(1/21) Conformity to RoHS Directive DC to DC Converters Insulated Type, Ultra Compact Size, 1.5 to 25W Output, 5-year Warranty Period CC-E Series FEATURES * Compact size(almost half floor space of existing product). * No tantalum capacitor and no aluminum electrolytic capacitor are used. * All series are equipped with a built-in remote control function (except for SIP). * Output voltage tolerance 3%(under 10W, at single output). * Light weight(no potting). * It is a product conforming to RoHS directive. * These are PWB halogen-free pc board. * Both mountings of DIP type and SMD type are available. * UL60950-1, C-UL CSA 60950-1 and EN60950-1 approved (partial approved). PART NUMBERS AND RATINGS Output power 1.5W 3W 6W 10W 15W 25W 1 2 3 Input voltage 5V 12V 24V 48V 5V 12V 24V 48V 5V 12V 24V 48V 5V 12V 24V 48V 24V 24V Output voltage 3.3V CC1R5-0503Sx1-E CC1R5-1203Sx-E CC1R5-2403Sx-E CC1R5-4803Sx-E CC3-0503Sx-E CC3-1203Sx-E CC3-2403Sx-E CC3-4803Sx-E CC6-0503Sx-E CC6-1203Sx-E CC6-2403Sx-E CC6-4803Sx-E CC10-0503Sx-E CC10-1203Sx-E CC10-2403Sx-E CC10-4803Sx-E CC15-2403Sx-E CC25-2403Sx-E 5V CC1R5-0505Sx-E CC1R5-1205Sx-E CC1R5-2405Sx-E CC1R5-4805Sx-E CC3-0505Sx-E CC3-1205Sx-E CC3-2405Sx-E CC3-4805Sx-E CC6-0505Sx-E CC6-1205Sx-E CC6-2405Sx-E CC6-4805Sx-E CC10-0505Sx-E CC10-1205Sx-E CC10-2405Sx-E CC10-4805Sx-E CC15-2405Sx-E CC25-2405Sx-E 12V(15V2) CC1R5-0512Sx-E CC1R5-1212Sx-E CC1R5-2412Sx-E CC1R5-4812Sx-E CC3-0512Sx-E CC3-1212Sx-E CC3-2412Sx-E CC3-4812Sx-E CC6-0512Sx-E CC6-1212Sx-E CC6-2412Sx-E CC6-4812Sx-E CC10-0512Sx-E CC10-1212Sx-E CC10-2412Sx-E CC10-4812Sx-E 12V(15V2) or 24V, 30V3 CC1R5-0512Dx-E CC1R5-1212Dx-E CC1R5-2412Dx-E CC1R5-4812Dx-E CC3-0512Dx-E CC3-1212Dx-E CC3-2412Dx-E CC3-4812Dx-E CC6-0512Dx-E CC6-1212Dx-E CC6-2412Dx-E CC6-4812Dx-E CC10-0512Dx-E CC10-1212Dx-E CC10-2412Dx-E CC10-4812Dx-E An "x" within the product name is to be replaced by the symbol representing the terminal structure (F: DIP / R: SMD / S: SIP). Note that the SIP type is limited to 3W. The output voltage can be set to 15V, 15V, by connecting the 12Vout, 12V TRM (output variable) to -Vout. 24V single output is possible by opening the 12Vout COM terminal and connecting the load to +Vout, -Vout. Also, 30V single output is possible when connecting the TRM terminal with -Vout under the same conditions. PRODUCT IDENTIFICATIONS CC3-0505SF-E Form symbols Output mode symbols Output voltage Input voltage Output power F: Horizontal DIP type R: Horizontal SMD type S: Vertical SIP type S: Single output, D: Double output 03: 3.3V / 05: 5V / 12: 12V 05: 5V / 12: 12V / 24: 24V / 48: 48V 1R5: 1.5W / 3: 3W / 6:6W / 10: 10W / 15: 15W / 25: 25W * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * All specifications are subject to change without notice. 002-05 / 20061129 / ea335_cc_e.fm (2/21) CC1R5 Type ELECTRICAL CHARACTERISTICS Part No. CC1R5-0503Sx1-E CC1R5-0505Sx-E CC1R5-0512Sx-E CC1R5-0512Dx-E6 CC1R5-1203Sx-E CC1R5-1205Sx-E CC1R5-1212Sx-E CC1R5-1212Dx-E6 CC1R5-2403Sx-E CC1R5-2405Sx-E CC1R5-2412Sx-E CC1R5-2412Dx-E6 CC1R5-4803Sx-E CC1R5-4805Sx-E CC1R5-4812Sx-E CC1R5-4812Dx-E6 Input voltage (V) Output voltage2 (V) Output current (mA) 4.5 to 9 4.5 to 9 4.5 to 9 4.5 to 9 4.5 to 9 4.5 to 9 9 to 18 9 to 18 9 to 18 9 to 18 9 to 18 9 to 18 18 to 36 18 to 36 18 to 36 18 to 36 18 to 36 18 to 36 36 to 76 36 to 76 36 to 76 36 to 76 36 to 76 36 to 76 3.33% 53% 123% 153%7 125% 155%7 3.33% 53% 123% 153%7 125% 155%7 3.33% 53% 123% 153%7 125% 155%7 3.33% 53% 123% 153%7 125% 155%7 0 to 400 0 to 300 0 to 125 0 to 100 0 to 60 0 to 50 0 to 400 0 to 300 0 to 125 0 to 100 0 to 60 0 to 50 0 to 400 0 to 300 0 to 125 0 to 100 0 to 60 0 to 50 0 to 400 0 to 300 0 to 125 0 to 100 0 to 60 0 to 50 Voltage stability Load3 Input Temperature (mV)max. (mV)max. (mV)max. 20 20 40 40 80 80 20 20 40 40 80 80 20 20 40 40 80 80 20 20 40 40 80 80 40 40 100 100 600 600 40 40 100 100 600 600 40 40 100 100 600 600 40 40 100 100 600 600 80 80 200 200 300 300 80 80 200 200 300 300 80 80 200 200 300 300 80 80 200 200 300 300 Output ripple noise voltage4 (mVp-p) typ./max. 40/120 40/120 30/120 30/120 30/120 30/120 40/120 40/120 30/120 30/120 30/120 30/120 40/120 40/120 30/120 30/120 30/120 30/120 40/120 40/120 30/120 30/120 30/120 30/120 Efficiency5 (%) Inputoutput insulation 71 77 80 80 79 79 73 78 82 82 81 81 72 77 81 81 79 79 70 76 80 80 79 79 Withstand voltage AC.500V 1min Resistance DC.500V 50M min. 1 An "x" within the product name is to be replaced by the symbol representing the terminal structure (F: DIP / R: SMD). Total output voltage is including input, load, and temperature regulation. 3 When the condition is 2-output, it is the balance load (balance load means the condition when the load current of +output and -output is equal). 4 Measurement bandwidth: 50MHz 5 Typical input voltage, maximum output current. 6 2-output products may be used as 24 to 30V single output with COM. terminal open. 7 TRM and -Vout are shorted. * Trim range: 3.3Vout is 3.15 to 3.6V, 5Vout is 4.75 to 6V, 12Vout is 11.4 to 15V, 12Vout is 11.4 to 15V (22.8 to 30V). 2 OUTPUT POWER - AMBIENT TEMPERATURE(DERATING) COMMON SPECIFICATIONS Overcurrent protection Output power(%) 100 b a 80 Natural cooling 60 40 20 Operating temperature range Storage temperature range Humidity range a: 0.5m/s(100LFM) b: 1m/s(200LFM) 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Ambient temperature(C) Vibration Amplitude Withstand voltage Eac Insulation resistance Safety standards Weight Output current limitation system, auto recovery type -40 to +85C[Derating is necessary when operating environment temperature exceed 50C] -40 to +85C 95(%)RH max. [Maximum wet-bulb temperature: 38C] 10 to 55Hz, all amplitude 1.52mm, sweep time 15min[3 directions of X, Y, Z, each 2h] 980m/s2(100G) 6ms[6 directions, each 3 times] Input to output, input to case, output to case: 500V, 1min Input to output, input to case, output to case: 50M min.[DC.500V] UL60950-1, C-UL(CSA22.2 No.60950-1), EN60950-1 certified 3.2g * All specifications are subject to change without notice. 002-05 / 20061129 / ea335_cc_e.fm (3/21) CC1R5 Type SHAPES AND DIMENSIONS CC1R5-xxxxxF-E (DIP TYPE) RECOMMENDED PWB HOLE SIZE, LOCATION [TOP VIEW] 16.60.2 2.92 0.5 1.905 2-o1.5 (Land diameter o2.5) 6 7 a Dimensions in mm Tolerance: 0.5 CC1R5-xxxxxR-E (SMD TYPE) RECOMMENDED PWB HOLE SIZE, LOCATION [TOP VIEW] 8.8max. 4.0 (3.22) 16.60.2 16.51 (13.38) t=0.3 Coplanarity 0.1max. 10.16 (3.22) 1 b 2.7 Shape 1.2 7-0.3x0.6 b 7.62 5 0.5 2 16.51 1.0 2.54 5.08 2.54 2.54 (3.22) b 4 7.62 a 3 2.54 5.08 2.54 12.7 2.7 3.5 1.905 a 7-o1.0 (Land diameter o2.0) 2.54 5.08 2.54 12.7 16.51 Shape 7.62 13.08 3.5 t=0.3 10.16 8.5max. 4.0 14.605 19.81 1.8 1.8 3.2 15.6 3.2 4 2 5 7-0.3x0.6 6 1 7 Dimensions in mm Tolerance: 0.5 CONNECTIONS CC1R5-xxxxSx-E 7 6 5 RC +Vout TRM -Vout 2 -Vin 3 4 NC No.1 No.2 No.3 No.4 No.5 No.6 No.7 +Vin RC -Vin NC -Vout TRM +Vout +Vin 1 7 6 5 RC +Vout TRM COM 2 -Vin 3 4 -Vout Load 1 Load +Vin CC1R5-xxxxDx-E TERMINAL PIN CONFIGUTATION Load (3.22) 2.54 5.08 2.54 3 7.62 2.54 (3.22) 22.0 TERMINAL PIN CONFIGUTATION No.1 No.2 No.3 No.4 No.5 No.6 No.7 +Vin RC -Vin -Vout Common out TRM +Vout * All specifications are subject to change without notice. 002-05 / 20061129 / ea335_cc_e.fm (4/21) CC3 Type(DIP, SMD Types) ELECTRICAL CHARACTERISTICS Part No. CC3-0503Sx1-E CC3-0505Sx-E CC3-0512Sx-E CC3-0512Dx-E6 CC3-1203Sx-E CC3-1205Sx-E CC3-1212Sx-E CC3-1212Dx-E6 CC3-2403Sx-E CC3-2405Sx-E CC3-2412Sx-E CC3-2412Dx-E6 CC3-4803Sx-E CC3-4805Sx-E CC3-4812Sx-E CC3-4812Dx-E6 Input voltage (V) Output voltage2 (V) Output current (mA) 4.5 to 9 4.5 to 9 4.5 to 9 4.5 to 9 4.5 to 9 4.5 to 9 9 to 18 9 to 18 9 to 18 9 to 18 9 to 18 9 to 18 18 to 36 18 to 36 18 to 36 18 to 36 18 to 36 18 to 36 36 to 76 36 to 76 36 to 76 36 to 76 36 to 76 36 to 76 3.33% 53% 123% 153%7 125% 155%7 3.33% 53% 123% 153%7 125% 155%7 3.33% 53% 123% 153%7 125% 155%7 3.33% 53% 123% 153%7 125% 155%7 0 to 800 0 to 600 0 to 250 0 to 200 0 to 125 0 to 100 0 to 800 0 to 600 0 to 250 0 to 200 0 to 125 0 to 100 0 to 800 0 to 600 0 to 250 0 to 200 0 to 125 0 to 100 0 to 800 0 to 600 0 to 250 0 to 200 0 to 125 0 to 100 Voltage stability Load3 Input Temperature (mV)max. (mV)max. (mV)max. 20 20 40 40 80 80 20 20 40 40 80 80 20 20 40 40 80 80 20 20 40 40 80 80 40 40 100 100 600 600 40 40 100 100 600 600 40 40 100 100 600 600 40 40 100 100 600 600 80 80 200 200 300 300 80 80 200 200 300 300 80 80 200 200 300 300 80 80 200 200 300 300 Output ripple noise voltage4 (mVp-p) typ./max. 40/120 40/120 30/120 30/120 30/120 30/120 40/120 40/120 30/120 30/120 30/120 30/120 40/120 40/120 30/120 30/120 30/120 30/120 40/120 40/120 30/120 30/120 30/120 30/120 Efficiency5 (%) Inputoutput insulation 73 77 82 82 81 81 74 79 82 82 81 81 73 78 82 82 81 81 73 79 81 81 80 80 Withstand voltage AC.500V 1min Resistance DC.500V 50M min. 1 An "x" within the product name is to be replaced by the symbol representing the terminal structure (F: DIP / R: SMD). Total output voltage is including input, load, and temperature regulation. 3 When the condition is 2-output, it is the balance load (balance load means the condition when the load current of +output and -output is equal). 4 Measurement bandwidth: 50MHz 5 Typical input voltage, maximum output current. 6 2-output products may be used as 24 to 30V single output with COM. terminal open. 7 TRM and -Vout are shorted. * Trim range: 3.3Vout is 3.15 to 3.6V, 5Vout is 4.75 to 6V, 12Vout is 11.4 to 15V, 12Vout is 11.4 to 15V. 2 OUTPUT POWER - AMBIENT TEMPERATURE(DERATING) COMMON SPECIFICATIONS Overcurrent protection Output power(%) 100 b a 80 Natural cooling 60 40 20 Operating temperature range Storage temperature range Humidity range a: 0.5m/s(100LFM) b: 1m/s(200LFM) 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Ambient temperature(C) Amplitude Vibration Withstand voltage Eac Insulation resistance Safety standards Weight Output current limitation system, auto recovery type -40 to +85C[Derating is necessary when operating environment temperature exceed 50C] -40 to +85C 95(%)RH max. [Maximum wet-bulb temperature: 38C] 10 to 55Hz, all amplitude 1.52mm, sweep time 15min[3 directions of X, Y, Z, each 2h] 980m/s2(100G) 6ms[6 directions, each 3 times] Input to output, input to case, output to case: 500V, 1min Input to output, input to case, output to case: 50M min.[DC.500V] UL60950-1, C-UL(CSA22.2 No.60950-1), EN60950-1 certified 4.5g * All specifications are subject to change without notice. 002-05 / 20061129 / ea335_cc_e.fm (5/21) CC3 Type(SIP Type) ELECTRICAL CHARACTERISTICS Part No. CC3-0503SS-E CC3-0505SS-E CC3-0512SS-E CC3-0512DS-E5 CC3-1203SS-E CC3-1205SS-E CC3-1212SS-E CC3-1212DS-E5 CC3-2403SS-E CC3-2405SS-E CC3-2412SS-E CC3-2412DS-E5 CC3-4803SS-E CC3-4805SS-E CC3-4812SS-E CC3-4812DS-E5 Input voltage (V) Output voltage1 (V) Output current (mA) 4.5 to 9 4.5 to 9 4.5 to 9 4.5 to 9 4.5 to 9 4.5 to 9 9 to 18 9 to 18 9 to 18 9 to 18 9 to 18 9 to 18 18 to 36 18 to 36 18 to 36 18 to 36 18 to 36 18 to 36 36 to 76 36 to 76 36 to 76 36 to 76 36 to 76 36 to 76 3.33% 53% 123% 153%6 125% 155%6 3.33% 53% 123% 153%6 125% 155%6 3.33% 53% 123% 153%6 125% 155%6 3.33% 53% 123% 153%6 125% 155%6 0 to 800 0 to 600 0 to 250 0 to 200 0 to 125 0 to 100 0 to 800 0 to 600 0 to 250 0 to 200 0 to 125 0 to 100 0 to 800 0 to 600 0 to 250 0 to 200 0 to 125 0 to 100 0 to 800 0 to 600 0 to 250 0 to 200 0 to 125 0 to 100 Voltage stability Load2 Input Temperature (mV)max. (mV)max. (mV)max. 20 20 40 40 80 80 20 20 40 40 80 80 20 20 40 40 80 80 20 20 40 40 80 80 40 40 100 100 600 600 40 40 100 100 600 600 40 40 100 100 600 600 40 40 100 100 600 600 80 80 200 200 300 300 80 80 200 200 300 300 80 80 200 200 300 300 80 80 200 200 300 300 Output ripple noise voltage3 (mVp-p) typ./max. 40/120 40/120 30/120 30/120 30/120 30/120 40/120 40/120 30/120 30/120 30/120 30/120 40/120 40/120 30/120 30/120 30/120 30/120 40/120 40/120 30/120 30/120 30/120 30/120 Efficiency4 (%) Inputoutput insulation 73 77 82 82 81 81 73 79 82 82 82 82 73 78 82 82 81 81 73 79 82 82 82 82 Withstand voltage AC.500V 1min Resistance DC.500V 50M min. 1 Total output voltage is including input, load, and temperature regulation. When the condition is 2-output, it is the balance load (balance load means the condition when the load current of +output and -output is equal). 3 Measurement bandwidth: 50MHz 4 Typical input voltage, maximum output current. 5 2-output products may be used as 24 to 30V single output with COM. terminal open. 6 TRM and -Vout are shorted. * Trim range: 3.3Vout is 3.15 to 3.67V, 5Vout is 4.75 to 6V, 12Vout is 11.4 to 15V, 12Vout is 11.4 to 15V. 2 OUTPUT POWER - AMBIENT TEMPERATURE(DERATING) COMMON SPECIFICATIONS Overcurrent protection Output power(%) 100 b a 80 Natural cooling 60 40 20 Operating temperature range Storage temperature range Humidity range a: 0.5m/s(100LFM) b: 1m/s(200LFM) 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Ambient temperature(C) Amplitude Vibration Withstand voltage Eac Insulation resistance Safety standards Weight Output current limitation system, auto recovery type -40 to +85C[Derating is necessary when operating environment temperature exceed 50C] -40 to +85C 95(%)RH max. [Maximum wet-bulb temperature: 38C] 10 to 55Hz, all amplitude 1.52mm, sweep time 15min[3 directions of X, Y, Z, each 2h] 980m/s2(100G) 6ms[6 directions, each 3 times] Input to output, input to case, output to case: 500V, 1min Input to output, input to case, output to case: 50M min.[DC.500V] UL60950-1, C-UL(CSA22.2 No.60950-1), EN60950-1 certified is applying partially. 7.0g * All specifications are subject to change without notice. 002-05 / 20061129 / ea335_cc_e.fm (6/21) CC3 Type(DIP, SMD Types) SHAPES AND DIMENSIONS CC3-xxxxxF-E (DIP TYPE) RECOMMENDED PWB HOLE SIZE, LOCATION [TOP VIEW] 16.60.2 2.92 2.54 5.08 2.54 17.78 Shape 7.62 13.08 3.5 t=0.3 10.16 8.5max. 4.0 20.32 7-o1.0(Land diameter o2.0) 22.86 2.54 17.78 2.7 a 2-o1.5(Land diameter o2.5) 0.5 2.54 5 7-0.3x0.6 6 7 b 2.7 Dimensions in mm Tolerance: 0.5 a CC3-xxxxxR-E (SMD TYPE) RECOMMENDED PWB HOLE SIZE, LOCATION [TOP VIEW] 2.54 5.08 2.54 Coplanarity 0.1max. Shape 1.2 22.86 (13.38) t=0.3 10.16 8.8max. 4.0 (3.22) 16.60.2 7.62 b 1.0 0.5 4 7.62 3 2 1 (3.22) 3.5 b 2.54 5.08 2.54 2.54 (3.22) 22.86 a 26.16 1.8 3.2 1.8 22.0 3.2 4 2 5 7-0.3x0.6 6 1 7 Dimensions in mm Tolerance: 0.5 CONNECTIONS CC3-xxxxSx-E 7 6 5 RC +Vout TRM -Vout 2 -Vin 3 4 NC TERMINAL PIN CONFIGUTATION No.1 No.2 No.3 No.4 No.5 No.6 No.7 +Vin RC -Vin NC -Vout TRM +Vout +Vin 1 7 6 5 RC +Vout TRM COM 2 -Vin 3 4 -Vout Load 1 Load +Vin CC3-xxxxDx-E Load (3.22) 2.54 5.08 2.54 3 7.62 2.54 (3.22) 28.4 TERMINAL PIN CONFIGUTATION No.1 No.2 No.3 No.4 No.5 No.6 No.7 +Vin RC -Vin -Vout Common out TRM +Vout * All specifications are subject to change without notice. 002-05 / 20061129 / ea335_cc_e.fm (7/21) CC3 Type(SIP Type) SHAPES AND DIMENSIONS CC3-xxxxxS-E (SIP TYPE) 17.9 9.2 (0.5) 3.5 (0.5) 4.1 2.47 P P P P 2P P P P P 22.86 1(t=0.3) 2.47 6 17.78 P=2.54 5.01 a a 1 2 3 4 5 7 8 0.5 27.8 9 10 RECOMMENDED PWB HOLE SIZE, LOCATION [TOP VIEW] 9.2 4 27.8 2.47 SMD location 22.86 2.47 17.78 2-o1.5(Land diameter o2.5) P P P P 2P P P P 6.0 Dimensions in mm Tolerance: 0.5 9.2 P=2.54 9-o0.8(Land diameter o2.0) Load +Vin +Vout NC NC -Vout TRM NC -Vin -Vin +Vin +Vin +Vin No.1 No.2 No.3 No.4 No.5 No.6 No.7 No.8 No.9 No.10 -Vin 10 -Vin 9 TRM 8 -Vout 7 COM +Vin 5 COM +Vin 4 TERMINAL PIN CONFIGUTATION +Vout -Vin 3 -Vin 2 TRM 1 CC3-xxxxDS-E -Vout +Vout CONNECTIONS CC3-xxxxSS-E 1 2 3 4 5 7 8 9 10 Load Load TERMINAL PIN CONFIGUTATION No.1 No.2 No.3 No.4 No.5 No.6 No.7 No.8 No.9 No.10 +Vout COM COM -Vout TRM NC -Vin -Vin +Vin +Vin The output voltage can be set to 15V, 15V, by connecting the output variable terminal TRM of the 12Vout, 12V output model to -Vout. 24V single output is possible by opening the 12Vout COM terminal and connecting the load to +Vout, -Vout. Also, 30V single output is possible when connecting the TRM terminal with -Vout under the same conditions. * All specifications are subject to change without notice. 002-05 / 20061129 / ea335_cc_e.fm (8/21) CC6 Type ELECTRICAL CHARACTERISTICS Part No. CC6-0503Sx1-E CC6-0505Sx-E CC6-0512Sx-E CC6-0512Dx-E6 CC6-1203Sx-E CC6-1205Sx-E CC6-1212Sx-E CC6-1212Dx-E6 CC6-2403Sx-E CC6-2405Sx-E CC6-2412Sx-E CC6-2412Dx-E6 CC6-4803Sx-E CC6-4805Sx-E CC6-4812Sx-E CC6-4812Dx-E6 Input voltage (V) Output voltage2 (V) Output current (mA) 4.5 to 9 4.5 to 9 4.5 to 9 4.5 to 9 4.5 to 9 4.5 to 9 9 to 18 9 to 18 9 to 18 9 to 18 9 to 18 9 to 18 18 to 36 18 to 36 18 to 36 18 to 36 18 to 36 18 to 36 36 to 76 36 to 76 36 to 76 36 to 76 36 to 76 36 to 76 3.33% 53% 123% 153%7 125% 155%7 3.33% 53% 123% 153%7 125% 155%7 3.33% 53% 123% 153%7 125% 155%7 3.33% 53% 123% 153%7 125% 155%7 0 to 1200 0 to 1000 0 to 500 0 to 400 0 to 250 0 to 200 0 to 1200 0 to 1200 0 to 500 0 to 400 0 to 250 0 to 200 0 to 1200 0 to 1200 0 to 500 0 to 400 0 to 250 0 to 200 0 to 1200 0 to 1200 0 to 500 0 to 400 0 to 250 0 to 200 Voltage stability Load3 Input Temperature (mV)max. (mV)max. (mV)max. 20 20 40 40 80 80 20 20 40 40 80 80 20 20 40 40 80 80 20 20 40 40 80 80 40 40 100 100 600 600 40 40 100 100 600 600 40 40 100 100 600 600 40 40 100 100 600 600 80 80 200 200 300 300 80 80 200 200 300 300 80 80 200 200 300 300 80 80 200 200 300 300 Output ripple noise voltage4 (mVp-p) typ./max. 40/120 40/120 30/120 30/120 30/120 30/120 40/120 40/120 30/120 30/120 30/120 30/120 40/120 40/120 30/120 30/120 30/120 30/120 40/120 40/120 30/120 30/120 30/120 30/120 Efficiency5 (%) Inputoutput insulation 76 79 82 82 82 82 78 82 85 85 85 85 77 81 87 87 86 86 77 81 86 86 86 86 Withstand voltage AC.500V 1min Resistance DC.500V 50M min. 1 An "x" within the product name is to be replaced by the symbol representing the terminal structure (F: DIP / R: SMD). Total output voltage is including input, load, and temperature regulation. 3 When the condition is 2-output, it is the balance load (balance load means the condition when the load current of +output and -output is equal). 4 Measurement bandwidth: 50MHz 5 Typical input voltage, maximum output current 6 2-output products may be used as 24 to 30V single output with COM. terminal open. 7 TRM and -Vout are shorted. * Trim range: 3.3Vout is 3.15 to 3.6V, 5Vout is 4.75 to 6V, 12Vout is 11.4 to 15V, 12Vout is 11.4 to 15V. 2 OUTPUT POWER - AMBIENT TEMPERATURE(DERATING) COMMON SPECIFICATIONS Overcurrent protection Output power(%) 100 b a 80 Natural cooling 60 40 20 Operating temperature range Storage temperature range Humidity range a: 0.5m/s(100LFM) b: 1m/s(200LFM) 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Ambient temperature(C) Amplitude Vibration Withstand voltage Eac Insulation resistance Safety standards Weight Output current limitation system, auto recovery type -40 to +85C[Derating is necessary when operating environment temperature exceed 50C] -40 to +85C 95(%)RH max. [Maximum wet-bulb temperature: 38C] 10 to 55Hz, all amplitude 1.52mm, sweep time 15min[3 directions of X, Y, Z, each 2h] 980m/s2(100G) 6ms[6 directions, each 3 times] Input to output, input to case, output to case: 500V, 1min Input to output, input to case, output to case: 50M min.[DC.500V] UL60950-1, C-UL(CSA22.2 No.60950-1), EN60950-1 certified 5.8g * All specifications are subject to change without notice. 002-05 / 20061129 / ea335_cc_e.fm (9/21) CC6 Type SHAPES AND DIMENSIONS CC6-xxxxxF-E (DIP TYPE) RECOMMENDED PWB HOLE SIZE, LOCATION [TOP VIEW] 2.7 a b 3 5.08 7-0.3x0.6 a 5 5.08 5.08 6 (2.93) 1 Dimensions in mm Tolerance: 0.5 7 b a CC6-xxxxxR-E (SMD TYPE) RECOMMENDED PWB HOLE SIZE, LOCATION [TOP VIEW] 8.8max. 4.0 (2.93) 21.10.2 5.08 Shape 3 4 3.2 5.08 7-0.3x0.6 5.08 5.08 1.8 1.2 1.8 10.16 Coplanarity 0.1max. 15.24 22.86 (18.17) t=0.3 26.16 22.0 3.2 28.4 5 10.16 5.08 2 5.08 6 1 7 Dimensions in mm Tolerance: 0.5 CONNECTIONS CC6-xxxxSx-E 7 6 5 RC +Vout TRM -Vout 2 -Vin 3 4 NC TERMINAL PIN CONFIGUTATION No.1 No.2 No.3 No.4 No.5 No.6 No.7 +Vin RC -Vin NC -Vout TRM +Vout +Vin 1 7 6 5 RC +Vout TRM COM 2 -Vin 3 4 -Vout Load 1 Load +Vin CC6-xxxxDx-E Load 5.08 (2.93) 5.08 2.7 5.08 10.16 22.86 1.0 4 2 2-o1.5(Land diameter o2.5) 3.5 2.54 0.5 5.08 (2.93) 2.54 5.08 b 7-o1.0(Land diameter o2.0) 0.5 22.86 15.24 17.87 t=0.3 10.16 3.5 Shape 17.78 (2.93) 20.32 2.63 4.0 8.5max. 21.10.2 TERMINAL PIN CONFIGUTATION No.1 No.2 No.3 No.4 No.5 No.6 No.7 +Vin RC -Vin -Vout Common out TRM +Vout * All specifications are subject to change without notice. 002-05 / 20061129 / ea335_cc_e.fm (10/21) CC10 Type ELECTRICAL CHARACTERISTICS Part No. CC10-0503Sx1-E CC10-0505Sx-E CC10-0512Sx-E CC10-0512Dx-E6 CC10-1203Sx-E CC10-1205Sx-E CC10-1212Sx-E CC10-1212Dx-E6 CC10-2403Sx-E CC10-2405Sx-E CC10-2412Sx-E CC10-2412Dx-E6 CC10-4803Sx-E CC10-4805Sx-E CC10-4812Sx-E CC10-4812Dx-E6 Input voltage (V) Output voltage2 (V) Output current (mA) 4.5 to 9 4.5 to 9 4.5 to 9 4.5 to 9 4.5 to 9 4.5 to 9 9 to 18 9 to 18 9 to 18 9 to 18 9 to 18 9 to 18 18 to 36 18 to 36 18 to 36 18 to 36 18 to 36 18 to 36 36 to 76 36 to 76 36 to 76 36 to 76 36 to 76 36 to 76 3.33% 53% 123% 153%7 125% 155%7 3.33% 53% 123% 153%7 125% 155%7 3.33% 53% 123% 153%7 125% 155%7 3.33% 53% 123% 153%7 125% 155%7 0 to 2500 0 to 2000 0 to 800 0 to 640 0 to 400 0 to 320 0 to 2500 0 to 2000 0 to 1000 0 to 800 0 to 450 0 to 360 0 to 2500 0 to 2000 0 to 1000 0 to 800 0 to 450 0 to 360 0 to 2500 0 to 2000 0 to 1000 0 to 800 0 to 450 0 to 360 Voltage stability Load3 Input Temperature (mV)max. (mV)max. (mV)max. 20 20 40 40 80 80 20 20 40 40 80 80 20 20 40 40 80 80 20 20 40 40 80 80 40 40 100 100 600 600 40 40 100 100 600 600 40 40 100 100 600 600 40 40 100 100 600 600 80 80 200 200 300 300 80 80 200 200 300 300 80 80 200 200 300 300 80 80 200 200 300 300 Output ripple noise voltage4 (mVp-p) typ./max. 40/120 40/120 30/120 30/120 30/120 30/120 40/120 40/120 30/120 30/120 30/120 30/120 40/120 40/120 30/120 30/120 30/120 30/120 40/120 40/120 30/120 30/120 30/120 30/120 Efficiency5 (%) Inputoutput insulation 84 84 84 84 83 83 84 86 88 88 86 86 84 86 87 87 86 86 84 86 88 88 86 86 Withstand voltage AC.500V 1min Resistance DC.500V 50M min. 1 An "x" within the product name is to be replaced by the symbol representing the terminal structure (F: DIP / R: SMD). Total output voltage is including input, load, and temperature regulation. 3 When the condition is 2-output, it is the balance load (balance load means the condition when the load current of +output and -output is equal). 4 Measurement bandwidth: 50MHz 5 Typical input voltage, maximum output current 6 2-output products may be used as 24 to 30V single output with COM. terminal open. 7 TRM and -Vout are shorted. * Trim range: 3.3Vout is 3.15 to 3.6V, 5Vout is 4.75 to 6V, 12Vout is 11.4 to 15V, 12Vout is 11.4 to 15V. 2 OUTPUT POWER - AMBIENT TEMPERATURE(DERATING) COMMON SPECIFICATIONS Overcurrent protection Output power(%) 100 b a 80 Natural cooling 60 40 20 Operating temperature range Storage temperature range Humidity range a: 0.5m/s(100LFM) b: 1m/s(200LFM) 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Ambient temperature(C) Amplitude Vibration Withstand voltage Eac Insulation resistance Safety standards Weight Output current limitation system, auto recovery type -40 to +85C[Derating is necessary when operating environment temperature exceed 50C] -40 to +85C 95(%)RH max. [Maximum wet-bulb temperature: 38C] 10 to 55Hz, all amplitude 1.52mm, sweep time 15min[3 directions of X, Y, Z, each 2h] 980m/s2(100G) 6ms[6 directions, each 3 times] Input to output, input to case, output to case: 500V, 1min Input to output, input to case, output to case: 50M min.[DC.500V] UL60950-1, C-UL(CSA22.2 No.60950-1), EN60950-1 certified 10.0g * All specifications are subject to change without notice. 002-05 / 20061129 / ea335_cc_e.fm (11/21) CC10 Type SHAPES AND DIMENSIONS CC10-xxxxxF-E (DIP TYPE) RECOMMENDED PWB HOLE SIZE, LOCATION [TOP VIEW] 8.5max. 22.60.2 5.08 b b a 7 35.56 1.0 Dimensions in mm Tolerance: 0.5 CC10-xxxxxR-E (SMD TYPE) RECOMMENDED PWB HOLE SIZE, LOCATION [TOP VIEW] 8.8max. 4.0 (3.68) 22.60.2 Coplanarity 0.1max. 38.86 Shape 1.8 4 2 5 6 7-0.3x0.6 7 1 Dimensions in mm Tolerance: 0.5 CC10-xxxxDx-E 6 5 RC +Vout TRM -Vout 2 -Vin 3 4 NC TERMINAL PIN CONFIGUTATION No.1 No.2 No.3 No.4 No.5 No.6 No.7 +Vin RC -Vin NC -Vout TRM +Vout +Vin 1 7 6 5 RC +Vout TRM COM 2 -Vin 3 4 -Vout Load 7 Load 1 3.2 41.0 CONNECTIONS CC10-xxxxSx-E +Vin 34.6 5.08 5.08 5.08 (3.68) 10.16 3.2 3 Load 5.08 (3.68) 1.8 15.24 35.56 (18.92) t=0.3 5.08 5.08 5.08 6 7-0.3x0.6 2.7 1.2 5 2-o1.5(Land diameter o2.5) 10.16 2 (3.68) 10.16 b 4 1 2.7 3.5 a 3 7-o1.0(Land diameter o2.0) 0.5 25.4 5.08 5.08 5.08 5.08 (3.68) 5.08 a Shape 5.08 5.08 5.08 35.56 0.5 25.4 15.24 18.62 3.5 t=0.3 10.16 3.38 4.0 30.48 TERMINAL PIN CONFIGUTATION No.1 No.2 No.3 No.4 No.5 No.6 No.7 +Vin RC -Vin -Vout Common out TRM +Vout * All specifications are subject to change without notice. 002-05 / 20061129 / ea335_cc_e.fm (12/21) CC15 Type ELECTRICAL CHARACTERISTICS Part No. Output voltage2 (V) CC15-2403Sx1-E 18 to 36 3.3/-3 to +5% 0 to 4500 40 120 CC15-2405Sx-E 18 to 36 5.0/-3 to +5% 0 to 3000 50 200 1 2 3 4 Output current (mA) Voltage stability Input voltage (V) Output ripple noise voltage3 (mVp-p) typ./max. Efficiency4 (%) 80 40/120 89 80 40/120 89 Input Load Temperature (mV)max. (mV)max. (mV)max. Inputoutput insulation Withstand voltage AC.500V 1min Resistance DC.500V 50M min. An "x" within the product name is to be replaced by the symbol representing the terminal structure (F: DIP / R: SMD). Total output voltage is including input, load, and temperature regulation. Measurement bandwidth: 50MHz Typical input voltage, maximum output current OUTPUT POWER - AMBIENT TEMPERATURE(DERATING) COMMON SPECIFICATIONS Overcurrent protection Output power(%) 100 b a 80 Natural cooling 60 40 20 Operating temperature range Storage temperature range Humidity range a: 0.5m/s(100LFM) b: 1m/s(200LFM) 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Ambient temperature(C) Amplitude Vibration Withstand voltage Eac Insulation resistance Safety standards Weight Output current limitation system, Output voltage shut-down type -40 to +85C[Derating is necessary when operating environment temperature exceed 50C] -40 to +85C 95(%)RH max. [Maximum wet-bulb temperature: 38C] 10 to 55Hz, all amplitude 1.52mm, sweep time 15min[3 directions of X, Y, Z, each 2h] 980m/s2(100G) 6ms[6 directions, each 3 times] Input to output, input to case, output to case: 500V, 1min Input to output, input to case, output to case: 50M min[DC.500V] UL60950-1, C-UL(CSA22.2 No.60950-1), EN60950-1 certified 12.5g * All specifications are subject to change without notice. 002-05 / 20061129 / ea335_cc_e.fm (13/21) CC15 Type SHAPES AND DIMENSIONS CC15-xxxxSF-E (DIP TYPE) 17-0.3x0.6 b 3.5 11 12 13 14 15 16 2.54 10 9 8 7 6 5 4 3 2 1 10.16 17-o1.0(Land diameter o2.0) 1.0 2-o1.5(Land diameter o2.5) b 6.075 2.7 31.475 17 a P P P P P 2.7 b 10.16 (4.62) 2.54 (4.62) a a 22.86 6.075 27.33 25.4 37.55 0.5 6.075 Shape 0.5 3.0 t=0.3 P P P P P P P P 4.47 RECOMMENDED PWB HOLE SIZE, LOCATION [TOP VIEW] 32.1 7.0max. 38.1 P=2.54 37.55 Dimensions in mm Tolerance: 0.5 (4.62) 17-0.3x0.6 18 22.86 11 12 13 14 15 16 20 27.33 21 10 9 8 7 6 5 4 3 2 1 2.54 22 Coplanarity 0.1max. 10.16 2.54 (4.62) 40.9 3.2 17 1.8 Shape 10.16 t=0.3 P P P P P 7.5max. 32.1 1.2 38.1 RECOMMENDED PWB HOLE SIZE, LOCATION [TOP VIEW] P P P P P P P P P 4.47 CC15-xxxxSR-E (SMD TYPE) 36.6 43.0 1.8 3.2 P=2.54 Dimensions in mm Tolerance: 0.5 CONNECTION +Vin -Vin 1 2 3 4 5 6 7 8 9 10 TERMINAL PIN CONFIGUTATION 17 16 15 14 13 12 11 -Vout Load RC +Vout No.1 No.2 No.3 No.4 No.5 No.6 No.7 No.8 No.9 NC NC RC NC NC +Vin +Vin -Vin -Vin No.10 No.11 No.12 No.13 No.14 No.15 No.16 No.17 NC NC +Vout +Vout +Vout -Vout -Vout NC * All specifications are subject to change without notice. 002-05 / 20061129 / ea335_cc_e.fm (14/21) CC25 Type ELECTRICAL CHARACTERISTICS Part No. Output voltage2 (V) CC25-2403Sx1-E 18 to 36 3.3/-3 to +5% 0 to 7500 40 120 CC25-2405Sx-E 18 to 36 5.0/-3 to +5% 0 to 5000 50 200 1 2 3 4 Output current (mA) Voltage stability Input voltage (V) Output ripple noise voltage3 (mVp-p) typ./max. Efficiency4 (%) 80 40/120 90 80 40/120 90 Input Load Temperature (mV)max. (mV)max. (mV)max. Inputoutput insulation Withstand voltage AC.500V 1min Resistance DC.500V 50M min. An "x" within the product name is to be replaced by the symbol representing the terminal structure (F: DIP / R: SMD). Total output voltage is including input, load, and temperature regulation. Measurement bandwidth: 50MHz Typical input voltage, maximum output current OUTPUT POWER - AMBIENT TEMPERATURE(DERATING) COMMON SPECIFICATIONS Overcurrent protection Output power(%) 100 b a 80 Natural cooling 60 40 20 Operating temperature range Storage temperature range Humidity range a: 0.5m/s(100LFM) b: 1m/s(200LFM) 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Ambient temperature(C) Amplitude Vibration Withstand voltage Eac Insulation resistance Safety standards Weight Output current limitation system, Output voltage shut-down type -40 to +85C[Derating is necessary when operating environment temperature exceed 50C] -40 to +85C 95(%)RH max. [Maximum wet-bulb temperature: 38C] 10 to 55Hz, all amplitude 1.52mm, sweep time 15min[3 directions of X, Y, Z, each 2h] 500m/s2(51G) 6ms[6 directions, each 3 times] Input to output, input to case, output to case: 500V, 1min Input to output, input to case, output to case: 50M min.[DC.500V] UL60950-1, C-UL(CSA22.2 No.60950-1), EN60950-1 certified 20.0g * All specifications are subject to change without notice. 002-05 / 20061129 / ea335_cc_e.fm (15/21) CC25 Type SHAPES AND DIMENSIONS CC25-xxxxSF-E (DIP TYPE) 43.2 RECOMMENDED PWB HOLE SIZE, LOCATION [TOP VIEW] t=0.3 Shape 6.075 6 5 4 3 2 1 40.08 0.5 3.5 25-o1.0(Land diameter o2.0) 1.0 PPP 9 8 7 25-0.3x0.6 0.5 14 15 16 17 18 19 20 21 22 23 24 (4.67) 13 12 11 10 2.7 b b a 2-o1.5 (Land diameter o2.5) 2.7 6.075 10.16 2.54 5.08 5.08 a 35.56 42.65 36.575 42.65 25 Dimensions in mm Tolerance: 0.5 CC25-xxxxSR-E (SMD TYPE) 43.2 P P P P P P P P P P 10.16 40.08 (4.67) 5.08 PP 41.7 3.2 48.1 3.2 P=2.54 25 Dimensions in mm Tolerance: 0.5 (4.67) 6 5 4 3 2 1 PPP 9 8 7 14 15 16 17 18 19 20 21 22 23 24 35.56 1.8 10.16 5.08 5.08 PPPPP Coplanarity 0.1max. 1.8 5.08 4.52 7.5max. Shape 46.0 2.54 RECOMMENDED PWB HOLE SIZE, LOCATION [TOP VIEW] 44.9 t=0.3 13 12 11 10 P=2.54 a (4.67) b P P P P P P P P P P 10.16 30.5 5.08 PPPPP 6.075 5.08 PP 3.0 7.0max. 4.52 44.9 CONNECTION 25 24 23 22 21 20 19 18 17 16 15 14 TERMINAL PIN CONFIGUTATION -Vout Load 1 2 RC 3 4 5 -Vin 6 7 8 9 10 11 12 +Vin 13 +Vout No.1 No.2 No.3 No.4 No.5 No.6 No.7 No.8 No.9 NC NC NC RC NC NC -Vin -Vin -Vin No.10 No.11 No.12 No.13 No.14 No.15 No.16 No.17 No.18 +Vin +Vin +Vin NC NC +Vout +Vout +Vout +Vout No.19 No.20 No.21 No.22 No.23 No.24 No.25 -Vout -Vout -Vout -Vout -Vout -Vout NC * All specifications are subject to change without notice. 002-05 / 20061129 / ea335_cc_e.fm (16/21) Control Functions/Connections RC -Vin -Vout If not using this function (always ON), short-circuit the RC terminal and the -Vin terminal. RC -Vin Fig. 1 1 1 2 Fig.1 3.3V 5V 12V +Vout +Vout Load When not used (Always ON) Connected with -Vout 3.6V 6.0V 15V 15V To be replaced by 1R5(1.5W), 3(3W), 6(6W) and 10(10W). +Vin +Vin Open 3.3V 5.0V 12V 12V TRM -Vin +Vin 3.6V 6V 15V +Vout Load RC control signal DIP/SMD Models Part No. CCx -xx03Sx CCx-xx05Sx CCx-xx12Sx CCx-xx12Dx +Vout Load +Vin OUTPUT VARIABLE TERMINAL(TRM) (1.5 to 10W Types) The output voltage can be set to the value shown in the following table by connecting the TRM terminal with the -Vout terminal. Please open the TRM terminal when not using this function. Please take note that it is necessary to derate the output current to match the maximum power when the output voltage is set higher by this function. Load REMOTE CONTROL TERMINAL(RC) (DIP/SMD MODELS) 1.5 to 10W Types It is recommended to use an open collector as the control method for the remote control terminal. If other methods are necessary, please contact TDK first. In addition, please use a transistor with VCE: Over Vin and Ic: Over 1mA. When the RC terminal is open, the output is OFF, and when the RC terminal and -Vin are shorted (0 to 0.4V) the output is ON. TRM -Vout -Vin -Vout -Vout Fig.2 15 and 25W Types When the RC terminal is open, the output is ON, and when the RC terminal is HIGH (connected to +Vin) the output is OFF. +Vin +12V +Vout +Vin Load TRM +15V +Vout Load TRM COM COM Load RC control signal -Vin +Vout Load +Vin RC -Vin -12V Load -Vin -Vout -15V SIP Model -Vout If not using this function (always ON), short-circuit the RC terminal and the -Vin terminal. +Vin -Vout Part No. CC3-xx03SS-E CC3-xx05SS-E CC3-xx12SS-E CC3-xx12DS-E Open 3.3V 5V 12V 12V Connected with -Vout 3.67V 6V 15V 15V Fig. 3 3 3 4 +Vout -Vin +Vin -Vin TRM -Vout +Vout +Vin -Vin TRM -Vout RC +Vout When not used (Always ON) Load Fig.3 -Vout Load Load 3.3V, 5V, 12V 3.67V, 6V, 15V Load +12V Load Load -12V +15V +Vin -Vin TRM -Vout COM +Vout +Vin -Vin TRM -Vout COM +Vout Fig.4 Load -15V * All specifications are subject to change without notice. 002-05 / 20061129 / ea335_cc_e.fm (17/21) Control Functions/Connections With the 12V, 24V single output is possible by opening the COM terminal and TRM terminal. Also, 30V single output is possible when opening the COM terminal and connecting the TRM terminal with the -Vout terminal. DIP/SMD Models Part No. COM terminal Open CCx -xx12Dx-E Single output 24V Fig. 5 30V 6 To be replaced by 1R5(1.5W), 3(3W), 6(6W) and 10(10W). Fig.5 DIP/SMD Models Fig.6 +Vin +Vin +Vout 30V TRM Load TRM COM -Vin Part No. +Vout 24V COM -Vin -Vout CCx -xx03Sx-E Load Open TRM terminal Open Connected with -Vout OUTPUT VARIABILITY FUNCTION (ADDING EXTERNAL RESISTANCE) (1.5 to 10W Types) The output voltage can be adjusted within the range shown in the following table by connecting resistance (Ra, Rb) between the TRM terminal and the -Vout terminal, or between the TRM terminal and the +Vout terminal. Please take note that it is necessary to derate the output current to match the maximum power when the output voltage is setted higher. CCx-xx05Sx-E CCx-xx12Sx-E CCx-xx12Dx-E -Vout SIP Model Part No. COM terminal Open CC3-xx12DS-E Open Single output 24V Fig. 7 30V 8 +Vin -Vin TRM -Vout COM +Vout +Vin -Vin TRM -Vout Fig.8 COM +Vout Fig.7 TRM terminal Open Connected with -Vout 24V Load 30V Connecting +Vout with Rb 3.15 to 3.3V5 4.75 to 5V6 11.4 to 12V7 11.4 to 12V8 Fig. 9 9 9 11 Fig. 10 10 10 12 To be replaced by 1R5(1.5W), 3(3W), 6(6W) and 10(10W). Calculate the output voltage Vout(V) from the connected resistance Ra, Rb(k) Set the output voltage higher by adding resistance Ra between the TRM terminal/-Vout terminal. 1 Vout=3.3+9.59/(32+Ra) 2 Vout=5.01+17.64/(17.8+Ra) 3 Vout=12.01+50.53/(16.9+Ra) 4 Vout=12.02+53.55/(18+Ra) Set the output voltage lower by adding resistance Rb between the TRM terminal/+Vout terminal. 5 Load Connecting -Vout with Ra 3.3 to 3.6V1 5 to 6V2 12 to 15V3 12 to 15V4 6 Vout=3.3-15.53/(39.6+Rb) [Rb 62] Vout=5.01-52.55/(31.8+Rb) [Rb 160] 7 Vout=12.01-431.1/(57+Rb) [Rb 8 Vout=12.02-968.5/(103+Rb) [Rb 620] 1500] Calculate the connected resistance Ra and Rb(k) from the set output voltage Vout(V). Set the output voltage higher by adding resistance Ra between the TRM terminal/-Vout terminal. 1 Ra=9.59/(Vout-3.3)-32 2 Ra=17.64/(Vout-5.01)-17.8 3 Ra=50.53/(Vout-12.01)-16.9 4 Ra=53.55/(Vout-12.02)-18 Set the output voltage lower by adding resistance Rb between the TRM terminal/+Vout terminal. 5 Rb=15.53/(3.3-Vout)-39.6 6 Rb=52.55/(5.01-Vout)-31.8 7 Rb=431.1/(12.01-Vout)-57 8 Rb=968.5/(12.02-Vout)-103 Fig.10 3.3 to 3.6V 5 to 6V 12 to 15V TRM 3.15 to 3.3V 4.75 to 5V 11.4 to 12V +Vout Rb Load +Vout TRM Ra -Vout Load Fig.9 -Vout Fig.11 Fig.12 +12 to +15V +Vout Load TRM COM -Vout +Vout TRM +11.4 to +12V Rb Load COM Ra Load -12 to -15V Load -Vout -11.4 to -12V * All specifications are subject to change without notice. 002-05 / 20061129 / ea335_cc_e.fm (18/21) Control Functions/Connections SIP Model Part No. CC3-xx03SS-E CC3-xx05SS-E CC3-xx12SS-E CC3-xx12DS-E Connecting -Vout with Ra 3.3 to 3.67V1 5 to 6V2 12 to 15V3 12 to 15V4 Connecting +Vout with Rb 3.15 to 3.3V5 4.75 to 5V6 11.4 to 12V7 11.4 to 12V8 Fig. 13 13 13 15 Fig. 14 14 14 16 Calculate the output voltage Vout(V) from the connected resistance Ra, Rb(k) Set the output voltage higher by adding resistance Ra between the TRM terminal/-Vout terminal. 1 Vout=3.3+1.04/(2.83+Ra) 2 Vout=5+12.75/(12.69+Ra) 3 Vout=12+48.4/(16.18+Ra) 4 Vout=12+54.7/(18+Ra) Set the output voltage lower by adding resistance Rb between the TRM terminal/+Vout terminal. 5 Vout=3.3-1.69/(3.66+Rb) [Rb 7.6] 6 Vout=5-12.78/(17.79+Rb) [Rb 33.3] 7 Vout=12-184.1/(35.54+Rb) [Rb 271.3] 8 Vout=12-470.3/(61.75+Rb) [Rb 722.1] Calculate the connected resistance Ra and Rb(k) from the set output voltage Vout(V). Set the output voltage higher by adding resistance Ra between the TRM terminal/-Vout terminal. 1 Ra=1.04/(Vout-3.3)-2.83 2 Ra=12.75/(Vout-5)-12.69 3 Ra=48.4/(Vout-12)-16.18 4 Ra=54.7/(Vout-12)-18 Set the output voltage lower by adding resistance Rb between the TRM terminal/+Vout terminal. 5 Rb=1.69/(3.3-Vout)-3.66 6 Rb=12.78/(5-Vout)-17.79 7 Rb=184.1/(12-Vout)-35.54 8 Rb=470.3/(12-Vout)-61.75 Ra Load 3.3 to 3.67V, 5 to 6V, 12 to 15V TRM -Vout TRM -Vout +Vout Fig.14 +Vout Fig.13 Rb Load 3.15 to 3.3V, 4.75 to 5V, 11.4 to 12V Ra Load Load +12 to +15V -12 to -15V TRM -Vout COM +Vout TRM -Vout Fig.16 COM +Vout Fig.15 Rb Load Load +11.4 to +12V -11.4 to -12V * All specifications are subject to change without notice. 002-05 / 20061129 / ea335_cc_e.fm (19/21) Noise Reduction Measurement 10mm +Vin Vout V -Vin -Vout +Vin +Vout -Vin -Vout Load +Vout When the distance between the converter output and the load is great, connect the capacitor to the root portion of the load. To reduce output spike noise, connect a ceramic capacitor with 0 to 1F to the output portion of the converter. +Vout V +Vin 20mm Load Vin OUTPUT RIPPLE NOISE In order to reduce output ripple noise, connect the capacitor to the output portion of the converter. Output ripple noise can be reduced even further when a type filter is used as shown in the following diagram. If such a filter is used, please use a coil upto 100H. Load REDUCING RIPPLE NOISE If ripple noise from the converter is not measured, the results may differ greatly depending on the measurement method. Therefore, when measuring ripple noise, be sure to measure the noise from the root part of the output terminal and not to make a loop so that magnetic flux is not collected when connecting the probe. Please keep in mind that spike voltage may vary greatly depending on the ripple voltmeter and the frequency range of the oscilloscope. TDK measures noise using the following wiring at a frequency range of 50MHz. 0.1F -Vout 50 coaxial cable (1.5m) -Vin A Oscilloscope (50MHz) or +Vin Ripple volt meter (50MHz) 1F Termination: 50+0.1F -Vin INPUT RIPPLE NOISE This series contains a capacitor at the input location. Therefore, it is possible to be operated without connecting an external capacitor for the input. However, if a capacitor is connected, it is possible to reduce input ripple noise and input return noise. Input ripple noise can be reduced even further when a type filter is used as shown in the following diagram. -Vin -Vout +Vin +Vout -Vin -Vout Load +Vout Load +Vin When the distance between the input power source and the input location of the converter is great, install a capacitor near an input terminal as much as possible. +Vout -Vin -Vout Load +Vin +Vout Load Iin -Vout OUTPUT EXTERNAL CAPACITANCE RANGES Please keep in mind that if the capacitor installed at the output location has a larger capacity than shown in the following value, or if capacitors with low impedance are connected parallel much, converter operation may be unstable. Part No. CC1R5-xx03Sx-E CC1R5-xx05Sx-E CC1R5-xx12Sx-E CC1R5-xx12Dx-E CC3-xx03Sx-E CC3-xx05Sx-E CC3-xx12Sx-E CC3-xx12Dx-E CC6-xx03Sx-E CC6-xx05Sx-E CC6-xx12Sx-E CC6-xx12Dx-E CC10-xx03Sx-E CC10-xx05Sx-E CC10-xx12Sx-E CC10-xx12Dx-E CC15-24xxSx-E CC25-24xxSx-E Capacitance(F)max. 100 100 47 22 220 220 100 47 470 470 220 100 470 470 220 100 470 470 When the distance between the input power source and the input location of the converter is great, the impedance of the input line becomes high and spike noise may also increase. Therefore, in such cases, it is recommended to connect the capacitor as close to the input location of the DC to DC converter as possible. * All specifications are subject to change without notice. 002-05 / 20061129 / ea335_cc_e.fm (20/21) Noise Reduction Measurement/Protection/Connections -Vin -Vout 10W-product contains capacitors with 1,000pF connected between the first and second. RADIATION NOISE It is possible to reduce the converter's radiation noise by connecting a case terminal(SMD model has not a case terminal.) to the input or output GND. However, efficiency will be different depending on the equipment being used. Therefore, confirm this by using your actual equipment. In addition, please wire the bottom of the converter to the GND line and wire using a wide surface. OVERCURRENT PROTECTION 1.5 to 10W Types This series is equipped with an overcurrent protection circuit. This means that when the output current begins to flow over the starting point of the overcurrent, the output voltage becomes lower. The output voltage is recovered automatically by releasing the overcurrent and short circulation status. However, please keep in mind that if the overcurrent status continues for over 30 seconds, internal elements of the converter will deteriorate or be damaged. The start point of the overcurrent is never lower than the rated current. If auto recovery is not executed when the overcurrent status is released for some reason, please restart it after turning the electrical power or the remote OFF one time. 15 to 25W Types This series is recovery with an overcurrent protection circuit. This means that when the output current begins to flow over the rated current, the output voltage falls, and a converter steps a latch. If the overcurrent and the short circuit are released, the output voltage can not be recovered automatically. Please restart the power source to recover the output voltage. The start point of the overcurrent is never lower than the rated current. LOW INPUT VOLTAGE PROTECTION This series is equipped with low voltage input protection in order to prevent errors caused by low input voltage. This means that the converter stops operating when the voltage is below the specified voltage. The following chart shows the specified range. Part No. Input voltage range CCx -05xxxx-E CCx-12xxxx-E CCx-24xxxx-E CCx-48xxxx-E CC15-24xxSx-E CC25-24xxSx-E 4.5 to 9V 9 to 18V 18 to 36V 36 to 76V 18 to 36V 18 to 36V Specified voltage range for protection circuit 3 to 4.5V 6 to 9V 13 to 18V 27 to 36V 12 to 18V 12 to 18V To be replaced by 1R5(1.5W), 3(3W), 6(6W) and 10(10W). WITHSTAND VOLTAGE The withstand voltage between the input and output, and between the terminal and the casing is AC.500V. SERIES AND PARALLEL CONNECTIONS SERIES CONNECTION It is possible to have a series connection by using the wiring shown in the following diagram on the left. However, if the output voltage does not begin with this connection, connect the schottky barrier diode, which has low forward voltage, as shown in the following diagram on the right. In this case, be sure to use a schottky barrier diode that has a forward current larger than the converter's rated current and that has a reverse withstand voltage at least two times larger than the voltage between the +Vout and -Vout. Also, make sure that the output current is below the rated current of the smaller converter. +Vin +Vout +Vin +Vout -Vin -Vout -Vin -Vout +Vin +Vout +Vin +Vout -Vin -Vout -Vin -Vout Load +Vout Load +Vin OVERVOLTAGE PROTECTION This series is not equipped with an overvoltage protection function. Please keep in mind that if overvoltage is impressed externally over the rated voltage, it may cause damage. Load COMMON MODE NOISE Products with under 10W contain capacitors that are not connected between the first and second. Therefore, in order to reduce common mode noise, please connect a capacitor with about 1,000pF between the first and second GND as shown in the following diagram. Also, please keep in mind that if the connected capacitor is too large, the coupling capacitance between the input and output will become too high. Be sure to also keep in mind the capacitor's withstand voltage (over 500V is recommended based on insulation withstand voltage). PARALLEL CONNECTION It is not possible to have a parallel connection for increasing currents. * All specifications are subject to change without notice. 002-05 / 20061129 / ea335_cc_e.fm (21/21) Soldering Conditions/Cleaning Conditions SOLDERING CONDITIONS DIP and SIP Models Make sure to perform soldering to the PC board under the following conditions. Soldering DIP Soldering iron 260C, for 10 seconds max. 380C, for 3 seconds max. SMD Model Lead-free solder/high-temperature reflow process Component surface temperature 3020s 245C max. 225C min. 180C 150C 1 to 3C/s 40 to 100s 1 to 4C/s 1 to 5C/s CLEANING CONDITIONS It is recommended that the PC board should not be cleaned after soldering. It, however, has already been checked that there is no problem as a result of the following cleaning agents and test conditions. When cleaning with one of the following cleaning agents, it should be used under these conditions. When using cleaning agent other than the following, please consult TDK before use. Cleaning Agents and Test Conditions Clean Through 750H (1) Cleaning (Agitation) 60C/4min (2) Rinsing (Agitation, water) 60C/4min (3) Rinsing (Agitation, water) Room temperature to 40C/4min (4) Drying 70C/6min Pine Alpha ST100S (1) Cleaning (Agitation) 60C/5min (2) Rinsing (Agitation, water) 30C/10min (3) Drying 70C/6min Terpene Cleaner EC-7R (1) Cleaning (Agitation) 60C/5min (2) Rinsing (Agitation, IPA) 30C/10min (3) Drying 70C/6min Isopropyl Alcohol (1) Ultrasonic cleaning 60C/1min (2) Cooling bath cleaning R.T./1min (3) Vapor cleaning 83C/1min Asahi Clean AK225AES (1) Ultrasonic cleaning 50C/2min (2) Cooling bath cleaning R.T./2min * All specifications are subject to change without notice. 002-05 / 20061129 / ea335_cc_e.fm