Datasheet for part number CA3106E24A24P-F80-F0
Our Catalog Part Number: CA3106E24A24P-F80-F0
Brand: Cannon Product Category: Circular Product Line: MIL-DTL 5015 Series I Series: MIL-C-5015
Product Datasheet
Thread Connector with threaded coupling
Shell Style Plug, straight
Endbell Style Endbell with clamp and bushing
Gender Pin
Shell Size 24
Contact Arrangement 24A24
Number of contacts 12 contacts size 12
Contact Type AWG Crimp
Contact Plating Hard silver
Contacts installed no, delivery without contacts
Shielding no
Contact Rating at +20 °C (68 °F)
(Size 25/12) 41 A
Contact Resistance (Size 25/12) 3 mΩ
Operating Voltage
In case of voltages greater than 50V the connector
must be used in accordance with DIN VDE part 410,
IEC 60364-4-41.
Insulator Resistance
Acc. To VG95319, part 2, test no. 5.12
and VG95210, part 32, test conditions B,
standard insulator material > 1000 MΩ
Test Voltage 1600 Vrms
Air and Creepage Paths (Min) 1,1 mm
Ambient Temperature Standard insulator material -55°/+125°C
(-67/257°F)
Safety Provisions IP65 acc. to DIN 40 050
Salt Spray Resistance 500 hours salt spray resistant
Mating Cycles 500 min
Sep. Force per Contact (Size 25/12) 1,5 N
Gage For infos on Gage please see catalog
VG95234, part 1
Coupling Torque Closing: 14 Nm max / Opening: 0,8 Nm min
Contact Retention (Size 25/12) 55 N
Shell Material Aluminium alloy
Shell Plating Olive drab chromate coating over cadmium plating
Insulator and Gromet Material Neoprene
Contact Material Copper alloy
Harnessing Info: Contact Cross-Section See assembly instruction
Harnessing Info: Insulator Diameter See assembly instruction
Wire Stripping (Size 25/12) 6,2 mm
General Info
All tests in accordance with VG95319 and/or if
applicable with VG95210
SC_P_Code CA
Specifications and dimensions subject to change.
Page 1 of
1