KokoKop .190 MOUNT PANEL LIGHTS 30 Series Data Display Products - Mounting Hardware Provided - For Detailed LED Data, See Discrete Section, MODEL 125 Voltage/Current Design Max Vlif ViNf Table | SV/27mMA 5.5V/40mA 12V/27MA 14V/35mA 15V/24mA 16.5V/28mMA 24V/17mMA 26V/20MA 28V/16.5mMA 30V/18MA 48V/15mA SOV/16MA 60V/9mA 65V/10mA 120VAC/3.5mA | 130VAC/4mA Table I! 5V/15mA 6V/25Ma 12V/15mA 14V/20mMA 15V/15mA 16.5V/18MA 24V/15mA 26V/18MA 28V/15mA 30V/17MA 48V/9.5mA 50V/10mA 60V/7mA 65V/8mMA 120VAC/3.5mA | 130VAC/4mA 465 300 Description 635 2.1 41 |Low Power 583 1.6 41 |Low Power 1 |Low Power | |Bi-Color, Red Cathode 565 2.1 630/565 5/5 D000 SENNG0NVNNOTONOVOVUSONOVNDSOON [1] Model 305 has no lens. Omit Lens Diffusion and Color (e.g. 305-RG5H-0). [2] lv = typical luminous intensity @ If = 20mA(Ta =25C). lv is measured without lenses. For Low Power LEDs, If = 2mA. [3] D = Diffused, C = Clear Tinted, W = Water Clear. [4] See Voltage/Current table for design specifications. Design current for low power LEDs = 2mA. [5] Ta = 25C. Voltage 2 indicates external resistor required. Voltages 5H through 60H are VDC. For AC operation, insert D after Voltage (e.g. 24HD). D indicates built-in rectifier; not required for 15H or less, or 120VAC or greater. DC operation not available for 120V. Bi-Color not available in AC voltages. [6] Omit H when selecting a voltage (e.g. 31-RLP12). [7] Select -CW or -NW lens only. [8] Omit Lens Diffusion when selecting smoked lens (e.g. 31-RQ28H-SO). {9] Select LED with mcd = 200. To Order: Select one BOLD component from each SHADED column in the table except as noted. Example: Part Number 34-BCR24H-CRO: Continued... 445 S. Douglas St., El Segundo CA 90245-4630 (800) 421-6815 (310) 640-0442 FAX (310) 640-7639 49 1998 Data Display Products KoKolop Data Display Products .190 MOUNT PANEL LIGHTS 30 Serie .14(3.56) - 68(17.3) .35(8.9) .025(0.63)sq 185(4.7) 68(17.3) 35(8.9 025(0.63}sq = + .025(0.63) 065(1.65) : | ook .250(6.35) 2.115(2.9) (| a - @.250(6.35) .205(5.2) G) 145(2. = wt 115129" Cathode /| | 20 Cathode], ea @.190(4.8) 4) @.190(4. 305 (no lens) 31 ,085(1.65) 1 [= | 35/8. a 025(0.63)sq @.165(4.2) + @.250(6.35) @24(5.3) Q. ore (( 4) | 7 | 180 Ley Cathode 7 | hie. . @.190(4.8) .28(7.1) se 3) 34 (flush lens) \S Standard Wire Leads: 6.0 total length(nominal) /.50 stripped (nominal), red anode/black cathode, 24 AWG TPB UL1061 insulation. Contact factory for other lengths, gauges and colors. 50 \\ XS TC3 & NW3, Mounting Hardware All dimensions are in inches(mm) Tolerances: .xx"(.x) +.025"(.63) / .xxx"(.xx}+.010"(.25) Specifications are subject to change without notice. 445 S. Douglas St., El Segundo CA 90245-4630 e (800) 421-6815 (310) 640-0442 e FAX (310) 640-7639 1998 Data Display Products