1.0 (25.4)
MIN.
1.0 (25.4)
MIN.
0.375 (9.5)
0.285 (7.2)
0.210 (5.3)
0.190 (4.8)
DIA.
0.042 (1.07)
0.038 (0.96)
DIA.
Devices for Bidirectional Applications
For bi-directional, use C or CA suffix for types 1.5KE6.8 thru types 1.5KE440
(e.g. 1.5KE6.8C, 1.5KE440CA). Electrical characteristics apply in both directions.
Maximum Ratings and Characteristics (TA= 25°C unless otherwise noted)
Parameter Symbol Limit Unit
Peak power dissipation with a 10/1000µs waveform(1) (Fig. 1) PPPM Minimum 1500 W
Peak pulse current wih a 10/1000µs waveform(1) IPPM See Next Table A
Steady state power dissipation PM(AV) 6.5 W
at TL= 75OC, lead lengths 0.375” (9.5mm)(2)
Peak forward surge current, 8.3ms IFSM 200 A
single half sine-wave unidirectional only(3)
Maximum instantaneous forward voltage VF3.5/5.0 V
at 100A for unidirectional only(4)
Typical thermal resistance junction-to-lead RθJL 20 °C/W
Typical thermal resistance junction-to-ambient RθJA 75 °C/W
Operating junction and storage temperature range TJ, TSTG 55 to +175 OC
Notes: (1) Non-repetitive current pulse, per Fig.3 and derated above TA= 25°C per Fig. 2
(2) Mounted on copper pad area of 1.6 x 1.6” (40 x 40mm) per Fig. 5
(3) Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
(4) VF = 3.5V for devices of V(BR) < 220V, and VF = 5.0 Volt max. for devices of V(BR) > 220V 12/18/00
Dimensions in inches
and (millimeters)
Case Style 1.5KE
1.5KE6.8 thru 1.5KE440CA
and 1N6267 thru 1N6303A
TRANSZORB®Transient Voltage Suppressors
Peak Pulse Power 1500W
Breakdown Voltage 6.8 to 440V
Features
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• Glass passivated junction
• 1500W peak pulse power capabililty on 10/1000µs
waveform, repetition rate (duty cycle): 0.05%
• Excellent clamping capability
• Low incremental surge resistance
• Very fast response time
High temperature soldering guaranteed: 265OC/10 seconds,
0.375” (9.5mm) lead length, 5lbs. (2.3 kg) tension
• Includes 1N6267 thru 1N6303A
Mechanical Data
Case: Molded plastic body over passivated junction
Terminals: Plated axial leads, solderable per MIL-STD-
750, Method 2026
Polarity: For unidirectional types the color band denotes
the cathode, which is positive with respect to the anode
under normal TVS operation
Mounting Position: Any Weight: 0.045oz., 1.2g
Packaging Codes – Options (Antistatic):
51 – 1K per Bulk box, 10K/carton
54 – 1.4K per 13” paper Reel
(52mm horiz. tape), 4.2K/carton
73 – 1K per horiz. tape & Ammo box, 10K/carton
Electrical Characteristics (TA= 25°C unless otherwise noted)
Breakdown Voltage Maximum Maximum Maximum Maximum
General V(BR) Test Stand-off Reverse Peak Pulse Clamping Temp.
JEDEC Semiconductor (V)(1) Current Voltage Leakage Current Voltage Coefficient
Type Part at VWM at VWM IPPM(2) at IPPM of V(BR)
Number Number Min Max IT(mA) (V) ID(4) (µA) (A) VC (V) (% / °C)
1N6267 +1.5KE6.8 6.12 7.48 10 5.50 1000 139 10.8 0.057
1N6267A +1.5KE6.8A 6.45 7.14 10 5.80 1000 143 10.5 0.057
1N6268 +1.5KE7.5 6.75 8.25 10 6.05 500 128 11.7 0.061
1N6268A +1.5KE7.5A 7.13 7.88 10 6.40 500 133 11.3 0.061
1N6269 +1.5KE8.2 7.38 9.02 10 6.63 200 120 12.5 0.065
1N6269A +1.5KE8.2A 7.79 8.61 10 7.02 200 124 12.1 0.065
1N6270 +1.5KE9.1 8.19 10.0 1.0 7.37 50 109 13.8 0.068
1N6270A +1.5KE9.1A 8.65 9.55 1.0 7.78 50 112 13.4 0.068
1N6271 +1.5KE10 9.00 11.0 1.0 8.10 10 100 15.0 0.073
1N6271A +1.5KE10A 9.50 10.5 1.0 8.55 10 103 14.5 0.073
1N6272 +1.5KE11 9.90 12.1 1.0 8.92 5.0 92.6 16.2 0.075
1N6272A +1.5KE11A 10.5 11.6 1.0 9.40 5.0 96.2 15.6 0.075
1N6273 +1.5KE12 10.8 13.2 1.0 9.72 5.0 86.7 17.3 0.076
1N6273A +1.5KE12A 11.4 12.6 1.0 10.2 5.0 89.8 16.7 0.078
1N6274 +1.5KE13 11.7 14.3 1.0 10.5 5.0 78.9 19.0 0.081
1N6274A +1.5KE13A 12.4 13.7 1.0 11.1 5.0 82.4 18.2 0.081
1N6275 +1.5KE15 13.5 16.5 1.0 12.1 1.0 68.2 22.0 0.084
1N6275A +1.5KE15A 14.3 15.8 1.0 12.8 1.0 70.8 21.2 0.084
1N6276 +1.5KE16 14.4 17.6 1.0 12.9 1.0 63.8 23.5 0.086
1N6276A +1.5KE16A 15.2 16.8 1.0 13.6 1.0 66.7 22.5 0.086
1N6277 +1.5KE18 16.2 19.8 1.0 14.5 1.0 56.6 26.5 0.088
1N6277A +1.5KE18A 17.1 18.9 1.0 15.3 1.0 59.5 25.2 0.089
1N6278 +1.5KE20 18.0 22.0 1.0 16.2 1.0 51.5 29.1 0.090
1N6278A +1.5KE20A 19.0 21.0 1.0 17.1 1.0 54.2 27.7 0.090
1N6279 +1.5KE22 19.8 24.2 1.0 17.8 1.0 47.0 31.9 0.092
1N6279A +1.5KE22A 20.9 23.1 1.0 18.8 1.0 49.0 30.6 0.092
1N6280 +1.5KE24 21.6 26.4 1.0 19.4 1.0 43.2 34.7 0.094
1N6280A +1.5KE24A 22.8 25.2 1.0 20.5 1.0 45.2 33.2 0.094
1N6281 +1.5KE27 24.3 29.7 1.0 21.8 1.0 38.4 39.1 0.096
1N6281A +1.5KE27A 25.7 28.4 1.0 23.1 1.0 40.0 37.5 0.096
1N6282 +1.5KE30 27.0 33.0 1.0 24.3 1.0 34.5 43.5 0.097
1N6282A +1.5KE30A 28.5 31.5 1.0 25.6 1.0 36.2 41.4 0.097
1N6283 +1.5KE33 29.7 36.3 1.0 26.8 1.0 31.4 47.7 0.098
1N6283A +1.5KE33A 31.4 34.7 1.0 28.2 1.0 32.8 45.7 0.098
1N6284 +1.5KE36 32.4 39.6 1.0 29.1 1.0 28.8 52.0 0.099
1N6284A +1.5KE36A 34.2 37.8 1.0 30.8 1.0 30.1 49.9 0.099
1N6285 +1.5KE39 35.1 42.9 1.0 31.6 1.0 26.6 56.4 0.100
1N6285A +1.5KE39A 37.1 41.0 1.0 33.3 1.0 27.8 53.9 0.100
1N6286 +1.5KE43 38.7 47.3 1.0 34.8 1.0 24.2 61.9 0.101
1N6286A +1.5KE43A 40.9 45.2 1.0 36.8 1.0 25.3 59.3 0.101
1N6287 +1.5KE47 42.3 51.7 1.0 38.1 1.0 22.1 67.8 0.101
1N6287A +1.5KE47A 44.7 49.4 1.0 40.2 1.0 23.1 64.8 0.101
1N6288 1.5KE51 45.9 56.1 1.0 41.3 1.0 20.4 73.5 0.102
1N6288A 1.5KE51A 48.5 53.6 1.0 43.6 1.0 21.4 70.1 0.102
1N6289 1.5KE56 50.4 61.8 1.0 45.4 1.0 18.6 80.5 0.103
1N6289A 1.5KE56A 53.2 58.8 1.0 47.8 1.0 19.5 77.0 0.103
1N6290 1.5KE62 55.8 68.2 1.0 50.2 1.0 16.9 89.0 0.104
1N6290A 1.5KE62A 58.9 65.1 1.0 53.0 1.0 17.6 85.0 0.104
1N6291 1.5KE68 61.2 74.8 1.0 55.1 1.0 15.3 98.0 0.104
1.5KE6.8 thru 1.5KE440CA
and 1N6267 thru 1N6303A
TRANSZORB®Transient Voltage Suppressors
Electrical Characteristics (Cont’d) (TA= 25°C unless otherwise noted)
Breakdown Voltage Maximum Maximum Maximum Maximum
General V(BR) Test Stand-off Reverse Peak Pulse Clamping Temp.
JEDEC Semiconductor (V)(1) Current Voltage Leakage Current Voltage Coefficient
Type Part at VWM at VWM IPPM(2) at IPPM of V(BR)
Number Number Min Max IT(mA) (V) ID(4) (µA) (A) VC (V) (% / °C)
1N6291A 1.5KE68A 64.6 71.4 1.0 58.1 1.0 16.3 92.0 0.104
1N6292 1.5KE75 67.5 82.5 1.0 60.7 1.0 13.9 109 0.105
1N6292A 1.5KE75A 71.3 78.8 1.0 64.1 1.0 14.6 104 0.105
1N6293 1.5KE82 73.8 90.2 1.0 66.4 1.0 12.7 118 0.105
1N6293A 1.5KE82A 77.9 86.1 1.0 70.1 1.0 13.3 113 0.105
1N6294 1.5KE91 81.9 100.0 1.0 73.7 1.0 11.5 131 0.106
1N6294A 1.5KE91A 86.5 95.5 1.0 77.8 1.0 12.0 125 0.106
1N6295 1.5KE100 90.0 110 1.0 81.0 1.0 10.4 144 0.106
1N6295A 1.5KE100A 95.0 105 1.0 85.5 1.0 10.9 137 0.106
1N6296 1.5KE110 99.0 121 1.0 89.2 1.0 9.5 158 0.107
1N6296A 1.5KE 110A 105 116 1.0 94.0 1.0 9.9 152 0.107
1N6297 1.5KE120 108 132 1.0 97.2 1.0 8.7 173 0.107
1N6297A 1.5KE120A 114 126 1.0 102 1.0 9.1 165 0.107
1N6298 1.5KE130 117 143 1.0 105 1.0 8.0 187 0.107
1N6298A 1.5KE130A 124 137 1.0 111 1.0 8.4 179 0.107
1N6299 1.5KE150 136 165 1.0 121 1.0 7.0 215 0.108
1N6299A 1.5KE150A 143 158 1.0 128 1.0 7.2 207 0.106
1N6300 1.5KE160 144 176 1.0 130 1.0 6.5 230 0.106
1N6300A 1.5KE160A 152 168 1.0 136 1.0 6.8 219 0.108
1N6301 1.5KE170 153 187 1.0 138 1.0 6.1 244 0.108
1N6301A 1.5KE170A 162 179 1.0 145 1.0 6.4 234 0.108
1N6302 1.5KE180 162 198 1.0 146 1.0 5.8 258 0.108
1N6302A 1.5KE180A 171 189 1.0 154 1.0 6.1 246 0.108
1N6303 1.5KE200 180 220 1.0 162 1.0 5.2 287 0.108
1N6303A 1.5KE200A* 190 210 1.0 171 1.0 5.5 274 0.108
1.5KE220 198 242 1.0 175 1.0 4.4 344 0.108
1.5KE220A* 209 231 1.0 185 1.0 4.6 328 0.108
1.5KE250 225 275 1.0 202 1.0 4.2 360 0.110
1.5KE250A 237 263 1.0 214 1.0 4.4 344 0.110
1.5KE300 270 330 1.0 243 1.0 3.5 430 0.110
1.5KE300A 285 315 1.0 256 1.0 3.6 414 0.110
1.5KE350 315 385 1.0 284 1.0 3.0 504 0.110
1.5KE350A 333 368 1.0 300 1.0 3.1 482 0.110
1.5KE400 360 440 1.0 324 1.0 2.6 574 0.110
1.5KE400A 380 420 1.0 342 1.0 2.7 548 0.110
1.5KE440 396 484 1.0 356 1.0 2.4 631 0.110
1.5KE440A 418 462 1.0 376 1.0 2.5 602 0.110
Notes: (1) V(BR) measured after ITapplied for 300µs, IT=square wave pulse or equivalent
(2) Surge current waveform per Fig. 3 and derate per Fig. 2
(3) All terms and symbols are consistent with ANSI/IEEE CA62.35
(4) For bidirectional types with VR10 volts and less the IDlimit is doubled
* Bidirectional versions are UL approved under component across the line protection, ULV1414 file number E108274 (1.5KE200CA, 1.5KE220CA)
+ UL listed for Telecom applications protection, 497B, file number E136766 for both uni-directional and bi-directional devices
Application
• This series of Silicon Transient Suppressors is used in applications where large voltage transients can permanently damage voltage-sensitive components.
• The TVS diode can be used in applications where induced lightning on rural or remote transmission lines presents a hazard to electronic circuitry
(ref: R.E.A. specification P.E. 60).
• This Transient Voltage Suppressor diode has a pulse power rating of 1500 watts for one millisecond. The response time of TVS diode clamping action is
effectively instantaneous (1 x 10-9 seconds bidirectional); therefore, they can protect integrated circuits, MOS devices, hybrids, and other voltage sensitive
semiconductors and components. TVS diodes can also be used in series or parallel to increase the peak power ratings.
1.5KE6.8 thru 1.5KE440CA
and 1N6267 thru 1N6303A
TRANSZORB®Transient Voltage Suppressors
050 100 150 200
0
25
50
75
100
25 75 125 175
510 100 500
10
100
1,000
10,000
110 100
10
100
200
025 50 75 100 125 150 175 200
0
1.0
2.0
3.0
5.0
4.0
6.0
8.0
7.0
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage, %
TA Ambient Temperature (°C)
Fig. 2 Pulse Derating Curve
Fig. 4 - Typical Junction Capacitance
Fig. 6 - Maximum Non-repetitive Peak Forward
Surge Current Unidirectional Only
CJ, Capacitance, pF
V(BR), Breakdown Voltage (V)
Unidirectional
Bidirectional
8.3ms Single Half Sine-Wave
(JEDEC Method) TJ = TJ max.
PM(AV), Steady State Power
Dissipation (W)
Fig. 5 Steady State Power
Derating Curve
TL Lead Temperature (°C)
L = 0.375" (9.5mm)
Lead Lengths
1.6 x 1.6 x .040"
(40 x 40 x 1mm)
Copper Heat Sinks
Peak Forward Surge Current (A)
Number of Cycles at 60 Hz
VR = Rated
Stand-off Voltage
VR = 0
f = 1 MHz
Vsig = 50mVp-p
TJ = 25°C
60 Hz
Resistive or
Inductive Load
0
50
100
150
IPPM Peak Pulse Current, % IRSM
Fig. 3 Pulse Waveform
TJ = 25°C
Pulse Width (td)
is defined as the point
where the peak current
decays to 50% of IPPM
tr = 10µsec.
Peak Value
IPPM
Half Value IPP
IPPM 2
td
10/1000µsec. Waveform
as defined by R.E.A.
01.0 2.0 3.0 4.0
t Time (ms)
PPPM Peak Pulse Power (kW)
Fig. 1 Peak Pulse Power Rating Curve
0.1
1
10
100
0.1µs 1.0µs10µs
td Pulse Width (sec.)
100µs 1.0ms 10ms
Ratings and
Characteristic Curves (TA= 25°C unless otherwise noted)
1.5KE6.8 thru 1.5KE440CA
and 1N6267 thru 1N6303A
TRANSZORB®Transient Voltage Suppressors
Ratings and
Characteristic Curves (TA= 25°C unless otherwise noted)
0.5 12.0 10 50
0.1
0.2
1.0
2.0
10
20
100
0.5 12.0 10 20 50
0.1
0.2
1.0
2.0
10
20
100
0.5 12.0 10 20 50
0.1
0.2
1.0
2.0
10
20
100
0.5 12.0 10 20 50
0.1
0.2
1.0
2.0
10
20
100
Fig. 7 Incremental Clamping Voltage
Curve (Unidirectional)
VC, Incremental Clamping Voltage
IPP, Peak Pulse Current (A)
Fig. 7 Incremental Clamping Voltage
Curve (Bidirectional)
VC, Incremental Clamping Voltage
IPP, Peak Pulse Current (A)
Fig. 8 Incremental Clamping Voltage
Curve (Unidirectional)
VC, Incremental Clamping Voltage
IPP, Peak Pulse Current (A)
Fig. 10 Incremental Clamping Voltage
Curve (Bidirectional)
VC, Incremental Clamping Voltage
IPP, Peak Pulse Current (A)
Waveform:
8 x 20 Impulse
VC = VC - V(BR)
Waveform:
10 x 100 Impulse
VC = VC - V(BR)
1.5KE200
1.5KE130
1.5KE100
1.5KE75
1.5KE39
1.5KE33
1.5KE6.8
1.5KE9.1
1.5KE200
1.5KE130
1.5KE75
1.5KE39
1.5KE33
Waveform:
10 x 100 Impulse
VC = VC - V(BR) 1.5KE200C
1.5KE75C
1.5KE39C
1.5KE15C
1.5KE11C
1.5KE7.5C
1.5KE30C
Waveform:
8 x 20 Impulse
VC = VC - V(BR)
1.5KE200C
1.5KE75C
1.5KE39C
1.5KE15C
11C
1.5KE7.5C
1.5KE30C
1.5KE6.8
1.5KE9.1
1.5KE18
1.5KE12
1.5KE6.8 thru 1.5KE440CA
and 1N6267 thru 1N6303A
TRANSZORB®Transient Voltage Suppressors
510 20 50 100 200 500
1
10
100
1,000
00.4 0.8 1.2 1.6 2.0
0.1
1
10
100
Fig. 11 Instantaneous Forward Voltage
Characteristics Curve
Forward Current
Instantaneous Forward Current (A)
Fig. 12 Breakdown Voltage Temperature
Coefficient Curve
ΘV Temperature Coefficient (mV/°C)
V(BR), Breakdown Voltage (V)
Pulse width = 300µs
1% Duty Cycle
TJ = 25°C
Unidirectional
Bidirectional
Transient Thermal Impedance (°C/W)
10
100
1
0.1
0.001
tp Pulse Duration (sec)
0.01 0.1 1 10 100 1000
Fig. 13 Typical Transient
Thermal Impedance
Ratings and
Characteristic Curves (TA= 25°C unless otherwise noted)
1.5KE6.8 thru 1.5KE440CA
and 1N6267 thru 1N6303A
TRANSZORB®Transient Voltage Suppressors