MOS FET Relays G3VM-21GR1 New MOS FET Relay with Low Output Capacitance and ON Resistance (CR = 5pF* W) in a 20-V Load Voltage Model * ON resistance of 1 W (typical) suppresses output signal attenuation. * Leakage current of 1.0 nA max. when output relay is open. Application Examples Note: The actual product is marked differently from the image shown here. * Semiconductor inspection tools * Measurement devices * Broadband systems * Data loggers List of Models Contact form SPST-NO Terminals Surface-mounting terminals Load voltage (peak value) 20 VAC Model Number per stick G3VM-21GR1 100 G3VM-21GR1(TR) --- Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-21GR1 4.40.25 3.90.2 2.1 max. 0.15 Note: The actual product is marked differently from the image shown here. 0.40.1 0.60.3 0.10.1 7.00.4 2.540.25 Weight: 0.1 g Terminal Arrangement/Internal Connections (Top View) G3VM-21GR1 4 3 1 2 Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-21GR1 6 to 6.3 1.2 0.8 2.54 50 Number per tape 2,500 G3VM-21GR1 G3VM-21GR1 Absolute Maximum Ratings (Ta = 25C) Item Input Symbol Rating Unit Measurement Conditions Note: LED forward current IF 50 mA Repetitive peak LED forward current IFP 1 A 100 ms pulses, 100 pps LED forward current reduction rate D IF/C -0.5 mA/C Ta 25C LED reverse voltage VR 5 V Connection temperature Tj 125 C Output dielectric strength VOFF 20 V Continuous load current IO 300 mA ON current reduction rate D ION/C -3.0 mA/C Connection temperature Tj 125 C Dielectric strength between input and output (See note 1.) VI-O 1,500 Vrms AC for 1 min Operating temperature Ta -20 to +85 C With no icing or condensation Storage temperature Tstg -55 to +125 C With no icing or condensation Soldering temperature (10 s) --- 260 C 10 s Output 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Ta 25C Electrical Characteristics (Ta = 25C) Item Input Output Symbol Minimum Typical Maximum Unit Measurement conditions Note: LED forward voltage VF 1.0 1.15 1.3 V IF = 10 mA Reverse current IR --- --- 10 mA VR = 5 V Capacity between terminals CT --- 15 --- pF V = 0, f = 1 MHz Trigger LED forward current IFT --- --- 4 mA IO = 100 mA Maximum resistance with output ON RON --- 1 1.5 W IF = 5 mA, IO = 300 mA, t < 1 s Current leakage when the relay is open ILEAK --- --- 1.0 nA VOFF = 20 V Ta = 50C Capacity between terminals COFF --- 5.0 12.0 pF V = 0, f = 100 MHz, t<1s CI-O --- 0.8 --- pF f = 1 MHz, Vs = 0 V RI-O 1,000 Capacity between I/O terminals Insulation resistance --- --- VI-O = 500 VDC, RoH 60% IF = 10 mA, RL = 200 W, VDD = 20 V (See note 2.) tON --- --- 0.5 ms Turn-OFF time tOFF --- --- 0.5 ms IF 1 4 2 3 RL VDD VOUT IF MW Turn-ON time 2. Turn-ON and Turn-OFF Times VOUT 10% t ON 90% t OFF Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Output dielectric strength VDD --- --- Operating LED forward current IF 7 Continuous load current IO --- Operating temperature Ta 25 --- Maximum Unit 20 V --- 30 mA --- 300 mA 60 C Engineering Data Safety Precautions Load Current vs. Ambient Temperature Refer to page 6 for precautions common to all G3VM models. Load current (mA) G3VM-21GR1 400 350 300 250 200 150 100 50 0 -20 0 20 40 60 80 100 Ambient temperature (C) 51