1N3821UR-1 thru 1N3830AUR-1, e3 or MLL3821 thru MLL3830A, e3 SCOTTSDALE DIVISION LEADLESS GLASS ZENER DIODES APPEARANCE This surface mountable zener diode series is similar to the lower voltage 1N3821 thru 1N3830 JEDEC registration except it is in a surface mount DO-213AB package outline. It is an ideal selection for applications of high density and low parasitic requirements. Due to its glass hermetic qualities and enhanced metallurgical bonded internal construction, it is also well suited for high reliability applications. This can be acquired by a source control drawing (SCD), or simply by ordering device types with a MQ, MX or MV prefix for equivalent screening to JAN, JANTX or JANTXV respectively. WWW . Microsemi .C OM DESCRIPTION DO-213AB IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com FEATURES * * * * * * * * APPLICATIONS / BENEFITS Leadless package for surface mount equivalent to 1N3821 thru 1N3830A. Ideal for high-density mounting Lower voltage selections of 3.3 V to 7.5 V Hermetically sealed, double-slug glass construction Metallurgically enhanced contact construction Options for screening in accordance with MIL-PRF19500/115 for JAN, JANTX, and JANTXV with MQ, MX or MV prefixes respectively for part numbers, e.g. MX1N3821AUR-1, MV1N3828AUR-1, etc. Axial lead "thru-hole" DO-13 packages per JEDEC registration available as 1N3821A thru 1N3830A (see separate data sheet with MIL-PRF-19500/115 qualification) RoHS Compliant devices available by adding "e3" suffix * * * * * * * * * MAXIMUM RATINGS * * * * * MECHANICAL AND PACKAGING Power dissipation at 25 C: 1.5 watts (also see derating in Figure 1). Operating and Storage temperature: -65 C to +175 C Thermal Resistance: 40 C/W junction to end cap, or 120C/W junction to ambient when mounted on FR4 PC board (1 oz Cu) with recommended footprint (see last page) Steady-State Power: 1.50 watts at end-cap temperature TEC < 115oC, or 1.25 watts at TA = 25C when mounted on FR4 PC board and recommended footprint as described for thermal resistance (also see Figure 1) Forward voltage @200 mA: 1.2 volts (maximum) Solder Temperatures: 260 C for 10 s (max) Copyright (c) 2006 3-12-2006 REV C * * * * * * CASE: Hermetically sealed glass MELF package TERMINALS: Tin-Lead (SN/Pb) or RoHS compliant annealed matte-Tin (Sn) plating solderable per MIL-STD-750, method 2026 POLARITY: Cathode indicated by band. Diode to be operated with the banded end positive with respect to the opposite end for Zener regulation MARKING: Cathode band only TAPE & REEL optional: Standard per EIA-481-1A with 12 mm tape, 1500 per 7 inch reel or 5000 per 13 inch reel (add "TR" suffix to part number) WEIGHT: 0.05 grams * See package dimensions on last page Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 1N3821UR-1 thru 1N3830AUR-1,e3 or MLL3821 thru hru MLL3830A,e3 * Regulates voltage over a broad operating current and temperature range Leadless package for surface mounting Tight voltage tolerances available Ideal for high-density mounting Metallurgically enhanced internal contact design for greater reliability and lower thermal resistance Nonsensitive to ESD Hermetically sealed glass package Specified capacitance (see Figure 2) Inherently radiation hard as described in Microsemi MicroNote 050 Page 1 1N3821UR-1 thru 1N3830AUR-1, e3 or MLL3821 thru MLL3830A, e3 SCOTTSDALE DIVISION LEADLESS GLASS ZENER DIODES WWW . Microsemi .C OM *ELECTRICAL CHARACTERISTICS @ 25oC INDUSTRY TYPE NUMBER** (NOTE 1) MICROSEM I PART NUMBER (NOTE 3) 1N3821UR-1 1N3821AUR-1 1N3822UR-1 1N3822AUR-1 1N3823UR-1 1N3823AUR-1 1N3824UR-1 1N3824AUR-1 1N3825UR-1 1N3825AUR-1 1N3826UR-1 1N3826AUR-1 1N3827UR-1 1N3827AUR-1 1N3828UR-1 1N3828AUR-1 1N3829UR-1 1N3829AUR-1 1N3830UR-1 1N3830AUR-1 MLL3821 MLL3821A MLL3822 MLL3822A MLL3823 MLL3823A MLL3824 MLL3824A MLL3825 MLL3825A MLL3826 MLL3826A MLL3827 MLL3827A MLL3828 MLL3828A MLL3829 MLL3829A MLL3830 MLL3830A NOMINAL ZENER VOLTAGE MAXIMUM ZENER IMPEDANCE (Note 2) MAXIMUM ZENER CURRENT MAXIMUM REVERSE CURRENT TYPICAL TEMP.COEFF. OF ZENER VOLTAGE VZ @ IZT ZENER TEST CURRENT (NOTE 1) IZT ZZT @ IZT ZZK@ IZK= 1 mA (Note 3) VOLTS mA OHMS OHMS mA A Volt s %/oC 3.3 3.3 3.6 3.6 3.9 3.9 4.3 4.3 4.7 4.7 5.1 5.1 5.6 5.6 6.2 6.2 6.8 6.8 7.5 7.5 76 76 69 69 64 64 58 58 53 53 49 49 45 45 41 41 37 37 34 34 10 10 10 10 9 9 9 9 8 8 7 7 5 5 2 2 1.5 1.5 1.5 1.5 400 400 400 400 400 400 400 400 500 500 550 550 600 600 700 700 500 500 250 250 414 414 378 378 357 357 320 320 291 291 267 267 243 243 219 219 200 200 182 182 100 100 100 100 50 50 10 10 10 10 10 10 10 10 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 2 2 3 3 3 3 3 3 -.066 -.066 -.058 -.058 -.046 -.046 -.033 -.033 -.015 -.015 +/-.010 +/-.010 +.030 +.030 +.049 +.049 +.053 +.053 +.057 +.057 IZM IR @ V R VZ * JEDEC registered data for 1N3821 thru 3830A equivalents except for lower reverse (leakage) current IR and higher maximum zener current IZM. ** When applicable, add MQ, MX, or MV prefix to the 1N3821AUR-1 thru 1N3828AUR-1 part numbers for screening options in accordance with MIL-PRF-19500/115. NOTE 1: Suffix A signifies a +/-5% tolerance on nominal zener voltage. No suffix designates +/-10% tolerance. If tighter tolerance is required, suffix C is used to identify +/-2%; and suffix D is to identify +/-1% tolerance. VZ is measured with the diode in thermal equilibrium in 25oC still air. The test currents (IZT) at the listed nominal zener voltages provide a constant 0.25 watts for this device series per JEDEC registration. NOTE 2: The zener impedance is derived when a 60 cycle ac current having an rms value equal to 10% of the dc zener current (IZT or IZK) is superimposed on IZT or IZK. Zener impedance is measured at 2 points to ensure a sharp knee on the breakdown curve and to eliminate unstable units. See MicroNote 202 for variation in dynamic impedance with different zener currents. NOTE 3: This product series has been previously identified as MLL3821 thru MLL3830A by Microsemi. This alternate name may still be used, however the Industry name of 1N3821UR-1 thru 1N3830UR-1 is preferred. 1N3821UR-1 thru 1N3830AUR-1,e3 or MLL3821 thru MLL3830A,e3 Copyright (c) 2006 3-12-2006 REV C Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 2 1N3821UR-1 thru 1N3830AUR-1, e3 or MLL3821 thru MLL3830A, e3 SCOTTSDALE DIVISION LEADLESS GLASS ZENER DIODES WWW . Microsemi .C OM OUTLINE AND CIRCUIT PD Power Dissipation (WATTS) STEADY-STATE POWER DERATING TEC TA Temperature (oC). FIGURE 1 Typical Zener Impedance vs FIGURE 2 Typical Capacitance vs. Reverse Voltage Zener Current for Types Shown PACKAGE DIMENSIONS INCHES MIN MAX 0.094 0.105 0.189 0.205 0.016 0.022 MILLIMETERS MIN MAX 2.39 2.66 4.80 5.20 0.41 0.55 FIGURE 3 Typical Zener Voltage Temperature Coeff. vs. Zener Voltage PAD LAYOUT A B C Copyright (c) 2006 3-12-2006 REV C INCHES .276 0.070 0.110 mm 7.00 1.8 2.8 Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 1N3821UR-1 thru 1N3830AUR-1,e3 or hru MLL3830A,e3 MLL3821 thru DIM A B C Page 3