The CXA10 series comprising of five different models delivers
single and dual output voltages covering 3.3 V, 5 V, 12 V, ±5 V, ±12
V and ±15 V. The series has a wide 4:1 input voltage range of
18Vdc to 75 Vdc. The CXA10 has been designed as a competitive
open-frame alternative for the communications market. The
product is supplied in the industry standard footprint of 2.0 x 1.0 x
0.394 inches. Other product features include overvoltage
protection, short-circuit protection and remote ON/OFF.
All components are placed in a fully automated environment.
Planar magnetics are used in the design to improve the reliability
and reduce the profile of the dc-dc converter. The series has full
international safety approvals reducing system compliance costs,
and it has a basic insulation system from input to output making it
suitable for a wide variety of applications.
Embedded Power for
Business-Critical Continuity
CXA10
Single output
Special Features
4:1 input voltage range
Operating ambient
temperature of -40°C to
+70°C in still air
High demonstrated reliability
with conservative
component deratings
Complies with
ETS 300 019-1-3/2-3
Complies with ETS 300 132-2
input voltage and current
requirements
Fully compliant with
ETS 300 386-1
Pin compatible with NFC10
and BXA10 series
Basic insulation system
(input to output)
2 year warranty
Total Power: 10W
Input Voltage: 18 - 75VDC
# of Outputs: Single
Safety
UL/cUL CAN/CSA 22.2
No. 60950-00 : UL 60950-1
File No. E132002
VDE Certificate No.112607.
File No. 1040100-3336-0136
CB Report and Certificate to
IEC60950-1, #DE 1-30686
Rev.12.04.07
cxa10
1 of 4
Rev.12.04.07
cxa10
2 of 4
Embedded Power for
Business-Critical Continuity
All specifications are typical at nominal input, full load at 25°C unless otherwise stated.
Specifications
OUTPUT SPECIFICATIONS
Voltage accuracy ±1.0%
Line regulation Singles/dual positives ±0.1%
(LL to HL) Dual negatives ±0.2%
Load regulation Full load to ±0.15%
(not incl. cross reg.) minimum load
Min. load All outputs 10%
Ripple and noise 3.3 V and 5.0 V 30 mV pk-pk
20 MHz bandwidth All others 60 mV pk-pk
All models 12 mV rms
Temperature coefficient ±0.01%/°C
Overvoltage protection Clamp type (See table and Notes 3, 4)
Short circuit protection Hiccup Continuous
Short <20 mΩ auto. recovery
Transient response Min. load to FL ±1.0%
Load cross regulation Min. load to FL (See Note 1) ±5.0%
INPUT SPECIFICATIONS
Input voltage range 48 Vin nominal 18-75 Vdc
Input fuse (See Note 10) 1.5 A HRC
Max. input rise 48 V ETS300 132-2 5 V/ms
and fall time
UVLO turn ON voltage (See Note 5) 94%
UVLO turn OFF voltage (See Note 5) 86%
Remote ON/OFF (See Note 7)
Logic compatibility CMOS/TTL/Open Collector
ON Open circuit
OFF <1 Vdc
EMC CHARACTERISTICS
ETS 300 386-1 table 5
Conducted emissions EN55022 (See Note 6) Level A
EN55022, external filter, Level B
VDE0878, 48 V models
Radiated emissions See Application Note 100
ESD air EN61000-4-2, level 3
ESD contact EN61000-4-2, level 4
Surge (500 V) EN61000-4-5, level 3, 4
Fast transients EN61000-4-4, level 3, 4
Radiated immunity EN61000-4-3, level 3
Conducted immunity EN61000-4-6, level 3
GENERAL SPECIFICATIONS
Efficiency See table
Isolation voltage Input/output test voltage 1500 Vdc
Switching frequency Fixed 400 kHz
Approvals and standards
EN60950, UL1950
(See Notes 7,8,9,10,11) CSA C22.2 No. 950
Material flammability UL94V-0
Weight 12 g (0.42 oz)
MTBF MIL-HDBK-217F 456,621 hours
(Representative model Parts stress method
48S05J @ 48 Vin) Ground Benign @ 25 °C
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating ambient -40 °C to +70 °C,
temperature See curves
Non-operating -55 °C to +105 °C
ETS 300 019-2-3 Classes T3.1 to T3.5
Air temperature Low: IEC 68-2-1 -40 °C
High: IEC 68-2-2 +70 °C
Change: IEC 68-2-14 -40°C to +70 °C
Relative humidity IEC 68-2-56 10% to 100% RH
IEC 68-2-30 Condensation
Vibration, Class 3M5 IEC68-2-6 2-9 Hz, 3 mm disp.
9-200 Hz 1 g MIL-STD-202F Method 204 cond. A
Shock, Class 3M5 IEC-68-2-29 Method 213B cond. A
MIL-STD-202F
Rev.12.04.07
cxa10
3 of 4
Embedded Power for
Business-Critical Continuity
Specifications Contd.
INPUT OUTPUT OVERVOLTAGE OUTPUT TYPICAL MODEL
VOLTAGE VOLTAGE PROTECTION (3,4) CURRENT (MAX.)(9) EFFICIENCY NUMBER(7,12,13)
18-75 Vdc 3.3 V 3.9 V 2.4 A 78% CXA10-48S3V3J
18-75 Vdc 5 V 6.8 V 2 A 81% CXA10-48S05J
18-75 Vdc 12 V 16 V 0.83 A 83% CXA10-48S12J
18-75 Vdc ±5 V ±6.8 V 1 A 81% CXA10-48D05J
18-75 Vdc ±12 V ±16 V 0.41 A 83% CXA10-48D12J
18-75 Vdc ±15 V ±19 V 0.33 A 81% CXA10-48D15J
Notes
1Negative output voltage deviation when positive load is changed.
2Guaranteed minimum output voltage range.
3TVS spec: See Application Note 100 on our web site.
4On dual output models, OVP protection is on negative outputs only.
5With respect to minimum input voltage.
6With one external ITW Paktron 4.7 μF film capacitor across the input.
7For units with optional remote ON/OFF, please add the suffix ‘-S’ to the model
number, e.g. CXA10-48S05-SJ. Additional alphanumeric suffixes maybe
added to indicate minor modifications not affecting the safety approvals.
8Unit provides basic insulation up to the 75 Vdc maximum input voltage.
9Maximum continuous output power not to exceed 10 Watts. 7.9 Watts for
the 3V3 model.
10 User must provide 1.5 A in line fuse in order to comply with safety approvals.
11 Maximum temperature on components Q100, CR101, CR102 not to exceed
120 °C. See Application Note 100 for details.
12 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE
RoHS 5/6 (non Pb-free) compliant versions may be available on special request,
please contact your local sales representative for details.
13 NOTICE: Some models do not support all options. Please contact your local
Artesyn representative or use the on-line model number search tool at
http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
DERATING CURVE
(Output Power %)
AMBIENT TEMPERATURE (°C)
Figure 1: Natural Convection (0.1m/s) Typical derating - See Application Note 100
100%
75%
50%
25%
0% 0°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C 80°C 90°C 100°C
Output Power (%)
27.5%
-40°C -30°C -20°C -10°C
0.400
(10.16) 0.200
(5.08) 0.300
(7.62)
Ø0.040 ±0.002
Dia. (Ø1.02 ±0.05)
0.020
(0.50)
0.100
(2.54)
345
621
0.142 (3.60)
± 0.012 (0.3)
±0.020 (0.5)
2.000
(50.80)
0.800
(20.32)
0.600
(15.24)
1.000 (25.40)
±0.020 (0.5)
0.394
(10.00)
Max. HEIGHT
ALL DIMENSIONS IN INCHES (mm)
Tolerance on all dimensions of ±0.005 (0.127)
Unless otherwise specified
± 0.012 (0.3)
0.536 (13.60)
0.400
(10.16) 0.400
(10.16)
OPEN-
FRAME
PIN CONNECTIONS
PIN NUMBER SINGLE OUTPUT DUAL OUTPUT
1 + Input + Input
2 – Input - Input
6 * Remote ON/OFF Remote ON/OFF
3 + Output + Output
4 No Pin Common
5 - Output - Output
* Optional remote ON/OFF pin. Please add the suffix ‘-S’ to the model
number, e.g. CXA10-48S05-SJ (See Note 7).
CAUTION: Hazardous internal voltages and high temperatures.
Ensure that unit is not user accessible.
Embedded Power for
Business-Critical Continuity
Rev.12.04.07
cxa10
4 of 4
Emerson Network Power and the Emerson
Network Power logo are trademarks and
service marks of Emerson Electric Co.
©2007 Emerson Electric Co.
Emerson Network Power.
The global leader in enabling
business-critical continuity.
EmersonNetworkPower. com
AC Power
Connectivity
DC Power
Embedded Power
Inbound Power
Integrated Cabinet Solutions
Outside Plant
Precision Cooling
Site Monitoring and Services
Americas
5810 Van Allen Way
Carlsbad, CA 92008
USA
Telephone: +1 760 930 4600
Facsimile: +1 760 930 0698
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
Telephone: +44 (0) 1384 842 211
Facsimile: +44 (0) 1384 843 355
Asia (HK)
16th - 17th Floors, Lu Plaza
2 Wing Yip Street, Kwun Tong
Kowloon, Hong Kong
Telephone: +852 2176 3333
Facsimile: +852 2176 3888
For global contact, visit:
www.powerconversion.com
technicalsupport@powerconversion.com
While every precaution has been taken to ensure
accuracy and completeness in this literature, Emerson
Network Power assumes no responsibility, and disclaims
all liability for damages resulting from use of this
information or for any errors or omissions.