PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER 32.768 KHz NOMINAL FREQUENCY PRODUCT TYPE G2 Series Cylinder Through Hole Quartz Crystal SPEC. NO. ( P/N ) G23270023 CUSTOMER P/N 0 Nov.6,2015 ISSUE DATE A VERSION APPROVED PREPARED QA AVL Status APPROVED BY CUSTOMER Please return one copy with approval to PSE-TW PSE Technology Corporation No.2, Tzu-Chiang 5th Rd, Chung Li Industrial Park, Chung Li City, Taoyuan County, Taiwan (R.O.C.) TEL: 886-3-451-8888 FAX: 886-3-461-3865 http://www.saronix-ecera.com.tw E0-R-4-014 Rev. E *RoHS Exception *HF-Halogen Free *REACH Compliant Page i G2 Series 2.0x6.0mm Cylinder Through Hole Quartz Crystal G23270023 VER. A 4-Feb-10 VERSION HISTORY Version No. Version Date A Nov.6,2015 E0-R-4-014 Rev. E Customer Receipt Date Supplier Receipt Date Description Notes Initial Release Page ii G2 Series 2.0x6.0mm Cylinder Through Hole Quartz Crystal G23270023 VER. A 4-Feb-10 ELECTRICAL SPECIFICATIONS SRe Part Number : G23270023 Parameters Symbol Specifications Units Nominal Frequency Fn 32.768 KHz Mode of Oscillation MO Fundamental Drive Level DL 1 W Max. Load Capacitance CL 12.5 pF Typical Frequency Tolerance FT 20 ppm Operating Temperature Range TR -10 to +60 C Equivalent Series Resistance ESR 35 K Max. C0 1.5 pF Typical K -0.04 Shunt Capacitance C0 Temperature Coefficient Notes +2o X-Cut at 25 5 ppm/C2 Max. Aging 3 ppm Max 1st year Insulation Resistance 500 M at DC 100V 15V Reliability ( Mechanical and Environmental Endurance ) No. 1 Test Items Vibration Test Method and Condition Requirements (1) Vibration Frequency: 10 to 55Hz Frequency Change: 10ppm Max. (2) Vibration Amplitude: 1.5mm Resistance Change:5kohm Max. (3) Cycle Time: 1-2min(10-55-10Hz) (4) Direction: X.Y.Z (5) Duration: 2h/each direction 2 3 Shock Leakage 3 Times free drop from 75cm height to hard wooden Frequency Change: 10ppm Max. board of thickness more than 30mm Resistance Change:5kohm Max. Put crystal units into a hermetic container and Leakage: 1x108Pa*m1/s Max. Helium for 0.5-0.6Mpa, and keep it for 1h; Check the leakage by a Helium leak detector E0-R-4-014 Rev. E Page 1 G2 Series 2.0x6.0mm Cylinder Through Hole Quartz Crystal G23270023 4 Lead Strength The crystal lead with the 0.9kg(9N) power (keep it for (DIP) 30s5s) and bend the crystal lead 90 with 0.45kg VER. A 4-Feb-10 The crystal lead is not abnormity power and two times 5 High Temperature The crystal units shall be put in somewhere for 2 hrs Endurance Frequency Change: 10ppm Max. at temperature of 852, then keep it for 1 to 2 hrs Resistance Change:5kohm Max. under room temperature. 6 Low Temperature The crystal units shall be put in somewhere for 2 hrs Endurance at temperature of -25, then keep it for 1 to 2 hrs under room temperature. 7 Humidity The crystal units shall be put in somewhere at 40 Endurance in relative humidity of 90-95% for 48 hrs, then keep it for one or two hours under room temperature. 8 Temperature Temperature shift from low(-40) to high(100, keep Cycle 30 mins), satisfy high(100) to low(-40, keep 30 mins), then go up to room temperature for 5 cycles. 10 Salt Spray Test Put the crystal units in the salt spray room (salt The appearance shall has no abnormity density: 5%) at the temperature of 35 for 96 hrs. and soldering is good. Then clean it with water and dry its surface. Frequency Change: 10ppm Max. R i t Ch 5k h M Resistance Change:5kohm Max. E0-R-4-014 Rev. E Page 2 G2 Series 2.0x6.0mm Cylinder Through Hole Quartz Crystal G23270023 VER. A 4-Feb-10 MARKING eBEmv DIMENSIONS E0-R-4-014 Rev. E Date & Factory Code m v Date Code Factory Code (Unit:mm) Page 3 G2 Series 2.0x6.0mm Cylinder Through Hole Quartz Crystal G23270023 VER. A 4-Feb-10 PACKING Quantity for Each Bag : 1000 pcs Storeroom Label Deliver Packing Carton (L25.5*W25.5*H18) Green Qualified Label E0-R-4-014 Rev. E Page 4