RF3417E - RFM (RF Monolithics, Inc.)

www.RFM.com E-mail: info@rfm.com Page 1 of 4

Electrical Characteristics

Characteristic Sym Notes Minimum Typical Maximum Units

Center Frequency @ 25° C Absolute Frequency fC1, 2, 3 314.900 315.00 315.100 MHz

Insertion Loss IL 1 1.8 2.5 dB

3 dB Bandwidth BW31, 3 525 600 675 kHz

1 dB Bandwidth BW11, 3 450 kHz

Rejection 10 - 275 MHz

1, 3, 10, 11

40 60

275 - 306 MHz 40 45

306 - 313.2 MHz 25 30

313.2 - 314.2 MHz 7 15

315.8 - 317 MHz 12 15

317 - 321.8 MHz 25 30

321.8 - 326 MHz 12 17

326 - 355 MHz 37 45

355 - 1000 MHz 50 55

Temperature Freq. Temp. Coefficient FTC 3, 4 0.032 ppm/°C2

Turnover Temperature To 3, 4 10 40 °C

Frequency Aging Absolute Value during the First Year |fA| 5 <±10 ppm/yr

Impedance @ fC Input ZIN = RIN/CIN ZIN 13.7kΩ // 2.03pF

Output ZOUT = ROUT/COUT ZOUT 5.4kΩ // 2.17pF

Lid Symbolization (in addition to Lot and/or Date Codes) 696 // YWWS

Standard Reel Quantity 7 Inch Reel 9500 Pieces/Reel

Standard Reel Quantity 13 Inch Reel 3000 Pieces/Reel

• Ideal Front-End Filter for European Wireless Receivers

• Low-Loss, Coupled-Resonator Quartz Design

• Simple External Impedance Matching

• Complies with Directive 2002/95/EC (RoHS)

The RF3417E is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter designed to provide

front-end selectivity in 315.0 MHz receivers. Receiver designs usi ng this f ilter i ncl ude superhet with 10.7 MHz

or 500 kHz IF, direct conversion and superregen. Typical applications of these receivers are wireless remote-

control and security devices operating in Europe under ETSI I-ETS 300 220, in Germany under FTZ 17 TR

2100, in the United Kingdom under DTI MPT 1340 (for automotive only), in France under PTT Specifications

ST/PA A/TPA/AGH/1542, and in Scandinavia.

This coupled-resonator filter (CRF) uses selective null placement to provide suppression, typically greater

than 40 dB, of the LO and image spurious res ponses of superhet receive rs with 10.7 MHz IF. RFM’s

advanced SAW design and fabrication technology is utilized to achieve high performance and very low loss

with simple external impedance matching (not included).

315.00 MHz

SAW Filter

RF3417E

CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.

Notes:

1. Unless noted otherwise, all measurements are made with t he filter installed in the specified test fixture which is connected to a 50 Ω test system with

VSWR ≤ 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, fc. Note that insertion loss and band-

width are dependent on the impedance matching component values and quality.

2. The frequency fc is defined as the midpoint between the 3dB frequencies.

3. Where noted, specifications apply over the entire specified operating temperature range of -40 to 90°C.

4. The turnover temperature, TO, is the temperature of maximum (or turnover) frequency, fo. The nominal frequency at any case temperature, Tc, may

be calculated from: f = fo[1 - FTC (To-T

c)2].

5. Frequency aging is the change in fc with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperat ures

above +65°C. Typically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years.

6. The design, manufacturing process, and specifications of this device are subject to change without notice.

7. One or more of the following U.S. Patents apply: 4,54,488, 4,616,197, and others pending.

8. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale.

9. Tape and Reel Standard for ANSI / EIA 481.

10. These values are attainable by using the optional pin out.

11. Typical rejection is defined as the typical rejection at the worst frequency in the band.

SM3030-6 C a se

3.0 x 3.0

www.RFM.com E-mail: info@rfm.com Page 2 of 4

CH1 S11 1 U FS

Cor

CH2 S22 1 U FS

CENTER 315 . 000 000 MHz SPAN 2. 000 000 MHz

Cor

17 Apr 2007 11:50:38

1 : 50 . 721 3. 2051 1. 6194 nH 315 . 000 000 MHz

1 : 46 . 738 -14 . 436 35 . 001 pF 315 . 000 000 MHz

RF3417E DEMO

FULL 2 PORTS CAL.

Full

www.RFM.com E-mail: info@rfm.com Page 3 of 4

CH1 S21 LOG 2 dB/ REF -2.3 dB

Cor

CH2 S21 LOG 10 dB/ REF -20 dB

CH2 CENTER 315 . 000 000 MHz SPAN 60 . 000 000 MHz

Cor

17 Apr 2007 11:50:52

1 : 0. 0000 dB 0. 000 000 MHz

Max REF=1

CH1 Markers

BW: . 641618 MHz

cent : 315 . 065431 MHz

Q: 491 . 05

1_ loss : -1 . 7003 dB

11 : -1 . 6977 dB 315 . 000 000 MHz

RF3417E DEMO

THRU CAL.

Resp

0.0325

0.029

0.038

0.064

0.0325

0.038

PCB Pad Layout in Inches

www.RFM.com E-mail: info@rfm.com Page 4 of 4

Output Input

Output

Input

Absolute Maximum Ratings

Rating Value Units

Input Power Level 10 dBm

DC V oltage 12 VDC

S torage Temperature -40 to +125 °C

Operable Temperature Range -40 to +125 °C

Soldering Temperature (10 seconds / 5 cycles max.) 260 °C

Pin Connection

1 Input Ground

2 Input

3 Ground

4 Output Ground

5 Output

6 Ground

Electrical Conne ction s

Case Dimensions

Dimension mm Inches

Min Nom Max Min Nom Max

A2.87 3.0 3.13 0.113 0.118 0.123

B2.87 3.0 3.13 0.113 0.118 0.123

C1.12 1.25 1.38 0.044 0.049 0.054

D0.77 0.90 1.03 0.030 0.035 0.040

E2.67 2.80 2.93 0.105 0.110 0.115

F1.47 1.6 1.73 0.058 0.063 0.068

G0.72 0.85 0.98 0.028 0.033 0.038

H1.37 1.5 1.63 0.054 0.059 0.064

I0.47 0.60 0.73 0.019 0.024 0.029

J1.17 1.30 1.43 0.046 0.051 0.056

Matching Circuit to 50Ω

Pin Connection

1 Input

2 Input Ground

3 Ground

4 Output

5 Output Ground

6 Ground

Optional Electrical

Connections

Matching Circuit to 50Ω

100nH 82nH

100nH

82nH