50
G3VM-21GR1
MOS FET Relays
New MOS FET Relay with Low Output
Capacitance and ON Resistance (C´R =
5pF· W) in a 20-V Load Voltage Model
• ON resi stance of 1 W (typic al) su ppresses output signa l
attenuation.
• Leakage current of 1.0 nA max. when output relay is
open.
■Application Examples
• Semiconductor inspection tools
• Measurement devices
• Broadband systems
• Data loggers
Note: The actual product is marked differently from the image
shown here.
■List of Models
■Dimensions
Note: All units are in millimeters unless otherwise indicated.
■Terminal Arrangement/Internal Connections (Top View)
■Actual Mounting Pad Dimensions (Recommended Value, Top View)
Contact form Terminals Load voltage (peak value) Model Number per stick Number per tape
SPST-NO Surface-mounting
terminals 20 VAC G3VM-21GR1 100
G3VM-21GR1(TR) --- 2,500
4.4±
0.25
3.9±
0.2
0.4±
0.1
2.54±
0.25
2.1 max.
0.1±
0.1
7.0±
0.4
0.6±
0.3
0.15
G3VM-21GR1
Note: The actual product is marked differently
from the image shown here. Weight: 0.1 g
43
12
G3VM-21GR1
6 to 6.3
1.2
0.8
2.54
G3VM-21GR1
51
G3VM-21GR1G3VM-21GR1
■Absolute Maximum Ratings (Ta = 25°C)
■Electrical Characteristics (Ta = 25°C)
■Recommended Operating Conditions
Use the G3VM under the foll owing conditions so that the Relay will operate properly.
■Engineering Data
Load Current vs. Ambient Temperature
G3VM-21GR1
■Safety Precautions
Refe r to page 6 for prec autions com mon to all G3VM models.
Item Symbol Rating Unit Measurement Conditions
Input LED forward current IF50 mA
Repetitive peak LED forward
current IFP 1 A 100 ms pulses, 100 pps
LED forward curr ent reduction
rate D IF/°C-0.5 mA/°CTa ³ 25°C
LED reverse voltage VR5V
Connection temperature Tj125 °C
Output Output dielectric strength VOFF 20 V
Continuous load current IO300 mA
ON current reduction rate D ION/°C-3.0 mA/°CTa ³ 25°C
Connection temperature Tj125 °C
Dielectric strength between input and
output (See note 1.) VI-O 1,500 Vrms AC for 1 min
Operating temperature Ta-20 to +85 °C With no i cing or condensat ion
Storage temperature Tstg -55 to +12 5 °C W ith no icing or con densatio n
Soldering temperature (10 s) --- 260 °C10 s
Note: 1. The dielectric strength between the input and
output was checked by applying voltage be-
tween all pins as a group on the LED side and
all pins as a group on the light-receiving side.
Item Symbol Mini-
mum Typical Maxi-
mum Unit Measurement
conditions
Input LED forward voltage VF1.0 1.15 1.3 V IF = 10 mA
Reverse current IR--- --- 10 mAV
R = 5 V
Capacity between terminals CT--- 15 --- pF V = 0, f = 1 MHz
Trigger LED forward current IFT --- --- 4 mA IO = 100 mA
Output Maximum resi stance with output ON RON --- 1 1.5 WIF = 5 mA,
IO = 300 mA, t < 1 s
Current leakage when the relay is
open ILEAK --- --- 1.0 nA VOFF = 20 V
Ta = 50°C
Capacity between terminals COFF --- 5.0 12.0 pF V = 0, f = 100 MHz,
t < 1 s
Capacity between I/O terminals CI-O --- 0.8 --- pF f = 1 MHz, Vs = 0 V
Insulation resistance RI-O 1,000 --- --- MWVI-O = 500 VDC,
RoH £ 60%
Turn-ON time tON --- --- 0.5 ms IF = 10 mA, RL = 200 W,
VDD = 20 V (See note 2.)
Turn-OFF time tOFF --- --- 0.5 ms
VOUT
IF
tON tOFF
10% 90%
IF1
2
4
3
RLVDD
VOUT
Note: 2. Turn-ON and Turn-OFF
Times
Item Symbol Minimum Typical Maximum Unit
Output dielectric strength VDD --- --- 20 V
Operating LED forward current IF7 --- 30 mA
Continuous load curren t IO--- --- 300 mA
Operating temperature Ta25 --- 60 °C
Ambient temperature (°C)
Load current (mA)
400
350
300
250
200
150
100
50
0−20 0 20 40 60 80 100
