RSF20 Series Low level switch for boiling water Pivot out of liquid Low level switch position WRAS approved for use in hot & cold water Many variants are UL recognised components File No. E171218 High buoyancy float Technical Specification Material The RSF20 is designed to eliminate the problems associated with limescale build up around the pivot point on a conventional float switch. This particular series is primarily for applications where a low level condition has to be monitored, in a system where the liquid is usually maintained at a high level, or where a wider differential is required between the opening and closing levels. The extended drop float actuator allows the switch housing and float pivots to be located above the surface of the liquid, while the excess buoyancy of the float chamber itself ensures that it floats, even when scale builds up on the float chamber . Typical applications include wall kettles and hot vending machines. The switch is closed when the level is low(float down) and opens as the liquid level rises. Colour Temp. Range C F Minimum liquid SG Must close level (SG=1) Must open level (SG=1) * Maximum temperature requires ETFE cable to be specified. Electrical Specification Contact Form Switching Power Max VA Switching Voltage AC Max V Switching Voltage DC Max V Switching Current Max A All ratings are for resistive load only. Standard Parts RSF26H050TG RSF26H100RF RSF26Y050TG RSF26Y100RF Material PPS PPS PPS PPS Email:sales@cynergy3.com ISO9001 C E R T I F I E D 25W (Y code) N/C 25 240 120 0.6 100W (H code) N/C 100 300 300 1 Approvals WRAS & UL WRAS & UL WRAS & UL WRAS & UL Max Power 100VA 100VA 25VA 25VA Leadouts 50cm ETFE 19/0.2 1 metre PVC 16/0.2 50cm ETFE 19/0.2 1 metre PVC 16/0.2 Gasket Viton Nitrile Viton Nitrile Custom versions can be made for particular applications. Please contact Cynergy3 with your requirements. Mechanical Dimensions All dimensions are in millimetres (inches) Gasket Seal Switch Open 30 Max. Switch closed 6 min. 166.0 (6.5") Nominal Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Polyphenylene Sulphide (PPS) Grey -10 / +120 * +14 / +248 * 0.85 9mm 24mm Fully Extended Must open level 8mm (0.3") max tank wall M16 x 2.0 Supplied with Nylon Hex Half Nut 16.5mm (0.65") dia. Hole in Tank O 24mm (0.9") Mounting Surface Internal 33.5mm (1.3") 148mm (5.8") Must close level www.cynergy3.com (c) 2011 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.