3020 Mid Power Operating Characteristics
Note 1: To prevent damage refer to operating conditions and derating curves for appropriate maximum operating conditions
Note 2: Maximum operating case temperature combined with maximum drive current denes the total maximum operating condition for the device. To
prevent damage, please follow derating curves for all operating conditions.
Note 3: Mid power LEDs are designed for operation up to an absolute maximum forward drive current as specied above. Product lifetime data is specied at
typical forward drive currents. Sustained operation at absolute maximum currents will result in a reduction of device lifetime compared to typical
forward drive currents. Actual device lifetimes will also depend on case temperature. Refer to the current vs. case temperature derating curves for
further information.
Note 4: Caution must be taken not to stare at the light emitted from these LEDs. Under special circumstances, the high intensity could damage the eye.
4
PDS-002328 Rev 07 © 2015 Luminus Devices, Inc. - All Rights Reserved
3020 Mid Power Product Datasheet
Optical and Electrical Characteristics(Tc=25C)
Parameter Symbol Minimum Typical Maximum Unit Condition
Forward Voltage Vf6.1 6.4 V If=120mA
Reverse Current Ir10 uA Vr=5V
View Angle 2θ1/2 110 º If=120mA
Thermal Resistance Rthj-sp 23 ºC/W If=120mA
Electrostatic Discharge ESD 1000 V
Parameter Symbol Rating Unit
Forward Current If150 mA
Pulse Forward Current Ifp 200 mA
Power Dissipation Pd816 mW
Reverse Voltage Vr5 V
Operating Temperature Topr -40~+85 °C
Storage Temperature Tstg -40~+85 °C
Junction Temperature Tj125 °C
Soldering Temperature Tsld 230 °C or 260 °C for 10 sec
Absolute Maximum Ratings (Tc=25C)
*IFP condition with Pulse: Width ≤100μs Duty cycle ≤1/10