CUSTOMER
NOMINAL FREQUENCY
PRODUCT TYPE
SPEC. NO. ( P/N )
CUSTOMER P/N
ISSUE DATE
G2 Series Cylinder T hrough Hole Quartz Crystal
G23270023
0
PSE Technology Corporation
SPECIFICATION FOR APPROVAL
Nov.6,2015
32.768 KHz
VERSION
PSE Technology Corporation
*RoHS Exce
p
tion
*HF-Halogen Free
*REACH Compliant
APPROVED BY CUSTOMERAVL Status
PREPAREDAPPROVED QA
A
Please return one copy with approval to PSE-TW
No.2, Tzu-Chiang 5th Rd, Chung Li Industrial Park,
Chung Li City, Taoyuan County, Taiwan (R.O.C.)
TEL: 886-3-451-8888
FAX: 886-3-461-3865
http://www.saronix-ecera.com.tw
E0-R-4-014 Rev. E Page i
VERSION HI STORY
Version
No.
Version
Date
Customer Receipt
Date
Supplier Receipt
Date
4-Feb-10VER. A
G2 Series 2.0x6.0mm Cylinder Through Hole Quartz Crystal
G2327002
3
Description
A Nov.6,2015
Notes
Initial Release
E0-R-4-014 Rev. E Page ii
ELECTRICA L SPECIFICATIONS
SRe Part Number : G23270023
G2327002
3
VER. A
Parameters
Symbol
Units
1
K
35 K
ppm
12.5Load Capacitance
Temperature Coefficient
-10 to +60
Max.
pF Typical
ppm/°C
2
Max.
Max.
Specifications Notes
KHz
μW
G2 Series 2.0x6.0mm Cylinder Through Hole Quartz Crystal
TypicalCL
MO Fundamental
+2
o
X-Cut
Nominal Frequency Fn
4-Feb-10
at 25 ± 5
pF
DL
FT
32.768
Frequency Tolerance
Mode of Oscillation
Drive Level
Shunt Capacitance C0 C0 1.5
Equivalent Series Resistance ESR
Operating Temperature Range TR
±20
-0.04
°C
Reliability ( Mechanical and Environmental Endurance )
No.
1
(1) Vibration Frequency: 10 to 55Hz
(2) Vibration Amplitude: 1.5mm
(3) Cycle Time: 1-2min(10-55-10Hz)
(4) Direction: X.Y.Z
(5) Duration: 2h/each direction
2
3 Times free drop from 75cm height to hard wooden
board of thickness more than 30mm
3
Put crystal units into a hermetic container and
Helium for 0.5-0.6Mpa, and keep it for 1h;
Check the leakage by a Helium leak detector
A
ging
at DC 100V ± 15V500 M
Max 1st year± 3
Insulation Resistance
ppm
Test Items Test Method and Condition Requirements
Vibration
Frequency Change: ±10ppm Max.
Resistance Change:5kohm Max.
Shock
Frequency Change: ±10ppm Max.
Resistance Change:5kohm Max.
Leakage
Leakage: 1x10¯8Pa·m1/s Max.
E0-R-4-014 Rev. E Page 1
4 Lead Strength
The crystal lead with the 0.9kg(9N) power (keep it for The crystal lead is not abnormity
(DIP)
30s±5s) and bend the crystal lead 90° with 0.45kg
power and two times
5 High Temperature
The crystal units shall be put in somewhere for 2 hrs Frequency Change: ±10ppm Max.
Endurance
at temperature of 85±2, then keep it for 1 to 2 hrs Resistance Change:5kohm Max.
under room temperature.
6 Low Temperature
The crystal units shall be put in somewhere for 2 hrs
Endurance
at temperature of -25, then keep it for 1 to 2 hrs
under room temperature.
7 Humidity
The crystal units shall be put in somewhere at 40
Endurance
in relative humidity of 90-95% for 48 hrs, then keep
it for one or two hours under room temperature.
8 Temperature
Temperature shift from low(-40) to high(100, keep
Cycle
30 mins), satisfy high(100) to low(-40, keep
30 mins), then go up to room temperature for 5 cycles.
10 Salt Spray Test
Put the crystal units in the salt spray room (salt The appearance shall has no abnormity
density: 5%) at the temperature of 35 for 96 hrs. and soldering is good.
Then clean it with water and dry its surface. Frequency Change: ±10ppm Max.
Rit Ch 5khM
G2327002
3
VER. A
G2 Series 2.0x6.0mm Cylinder Through Hole Quartz Crystal
4-Feb-10
R
es
i
s
t
ance
Ch
ange:
5k
o
h
m
M
ax.
E0-R-4-014 Rev. E Page 2
MARKING
DIMENSIONS (Unit:mm)
Date Code Factory Code
eBEmv
v
G2327002
3
VER. A 4-Feb-10
m
G2 Series 2.0x6.0mm Cylinder Through Hole Quartz Crystal
Date & Factory Code
E0-R-4-014 Rev. E Page 3
PACKING
G2327002
3
VER. A 4-Feb-10
G2 Series 2.0x6.0mm Cylinder Through Hole Quartz Crystal
Quantity for Each Bag : 1000 pcs
Storeroom Label
Green Qualified Label
Deliver Packing Carton
(L25.5*W25.5*H18)
E0-R-4-014 Rev. E Page 4