YAGEO CORPORATION ELECTROLYTIC CAPACITORS
Miniature Aluminum
Electrolytic Capacitors SC
105°C Single-Ended Lead Aluminum Electrolytic Capacitors For
High Frequency Applications
[ Low Impedance and Low ESR Suitable
for Motherboard Output Termination ]
DESCRIPTION
Applicable for switching regulator of compurters,
especially for high frequency
MULTIPLIER FOR RIPPLE CURRENT
Frequency Coefcient
FREQUENCY (Hz) 50 120 300 1K 10K
~4.7µF 0.30 0.40 0.50 0.70 0.80
5.6~33µF 0.40 0.50 0.60 0.80 0.90
34~330µF 0.60 0.70 0.80 0.90 0.95
331~1000µF 0.65 0.90 0.90 0.98 1.00
1200µF Higher 0.85 0.90 0.95 0.98 1.00
ELECTRICAL CHARACTERISTICS
Operating Temperature Range : -40 ~ +105°C
Rated Voltage Range : 6.3 ~ 100V
Rated Capacitance Range : 4.7 ~ 15000µF
Capacitance Tolerance : -20 ~ +20% at 120Hz, 20°C
DC Leakage Current (µA) : I = 0.01CV or 3µA whichever is greater.
(After Rated Voltage Applied for 2 Minutes)
Dissipation Factor
W V (V) : 6.3 10 16 25 35 50 63 100
D.F. (%) : 22 19 16 14 12 10 9 8
When nominal capacitance is over 1000µF, tan δ shall be added 0.02 to listed value with increase of every
1000µF.
W V (V) : 6.3 10 16 25 35 50 63 100
Impedance : Z(120Hz) Z - 25°C / Z + 20°C 4 3 3 3 3 2 2 2
Z(120Hz)Z - 40°C / Z + 20°C 8 6 4 4 4 4 4 4
Endurance : After the rated voltage has been applied at 105°C for 3000 hours, the capacitors shall meet the
following requirements.
If Dimension is Down Size, Endurance will be Less 1000 hours than Standard
(a) Capacitance Change : Within ±20% of Initial Value
(b) Dissipation Factor: Not Exceeding 200% of Specied Value
(c) Leakage Current: Not Exceeding the Specied Value
Shelf Life : After having been placed at 105°C without voltage applied for 1000 hours, the capacitors shall
meet the same requirements as Endurance.
Rubber End Seal
L 15Min. D
±
0.5
F
±
0.5
5Min.
Vinyl Sleeve
(P.V.C)
L 15Min. D
±
0.5
F
±
0.5
Rubber End Seal
5Min.
Vinyl Sleeve
(P.V.C)
Rubber Stand-off
Dø < 20 Dø + 0.5
Dø ≥ 20 Dø + 1
L ≤ 16 L + 1.5Max.
L > 16 L + 2Max.
Dø = 8 & 10 L + 2.5Max.
Dø F dø
4.0 1.5 0.45
5.0 2.0 0.5
6.3 2.5
8.0 3.5 0.6
10.0 5.0
12.0
13.0
16.0 7.5 0.8
18.0
22.0 10.0 0.8 (1.0)
CASE SIZE 5x11 ~ 10x12 10x15 higher
LIFE 2000 3000
DIAGRAM OF DIMENSIONS Dimensions: mm