IBS ST ZF 24 BK RB-T Order No.: 2750769
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2750769
PHOENIX CONTACT Deutschland GmbH Page 2 / 5
http://www.phoenixcontact.de Feb 8, 2011
The IBS ST 24 BK LB-T module is equipped with an additional local bus interface with a 15-pos. D-SUB connector. The
flat pack design input/output modules from PHOENIX CONTACT, for example, and frequency inverters with local bus
interfaces can be connected to this interface.
An additional remote bus connection is provided by the IBS ST 24 RB-T. All devices with an INTERBUS remote bus
interface can be connected in this remote bus branch.
The input/output bus terminal modules with additional fiber optic interfaces are available for integrating INTERBUS
compatible devices into an INTERBUS fiber optic network.
All INTERBUS bus terminal modules make it possible to individually ebnable/disable the additional bus interfaces. To
some extent, they perform the role of two bus terminal modules in the INTERBUS system and are also treated as such in
the address lists and configuring software (CMD).
Note: When configuring buses branching off from the bus terminal modules, please observe the topology supported by
INTERBUS controller boards.
Technical data
Interface
Fieldbus system INTERBUS
Name INTERBUS remote bus
Type of connection 9-pos. D-SUB plug/socket
Designation connection point Incoming/Outgoing Remote Bus
Number of positions 9
Fieldbus system Lokalbus
Name ST local bus
Fieldbus system INTERBUS
Name INTERBUS remote bus branch
Type of connection 9-pos. D-SUB female
Number of positions 9
Power supply for module electronics
Supply voltage 24 V DC
Supply voltage range 20 V DC ... 30 V DC (including ripple)
Ripple 3.6 Vpp within the allowable voltage range
Current consumption Typ. 150 mA (without ST module expansions)
General data
Width 81 mm
Height 117 mm
Depth 116 mm
Weight 470 g