SQA401EJ
www.vishay.com Vishay Siliconix
S17-0423-Rev. A, 27-Mar-17 1Document Number: 75528
For technical questions, contact: automostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Automotive P-Channel 20 V (D-S) 175 °C MOSFET
Marking Code: QBXXXX
FEATURES
• TrenchFET® power MOSFET
• AEC-Q101 qualified d
• 100 % Rg and UIS tested
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
Notes
a. Package limited
b. Pulse test; pulse width 300 μs, duty cycle 2 %
c. When mounted on 1" square PCB (FR4 material)
d. Parametric verification ongoing
PRODUCT SUMMARY
VDS (V) -20
RDS(on) () at VGS = -4.5 V 0.125
RDS(on) () at VGS = -2.5 V 0.205
ID (A) -3.75
Configuration Single
Package PowerPAK SC-70
PowerPAK
®
SC-70-6L Single
3
G
2
D
1
D
S
4
D
5
D
6
Bottom View
2.05 mm
2.05 mm
1
Top View
S
7
S
G
D
P-Channel MOSFET
ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted)
PARAMETER SYMBOL LIMIT UNIT
Drain-source voltage VDS -20 V
Gate-source voltage VGS ± 12
Continuous drain current TC = 25 °C ID
-3.75
A
TC = 125 °C -3.75
Continuous source current (diode conduction) aIS3.75
Pulsed drain current bIDM -12
Single pulse avalanche current L = 0.1 mH IAS -8
Single pulse avalanche energy EAS 3.2 mJ
Maximum power dissipation bTC = 25 °C PD
13.6 W
TC = 125 °C 4.5
Operating junction and storage temperature range TJ, Tstg -55 to +175 °C
THERMAL RESISTANCE RATINGS
PARAMETER SYMBOL LIMIT UNIT
Junction-to-ambient PCB mount c RthJA 90 °C/W
Junction-to-case (drain) RthJF 11
SQA401EJ
www.vishay.com Vishay Siliconix
S17-0423-Rev. A, 27-Mar-17 2Document Number: 75528
For technical questions, contact: automostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
a. Pulse test; pulse width 300 μs, duty cycle 2 %
b. Guaranteed by design, not subject to production testing
c. Independent of operating temperature
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
SPECIFICATIONS (TC = 25 °C, unless otherwise noted)
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT
Static
Drain-source breakdown voltage VDS VGS = 0, ID = -250 μA -20 - - V
Gate-source threshold voltage VGS(th) VDS = VGS, ID = -250 μA -0.6 -1.0 -1.5
Gate-source leakage IGSS VDS = 0 V, VGS = ± 12 V - - ± 100 nA
Zero gate voltage drain current IDSS
VGS = 0 V VDS = -20 V - - -1
μA VGS = 0 V VDS = -20 V, TJ = 125 °C - - -50
VGS = 0 V VDS = -20 V, TJ = 175 °C - - -150
On-state drain current a ID(on) VGS = -4.5 V VDS 5 V -8 - - A
Drain-source on-state resistance a RDS(on)
VGS = -4.5 V ID = -2.4 A - 0.085 0.125
VGS = -4.5 V ID = -2.4 A, TJ = 125 °C - - 0.175
VGS = -4.5 V ID = -2.4 A, TJ = 175 °C - - 0.200
VGS = -2.5 V ID = -1.8 A - 0.160 0.205
Forward transconductance b gfs VDS = -10 V, ID = -2.4 A - 6 - S
Dynamic b
Input capacitance Ciss
VGS = 0 V VDS = -10 V, f = 1 MHz
- 265 330
pF Output capacitance Coss -7594
Reverse transfer capacitance Crss -5063
Total gate charge c Qg
VGS = -4.5 V VDS = -10 V, ID = -2.4 A
-3.45.5
nC Gate-source charge c Qgs -0.6-
Gate-drain charge c Qgd -1.1-
Gate resistance Rgf = 1 MHz 4.8 9.6 14.4
Turn-on delay time ctd(on)
VDD = -10 V, RL = 5.21
ID -1.9 A, VGEN = -4.5 V, Rg = 1
-2030
ns
Rise time c tr-1827
Turn-off delay time c td(off) -1928
Fall time c tf-812
Source-Drain Diode Ratings and Characteristics
Pulsed current a ISM - - -12.7 A
Forward voltage VSD IF = -2 A, VGS = 0 - -0.8 -1.2 V
SQA401EJ
www.vishay.com Vishay Siliconix
S17-0423-Rev. A, 27-Mar-17 3Document Number: 75528
For technical questions, contact: automostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted)
Output Characteristics
Transconductance
Capacitance
Transfer Characteristics
On-Resistance vs. Drain Current
Gate Charge
10
100
1000
10000
0
4
8
12
16
20
012345
Axis Title
1st line
2nd line
2nd line
ID- Drain Current (A)
VDS - Drain-to-Source Voltage (V)
2nd line
VGS = 1.5 V
VGS = 4 V
VGS = 3.5 V
VGS = 3 V
VGS = 2 V
VGS = 2.5 V
VGS = 4.5 V
VGS = 5 V
10
100
1000
10000
0
2
4
6
8
10
012345
Axis Title
1st line
2nd line
2nd line
gfs - Transconductance (S)
ID- Drain Current (A)
2nd line
TC= 25 °C TC=-55 °C
TC= 125 °C
10
100
1000
10000
0
100
200
300
400
500
0 4 8 12 16 20
Axis Title
1st line
2nd line
2nd line
C - Capacitance (pF)
VDS - Drain-to-Source Voltage (V)
2nd line
Crss
Coss
Ciss
10
100
1000
10000
0
2
4
6
8
10
012345
Axis Title
1st line
2nd line
2nd line
ID- Drain Current (A)
VGS - Gate-to-Source Voltage (V)
2nd line
T
C
= 25 °C
T
C
=-55 °C
T
C
= 125 °C
10
100
1000
10000
0.0
0.1
0.2
0.3
0.4
0.5
0246810
Axis Title
1st line
2nd line
2nd line
RDS(on) - On-Resistance (Ω)
ID- Drain Current (A)
2nd line
V
GS
= 4.5 V
V
GS
= 2.5 V
10
100
1000
10000
0
0.9
1.8
2.7
3.6
4.5
012345
Axis Title
1st line
2nd line
2nd line
VGS - Gate-to-Source Voltage (V)
Qg- Total Gate Charge (nC)
2nd line
ID= 2.4 A
VDS = 10 V
SQA401EJ
www.vishay.com Vishay Siliconix
S17-0423-Rev. A, 27-Mar-17 4Document Number: 75528
For technical questions, contact: automostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted)
On-Resistance vs. Junction Temperature
On-Resistance vs. Gate-to-Source Voltage
Source-Drain Diode Forward Voltage
Threshold Voltage
Drain Source Breakdown vs. Junction Temperature
Safe Operating Area
10
100
1000
10000
0.5
0.8
1.1
1.4
1.7
2.0
-50-25 0 255075100125150175
Axis Title
1st line
2nd line
2nd line
RDS(on) - On-Resistance (Normalized)
TJ- Junction Temperature (°C)
2nd line
I
D
= 2.4 A
V
GS
= 10 V
V
GS
= 4.5 V
10
100
1000
10000
0.0
0.2
0.4
0.6
0.8
1.0
012345
Axis Title
1st line
2nd line
2nd line
RDS(on) - On-Resistance (Ω)
VGS - Gate-to-Source Voltage (V)
2nd line
TJ= 25 °C
TJ= 150 °C
10
100
1000
10000
0.001
0.01
0.1
1
10
100
0 0.2 0.4 0.6 0.8 1.0 1.2
Axis Title
1st line
2nd line
2nd line
IS- Source Current (A)
VSD - Source-to-Drain Voltage (V)
2nd line
T
J
= 150 °C T
J
= 25 °C
10
100
1000
10000
-0.5
-0.3
-0.1
0.1
0.3
0.5
-50 -25 0 25 50 75 100 125 150 175
Axis Title
1st line
2nd line
2nd line
VGS(th) Variance (V)
TJ- Temperature (°C)
2nd line
I
D
= 5 mA
I
D
= 250 µA
10
100
1000
10000
-27
-26
-25
-24
-23
-22
-21
-50-25 0 255075100125150175
Axis Title
1st line
2nd line
2nd line
VDS - Drain-to-Source Voltage (V)
TJ- Junction Temperature (°C)
2nd line
ID= 10 mA
10
100
1000
10000
0.01
0.1
1
10
100
0.01 0.1 1 10 100
Axis Title
1st line
2nd line
2nd line
ID- Drain Current (A)
VDS - Drain-to-Source Voltage (V)
(1) VGS > minimum VGS at which RDS(on) is specified
IDM limited
Limited by RDS(on) (1)
TC= 25 °C
Single pulse BVDSS limited
1 s, 10 s, DC
100 ms
1 ms
100 µs
10 ms
SQA401EJ
www.vishay.com Vishay Siliconix
S17-0423-Rev. A, 27-Mar-17 5Document Number: 75528
For technical questions, contact: automostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
THERMAL RATINGS (TA = 25 °C, unless otherwise noted)
Normalized Thermal Transient Impedance, Junction-to-Ambient
Normalized Thermal Transient Impedance, Junction-to-Foot
Note
• The characteristics shown in the two graphs
- Normalized Transient Thermal Impedance Junction-to-Ambient (25 °C)
- Normalized Transient Thermal Impedance Junction-to-Foot (25 °C)
are given for general guidelines only to enable the user to get a “ball park” indication of part capabilities. The data are extracted from single
pulse transient thermal impedance characteristics which are developed from empirical measurements. The latter is valid for the part
mounted on printed circuit board - FR4, size 1" x 1" x 0.062", double sided with 2 oz. copper, 100 % on both sides. The part capabilities
can widely vary depending on actual application parameters and operating conditions.
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package / tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?75528.
10
-3
10
-2
1 10 60010
-1
10
-4
100
2
1
0.1
0.01
0.2
0.1
0.05
0.02
Single Pulse
Duty Cycle = 0.5
Square Wave Pulse Duration (s)
tneisnarT evitceffE dezilamroN
ecnadepmI lamrehT
1. Duty Cycle, D =
2. Per Unit Base = R
thJA
= 175 °C/W
3. T
JM
- TA = PDMZthJA(t)
t
1
t
2
t
1
t
2
Notes:
4. Surface Mounted
P
DM
10
-3
10
-2
11010
-1
10
-4
2
1
0.1
0.01
0.2
0.1
0.05
0.02
Single Pulse
Duty Cycle = 0.5
Square Wave Pulse Duration (s)
tneisnarT evitceffE dezilam
r
oN
ecnade
p
mI
la
m
r
e
hT
Vishay Siliconix
Package Information
Document Number: 73001
06-Aug-07
www.vishay.com
1
PowerPAK® SC70-6L
DIM
SINGLE PAD DUAL PAD
MILLIMETERS INCHES MILLIMETERS INCHES
Min Nom Max Min Nom Max Min Nom Max Min Nom Max
A0.675 0.75 0.80 0.027 0.030 0.032 0.675 0.75 0.80 0.027 0.030 0.032
A1 0 - 0.05 0 - 0.002 0 - 0.05 0 - 0.002
b0.23 0.30 0.38 0.009 0.012 0.015 0.23 0.30 0.38 0.009 0.012 0.015
C0.15 0.20 0.25 0.006 0.008 0.010 0.15 0.20 0.25 0.006 0.008 0.010
D1.98 2.05 2.15 0.078 0.081 0.085 1.98 2.05 2.15 0.078 0.081 0.085
D1 0.85 0.95 1.05 0.033 0.037 0.041 0.513 0.613 0.713 0.020 0.024 0.028
D2 0.135 0.235 0.335 0.005 0.009 0.013
E1.98 2.05 2.15 0.078 0.081 0.085 1.98 2.05 2.15 0.078 0.081 0.085
E1 1.40 1.50 1.60 0.055 0.059 0.063 0.85 0.95 1.05 0.033 0.037 0.041
E2 0.345 0.395 0.445 0.014 0.016 0.018
E3 0.425 0.475 0.525 0.017 0.019 0.021
e0.65 BSC 0.026 BSC 0.65 BSC 0.026 BSC
K0.275 TYP 0.011 TYP 0.275 TYP 0.011 TYP
K1 0.400 TYP 0.016 TYP 0.320 TYP 0.013 TYP
K2 0.240 TYP 0.009 TYP 0.252 TYP 0.010 TYP
K3 0.225 TYP 0.009 TYP
K4 0.355 TYP 0.014 TYP
L0.175 0.275 0.375 0.007 0.011 0.015 0.175 0.275 0.375 0.007 0.011 0.015
T0.05 0.10 0.15 0.002 0.004 0.006
ECN: C-07431 − Rev. C, 06-Aug-07
DWG: 5934
E2
BACKSIDE VIEW OF SINGLE BACKSIDE VIEW OF DUAL
Notes:
1. All dimensions are in millimeters
2. Package outline exclusive of mold flash and metal burr
3. Package outline inclusive of plating
PIN1
PIN6 PIN5
PIN4
PIN2 PIN3
A
Z
DETAIL Z
z
D
E
K1
K2
C
A1
K3K2 K2
e b
b e
PIN6 PIN5 PIN4
PIN1 PIN3
PIN2
E1
E1
E1
L
L
K4
K
K
K
D1 D2 D1 D1
K1
E3
Application Note 826
Vishay Siliconix
Document Number: 70486 www.vishay.com
Revision: 21-Jan-08 11
APPLICATION NOTE
RECOMMENDED PAD LAYOUT FOR PowerPAK® SC70-6L Single
1
0.300 (0.012)
0.350 (0.014)
2.200 (0.087) 1.500 (0.059)
0.650 (0.026)
0.950 (0.037)
0.300 (0.012)
0.355 (0.014)
0.235 (0.009)
0.475 (0.019)
0.870 (0.034)
0.275 (0.011)
0.350 (0.014)
0.550 (0.022)
0.650 (0.026)
Dimensions in mm/(Inches)
Return to Index
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 01-Jan-2019 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
