Document 281-1 Shielded Power Inductors-MSS1260 * 12.3 x 12.3 mm footprint; 6 mm high shielded inductors * Low DCR and excellent current handling Designer's Kit C360 contains 3 each of all values. Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant matte tin over nickel over phos bronze. Other terminations available at additional cost. Weight: 2.8 - 3.3 g Ambient temperature -40C to +85C with Irms current, +85C to +125C with derated current Storage temperature Component: -40C to +125C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 500/13 reel; Plastic tape: 24 mm wide, 0.35 mm thick, 16 mm pocket spacing, 6.3 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. DCR3 Isat (A)5 Irms (A)6 SRF (mOhms) Inductance2 typ4 10% 20% 30% 20C 40C Part number1 (H) typmax (MHz) drop drop drop rise rise MSS1260-102NL_1.0 30% 5.8 6.5 100 19.1 21.4 22.7 6.00 8.00 MSS1260-152NL_1.5 30% 8.8 9.8 80.0 15.0 16.6 17.6 6.00 7.50 MSS1260-222NL_2.2 30% 11.5 12.8 55.0 11.7 13.0 13.9 5.50 7.00 MSS1260-332NL_3.3 30% 12.6 14.0 42.0 10.4 11.7 12.5 5.00 7.00 MSS1260-472ML_4.7 20% 13.9 15.5 33.0 9.22 10.1 10.8 4.50 7.00 MSS1260-562ML_5.6 20% 14.9 16.6 30.0 7.86 9.02 9.74 4.00 6.40 MSS1260-682ML_6.8 20% 16.6 18.5 27.0 7.40 8.26 8.80 3.80 5.90 MSS1260-822ML_8.2 20% 17.0 20.0 26.0 7.10 7.96 8.50 3.40 4.80 MSS1260-103ML_10 20% 21.5 23.9 22.0 6.18 6.92 7.40 3.00 4.00 MSS1260-123ML_12 20% 24.5 27.3 20.0 5.18 5.94 6.42 2.80 3.70 MSS1260-153ML_15 20% 27.0 32.0 18.0 4.80 5.40 5.78 2.60 3.50 MSS1260-183ML_18 20% 30.0 33.0 16.0 4.58 5.22 5.62 2.50 3.30 MSS1260-223ML_22 20% 36.6 40.7 15.0 4.06 4.64 4.96 2.30 3.10 MSS1260-273ML_27 20% 48.0 52.0 13.0 3.52 3.96 4.28 2.10 2.90 MSS1260-333ML_33 20% 54.0 57.0 12.4 3.22 3.74 4.02 2.00 2.70 MSS1260-393ML_39 20% 58.0 64.5 12.0 3.08 3.56 3.80 1.90 2.60 MSS1260-473ML_47 20% 75.0 82.0 11.6 2.66 3.04 3.30 1.85 2.50 MSS1260-563ML_56 20% 85.0 89.0 10.5 2.54 2.96 3.14 1.75 2.40 MSS1260-683ML_68 20% 94.5 105 10.0 2.40 2.70 2.94 1.70 2.30 MSS1260-823ML_82 20% 120 129 8.6 2.16 2.46 2.64 1.60 2.20 MSS1260-104ML_ 100 20% 139 146 7.8 1.88 2.16 2.32 1.50 2.10 MSS1260-124KL_ 120 10% 193 195 6.8 1.70 1.92 2.10 1.38 1.85 MSS1260-154KL_ 150 10% 209 216 6.4 1.58 1.80 1.98 1.20 1.66 MSS1260-184KL_ 180 10% 234 246 6.1 1.40 1.60 1.72 1.14 1.58 MSS1260-224KL_ 220 10% 306 335 5.5 1.28 1.44 1.56 1.00 1.42 MSS1260-274KL_ 270 10% 349 355 4.3 1.10 1.26 1.38 0.90 1.45 MSS1260-334KL_ 330 10% 482 494 4.0 1.00 1.14 1.24 0.84 1.16 MSS1260-394KL_ 390 10% 515 533 3.6 0.93 1.06 1.15 0.78 1.08 MSS1260-474KL_ 470 10% 705 733 3.0 0.87 0.99 1.06 0.70 0.96 MSS1260-564KL_ 560 10% 776 800 2.8 0.81 0.92 1.00 0.64 0.88 MSS1260-684KL_ 680 10% 887 910 2.6 0.74 0.85 0.92 0.58 0.80 MSS1260-824KL_ 820 10% 1130 1152 2.5 0.66 0.76 0.81 0.53 0.73 MSS1260-105KL_ 1000 10% 1295 1335 2.4 0.60 0.69 0.74 0.48 0.68 1. Please specify termination and packaging codes: MSS1260-184KLD Termination:L =RoHS compliant matte tin over nickel over phos bronze. Special order: T= RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: D =13 machine-ready reel. EIA481 embossed plastic tape (500 parts per full reel). B =Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent. 3. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test fixture. 4. SRF measured using Agilent/HP 4191A or equivalent. 5. DC current at which the inductance drops the specified amount from its value without current. 6. Current that causes the specified temperature rise from 25C ambient. 7. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 281-1 Revised 10/31/11 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 281-2 Shielded Power Inductors - MSS1260 Typical L vs Current Typical L vs Frequency 10000 10000 1000 H 100 H 100 10 H 10 1 H 1 0.1 0.1 1000 H 1000 Inductance (H) Inductance (H) 1000 100 H 100 10 H 10 1 H 1 100 10 1 0.1 0.01 0.472 0.012 12,0 0,3 120 110 0.472 0.012 12,0 0,3 100 90 123 Dash number X Internal code 80 70 60 50 Parts manufactured prior to August 2011 may have a different part marking. 0.025 * 0,635 0.24 0.008* 6,0 0,2 Recommended Land Pattern 40 20 10 0 25C 30 Isat Irms -40 -20 0 20 10 Frequency (MHz) Typical Current Derating Percent of rated current 1 0.1 Current (A) 0.217 5,5 0.197 0.008 5,0 0,2 40 60 80 100 120 140 0.138 0.016 3,5 0,4 0.157 4,0 0.197 0.016 5,0 0,4 Ambient temperature (C) 0.334 8,5 * For optional tin-lead and tin-silver-copper terminations, dimensions are for the mounted part. Dimensions before mounting can be an additional 0.012 inch (0,3 mm). Dimensions are in inches mm US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 281-2 Revised 10/31/11 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.