ENG3990250913 - Telit - Datasheet.Directory

CLD-CT1084.005

PRODUCT FAMILY DATA SHEET

Cree® PLCC2 1 in 1 SMD LED

CLM1B-RKW/AKW

WWW.CREE.COM/HB

Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

PRODUCT DESCRIPTION

SMD LEDs is packaged in the industry

standard package. These LEDs have

high reliability performance and are

designed to work under a wide range

of environmental conditions.

This high reliability feature makes

them ideally suited to be used under

illumination application conditions.

Its wide viewing angle makes these

LEDs ideally suited for channel letter,

or general backlighting and illumina-

tion applications. The at top emitting

surface makes it easy for these LEDs

to mate with light pipes.

FEATURES

• Size (mm):3.2 x 2.8

• Color and Typical Dominant

Wavelength:

Red (624nm)

Amber (591nm)

• Luminous Intensity (mcd)

CLM1B-RKW:(450 - 1120)

CLM1B-AKW:(450 - 1120)

• Lead-Free

• RoHS Compliant

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

www.cree.com/xlamp

the Cree logo are registered trademarks of Cree, Inc.

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

APPLICATIONS

• Channel Letter

• Architectural Lighting

of Cree, Inc.

Cree PLCC2 1 in 1 SMD LED

CLM1B-RKW/AKW

ABSOLUTE MAXIMUM RATINGS (TA = 25°C)

Items Symbol Absolute Maximum Rating Unit

RKW/AKW

Forward Current IF50 mA

Peak Forward Current Note IFP 200 mA

Reverse Voltage VR5 V

Power Dissipation PD130 mW

Operation Temperature Topr -40 ~ +100 °C

Storage Temperature Tstg -40 ~ +100 °C

Junction Temperature TJ110 °C

Junction/Ambient RTHJA 450 °C/W

Junction/Solder Point RTHJS 300 °C/W

Electrostatic Discharge

Classication(MIL-STD-883E) ESD Class 2

Note: Pulse width ≤0.1 msec, duty ≤1/10.

TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C)

Characteristics Color Symbol Condition Unit Minimum Typical Maximum

Forward Voltage RKW/AKW VFIF = 20 mA V 2.1 2.6

Reverse Current RKW/AKW IRVR = 5 V μA 10

Dominant Wavelength RKW λDIF = 20 mA nm 618 624 630

AKW λDIF = 20 mA nm 584 591 596

Luminous Intensity RKW IVIF = 20 mA mcd 450 650

AKW IVIF = 20 mA mcd 450 750

Note: Continuous reverse voltage can cause LED damage.

of Cree, Inc.

Cree PLCC2 1 in 1 SMD LED

CLM1B-RKW/AKW

INTENSITY BIN LIMIT (IF = 20 mA)

COLOR BIN LIMIT (IF = 20 mA)

Tolerance of measurement of luminous intensity is ±10%.

Red(CLM1B-RKW)

Bin Code Min.(mcd) Max.(mcd)

Ua 450 560

Ub 560 710

Va 710 900

Vb 900 1120

Red (CLM1B-RKW)

Bin Code Min.(nm) Max.(nm)

RA 618 630

Tolerance of measurement of dominant wavelength is ±1 nm.

Amber (CLM1B-AKW)

Bin Code Min.(nm) Max.(nm)

A2 584 587

A3 587 590

A4 590 593

A5 593 596

Amber (CLM1B-AKW)

Bin Code Min.(mcd) Max.(mcd)

Ua 450 560

Ub 560 710

Va 710 900

Vb 900 1120

of Cree, Inc.

Cree PLCC2 1 in 1 SMD LED

CLM1B-RKW/AKW

ORDER CODE TABLE*

Color Kit Number Luminous Intensity (mcd) Dominant Wavelength

Min. Max. Color Bin Min.(nm) Color Bin Max.(nm)

Red CLM1B-RKW-CUaVbAA3 450 1120 RA 618 RA 630

Red CLM1B-RKW-CUbVbAA3 560 1120 RA 618 RA 630

Color Kit Number Luminous Intensity (mcd) Dominant Wavelength

Min. Max. Color Bin Min.(nm) Color Bin Max.(nm)

Amber CLM1B-AKW-CUaVb253 450 1120 A2 584 A5 596

Amber CLM1B-AKW-CUbVb353 560 1120 A3 587 A5 596

Amber CLM1B-AKW-CVaVb353 710 1120 A3 587 A5 596

Notes:

1. The above kit numbers represent order codes that include multiple intensity-bin and color-bin codes. Only one

intensity-bin code and one color-bin code will be shipped on each bulk. Single intensity-bin code and single color-bin

codes will not be orderable.

2. Please refer to the “Cree LED Lamp Reliability Test Standards” document #1 for reliability test conditions.

3. Please refer to the “Cree LED Lamp Soldering & Handling” document #2 for information about how to use this LED

product safely.

#1: Refer to http://www.cree.com/led-components/media/documents/LED_Lamp_Reliability_Test_Standard.pdf

#2: Refer to http://www.cree.com/led-components/media/documents/sh-HB.pdf

of Cree, Inc.

Cree PLCC2 1 in 1 SMD LED

CLM1B-RKW/AKW

GRAPHS

The above data are collected from statistical gures that do not necessarily correspond to the actual

parameters of each single LED. Hence, these data will be changed without further notice.

FIG.2 RELATIVE LUMINOUS INTENSITY VS.

FORWARD CURRENT

IF(mA)

0.0

1.0

4.0

2.0

3.0

5.0

0.0 20 8060 100

FIG.5 RED&AMBER MAXIMUM FORWARD DC CURRENT VS AMBIENT

TEMPERATURE (Tjmax=110 C)

VS. REVERSE VOLTAGE.

FIG.3 RED&AMBER REVERSE CURRENT

FIG.6 FAR FIELD PATTERN

-90 -60 -30 0

0.5

1.0

30 60 90

Angle

VF(V)

2.4

FIG.1 FORWARD CURRENT VS.

20.0

2.0

0.0

2.2 2.6 2.8

60.0

40.0

80.0

100.0

IF (mA)

1.8

Red

Amber

FIG.4 RELATIVE LUMINOUS INTENSITY VS.

(RELATIVE LUMINOUS INTENSITY)

WAVELENGTH.

WL(nm)

80%

20%

40%

60%

100%

700

300 500

400 600 800

RedAmber

Amber

Red

-10

-50

Vr(V)

-30-40 -20

-40

Ir(uA)

-50

-30

-20

-10

-60

IF(mA)

100

20 8060 100

Ta( C)

Rth j-a=450 C/W

Rth j-s=300 C/W

(RELATIVE LUMINOUS INTENSITY)

of Cree, Inc.

Cree PLCC2 1 in 1 SMD LED

CLM1B-RKW/AKW

MECHANICAL DIMENSIONS

All dimensions are in mm.

NOTES

RoHS Compliance

The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or other-

wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold

limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/

EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as

amended through April 21, 2006.

Vision Advisory Claim

Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.

of Cree, Inc.

Cree PLCC2 1 in 1 SMD LED

CLM1B-RKW/AKW

KIT NUMBER SYSTEM

Cree LED lamps are tested and sorted into performance bins. A bin is specied by ranges of color, forward voltage, and

brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp

Packaging Standard” document for more information about shipping and packaging options.

Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are congured in the following man-

ner:

of Cree, Inc.

Cree PLCC2 1 in 1 SMD LED

CLM1B-RKW/AKW

REFLOW SOLDERING

• The CLM1B-RKW/CLM1B-AKW is rated as a MSL 5a product.

• Therecommendedoorlifeoutofbagis24hrs.

• Thetemperatureproleisasbelow.

Use only with CLM1B-RKW/CLM1B-AKW

Solder

Average ramp-up rate = 4ºC/s max

Preheat temperature = 150ºC ~200ºC

Preheat time = 120s max

Ramp-down rate = 6ºC/s max

Peak temperature = 235ºC max

Time within 5ºC of actual Peak Temperature = 10s max

Duration above 217ºC is 45s max

Document

No.:

COTCO

-05-0057

Rev

. NO. : 13

Melting-point

Pre-heat Soak Reflow Cooling

Time

Temperature

Use all SMD besides LP6-NPP1-01-N1

Solder = Sn63-Pb37 Solder = Lead-free

Average ramp-up rate =4ºC/s max. Average ramp-up rate =4ºC/s max

Preheat temperature = 100ºC ~150ºC Preheat temperature = 150ºC ~200ºC

Preheat time = 100s max. Preheat time = 100s max.

Ramp-down rate = 6ºC/s max. Ramp-down rate = 6ºC/s max.

Peak temperature = 230ºC max. Peak temperature = 250ºC max.

Time within 5ºC of actual Peak Temperature = 10s max. Time within 5ºC of actual Peak Temperature = 10s max.

Duration above 183ºC is 80s max. Duration above 217ºC is 80s max.

Only use LP6-NPP1-01-N1 [13]

Solder = Low Lead-free

Average ramp-up rate = 3ºC/s max.

Preheat temperature = 130ºC ~170ºC

Preheat time = 120s max.

Ramp-down rate = 6ºC/s max.

Peak temperature = 213ºC max.

Time within 3ºC of actual Peak Temperature = 25s max.

Duration above 200ºC is 40s max.

Recommended solder pad design for heat dissipation (2-pin SMD LED):

0.5

7.5

7.0

4.5

2.6

1.5

Recommended solder pad design for heat dissipation (4-pin SMD LED)

Referto"http://www.cree.com/led-components/media/documents/sh-HB.pdf"forsoldering&handlingdetails.

of Cree, Inc.

Cree PLCC2 1 in 1 SMD LED

CLM1B-RKW/AKW

NOTES

• The packaging sizes of these SMD products are very small and the resin is still soft after solidication. Users are

required to handle with care. Never touch the resin surface of SMD products.

• To avoid damaging the product’s surface and interior device, it is recommended to choose a special nozzle to pick

up the SMD products during the process of SMT production. If handling is necessary, take special care when picking

up these products. The following method is necessary:

Document No.:

CREE-05-0057

Rev. NO. :

9/9

pickupSMDproductsduringtheprocessofSMTproduction.Ifhandlingisnecessary,itshouldtakemore

careful to pick up these products.Thefollowingtwomethodsarenecessary :

Fig.1a: For Small Top SMD Fig.1b: For Mini side 0.8mm SMD

 ForSmallTopSMDseries,itisrecommendedtouserubbermaterialNozzletopickupSMDproducts.Two

figuresize for reference :

a.) Circular Nozzle: inner diameter: Ø1.8mm+/-0.05mm, outer diameter: Ø2.3mm+/-0.05mm.

b.)Rectangle Nozzle: innersize:1.3mm x 2.3mm,outer size > SMDsize.

6. Electrostatic Discharge and Surge current

 Electrostaticdischarge (ESD) orsurgecurrent(EOS) maydamageSMD LED.

 PrecautionssuchasESDwriststrap,ESDshoestraporantistaticglovesmustbewornwheneverhandlingofSMD LED.

 Alldevices,equipmentandmachinerymustbeproperlygrounded.

 Itisrecommendedto perform electrical test to screen out ESD failures at final inspection.

 Itisimportanttoeliminatethepossibilityofsurgecurrentduringcircuitrydesign

7. Heat Management

HeatmanagementofSMD LEDmustbetakenintoconsiderationduringthedesignstageof SMD LED application. The

current should be de-ratedappropriatelybyreferringtothede-ratingcurveattachedoneachproductspecification.

Dataissubjecttochangewithoutpriornotice.

of Cree, Inc.

Cree PLCC2 1 in 1 SMD LED

CLM1B-RKW/AKW

• The boxes are not water resistant and they must be kept away from water and moisture.

• The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.

• Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.

• The reel pack is applied in SMD LED.

• Max 2000 pcs per reel.

PACKAGING

H UMIC HECK

w ww .vit apac .c om