Datasheet Rev. IJ1
Issued 2009/10
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para -
me ters, test conditions and
processing information only
to be used together with the
'Definitions' section in the
cat -
alogue or at schrackrelays.com
in the ‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays
1
SCHRACK
Safety Relay SR2M
Approvals
VREG.-Nr. 116064, ZE214024, T968/EZ 111.03/05
Technical data of approved types on request
Contact data
Contact configuration 1 NO contact and 1 NC contact
or
2 CO contacts1)
Contact set single contact, forcibly guided
1 NC + 1NO: type A according to EN 50205
2 CO: type B according to EN 50205
Type of interruption micro disconnection
Rated voltage / max. switching voltage AC 250 / 400 VAC
Rated current 6 A
Maximum breaking capacity AC 1500 VA
Contact material AgNi
Minimum contact load 10 mA / 5 V
Contact resistance w100 mOhm / 1 A / 24 VDC
w20 Ohm / 10 mA / 5 VDC
Rated frequency of operation with / without load 6 min-1 / 300 min-1
1) According EN50205 only 1NO / 1NC (11-14 and 22-21 or 12-11 and 21-24) shall be used as forcibly
guided contacts.
Contact ratings
Type Contact Load*) Ambient Cycles
temp. [°C]
UL 508
V23047-A1…-A501 1 NO B300 pilot duty 40°C 6x103
V23047-A1…-A501 1 NO R300 pilot duty 40°C 6x103
V23047-A1…-A511 1 NO B300 pilot duty 40°C 6x103
V23047-A1…-A511 1 NO R300 pilot duty 40°C 6x103
*) load on one pole
Coil data
Rated coil voltage range DC coil 5...110 VDC
Operative range to IEC 61810 2
Coil versions, DC-coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ohm mW
005 5 3.8 0.5 35,7+10% 700
006 6 4.5 0.6 51+10% 706
009 9 6.8 0.9 116+10% 698
012 12 9.0 1.2 206+10% 699
015 15 11.3 1.5 321+10% 700
018 18 13.5 1.8 483+10% 671
021 21 15.8 2.1 630+10% 700
024 24 18.0 2.4 823+10% 700
036 36 27.0 3.6 1851+10% 700
n2 pole safety relay with either 1NO+1NC or 2CO contacts
nForcibly guided contacts according to EN 50205
nRated current 6 A
n6 kV surge resistance between poles
Applications
Emergency shut-off, machine control, elevator and escalator
control, light barrier control
F0188-D
Datasheet Rev. IJ1
Issued 2009/10
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para -
me ters, test conditions and
processing information only
to be used together with the
'Definitions' section in the
cat -
alogue or at schrackrelays.com
in the ‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays SCHRACK
2
Safety Relay SR2M (Continued)
PCB layout / terminal assignment
Bottom view on solder pins
Dimensions
2 CO contacts
1 NO and 1 NC contacts
S0163-CO
S0163-BJ
S0163_CU
S0163-CV
S0273-BB
Coil versions, DC-coil (continued)
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ohm mW
040 40 30.0 4.0 2286+10% 700
048 48 36.0 4.8 3291+12% 700
060 60 45.0 6.0 5142+12% 700
080 80 64.0 8.5 9143+12% 700
110 110 82.5 11.0 17285+12% 700
All figures are given for coil without preenergization, at ambient temperature +23°C
Other coil voltages on request
Insulation
Dielectric strength coil-contact circuit 4000 Vrms
open contact circuit 1500 Vrms
adjacent contact circuits 3000 Vrms
Clearance / creepage coil-contact circuit W8 / 8 mm
adjacent contact circuits W5.5 / 5.5 mm
Material group of insulation parts IIIa
Tracking index of relay base PTI 250
Insulation to IEC 61810-1
Type of insulation coil-contact circuit reinforced
open contact circuit micro disconnection
adjacent contact circuits basic
Rated insulation voltage 250 V
Pollution degree 2
Rated voltage system 230 / 400 V
Overvoltage category III
Insulation to EN 50178
Type of insulation coil-contact circuit reinforced
adjacent contact circuits reinforced
Other data
Mechanical endurance 10x106cycles
Material
RoHS - Directive 2002/95/EC compliant as per product date code 0407
Environment
Ambient temperature range -25...+70 °C
Vibration resistance (function) NO / NC contact
> 10 / 2.5 g, 15....200 Hz
Shock resistance (function) NO / NC contact > 10 / 5 g, 11 ms half sine
Category of protection RT III2)
Processing
Resistance to soldering heat 260°C / 5 s
Relay weight 20 g
Packaging unit 20 pcs
2) please contact technical support for washing parameters
Datasheet Rev. IJ1
Issued 2009/10
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para -
me ters, test conditions and
processing information only
to be used together with the
'Definitions' section in the
cat -
alogue or at schrackrelays.com
in the ‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays
3
SCHRACK
Safety Relay SR2M (Continued)
Product key Version Contact material Configuration Coil Part number
V23047-A1005-A501 standard AgNi 2 CO contacts 5 VDC 1393258-2
V23047-A1005-A511 wash tight 1 NO + 1 NC 7-1415006-1
V23047-A1006-A501 2 CO contacts 6 VDC 3-1415011-1
V23047-A1006-A511 1 NO + 1 NC 6-1415011-1
V23047-A1009-A501 2 CO contacts 9 VDC 1393258-3
V23047-A1009-A511 1 NO + 1 NC 7-1415011-1
V23047-A1012-A501 2 CO contacts 12 VDC 1393258-4
V23047-A1012-A511 1 NO + 1 NC 1393258-5
V23047-A1018-A501 2 CO contacts 18 VDC 1393258-8
V23047-A1018-A511 1 NO + 1 NC 1393258-9
V23047-A1021-A501 2 CO contacts 21 VDC 1-1393258-1
V23047-A1021-A511 1 NO + 1 NC 1-1393258-2
V23047-A1024-A501 2 CO contacts 24 VDC 1-1393258-5
V23047-A1024-A511 1 NO + 1 NC 1-1393258-7
V23047-A1036-A501 2 CO contacts 36 VDC 2-1393258-0
V23047-A1036-A511 1 NO + 1 NC 8-1415011-1
V23047-A1040-A501 2 CO contacts 40 VDC 2-1393258-1
V23047-A1040-A511 1 NO + 1 NC 2-1393258-2
V23047-A1048-A501 2 CO contacts 48 VDC 3-1415006-1
V23047-A1048-A511 1 NO + 1 NC 9-1415011-1
V23047-A1060-A511 60 VDC 2-1393258-3
V23047-A1110-A511 110 VDC 2-1415012-1
Product key Typical product key V23047 -A1 012 -A 5 11
Type
V23047 Safety Relay SR2M
Version
A1 standard
Coil
Coil code = rated coil voltage (e.g. 024=24 VDC)
Contact set
Asingle contact
Contact material
5AgNi
Contact configuration
01 2 CO contacts (2 form C)
11 1 NO and 1 NC contact (1 form A + 1 form B)
Other types on request
