DATA SH EET
Product data sheet
Supersedes data of 2001 Jan 26 2001 Sep 21
DISCRETE SEMICONDUCTORS
PBSS5540Z
40 V low VCEsat PNP transistor
fpa
ge
M3D087
2001 Sep 21 2
NXP Semiconductors Product data sheet
40 V low VCEsat PNP transistor PBSS5540Z
FEATURES
Low collector-emitter saturation voltage
High current capability
Improved device reliability due to reduced heat
generation.
APPLICATIONS
Supply line switching circuits
Battery manageme nt applications
DC/DC converter applications
Strobe flash units
Heavy duty battery powered equipment (motor and lamp
drivers)
MOSFET driver applications.
DESCRIPTION
PNP low VCEsat transistor in a SOT223 plastic pack age.
NPN complement: PBSS4540Z.
MARKING
TYPE NUMBER MARKING CODE
PBSS5540Z PB5540
PINNING
PIN DESCRIPTION
1base
2collector
3emitter
4collector
handbook, halfpage
4
123
MAM288
Top view
3
2, 4
1
Fig.1 Simplified outline (SOT223) and symbol.
QUICK REFERENCE DATA
SYMBOL PARAMETER MAX UNIT
VCEO emitter-collector voltage 40 V
ICcollector current (DC) 5 A
ICM peak collector current 10 A
RCEsat equivalent on-resistance <80 mΩ
2001 Sep 21 3
NXP Semiconductors Pr oduct dat a shee t
40 V low VCEsat PNP transistor PBSS5540Z
LIMITING VALUES
In accordance with the Absolute Maximum Ratin g S ystem (IEC 60134).
Notes
1. Device mounted on a pr inted-circuit board, single-sided copper, tinplate d, mounting pad for collector 1 cm2.
2. Device mounted on a pr inted-circuit board, single-sided copper, tinplate d, mounting pad for collector 6 cm2.
For other mounting condition s, see “Thermal considerations for SOT223 in the General Pa rt of as sociated
Handbook”.
THERMAL CHARACTE RISTICS
Note
1. Device mounted on a pr inted-circuit board, single-sided copper, tinplate d, mounting pad for collector 1 cm2.
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
VCBO collector-base volt a ge open emitter 40 V
VCEO collector-emitter voltage open base 40 V
VEBO emitter-base voltage open collector 6 V
ICcollector current (DC) 5 A
ICM peak collector current 10 A
IBM peak base current 2 A
Ptot total power dissipation Tamb 25 °C; note 1 1.35 W
Tamb 25 °C; note 2 2 W
Tstg storage temperature 65 +150 °C
Tjjunction temperature 150 °C
Tamb operating ambient temperature 65 +150 °C
SYMBOL PARAMETER CONDITIONS VALUE UNIT
Rth j-a thermal resistance from junction to
ambient in free air; note 1 92 K/W
2001 Sep 21 4
NXP Semiconductors Pr oduct dat a shee t
40 V low VCEsat PNP transistor PBSS5540Z
CHARACTERISTICS
Tamb = 25 °C unless otherwise specified.
Note
1. Pulse test: tp 300 μs; δ 0.02.
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
ICBO collector-base cut-off current VCB = 30 V; IE = 0 −−−100 nA
VCB = 30 V; IE = 0; Tj = 150 °C−−−50 μA
IEBO emitter-base cu t-off current VEB = 5 V; IC = 0 −−−100 nA
hFE DC current gain VCE = 2 V; IC = 500 mA 250 350
VCE = 2 V; IC = 1 A; note 1 200 300
VCE = 2 V; IC = 2 A; note 1 150 250
VCE = 2 V; IC = 5 A; note 1 50 150
VCEsat collector-emitter saturation voltage IC = 500 mA; IB = 5 mA 80 120 mV
IC = 1 A; IB = 10 mA 120 170 mV
IC = 2 A; IB = 200 mA 110 160 mV
RCEsat equivalent on-resistance IC = 2 A; IB = 200 mA; note 1 <55 <80 mΩ
VCEsat collector-emitter saturation voltage IC = 5 A; IB = 500 mA 250 375 mV
VBEsat base-emitt er saturatio n voltage IC = 5 A; IB = 500 mA −−−1.3 V
VBEon base-emitter turn-on voltage VCE = 2 V; IC = 2 A 0.8 1.25 V
fTtransition frequen c y IC = 100 mA; VCE = 10 V;
f = 100 MHz 60 120 MHz
Cccollector capacitance VCB = 10 V; IE = Ie = 0;
f = 1 MHz 90 105 pF
2001 Sep 21 5
NXP Semiconductors Pr oduct dat a shee t
40 V low VCEsat PNP transistor PBSS5540Z
handbook, halfpage
0
1000
200
400
600
800
MGU391
1
hFE
IC (mA)
10 102103104
(1)
(2)
(3)
Fig.2 DC current gain as a fu nction of collector
current; ty pical values.
VCE = 2 V.
(1) Tamb = 150 °C.
(2) Tamb = 25 °C.
(3) Tamb = 55 °C.
handbook, halfpage
0
1.2
0.4
0.8
MGU393
10
1
110 10
2
10
3
10
4
IC (mA)
VBE
(V)
(1)
(2)
(3)
Fig.3 Base-emitter voltage as a function of
collector current; typical values.
VCE = 2 V.
(1) Tamb = 150 °C.
(2) Tamb = 25 °C.
(3) Tamb = 55 °C.
handbook, halfpage
103
102
10
1
101
MGU395
110 IC (mA)
VCEsat
(mV)
102103104
(1)
(3)
(2)
Fig.4 Collector-emitter saturation voltage as a
function of collector current; typical values.
IC/IB = 20.
(1) Tamb = 150 °C.
(2) Tamb = 25 °C.
(3) Tamb = 55 °C.
handbook, halfpage
0
1.2
0.4
0.8
MGU394
10
1
110 10
2
10
3
10
4
IC (mA)
VBEsat
(V)
(1)
(2)
(3)
Fig.5 Base-emitter saturation v oltage as a
function of collector current; typical values.
IC/IB = 20.
(1) Tamb = 150 °C.
(2) Tamb = 25 °C.
(3) Tamb = 55 °C.
2001 Sep 21 6
NXP Semiconductors Pr oduct dat a shee t
40 V low VCEsat PNP transistor PBSS5540Z
handbook, halfpage
0
IC
(A)
VCE (V)
2
10
0
2
4
6
8
0.4 0.8 1.2 1.6
MGU392
(10)
(9)
(8)
(7)
(6)
(5)
(4)
(3)
(2)
(1)
Fig.6 Collector current as a function of
collector-emitter voltage; typical values.
(1) IB = 150 mA.
(2) IB = 135 mA.
(3) IB = 120 mA.
(4) IB = 105 mA.
(5) IB = 90 mA.
(6) IB = 75 mA.
(7) IB = 60 mA.
(8) IB = 45 mA.
(9) IB = 30 mA.
(10) IB = 15 mA.
Tamb = 25 °C.
handbook, halfpage
103
102
10
1
101
101
MGU396
110 IC (mA)
RCEsat
(Ω)
102103104
(1)
(3) (2)
Fig.7 Collector-emitter equivale nt on-resistance
as a function of collector current; typical
values.
IC/IB = 20.
(1) Tamb = 150 °C.
(2) Tamb = 25 °C.
(3) Tamb = 55 °C.
2001 Sep 21 7
NXP Semiconductors Pr oduct dat a shee t
40 V low VCEsat PNP transistor PBSS5540Z
PACKAGE OUTLINE
UNIT A1bpcDEe1HELpQywv
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC EIAJ
mm 0.10
0.01
1.8
1.5 0.80
0.60
b1
3.1
2.9 0.32
0.22 6.7
6.3 3.7
3.3 2.3
e
4.6 7.3
6.7 1.1
0.7 0.95
0.85 0.1 0.10.2
DIMENSIONS (mm are the original dimensions)
SOT223 SC-73 97-02-28
99-09-13
wM
bp
D
b1
e1
e
A
A1
Lp
Q
detail X
HE
E
vMA
AB
B
c
y
0 2 4 mm
scale
A
X
132
4
P
lastic surface mounted package; collector pad for good heat transfer; 4 leads SOT22
3
2001 Sep 21 8
NXP Semiconductors Pr oduct dat a shee t
40 V low VCEsat PNP transistor PBSS5540Z
DATA SHEET STATUS
Notes
1. Please consult the most rec en tly issued document before initiating or co mpleting a design.
2. The product s tatus of device(s ) described in this document may have changed since this do cument was published
and may differ in case of multiple devices. The latest product status information is available on the Internet at
URL http://www.nxp.com.
DOCUMENT
STATUS(1) PRODUCT
STATUS(2) DEFINITION
Objective data sheet Development This document contains data from the objective specification for pro duct
development.
Preliminary data sheet Qualification This document contains data from the preliminary specification.
Product data sheet Production T his document contains the produc t specification.
DISCLAIMERS
General Information in this document is believed to be
accurate and reliable . H ow ev er, NXP Semiconductors
does not give any representations or warranties,
expressed or implied, as to the accuracy or completeness
of such information and shall have no liability for the
consequenc es of use of such informa tion.
Right to make changes NXP Semiconductors
reserves the right to make changes to information
published in this doc ument, including without limitation
specifications and product descriptions, at any time and
without notice. This document supersedes and replaces all
information supplied prior to the publication hereo f.
Suitability for use NXP Semiconductors products are
not designed, au thorized or warranted to be suitable for
use in medical, military, aircraft, space or life support
equipment, nor in applications where failure or malfunction
of an NXP Semiconductors product can reasonably be
expected to result in pe rs onal injury, death or seve re
property or environmental damage. NXP Semiconductors
accepts no liability for inclusion and/or use of NXP
Semiconductors products in such equipment or
applications and therefor e s uc h inclusion and/or use is at
the customer’s own risk .
Applications Applications that are described herein for
any of these products are for illustrative purposes only.
NXP Semiconductors makes no representation or
warranty that such applications will be suitable for the
specified use witho ut fu rth e r testing or modificati on .
Limiting values Stress above one or more limiting
values (as defined in the Absolute Maximum Ratings
System of IEC 60134) may cause permanent damage to
the device. Limiting values are stress ratings only and
operation of the device at these or any other conditions
above those given in the Characteristics sections of this
document is not implied. Exposure to limiting values for
extended periods may affect device reliability.
Terms and conditions of sale NXP Semiconductors
products are sold subject to the general terms and
conditions of commercial sale, as published at
http://www.nxp.com/profile/terms, including those
pertaining to warranty, intellectual property rights
infringement and limitation of liability, unless explicitly
otherwise agreed to in writing by NXP Semiconductors. In
case of any incons istency or conflict between information
in this document an d such terms and conditio ns, the latter
will prevail.
No offer to sell or license Nothing in this document
may be interpreted or construed as an offer to sell products
that is open for accept ance or the grant, c onv eyance or
implication of any license under any copyrights, patents or
other industr i al or inte llectual property rights.
Export control This document as well as the item(s)
described herein may be subject to export control
regulations. Export might require a prior authorization from
national author ities.
Quick refer ence data The Quick reference data is an
extract of th e product data given in the Limiting values and
Characteristics sections of this document, and as such is
not complete, exhaus tive or legally binding.
NXP Semiconductors
Contact information
For additional information p lease visit: http://www.nxp.com
For sales offices addresses send e-mail to: salesaddresses@nxp.com
© NXP B.V. 2009
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information pr e sent ed in this documen t d oes not form part o f an y q uot ation or co nt ract, is believed to be a ccur ate a nd re li a ble and may be chan ged
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual pr operty righ ts.
Customer notification
This data sheet was changed to reflect the new company name NXP Semicon ductors. No changes were
made to the content, except for the legal definitions and disclaimer s.
Printed in The Netherlands 613514/04/pp9 Date of release: 2001 Sep 21 Document orde r number: 9397 750 08434