Order this document by BD241B/D SEMICONDUCTOR TECHNICAL DATA . . . designed for use in general purpose amplifier and switching applications. * Collector-Emitter Saturation Voltage -- VCE = 1.2 Vdc (Max) @ IC = 3.0 Adc * Collector-Emitter Sustaining Voltage -- VCEO(sus) = 80 Vdc (Min.) BD241B, BD242B VCEO(sus) = 100 Vdc (Min.) BD241C, BD242C * High Current Gain -- Bandwidth Product fT = 3.0 MHz (Min) @ IC = 500 mAdc * Compact TO-220 AB Package *Motorola Preferred Device IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIII IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIII IIIII IIIIII III IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIII IIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIII 3 AMPERE POWER TRANSISTORS COMPLEMENTARY SILICON 80, 100 VOLTS 40 WATTS MAXIMUM RATINGS Symbol BD241B BD242B BD241C BD242C Unit Collector-Emitter Voltage VCEO 80 100 Vdc Collector-Emitter Voltage VCES 90 115 Vdc Rating Emitter-Base Voltage VEB 5.0 Vdc Collector Current -- Continuous Peak IC 3.0 5.0 Adc Adc Base Current IB 1.0 Adc Total Device Dissipation @ TC = 25_C Derate above 25_C PD 40 0.32 Watts W/_C TJ, Tstg - 65 to + 150 _C Operating and Storage Junction Temperature Range CASE 221A-06 TO-220AB THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance, Junction to Ambient RJA 62.5 _C/W Thermal Resistance, Junction to Case RJC 3.125 _C/W PD, POWER DISSIPATION (WATTS) 40 30 20 10 0 0 20 40 60 80 100 120 140 160 TC, CASE TEMPERATURE (C) Figure 1. Power Derating Preferred devices are Motorola recommended choices for future use and best overall value. REV 7 Motorola, Inc. 1995 Motorola Bipolar Power Transistor Device Data 1 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIII v v IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII ELECTRICAL CHARACTERISTICS (TC = 25_C unless otherwise noted) Characteristic Symbol Min. Max. Unit OFF CHARACTERISTICS Collector-Emitter Sustaining Voltage1 (IC = 30 mAdc, IB = 0) VCEO Collector Cutoff Current (VCE = 60 Vdc, IB = 0) Vdc 80 100 BD241B, BD242B BD241C, BD242C ICEO 0.3 mAdc BD241B, BD241C, BD242B, BD242C Collector Cutoff Current (VCE = 80 Vdc, VEB = 0) (VCE = 100 Vdc, VEB = 0) Adc ICES BD241B, BD242B BD241C, BD242C Emitter Cutoff Current (VBE = 5.0 Vdc, IC = 0) 200 200 IEBO mAdc 1.0 ON CHARACTERISTICS1 DC Current Gain (IC = 1.0 Adc, VCE = 4.0 Vdc) (IC = 3.0 Adc, VCE = 4.0 Vdc) hFE 25 10 Collector-Emitter Saturation Voltage (IC = 3.0 Adc, IB = 600 Adc) VCE(sat) Base-Emitter On Voltage (IC = 3.0 Adc, VCE = 4.0 Vdc) VBE(on) Vdc 1.2 Vdc 1.8 DYNAMIC CHARACTERISTICS Current Gain - Bandwidth Product2 (IC = 500 mAdc, VCE = 10 Vdc, ftest = 1 MHz) fT Small-Signal Current Gain (IC = 0.5 Adc, VCE = 10 Vdc, f = 1 kHz) hfe 1 Pulse Test: Pulse Width 2 fT = |hfe| * ftest. MHz 3.0 20 300 s, Duty Cycle 2.0%. 2.0 APPROX + 11 V VCC Vin Cjd Vin 0 VEB(off) RL t1 APPROX + 11 V t3 RK % Ceb v t t t - 4.0 V t1 7.0 ns 100 t2 500 s t3 15 ns Vin t2 TURN-OFF PULSE [ DUTY CYCLE 2.0% APPROX - 9.0 V Figure 2. Switching Time Equivalent Circuit 2 IC/IB = 10 TJ = 25C 1.0 0.7 0.5 SCOPE t, TIME ( s) TURN-ON PULSE 0.3 tr @ VCC = 30 V tr @ VCC = 10 V 0.1 0.07 0.05 0.03 0.02 0.03 td @ VBE(off) = 2.0 V 0.05 0.07 0.1 0.3 0.5 0.7 1.0 IC, COLLECTOR CURRENT (AMP) Figure 3. Turn-On Time Motorola Bipolar Power Transistor Device Data 3.0 r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) 1.0 0.7 0.5 0.3 D = 0.5 0.2 0.2 0.1 0.1 0.07 0.05 P(pk) ZJC (t) = r(t) RJC RJC = 3.125C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN t1 READ TIME AT t1 t2 TJ(pk) - TC = P(pk) ZJC(t) DUTY CYCLE, D = t1/t2 0.05 0.02 0.03 0.02 0.01 0.01 0.01 SINGLE PULSE 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 t, TIME (ms) 10 20 50 100 200 500 1.0 k VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 4. Thermal Response 10 5.0 1.0 ms There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown. Safe operating area curves indicate IC - VCE limits of the transistor that must be observed for reliable operation, i.e., the transistor must not be subjected to greater dissipation than the curves indicate. The data of Figure 5 is based on TJ(pk) = 150_C; TC is variable depending on conditions. Second breakdown pulse limits are valid for duty cycles to 10% provided T J(pk) 150_C, TJ(pk) may be calculated from the data in Figure 4. At high case temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by second breakdown. 100 s 5.0 ms 2.0 1.0 SECOND BREAKDOWN LIMITED @ TJ 150C THERMAL LIMITATION @ TC = 25C BONDING WIRE LIMITED v 0.5 0.2 CURVES APPLY BELOW RATED VCEO 0.1 5.0 v BD241B, BD242B BD241C, BD242C 10 20 50 IC, COLLECTOR CURRENT (AMP) 100 Figure 5. Active Region Safe Operating Area 1.0 0.7 0.5 0.3 0.2 ts tf @ VCC = 30 V tf @ VCC = 10 V 0.1 TJ = + 25C 200 100 Ceb 70 50 0.07 0.05 0.03 0.03 300 IB1 = IB2 IC/IB = 10 ts = ts - 1/8 tf TJ = 25C CAPACITANCE (pF) t, TIME ( s) 3.0 2.0 0.05 0.07 0.1 0.2 0.3 0.5 0.7 1.0 IC, COLLECTOR CURRENT (AMP) Figure 6. Turn-Off Time Motorola Bipolar Power Transistor Device Data 2.0 3.0 30 0.1 Ccb 0.2 0.3 0.5 1.0 2.0 3.0 5.0 10 VR, REVERSE VOLTAGE (VOLTS) 20 30 40 Figure 7. Capacitance 3 VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) 500 hFE, DC CURRENT GAIN 300 100 70 VCE = 2.0 V TJ = 150C 25C - 55C 50 30 10 7.0 5.0 0.03 0.05 0.07 0.1 0.3 0.5 0.7 1.0 IC, COLLECTOR CURRENT (AMP) 2.0 TJ = 25C 1.6 1.2 IC = 0.3 A 0.4 0 3.0 1.0 V, TEMPERATURE COEFFICIENTS (mV/C) 1.0 0.8 VBE(sat) @ IC/IB = 10 0.6 VBE @ VCE = 2.0 V 0.4 VCE(sat) @ IC/IB = 10 0.1 0.2 0.3 0.5 1.0 2.0 3.0 IC, COLLECTOR CURRENT ( A) 500 + 1.5 + 1.0 *VC FOR VCE(sat) + 0.5 0 - 0.5 - 1.0 - 1.5 VB FOR VBE - 2.0 - 2.5 0.003 0.005 0.01 0.02 0.05 0.1 0.2 0.3 0.5 1.0 Figure 10. "On" Voltages Figure 11. Temperature Coefficients 102 VCE = 30 V 101 TJ = 150C 100 100C REVERSE FORWARD 25C 10- 3 - 0.4 - 0.3 - 0.2 - 0.1 ICES 0 + 0.1 + 0.2 + 0.3 1000 *APPLIES FOR IC/IB 5.0 TJ = - 65C TO + 150C + 2.0 IC, COLLECTOR CURRENT (AMP) 10-1 4 10 20 50 100 200 IB, BASE CURRENT (mA) IC, COLLECTOR CURRENT (AMPS) 103 10- 2 5.0 + 2.5 + 0.4 + 0.5 + 0.6 RBE , EXTERNAL BASE-EMITTER RESISTANCE (OHMS) V, VOLTAGE (VOLTS) TJ = 25C 0 0.003 0.005 0.01 0.020.03 0.05 2.0 Figure 9. Collector Saturation Region 1.4 0.2 3.0 A 0.8 Figure 8. DC Current Gain 1.2 1.0 A 2.0 3.0 107 VCE = 30 V IC = 10 x ICES 106 105 IC ICES IC = 2 x ICES 104 103 102 (TYPICAL ICES VALUES OBTAINED FROM FIGURE 12) 20 40 60 80 100 120 140 160 VBE, BASE-EMITTER VOLTAGE (VOLTS) TJ, JUNCTION TEMPERATURE (C) Figure 12. Collector Cut-Off Region Figure 13. Effects of Base-Emitter Resistance Motorola Bipolar Power Transistor Device Data PACKAGE DIMENSIONS -T- B SEATING PLANE C F T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q 1 2 3 U H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D N INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.018 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 --- --- 0.080 STYLE 1: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.46 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 --- --- 2.04 BASE COLLECTOR EMITTER COLLECTOR CASE 221A-06 TO-220AB ISSUE Y Motorola Bipolar Power Transistor Device Data 5 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, Toshikatsu Otsuki, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-3521-8315 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE (602) 244-6609 INTERNET: http://Design-NET.com HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 6 Motorola Bipolar Power Transistor Device Data *BD241B/D* BD241B/D