEPTACLES N CUT-OUT SOLDER RECEPTACLE JAM NUT RECEPTACLE (See dimensions above) BOX RECEPTACLE (See dimensions above) Other Amphenol Miniature Cylindrical Connectors Geophysical Miniature Cylindricals Designed for the Geophysical industry's rugged environments, the Amphenol(R) RPT Series connector has custom features that provide reliability in extreme temperature and moisture conditions. The unique shell design provides stronger shells along with an anodized (non-conductive) finish for greater salt, corrosion and abrasion resistance. Coupling nuts are manufactured with round detent holes and are sold separately for greater customer flexibility. See product data sheet #146. RJ Field Bayonet Cylindricals Amphenol PCD division provides MIL-DTL-26482 bayonet coupling cylindrical connectors with an RJ45 Ethernet interface*. These are designed for use in all levels of harsh environments from industrial to mil-aero applications providing IP67 protection from dust, fluids, vibration, shock and traction. The Amphenol(R) RJ Field allows the use of Ethernet Class D/Cat 5 and Cat 5e connections for 10 BaseT, 100 Base TX, or 1000 BaseT networks. It works with any standard RJ45 cordset with no extra tooling. It also offers reinforced EMI protection. For more information go online to www.rjfield.com or ask for the Field Series brochure. * RJ Field Bayonet and other Field Series products are available through Amphenol PCD. These include RJF TV within MIL-DTL-38999 Series III threaded coupling connectors, and RJF 544 within ECTA push-pull plastic shell coupling. 50