05144 MMAD1108 Only One Name Means ProTek'TionTM ultra low capacitance multi-line steering diode array Description The MMAD1108 is a low distortion steering diode. This device is intended for use in high frequency analog or digital data I/O ports for protection against Electrostatic Discharge (ESD) and Electrical Fast Transients (EFT). The MMAD1108 is connected between rail-to-rail voltage bus or rail-to-ground for clamping and diverting overvoltage transients for the protection of sensitive network interface circuits. This device provides low capacitance, which insures signal integrity up to 900MHz, while complete isolation between adjacent diodes keeps cross-talk to a minimum. The MMAD1108 is available in a SO-16 package and meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. so-16 package Features applications * Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV * Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns * Compatible with IEC 61000-4-5 (Surge): 12A, 8/20s - Level 1(LineGnd) & Level 2(Line-Line) * 500 Milliwatt Continuous Power Dissipation * Monolithic Design * ESD Protection > 25 kilovolts * Protects up to 8 I/O Lines * Working Voltage > 50 Volts * Low Leakage Current < 0.1A * Ultra Low Capacitance: 5pF per Diode * RoHS Compliant * REACH Compliant * * * * High Frequency Data Lines RS-232 & RS-422 Interface Networks Ethernet 10/100 Base T Computer I/O Ports Mechanical characteristics * Molded JEDEC SO-16 Package * Approximate Weight: 0.15 grams * Lead-Free Pure-Tin Plating (Annealed) * Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270C * 16mm Tape and Reel Per EIA Standard 481 * Flammability Rating UL 94V-0 PIN CONFIGURATION 1 2 3 4 16 15 14 13 6 7 8 12 11 10 9 5 8 LINES OF PROTECTION 05144.R9 1/11 Page 1 www.protekdevices.com 05144 MMAD1108 Only One Name Means ProTek'TionTM typical device characteristics MAXIMUM RATINGS @ 25C Unless Otherwise Specified PARAMETER Continuous Power Dissipation SYMBOL VALUE UNITS PPK 500 Milliwatts Continuous Forward Current (Single Diode) IP 400 mA Repetitive Peak Forward Current @ tp = 5s, F = 50kHz IFRM 700 mA Operating Temperature TA -55 to 150 C TSTG -55 to 150 C Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25C Unless Otherwise Specified PART NUMBER MMAD1108 REPETITIVE PEAK REVERSE VOLTAGE maximum forward peak pulse current maximum forward voltage MAXIMUM reverse leakage current maximum CAPACITANCE (Per Diode) @ 10A V RRM VOLTS @ 8/20s I FM amps @ 100mA VF volts V RRm @ 40v Ir A @4V, 1MHz Cj pF 50 12 1.2 0.1 5 figure 1 pulse wave form IPP - Peak Pulse Current - % of IPP 120 100 TEST WAVEFORM PARAMETERS tf = 8s td = 20s Peak Value IPP 80 e-t 60 40 td = t/(IPP/2) 20 0 05144.R9 1/11 tf 0 5 10 15 t - Time - s Page 2 20 25 30 www.protekdevices.com 05144 MMAD1108 Only One Name Means ProTek'TionTM So-16 package information outline dimensions dim millimeters -A- inches min max min max A 9.80 10.00 0.386 0.393 B 3.80 4.00 0.150 0.157 C 1.35 1.75 0.054 0.068 D 0.35 0.49 0.014 0.019 F 0.40 1.25 0.016 0.049 G 1.27 BSC -B1 0.05 BSC 0.18 0.25 0.007 0.009 K 0.10 0.25 0.004 0.008 P 5.80 6.20 0.229 0.244 R 0.25 0.50 0.010 0.019 -T- = Seating plane and datum surface. Dimensions "A" and "B" are datum. Dimensions "A" and "B" do not include mold protrusion. Maximum mold protrusion is 0.015" (0.380mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. dim max min max 1.14 1.40 0.045 0.055 B 0.64 0.89 0.025 0.035 C 6.22 - 0.245 - D 3.94 4.17 0.155 0.165 E 1.02 1.27 0.040 0.050 NOTES 05144.R9 1/11 R X 45 C -T- + 0.010" (0.25mm) M T B S A S K F 16 PL B inches min 1. Controlling dimension: inches. D A A + 0.010" (0.25mm) M B M 0 - 10 pad layout dimensions millimeters P 8 PL 8 G J NOTES 1. 2. 3. 4. 5. 6. 9 16 C D E Page 3 www.protekdevices.com J 05144 MMAD1108 Only One Name Means ProTek'TionTM TAPE AND REEL P0 D t 10 Pitches Cumulative Tolerance on tape 0.2 P2 Pin 1 E F W K0 B0 A0 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7") 16mm A0 B0 K0 D E F W P0 P2 P tmax 6.50 0.10 10.30 0.10 2.10 0.10 1.50 0.10 1.75 0.10 3.50 0.05 16.00 0.30 4.00 0.12 2.00 0.10 4.00 0.10 0.25 Notes 1. 2. 3. 4. 5. 6. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7" Reel - 1,000 pieces per 16mm tape. Suffix - T13 = 13" Reel - 2,500 pieces per 16mm tape. Bulk product shipped in tubes of 48 pieces per tube. Marking on Part - part number, date code, logo and pin one defined by dot on top of package. Package outline per document number 06007.R3 1/11. ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty MMAD1108 -LF -T7 1,000 7" 48 MMAD1108 -LF -T13 2,500 13" 48 05144.R9 1/11 Page 4 www.protekdevices.com 05144 MMAD1108 Only One Name Means ProTek'TionTM company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com Web www.protekdevices.com www.protekanalog.com COPYRIGHT (c) ProTek Devices 2000 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05144.R9 1/11 Page 5 www.protekdevices.com