SMV1236-011LF - Skyworks Solutions

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200058 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • November 9, 2004 1

SMV1232–SMV1237: Hyperabrupt Tuning Varactors

DATA SHEET

Characteristic Value

Reverse voltage (VR) 15 V

Forward current (IF) 20 mA

Power dissipation (PD) 250 mW

Storage temperature (TST) -55 °C to +150 °C

Operating temperature (TOP) -55 °C to +125 °C

ESD human body model Class 1B

Absolute Maximum Ratings

Features

●High capacitance ratio, C1 V/C3 V = 1.8, C1 V/C6 V = 3.1

●Low series resistance for low phase noise

●Multiple packages SOT-23, SOD-323, SC-70 and SC-79

●Designed for high volume commercial applications

●Full characterization with SPICE models

Description

The SMV1232–SMV1237 series of silicon hyperabrupt junction

varactor diodes is designed for use in VCOs with low tuning voltage

operation. The low resistance of these varactors makes them

appropriate for high Q resonators in wireless system VCOs

to frequencies beyond 2.5 GHz. The SMV1232–SMV1237 series is

fully characterized for capacitance and resistance over tempera-

ture. SPICE model is provided.

Skyworks offers lead (Pb)-free “environmentally

friendly” packaging that is RoHS compliant

(European Parliament for the Restriction of

Hazardous Substances).

NEW

Performance is guaranteed only under the conditions listed in the specifications table and is

not guaranteed under the full range(s) described by the Absolute Maximum specifications.

Exceeding any of the absolute maximum/minimum specifications may result in permanent

damage to the device and will void the warranty.

CAUTION: Although this device is designed to be as robust as

possible, Electrostatic Discharge (ESD) can damage

this device. This device must be protected at all times

from ESD. Static charges may easily produce poten-

tials of several kilovolts on the human body or

equipment, which can discharge without detection.

Industry-standard ESD precautions must be employed

at all times.

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

November 9, 2004 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200058 Rev. C

DATA SHEET • SMV1232–SMV1237

CTCTCT@ 1 V CT@ 1 V RS@ 3 V Q

Part CT@ 1 V @ 3 V @ 6 V CT@ 3 V CT@ 6 V 500 MHz @ 3 V

Number (pF) (pF) (pF) (Ratio) (Ratio) (ΩΩ) 50 MHz

Min. Max. Typ. Typ. Min. Max. Min. Max. Max. Typ.

SMV1232 2.34 2.86 1.5 0.94 1.5 1.9 2.6 3.3 1.50 1400

SMV1233 3.00 3.60 1.8 1.10 1.5 1.9 2.6 3.3 1.20 1200

SMV1234 5.85 7.15 3.6 2.00 1.6 2.0 2.8 3.4 0.80 1000

SMV1235 10.35 12.65 6.4 3.60 1.6 2.0 2.9 3.4 0.60 750

SMV1236 15.50 18.50 9.2 5.30 1.6 2.0 3.0 3.5 0.50 700

SMV1237 45.00 54.00 26.9 14.40 1.6 2.0 3.0 3.5 0.25 500

Electrical Specifications at 25 °C

Reverse Voltage VR(IR= 10 µA): 15 V minimum.

Reverse Current IR(VR= 12 V): 20 nA maximum.

Single Single Single Common Anode Common Cathode Common Anode Common Cathode

SC-79 SOD-323 SOT-23 SOT-23 SOT-23 SC-70 SC-70

SMV1232-079 SMV1232-011 SMV1232-004 SMV1232-074

Marking: Cathode Marking: CC Marking: CC3

SMV1232-074LF

Marking: DP3

SMV1233-079 SMV1233-011 SMV1233-001 SMV1233-003 SMV1233-004 SMV1233-073 SMV1233-074

Marking: Cathode Marking: VP Marking: VP1 Marking: VP9 Marking: VP3 Marking: VP9 Marking: VP3

SMV1233-011LF

Marking: DP

SMV1234-079 SMV1234-011 SMV1234-001 SMV1234-003 SMV1234-004 SMV1234-073 SMV1234-074

Marking: Cathode Marking: VQ Marking: VQ1 Marking: VQ9 Marking: VQ3 Marking: VQ9 Marking: VQ3

SMV1234-079LF SMV1234-011LF

Marking: Cathode Marking: DQ

SMV1235-079 SMV1235-011 SMV1235-001 SMV1235-004 SMV1235-074

Marking: Cathode Marking: VR Marking: VR1 Marking: VR3 Marking: VR3

SMV1235-004LF

Marking: DR3

SMV1235-011LF

Marking: DR

SMV1236-079 SMV1236-011 SMV1236-001 SMV1236-004 SMV1236-074

Marking: Cathode Marking: AQ Marking: AQ1 Marking: AQ3 Marking: AQ3

SMV1236-079LF SMV1236-011LF SMV1236-004LF

Marking: Cathode Marking: DQ Marking: EQ3

SMV1237-001 SMV1237-004 SMV1237-074

Marking: VT1 Marking: VT3 Marking: VT3

LS= 0.7 nH LS= 1.5 nH LS= 1.5 nH LS= 1.5 nH LS= 1.5 nH LS= 1.4 nH LS= 1.4 nH

LF denotes lead (Pb)-free packaging option as an alternative to our standard

tin/lead (Sn/Pb) packaging.

DATA SHEET • SMV1232–SMV1237

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200058 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • November 9, 2004 3

0.1

10.0

1.0

100.0

6.0 8.04.0

Reverse Voltage (V)

Capacitance vs. Reverse Voltage

2.00

Capacitance (pF)

SMV1237

SMV1236

SMV1235

SMV1234

SMV1233 SMV1232

-4

-3

-2

-1

-40 -20 0 20 40 60 80

Percentage Change (%)

Temperature (˚C)

Relative Capacitance Change

vs. Temperature

VR = 1 V

VR = 3 V

-2

-4

-6

-8

-40 -20 0 20 40 60 80

Percentage Change (%)

Temperature (˚C)

Relative Series Resistance Change

vs. Temperature @ 500 MHz

Reverse Voltage (V)

Series Resistance vs. Reverse Voltage

@ 500 MHz

01 2 3 45

RS (Ω)

SMV1232 SMV1233

SMV1234

SMV1235

SMV1237

SMV1236

Typical Performance Data

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

November 9, 2004 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200058 Rev. C

DATA SHEET • SMV1232–SMV1237

Part CJO VJCPRS

Number (pF) (V) M (pF) (ΩΩ)

SMV1232 4.20 1.7 0.9 0.0 1.50

SMV1233 4.12 1.7 0.9 0.7 1.20

SMV1234 8.75 2.3 1.1 1.2 0.80

SMV1235 16.13 8.0 4.0 2.0 0.60

SMV1236 21.63 8.0 4.2 3.2 0.50

SMV1237 66.16 10.0 5.3 9.0 0.25

Typical Capacitance Values

SPICE Model

SMV1232 SMV1233 SMV1234 SMV1235 SMV1236 SMV1237

VR(V) CT(pF) CT(pF) CT(pF) CT(pF) CT(pF) CT(pF)

0.0 4.15 5.08 9.63 18.22 26.75 71.82

0.5 3.22 3.95 7.53 14.12 20.61 56.10

1.0 2.67 3.28 6.28 11.67 17.02 46.89

1.5 2.28 2.80 5.39 9.91 14.38 40.33

2.0 1.97 2.41 4.68 8.52 12.29 35.13

2.5 1.72 2.09 4.09 7.36 10.56 30.71

3.0 1.51 1.82 3.58 6.40 9.16 26.87

3.5 1.35 1.62 3.15 5.62 8.04 23.57

4.0 1.22 1.45 2.81 4.99 7.19 20.83

4.5 1.13 1.33 2.54 4.50 6.53 18.62

5.0 1.05 1.24 2.32 4.11 6.01 16.87

5.5 0.99 1.16 2.15 3.80 5.61 15.48

6.0 0.94 1.10 2.02 3.55 5.28 14.36

6.5 0.90 1.05 1.90 3.34 5.02 13.46

7.0 0.86 1.01 1.80 3.17 4.81 12.72

7.5 0.84 0.98 1.72 3.03 4.64 12.11

8.0 0.81 0.96 1.65 2.91 4.49 11.61

9.0 0.78 0.92 1.55 2.73 4.28 10.87

10.0 0.76 0.90 1.47 2.61 4.13 10.38

11.0 0.75 0.88 1.42 2.53 4.02 10.06

12.0 0.74 0.87 1.38 2.47 3.95 9.84

13.0 0.73 0.86 1.35 2.43 3.89 9.68

14.0 0.73 0.85 1.33 2.40 3.84 9.56

15.0 0.72 0.84 1.32 2.38 3.80 9.47

DIODE

Varactor_Diode

AREA = 1

MODEL = Diode_Model

MODE = nonlinear

RES

R = RS

IND

L = LS

CAP

C = CP

PORT

P_anode

port = 1

PORT

P_Cathode

port = 2

DIODEM

Diode_Model

IS = 1.00e-14

RS = 0

N = 1

TT = 0

CJO = CJO

M = M

VJ = VJ

EG = 1.11

XTI = 3

KF =0

AF =1

FC = 0.5

BV = 0

IBV = 1e-3

ISR = 0

NR = 2

IKF = 0

NBV = 1

IBVL = 0

NBVL = 1

TBV1 = 0

TNOM = 27

FFE = 1

1. Values extracted from measured performance.

2. For package inductance (LS) refer to package type.

3. For more details refer to the “Varactor SPICE Models for RF VCO Applications”

Application Note.

DATA SHEET • SMV1232–SMV1237

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200058 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • November 9, 2004 5

Profile Feature SnPb Eutectic Assembly Lead (Pb)-Free Assembly 100% Sn

Average ramp-up rate (TLto TP) 3 °C/second max. 3 °C/second max.

Preheat

Temperature min. (TSMIN) 100 °C 150 °C

Temperature max. (TSMAX) 150 °C 200 °C

Time (min. to max.) (ts) 60–120 seconds 60–80 seconds

TSMAX to TL

Ramp-up rate — 3 °C/second max.

Time maintained above:

Temperature (TL) 183 °C 217 °C

Time (tL) 60–150 seconds 60–150 seconds

Peak temperature (TP) 240 +0/-5 °C 250 +0/-5 °C

Time within 5 °C of actual peak temperature (tp) 10–30 seconds 20–40 seconds

Ramp-down rate 6 °C/second max. 6 °C/second max.

Time 25 °C to peak temperature 6 minutes max. 8 minutes max.

Recommended Solder Reflow Profiles

TSMAX

TSMIN

Preheat

Critical Zone

TL to TL

t 25 ˚C to Peak

Time

Temperature

25 ˚C

Reference JEDEC J-STD-020

All temperatures refer to the topside of the package, measured on the package body surface.

Reference JEDEC J-STD-020B.

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

November 9, 2004 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200058 Rev. C

DATA SHEET • SMV1232–SMV1237

SOT-23

0.035 (0.89 mm) Min.

0.044 (1.12 mm) Max.

0.0005 (0.01 mm) Min.

0.004 (0.10 mm) Max.

0.012 (0.30 mm) Min.

0.020 (0.50 mm) Max.

0.003 (0.080 mm) Min.

0.008 (0.20 mm) Max.

8˚ Max.

0.022 (0.55 mm) Ref.

0.110 (2.80 mm) Min.

0.120 (3.04 mm) Max.

0.083 (2.10 mm) Min.

0.104 (2.64 mm) Max.

0.037 (0.95 mm) Ref.

0.047 (1.20 mm) Min.

0.055 (1.40 mm) Max.

0.076 (1.92 mm) Ref.

0.020 (0.51 mm) Ref.

SOD-323

0.090 (2.30 mm) Min.

0.108 (2.74 mm) Max.

0.045 (1.15 mm) Min.

0.053 (1.35 mm) Max.

0.050

(1.25 mm) Max.

0.006

(0.15 mm) Typ.

0.008 (0.20 mm) Nom.

0.004 (0.10 mm) Max.

0.010 (0.25 mm) Min.

0.010

(0.25 mm) Min.

0.016

(0.40 mm) Max.

0.063 (1.60 mm) Min.

0.071 (1.80 mm) Max.

Cathode

Indicator

SC-79

0.060 (1.50 mm) Min.

0.067 (1.70 mm) Max.

0.010

(0.25 mm) Min.

0.014

(0.35 mm) Max.

0.043 (1.10 mm) Min.

0.051 (1.30 mm) Max.

0.020

(0.50 mm) Min.

0.028

(0.70 mm) Max.

0.003

(0.07 mm) Min.

0.008

(0.20 mm) Max.

10˚ Max.

0.028

(0.70 mm) Min.

0.035

(0.90 mm) Max.

0.006 (0.15 mm) Min.

Cathode

Indicator

SC-70

0.031 (0.80 mm) Min.

0.039 (1.00 mm) Max.

0.000 (0.00 mm) Min.

0.004 (0.10 mm) Max.

0.010 (0.25 mm) Min.

0.016 (0.40 mm) Max.

0.071 (1.80 mm) Min.

0.087 (2.20 mm) Max.

0.071 (1.80 mm) Min.

0.094 (2.40 mm) Max.

0.045 (1.15 mm) Min.

0.053 (1.35 mm) Max.

0.026 (0.65 mm) Ref.

0.051 (1.30 mm) Ref.

0.004 (0.10 mm) Min.

0.007 (0.18 mm) Max.

0.004 (0.10 mm) Min.

0.012 (0.30 mm) Max.

0.014 (0.35 mm) Ref.

DATA SHEET • SMV1232–SMV1237

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200058 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • November 9, 2004 7

Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products. These materials are provided by Skyworks as a service to its customers and may be

used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials. Skyworks may make changes to its documentation, products,

specifications and product descriptions at any time, without notice. Skyworks makes no commitment to update the information and shall have no responsibility whatsoever for conflicts,

incompatibilities, or other difficulties arising from future changes to its documentation, products, specifications and product descriptions.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by or under this document. Except as may be provided in Skyworks Terms and Conditions of

Sale for such products, Skyworks assumes no liability whatsoever in association with its documentation, products, specifications and product descriptions.

THESE MATERIALS ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED OR OTHERWISE, RELATING TO SALE AND/OR USE OF SKYWORKS PRODUCTS INCLUDING

WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL

PROPERTY RIGHT. SKYWORKS FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS.

SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST

PROFITS THAT MAY RESULT FROM THE USE OF THESE MATERIALS WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications. Skyworks customers using or selling Skyworks products for use in such applications do so at their

own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale.

The following are trademarks of Skyworks Solutions, Inc.: Skyworks™, the Skyworks logo, and Breakthrough Simplicity™. Product names or services listed in this publication are for identification

purposes only, and may be trademarks of Skyworks or other third parties. Third-party brands and names are the property of their respective owners. Additional information, posted at